Can anyone assist me in solving this problem:
DTSTransformCopy: ValidateSchema failed; see Extended Error Information.
TransformCopy 'DTSTransformation_10' validation error: Source column too narrow to contain a valid value of destination column's datatype for column pair 1 (source column 'Col010'(DBTYPE_STR), destination column 'CHECKDAT' (DBTYPE_DBTIMESTAMP)).
Any help would be greatly appreciated.
Thanks,
Rey
Hi All,Just wondering if you perform an update using a where condition thatactually returns no rows to be updated, does @@Error contain an errormessage afterwords?We want to fire an update ona table against records that may or maynot exists. As a matter of course we test for an @@Error afterwardsand rollback our transaction and exit our stored proc if an error isreturned.However, we don't want this to happen if there are no records in thetarget table that match the where clause of the update statement.So, if no records are found, does this raise an error?Many thanks in advance!Much warmth,Murrau
View 2 Replies View RelatedSystem.Data.SqlClient.SqlError: The backup of the file or filegroup "CUSTBilling" is not permitted because it is not online. BACKUP can be performed by using the FILEGROUP or FILE clauses to restrict the selection to include only online data. (Microsoft.SqlServer.Smo)
I did a file group backup and restore of a database and then when I tried to perform a full backup I am getting the above error. Any thoughts. I indeed happen to see this error http://support.microsoft.com/default.aspx/kb/921106 but not sure if both errors are the same.
Santhosh
http://sqlspy.blogspot.com
I have an Access 2.0 database that holds call data on a mapped drive. I am running MS SQL Server 2000. I can open it and view the records inside. I can even run the query below and get results, if I removed the CallDate and CallTime parameters.
SELECT CallDate, CallTime, Mid(CallRecordData, 68, 3) AS Extension, 'I' AS Direction, Mid(CallRecordData, 34, 11) AS Called,
Val(Mid(CallRecordData, 18, 2)) + Val(Mid(CallRecordData, 21, 2))/ 60 AS Minutes, Val(Mid(CallRecordData, 21, 2)) AS Seconds
FROM CallRecords
WHERE (CallDate = ?) AND (CallTime >= ?) AND (CallTime < ?) AND (Mid(CallRecordData, 30, 1) <> '9')
When I preview in the Transform Data Task, I get:
Package Error
Error Source: Microsoft JET Database Engine
Error Description: No value given for one or more required parameters.
When I look at the parameters, they are listed. I check their values, and they have the appropriate values (DateCalled, String, 07/14/2005) (StartTime, String, 06:30) (EndTime, String, 07:00)
When I run it in the build query or in Access with a linked table to the source, I can enter the values when asked for them and it works.
Thanks for any help you can provide.
I get an error message when deploying reports to the reportserver from microsoft visual studio.
error message : Error rsAccessDenied : The permissions granted to user '' are insufficient for performing this operation.
TargetServerURL : http://server.com/ReportServer$sql_2005
The Report server is configured to use a custom security extension. i can access the reportserver.
It looks like when i deploy the reports from VS. it does not pass any credentials to the report server. From the error message it looks like there is no username . How do i deploy reports to report server if we are using a custom security extension. How do i grant user rights to deploy report if we are using a custom security extension. Any idea. Thanks!
chi
I've successfully created a Linked Server that connects a local DB Engine with another DB Engine through an ip over an extranet. I am able to run simple Select statement queries on the Local DB Engine and get results from the linked server. However when attempting to perform more complex queries that join tables from the linked server with tables from the local DB server, I get the following error message after several minutes of execution:
OLE DB provider "SQLNCLI11" for linked server "<ip of Linked Server>" returned message "Protocol error in TDS stream".
OLE DB provider "SQLNCLI11" for linked server "<ip of Linked Server>" returned message "Communication link failure".
Msg -1, Level 16, State 1, Line 0
Session Provider: Physical connection is not usable [xFFFFFFFF].
OLE DB provider "SQLNCLI11" for linked server "<ip of Linked Server>" returned message "Communication link failure".
Msg -1, Level 16, State 1, Line 0
Session Provider: Physical connection is not usable [xFFFFFFFF].
