I am trying to connect to a SQL Server machine using SQL security instead of integrgated security. However, the server was setup initially to use only integrated security. When I right click on the server and select properties, I get this error:
Error 0: Cannot load the DLL xpstar.dll, or one of the DLLs it references. Reason: 5(Access is denied.).
I googled this error but could not find a single solution. The dll will not register with regsvr32. Do I need to repair SQL Server and then re-run the latest service pack, or is there a simple solution?
Hi We have a bunch of servers running server 2000 & 2003 along with many sql server (versions 2000 & 2005) databases in a production environment pulling transactions then doing warehousing & reporting.
An audit has shown up 1 production server using English_US 'mmddyyyy' system date formats, all others being English_Australian 'ddmmyyyy'.
Is it safe to simply change the regional settings on this English_US server to English_Australian or will it mess up the data in our SQL 2005 databases? I've not been able to get a definitive answer from anyone yet!
Using the Agentpress theme I have put together a client site that is fully functional, however the client has asked that the search query is altered slightly and i'm having trouble working out how to do it.Basically they want the search facility provide the following options:
1. Bedrooms searched for as 1+, 2+, 3+ and 4 or more.
2. Property availability to provide just 2 options - Available and Include Let Properties.
how to change the search settings to return this information.
I am facing one problem when I am trying to create some stored procedures, Msg 468, Level 16, State 9, Procedure SG_GET_USER_SECTOR_POSITION, Line 11 Cannot resolve the collation conflict between "Arabic_CI_AS" and "SQL_Latin1_General_CP1_CI_AS" in the equal to operation. Msg 468, Level 16, State 9, Procedure SG_GETRANKLIST, Line 4 Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Arabic_CI_AS" in the equal to operation. I need to change these collation settings, please help me how to change them.
My site works fine in VWD2008 express, but I get this error when I try to use it on my live website. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. According to this article: http://support.microsoft.com/kb/914277 I am supposed to:
1. Click Start, point to Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Surface Area Configuration. Ok, there is no such program in this folder. The only thing in there is "SQL Server Error and Usage Reporting"... The other thing I am greatly concerned with is this: All is want is for my webpages to be able to access my database for user authentication. I DO NOT want to grant the internet rights to remote connect to my database.
I get the following error and have been trying to figure out why I keep getting it. Initially, I had placed my project under wwwroot folder and ran it under IIS and it gave this error. Then I moved it to my local C drive and same thing. I am sharing this project with two other co-workers and all our config files and code files are same...they don't get this error but I do. I checked that SQL Server Client Network Utility has TCP/IP and the 'Named Pipes' enabled. I thought maybe I have setting in the Visual Studio 2005 that I'm not aware of that's causing this problem...it can't be the server since my co-workers aren't having this error and can't be anything in the code since all of us are sharing this project through vss. I dont' think using different version of .net framework can create this error. I changed the version from 2.0 to use 1.1x and it gave same error... Any help would be greatly appreciated. Thanks in advance.
Server Error in '/RBOdev' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197 System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.GetConnectionHolder() +16 System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.LoadPersonalizationBlobs(WebPartManager webPartManager, String path, String userName, Byte[]& sharedDataBlob, Byte[]& userDataBlob) +195 System.Web.UI.WebControls.WebParts.PersonalizationProvider.LoadPersonalizationState(WebPartManager webPartManager, Boolean ignoreCurrentUser) +95 System.Web.UI.WebControls.WebParts.WebPartPersonalization.Load() +105 System.Web.UI.WebControls.WebParts.WebPartManager.OnInit(EventArgs e) +497 System.Web.UI.Control.InitRecursive(Control namingContainer) +321 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +692
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
Hi I always get good reply from u all, thank you, I have copied my asp.net website from one server to another. they administrator made necessary modification on IIS manager . and able to see the website on browser. but now i can't loging to system using old password. I tryed to create new password then also it gives error System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) Here I have used asp.net login control and membership class. Do I need to make nay changes in code. I have already modified server name in connection string in web config file. any one can say what is the problem and how to solve this. thanks Pat
Hi , I am struck with one issue.Plz help me out if you have any solution for this one. Details Front End - Visual Studio 2005 Back End -SQL Server 2000 (Remote database) Error i am getting is {System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at dbcAccess.clsSQL.GetConnect() in C:Documents and SettingskerlsgMy DocumentsVisual Studio 2005ProjectsdbcAccessdbcAccessclsSQL.cs:line 296}
{System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
I am trying to enable FILESTREAM on a SQL 2012 installation that is supporting a Sharepoint 2013 implementation. When I try to enable FILESTREAM using the SQL Server Configuration Manager I receive the following error:
There was an unknown error applying the FILESTREAM settings. Check the parameters are valid. (0x80041008)
I have done this succussfully in the past in SQL2008R2/Sharepoin2010 environment but this is my first attempt with SQL2012/Sharepoint2013 and I am not sure how to proceed with troubleshooting.