OLE DB provider "SQLNCLI11" for linked server "<ip of Linked Server>" returned message "Communication link failure".
Msg 10054, Level 16, State 1, Line 0
TCP Provider: An existing connection was forcibly closed by the remote host.
How I can resolve it. I've read on Distributed Transactions but I understand that it only applies to manipulation statements?
Both are SQL servers. Linked Server is SQL2008R2 if not mistaken. Local DB Engine is SQL2014.
Hi All,
We seem to be being plagued by the error below by our SQL Server agent. This happens almost everytime we restart the server that has been running for a day or two.
Our SQL Server Agent uses a none expiring domain credential. I understand that this problem only happens when the profile being used by the SQL Servr Agent has changed (password change). What puzzles me is that the login is A ok and no changes has been made to it's password.
We always resolve this problem by changing the login used in the SQL Server Agent to local and after that, returning it back to it's original domain login. Unfortunately, we cant always do this everytime something goes wrong.
Can anyone please help us shed a light on this? We're using SQL2k with SP3a. Thanks!
Error:
An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation on the SQLServerAgent service.
Regards,
Joseph
I need to perform some division on the results of two alias columns that perform counts in a query. What is the best way to do this?
View 7 Replies View RelatedHow to delete a record from a parent table, all relating records in the child tables should also delete.
How to do it by MSSQL 7.0
ANB
I have two tables that I have to compare:
Table:PR
WBS1 WBS2 WBS3
123-456 1000 01
123-456 1000 02
123-456 2000 02
567-890 2000 01
567-890 2000 02
Table:PR_Template
WBS2 WBS3
1000 00
1000 01
1000 02
2000 00
2000 01
2000 02
After Insert I should have:
wbs1 wbs2 wbs3
123-456 1000 00
123-456 1000 01
123-456 1000 02
123-456 2000 00
123-456 2000 01
123-456 2000 02
567-890 1000 00
567-890 1000 01
567-890 1000 02
567-890 2000 00
567-890 2000 01
567-890 2000 02
Basically, I need to insert the wbs2 and wbs3 where it does not exist in each wbs1.
What I have now will find the values that need to be inserted for a particular project but I don't know how to go through each project and perform the insert:
Select * from PR_template Where Not Exists
(Select Wbs1, Wbs2, Wbs3 from PR where PR.WBS2 = PR_Template.WBS2
And PR.WBS3 = PR_Template.Wbs3 and pr.wbs1 = '123-456')
Order by wbs2, wbs3 asc
Thank You
Hi. I'm trying to find out which "cases" have a new items added to our database. I have provided a sample layout.
ID ParentID Name CreateDate
358 2 SMITH, JOHN 3/3/2008 11:15:23 am
359 358 Invoice 3/5/2008 4:13:52 pm
360 358 Shipping 3/5/2008 5:11:09 pm
361 358 Receiving 3/6/2008 4:22:01 am
The main ID for this is 358. The invoice, shipping, and receiving items are child items. I would like to run a query that can report which cases have newly added items. This is hierarchical I guess and I'm quite lost. I hope this makes sense. Thanks for any help!
I need to do SUM on a column values and then subtract it from the SUM of values on a column from another table. I am using SQL server Management Studio, but getting the errors on the following Query
SELECT note_id, cap_int_amt)- SUM (ttl_cap_int_amt) as SUM1,
sum(orig_fee_amt)-sum(ttl_qualfyng_fee_amt) as SUM2
FROM [spstrd00_starrpt].[dbo].[rpt23t]
where [rpt20t].note_id =[rpt23t].note_id
ERROR Message
Msg 208, Level 16, State 1, Line 1
Invalid object name 'dbo.rpt23t'.
Msg 4104, Level 16, State 1, Line 7
The multi-part identifier "rpt20t.note_id" could not be bound.
Msg 207, Level 16, State 1, Line 8
Invalid column name 'ttl_qualfyng_fee_amt'.
Hello,
I want to write a query that joins data in a different table based on a column value. The table is for a "Playlist" and holds play list items. The items can be video, audio, images, etc. The playlist table looks like this:
Table_Playlist
-----------------
ID (int)
MediaType (char)
MediaId (int)
Table_Audio
-----------------
MediaId (int)
Table_Video
--------------
MediaId (int)
If the Table_Playlist.[MediaType] column value = "Audio" then I want to join to the Table_Audio table. If the value = "Video" then I need the video table.
Hope that makes sense. Thanks
Hi,
I have got a column with the string "I too Love Sql Server". I am trying an output as shown below:
I want to divide this into 4 columns :
Column1 Column2 Column3 Column4
I too Love Sql Server I.t.L.S.S
The Column 4 contains the first letter of each word. If the string contains only 2 words, Eg: "Sql Server" then Column 2 will be empty and only Column 1,3 and 4 will be filled.
How do I do this?
Hi,Have a database that contains various tables.I need to run a query on two tables.Table A contains a column called TitlesTable B contains a column called Uni_TitlesIn Table B's column it contains multiple titles as shown belowseparated by semi-colons in each row.Table B Uni-Title Column__________________________Row 1: Landlord and tenant; Leases; Rent reviewsRow 2: Acquisitions; Advisers; Appointment; Contract termTable A - Titles Column_________________________Table A's column contains a only one of the words in Table B's columni.e. Landlord and tenantI would like to obtain a count of how many times the same word orphrases appears in the column of Table B.ThanksSteve
View 2 Replies View Related
Hi,
I want to copy xls file from remote server to my server.
i want to use xp_cmdshell to perform this operation.
can anybody help me out how to pass parameter to xp_cmdshell.
thanks in advance,
Chetan S. Raut.
I have to look up a mapping table and add 5 more columns from the mapping table if the look on the first column in the mapping table and corresponding column in source is successful.
But if there is no matching record in then mapping table I still need the record to pass through with NA values.
Please help?
Hello All,
I am tackling with unique request. I have to download the ".zip" files from the https and uncompress them. Now, the fetch process works fine when I am downloading the files. Using .net and .IO namespaces from system library.
Similarly after downloading I have to uncompress the files as these files are treated by compressed file folders by windows xp. I know it can be achieved by using the IO.compression class form system namespace.
But the only trouble here is IO.compression supports ".gz" and "Gzipstream.Uncompress" and I wonder how I would be able to get the ".zip" and "Zipstream.uncompress" done.
Thanks a million in all your help and advice. Also I appreciate for your time.
Regards
Sandesh
hii,,i am using asp.net 2005 and sql server 2005.i have a web page in which i can enter details and it gets stored in a table in a database..in the table thrs a column called as sme_id,,what i want is when one inserts a new sme_id from the page,,it should check in the table so tht no duplicate sme_id wil b generated..,,this code is workin fine,,i just want to implement the above condition...here is the insert code which i have used along with sql datasource:::__________________________
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConflictDetection="CompareAllValues"
ConnectionString="<%$ ConnectionStrings:sme_trackerConnectionString %>"
InsertCommand="INSERT INTO SME_Master(SME_Id, FirstName, LastName, Type_of_SME, Agency_id, Agency_Name, Email, Address, Phone, Mobile, Fax, TimeZone_Id, Experience, City, State, Status, Level_Of_Exam, Other_Comments, Certificate, Expertise)
VALUES (@SME_Id, @FirstName, @LastName, @Type_of_SME, @Agency_id, @Agency_Name, @Email, @Address, @Phone, @Mobile, @Fax, @TimeZone_Id, @Experience, @City, @State, @Status, @Level_Of_Exam, @Other_Comments, @Certificate, @Expertise)"
OldValuesParameterFormatString="original_{0}" SelectCommand="SELECT * FROM [SME_Master]">
_______hope u got my problem,,,,,reply asap....thnks in advance
Hi,
I was wondering if anyone knows of any way, including third party tools, to replicate a design change on a table across many different databases. I have written an ASP script that allows me to copy multiple tables to multiple databases in one go but I need something that will allow me to replicate the design of a table by comparing source and destination tables. So far I have scripted most of it but I have no idea on which system table to get the identity information and it seems there must be an easier way!