We have a database in SQL Server 2008 R2 with mirroring and want that replication is done by dedicated network.We stop the endpoint and when we try to run the following command, syntax error occurred:
Msg 102, Level 15, State 1, Line 1 Incorrect syntax near '192.168.1.14'.
What is the correct syntax of the command line below?
ALTER ENDPOINT Endpoint_Mirroring AS TCP (LISTENER_IP = '192.168.1.14')
I am a newbie to .NET and MS SQL server. I am trying to connect to sql server d/b from my application files.
How should i open a connection from my system pc5 (where application/proj being developed) to SQL serevr which is installed on my server(server1). Both are in network.
I have installed sql client on my system(pc5) and created my d/b (MyDB) thru EM, now how can i create username & password for MyDB datbase.
I had installed ASP.NET Commerce server(from ASP.NEt site) on my system pc5 its working fine with accessing Commerce d/b from server1. I observed the string in web.config file of commerce application it is as follows.
In the same way can i create Username and passsword for MyDB database, if so how should i do that. that should look like some thing like this..
<add key="ConnectionString" value="server=server1;database=MyDB;uid=MyDBUser;pwd=MyDBpass;" /> to do in this way i need to create username and pw for MyDB . How should i create username ansd pw for MYDB datase.
I recently installed SQL Server on a machine running Windows Server 2003. Before it was on my desktop. When I checked the TCP/IP settings under configuration manager, I noticed it doesnt have anything for my IP address. I just have a entry for the 127.0.01 loopback address. I know when I had it installed on my desktop there was a entry for my IP address. Is this ok or did something go wrong and it didnt set the IP address? I can still login and access the databases fine from Managament Studio.
Also would it better to have the services run as a network service or a local service?
I'm about to go absolutely nuts. I've tried so many things including:
1) Of course making sure Remote connections and both TCP/IP and named pipes are enabled for SQL 2005 2) Verified my connection string works. I even tested it in Enterprise Library using the tool and it connects successfully via windows authentication 3) Made sure of course my logged in user is a member of the administrator group and that my user in SQL 2005 logins has db_owner and full rights to the DB I am connecting to. I also made sure the NT AUTHORITY as well as the 3 sql service users have db_owner rights as well as the adminstrator in the SQL Server logins all have db_owner to the DB 4) Started the SQL Server Browser service, SQL Server DB engine, and SQL Server Agent 5) Made sure my site is setup right in IIS 7. I checked the connection string in there as well as it shows up in IIS7 in one of the sections. Using Windows authentication and it is enabled for my site 6) Tried running the .net site using both localhost (IIS) and also tried using the Visual Studio built-in web server. Both give this message still
Error Details:
Server Error in '/' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +800131 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186 System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +737554 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +114 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +381 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +173 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +357 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +30 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +494 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.SessionState.SqlStateConnection..ctor(SqlPartitionInfo sqlPartitionInfo) +79
When my default.aspx page loads I get this error for the connection to my SQL 2005 DB. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) I have already gone to Surface Area Configuration to ensure that Remoting with both Named Pipes or TCP/IP is enabled and it's set to both for remoting.I verified that my local account has access to the DB.Not sure what else to check.
I need to select collation settings to support chinese characters. As i came to know that i need to select 950 character set. But problem is that i am not able to find the option for chinese characters i.e, 950 character set in the collation settings of the setup. It will be helpful if anyone could suggest me if there is any other option to set while set up or in an existing sql server instance to support chinese character data.
I have created a simple package that imports data from a flat file into a database. To run the package I'm using a SQL Server Agent Job. The location of the file is stored as a connection string in the Connection Managers tab in the SQL Server Agent Job.
Is there a way to change this connection string programmatically? If not programmatically, is there a way to change this setting right before I execute the package. I want to change the location of this file based on user input. Also, I'm executing the package using the sp_start_job stored procedure to run the job.