Any help would be appreciated,
Seoras
I`m having difficulty performing a SQL dump using a network drive. I have successfully created a backup device on a network drive but when I go to perform a backup using it I get the following error message: "Can`t open dump device `RSS4DATARSA3_Dump.Dat`, device error or device off line. Please consult the SQL Server error log for more details. (Message 3201)" I can successfully perform a backup using a local drive but not this network drive. I have checked the permissions on the network drive and is seems ok. I use the following command to try to perform the backup: "DUMP DATABASE RSA3 TO DISK = `Rss4DataRSA3_Dump.Dat WITH STATS = 10, INIT". Any help would be most appreciated. Thanks in advance!
View 2 Replies View RelatedIt just seems like I should be able to use a 4 part naming convention to compare database tables that exist on 2 servers. It isn't always possible to link dbs because of security. Is there any other way to query between servers?
Thanks!
I have listed below a sql statement generated by a MS Access query. The Access is the frontend, using a SQL Server 2005 View as the backend. I have already corrected the obvious differences between Access and SQL Server syntax, such as replacing UCase$ with UPPER,
replacing '_' with '.' between the db owner and view name, replacing IIF with IF, and replacing "D" with 'D' and "E" with 'E', but it still generates syntax errors (of course, with no explanation). As you can see, it is SUMing a field based on whether the value is 'D' or 'E', then using those calculated values to calculate a percentage. Can anyone out there let me know what I'm doing wrong?
SELECT dbo_vwDisplayUserList.DEPT_DESC, Sum(IIf(UCase$([Essential_Code])="D",1,0)) AS Department_Essential, Sum(IIf(UCase$([Essential_Code])="E",1,0)) AS EOC_Essential, Count(dbo_vwDisplayUserList.UserID) AS Total_Employees, Int([Department_Essential]/[Total_Employees]*100) AS [%Department_Essential], 100-Int([Department_Essential]/[Total_Employees]*100) AS [%EOC_Essential]
FROM dbo_vwDisplayUserList
GROUP BY dbo_vwDisplayUserList.DEPT_DESC
ORDER BY dbo_vwDisplayUserList.DEPT_DESC
Basically I have a table with 2 fields UserId (string) and UserName (uniqueidentifer). The default value for UserId is newid().
I can perform an insertion with
INSERT INTO MyTable(UserName) VALUES ('Foo Bar');
But I would like to retrieve the UserId that has just been created. How do I achieve that?
Thanks in advance,
Joannes
I have a single table named PROCESS which contain following three fields
ProcessID
ParentID,
info
* Every process have a unique ProcessID and ave single parent process which is identified by ParentID.
* If a process does not have a Parent then its ParentID value is -1.
*Only single level of Parent-child hierarchy is maintained.
Can anyone please tell me the Query that uses Recursive JOINS to retrieve the ProcessID s based in following Conditions.
1. if the Parent's 'info' field contains given value then retrieve all the process under it.
2. Retrive all the process whose 'info' contains given value and excluding the Processes resulted from 1st conditiion
Thanks in advance
Bharath Booshan L
I am trying to a simple insert statement from a remote applicationagainst a sql server 2005 database. To fix the problem I was having,I had to grant the Login I was using the role of sysadmin. However Idon't want this user to have that kind of control, what would be thebest role to allow the user full access(including remoting) to onlyone particular database?
View 5 Replies View RelatedHi,I am trying to concoct a query that will join rows on the basis of awhitespace insensitive comparison. For instance if one row has the value'a<space>b' and another has the value 'a<space><space>b' I want them to beconsidered equal (but not the same as 'ab')I am happy to do some T-SQL if that helps. Also I have a full-text index onthe column in question, but note that I am comparing rows against eachother, not to a fixed string.This is for a one-off job, so if there is no obvious way to do it on thedatabase, I will just bcp out the data and knock up some perl or somethingto do it. All other things being equal I would rather do it on the databasethough.Many thanksAndy
View 11 Replies View Related
Hi,
I am having an issue when performing an FTP atsk to a remote site ( as opposed to internaly on a LAN )
I get the error "[Connection manager "FTP Connection Manager"] Error: An error occurred in the requested FTP operation. Detailed error description: 200 Type set to IMAGE. 200 command successful 550 permission denied . "
I can manually FTP to this site from my machine, using either a CMD window or Windows explorer. I can create folders, deposit files, delete files etc so I seem to have full control. This task works when testing on our local FTP server on the LAN. The "Test" connection works when configuring the connection to the remote site. It is just at runtime that the task fails.
Can anybody come up with any ideas why this may be ?
Thanks.
Hello.
I have a car table, whose rows contain cars and their respective weight:
Ex: (1, 1000), (2,1100), (3, 900) etx.
I also have a car class table with the classes cars can fall into, based on a lower bound and an upper bound in which the car's weight must fit.
Ex: (Class1, 0, 999), (Class2, 1000, 1499), (Class3, 1500, 1999), etc.
I need to match each car to it's respective class. I've already search the database for post on this subject, but unfortunatelly my goal is yet to be reached. Can someone help?
Thanks in advance,
Hugo Oliveira
Hi,
I have added interactive sort to report. When i perform the sort in the preview of the report, i see a message 'Report is being generated'. But when i do the sorting from Report viewer control, the screen goes blank before the sorted data comes up.
Is there any way I can display a message telling sorting is in progress?
Any help in this regard is appreciated.
Thanks.
Hi, I'm using the lookup task to perform updates on some records and it seems to be working correctly but isn't making all updates. I have a case where there are 543 rows in my source connection, there are 436 of them that do not match the date column of the 543 in my destination table. It only updated 224 of them when it should have updated all 436? Does anyone know why it would only update this many instead of all? I also had another that only updated 18 out of 19 instead of all 19.
thanks,
Hi guys,
I have created a user on the domain computer and this user has given a limited privilege. I need this user only to browse reports on the Report Manager so I gave him a browser role. However, when this user login to the report manager using his account, he is able to not only the Contents tab of the report manager but also the Properties tab where he can do admin stuff. I'm not sure where exactly I have to troubleshout this issue, either on the domain computer or Report Manager. I'm not sure if there is any set up done on the domain computer that enable a User account to act like an Admin when they login on the Report Manager.
Please this is urgent...heeeeeeeeeeeeeeeeelp!
thx!
I'm developing an asp.net app that will list the reports available on the report server. The app works OK on my local machine but when I deploy it I run into a permissions problem:
Exception Details: System.Web.Services.Protocols.SoapException: System.Web.Services.Protocols.SoapException: The permissions granted to user 'NT AUTHORITYNETWORK SERVICE' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'NT AUTHORITYNETWORK SERVICE' are insufficient for performing this operation. at Microsoft.ReportingServices.Library.ListChildrenAction.PerformActionNow() at Microsoft.ReportingServices.Library.RSSoapAction`1.Execute() at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.ListChildren(String Item, Boolean Recursive, CatalogItem[]& CatalogItems) --- End of inner exception stack trace --- at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.ListChildren(String Item, Boolean Recursive, CatalogItem[]& CatalogItems) at Microsoft.ReportingServices.WebServer.ReportingService2005.ListChildren(String Item, Boolean Recursive, CatalogItem[]& CatalogItems)
My code uses the DefaultCredentials:
ReportingService2005 rService = new ReportingService2005();rService.Credentials = System.Net.CredentialCache.DefaultCredentials;
CatalogItem[] catalogItems;
catalogItems = rService.ListChildren("/", true);
I can avoid the exception if I use the Administrator account:
System.Net.CredentialCache cache = new System.Net.CredentialCache();// Add a NetworkCredential instance to CredentialCache.// Negotiate for NTLM or Kerberos authentication.cache.Add(new Uri(ReportServer), "Negotiate", new System.Net.NetworkCredential("Administrator", "<password>", "<domain>")); //Assign CredentialCache to the Web service Client Proxy(myProxy) Credentials property.rService.Credentials = cache;
I'm pretty sure using the Administrator account here is not the best practice. Any suggestions?
Thanks,
Al