We have SQL Server 2005 Entp 32-bit on Windows Server 2003 Entp.Edtion 64-bit. ( Total memory = 16 Gb)
1) So, in this case , do i need to enable AWE Configuration from SQL Server Side ( 32-bit).
And what settings( AWE, /PAE) i should enable on OS (i.e.) on Windows Server 2003 (64-bit) in boot.ini file. Because right now, i dont see any switches in boot.ini file.
2) And with 16 GB of RAM, what should be the ideal setting for memory ( Min & Max).
Please help a teacher at wit's end. I have created a site using Microsoft Expression Web. The site includes a create user page on which I placed the create user control (wizard), and a login page (which houses a login control) . When the site sits on my local host all works well and I render the pages on my browser locally: the first time a user is created the aspnetdb.mdf file is automatically created into my app_data folder, the new user information is saved and can be accessed on the login page etc. However, when I upload to my hosting server. (godaddy) I can navigate to each of these pages seamlessly but when I try to use the controls on either page I get similar errors:
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) I am not a programmer, and am just beginning to learn asp.net. However, I need to solve this problem. GoDaddy cannot help me, they say, because this is inside of EW and that is a MS problem. They have on the several ocassions I have contacted them, suggested compatibility issues (since they use SQL server 2003 and 2008 not 2005, or suggest that I need to script something to ensure that the .mdf file is recognized by their server, or that it was a database problem and that I may need a database programmer. They did tell me that it is important to note that the databases are hosted outside their server. I have not found anything in the EW side of this equation since most forums and support etc, deal more with the design part, than the online publishing part. I have tried to find a programmer locally that could help me, and have yet to find one. I am so close to being able to publish a site that meets our small school's needs, but cannot jump this one hurdle. Can anyone tell me what I can do? Any help will be appreciated.
i have installed SQL RS and have a directory listing in the Reports directory via my browser. CAn anyone tell me which file / setting needs tweaking please?
Hi, I'm installing SQL Server 2005 on windows 2003 R2. Which Collation Designator is to be used so that the both English as well as Arabic characters can be stored simultaneously...? That is "The collation settings designator which support both Arabic as well as English character set"...
We have a new set up on VM to run an application running 24*7 (migrated from SQL server 2008R2) with below configs:
1. OS- Windows server 2012 Standard 64 bit hosted on Virtual Machine
2. Memory 16 GB and Cores =4 with 2.4GhZ processor
3. SQL server 2012 SP2 , 64 bit Standard edition.
4. Total size of databases as of now 15 GB with biggest being 5 GB.
How should i go around in setting the MAX and MIN server memory settings. I have this set up for many of SQL 2005 and 2008R2 servers, but for 2012 i heard that things has slightly changed.Â
How should i start analyzing and setting the right value of this MAX and MIN?
Script to Reverse Engineer / Script out your EXISTING database mail settings?
I set up a profile to use gMail, and it seems logical for me to export out the settings to a script, then run the script on my laptop, other servers, etc.
There's no built in option, so I figured i'd ping the forum before i do it myself.
There are example scripts where you fill in the blanks, examples how to set up dbmail, but i did not find anything that scripts out existing settings.
Hello,I just installed a SQL server and playing with it. I was reading up onCollation and tried rebuilding the master database after changing toLatin 1. After the master database was built, I looked at the regionalsettings and realized that it was still English. When I tried tochange the settings again using rebuild database, I saw that myselection was gone and replaced by the default setting. Iam a newbieand any help is appreciatedThanks!Sunder
I'm having trouble finding the optimum memory settings for SQL Server 2005. I have 4 instances running on a macine with 8 dual-core processors and 18GB of RAM. I have tried the following memory settings so far:
No maximum - one instance used about 12GB of RAM so then the others struggled Maximum of 4GB each (2GB left for Windows) - meant that 3 instances could be using 1GB each and then another at 4GB and needing more whilst 9GB sat unused. Minimum of 2GB each - one instance would use up 10GB and then never give any back to the other instances.
I also find that setting a maximum then just causes a high amount of paging. What I would like to do is have each instance use a minimum amount, say 1GB, and then have each instance use a maximum of 13GB (3GB for other 3 instances running at a minimum level and 2GB for Windows). This 13GB should then be released and allocated to another instance when necessary, assuming it is no longer all being used. I do not want paging to occur if an instance reaches 13GB.
How do I go about configuring SQL Server to behave like this? Is it possible?
