Error While Merging Snapshot Containing A CLR Assembly Schema At The Subscriber
Sep 26, 2007
Hi ,
I urgently need a solution for this. I have configured merge replication between a webhoster and a local machine
and it is working perfectly but when I am adding an article (table) which has a CLR assembly associated with it,
the merge replication is failing saying it cannot apply the schema of the CLR assembly at the client. I think Microsoft
supposedly says in it's documentation that merge replication supports CLR assemblies. I have recreated the snapshot
after selecting the table (article) and I have reinitialised the subscription also but it is just not working. It is the simplest
of replication with just one publisher and one subscriber.
Thanks,
Andy
View 2 Replies
ADVERTISEMENT
Jun 27, 2006
Hi all.
I get the following error when trying to run a pull subscription from the subscriber:
The schema script '' could not be propagated to the subscriber.
(Source: Merge Replication Provider (Agent); Error number: -2147201001)
---------------------------------------------------------------------------------------------------------------
The process could not connect to FTP site 'ftp://ESOFTSERVER.NO-IP.INFO' using port 21.
(Source: ESOFT (Agent); Error number: 0)
---------------------------------------------------------------------------------------------------------------
The connection with the server was reset
(Source: (OS); Error number: 12031)
---------------------------------------------------------------------------------------------------------------
I've tried everything I could to solve this problem, but I can't get it working.
Thanks for any advise.
Fabio Reynoso
View 5 Replies
View Related
Feb 22, 2008
I work with February CTP of SqlServer 2008.
I have an Assembly with several UDTs inside. Version of assembly is 1.0.*
I use CREATE ASSEMBLY statement to register this assembly, and it runs without any errors. Then I rebuild CLR solution without doing any changes in source code. In that case the only difference between new and old assemblies is version (difference in fourth part of version).
Then I try to update assembly in SqlServer. I use
ALTER ASSEMBLY <name>
FROM <path>
WITH PERMISSION_SET = UNSAFE, UNCHECKED DATA
statement for this. Statement runs with error:
Msg 6509An error occurred while gathering metadata from assembly €˜<Assembly name>€™ with HRESULT 0x1.
I found the list of condition for ALTER ASSEMBLY in MSDN:
ALTER ASSEMBLY statement cannot be used to change the following:
· The signatures of CLR functions, aggregate functions, stored procedures, and triggers in an instance of SQL Server that reference the assembly. ALTER ASSEMBLY fails when SQL Server cannot rebind .NET Framework database objects in SQL Server with the new version of the assembly.
· The signatures of methods in the assembly that are called from other assemblies.
· The list of assemblies that depend on the assembly, as referenced in the DependentList property of the assembly.
· The indexability of a method, unless there are no indexes or persisted computed columns depending on that method, either directly or indirectly.
· The FillRow method name attribute for CLR table-valued functions.
· The Accumulate and Terminate method signature for user-defined aggregates.
· System assemblies.
· Assembly ownership. Use ALTER AUTHORIZATION (Transact-SQL) instead.
Additionally, for assemblies that implement user-defined types, ALTER ASSEMBLY can be used for making only the following changes:
· Modifying public methods of the user-defined type class, as long as signatures or attributes are not changed.
· Adding new public methods.
· Modifying private methods in any way.
But I haven€™t done any changes in source code, so new version of assembly satisfies all this conditions.
What could be the reason for such behavior?
P.S. I€™ve got the same error, if I add or change any method in assembly before rebuilding.
View 9 Replies
View Related
Aug 22, 2007
Hi all
Can the Snapshot be copied from the distributor to the subscriber and then from the subscriber using the copied snapshot, create a subscription to the publisher?
Urgent help would be greatly appreciated
WARNING: Running on cold coffee!
View 3 Replies
View Related
Jul 13, 2006
Hello all,
I have a unusual problem with a snapshot publication that I am having a hard time troubleshooting. The servers in question are all SQL 05 Enterprise. Here is the scenario:
Staging Server - This server acts as the publisher of the snapshot
Production Server - This server is the subscriber of the staging snapshot
Cascade Servers - These servers receive transactional updates from the production server
The staging server applies the snapshot to production successfully. From there the production server has a transactional publication which the subscribers are the cascade servers.
This model worked for a long time where we would generate the snapshot apply it to production and the updates would be sent to the cascade servers. All of a sudden there is a problem with the transactional publication from production -> cascade. There are 7-10 tables that do not receive the updates and all data in the problematic tables is truncated. The other remaining tables in the subscription receive the updates as needed. Looking at replication monitor and all other logs shows that the transactions are being replicated, but yet the 7-10 problematic tables do not contain any data. The only solution I have found for this is to recreate the entire replication model from scratch.
Any advice on how to handle this scenario? Is my model for using a transactional publication to cascade changes to a subset of servers incorrect?
View 1 Replies
View Related
Jul 9, 2007
Hi Sql Gurus.
Please help me i'm in troublle now.
I have Two databases,that same schemas and same tables. that both servers are different location. but data must be update and input from both sites.that data must be same both.
so i've planed to replication data both servers,then i must chose merge replication right?
so i'm set
server1 (assumed server1 as main) are Distributor/Publisher
and
server2 just Subscriber only
that i can configuration successfully.
then i'm chose push replication from server1 but it's not work.
this is error message that show
The process could not deliver the snapshot to the Subscriber.
please advise me what's wrong and how to fix problem?
Thank you.
View 5 Replies
View Related
Jan 29, 2007
I am Having trouble trying to set up SQL Server Replication Utilising Web Synchronisation Where the
IIS(Web Server) is on a separate machine to the SQL Server(Publisher). I am using MSDE as the SQL Server Box, however even when I used SQLServer2000, or SQLServer2005 I have had no joy with the 2 separate Servers setup.
If I have the one server then I have no problems (i.e. One Server Setup)
Server A: Windows 2000,
with MSDE installed
enabled for Merge replication,
and has a Publication set up.
IIS Web Page Setup for Synchronisation
My SQL Server 2005 Mobile device syncs via the web page on ServerA Fine, no problems at all.
The Trouble is when I am trying to utilise SQL Server Replication as follows. (i.e. 2 Server Setup)
Basically I am using the Same ServerA as in the one Server setup I had above. All I have done is I am now using a Separate IIS Server for the Web Synchronisation ServerB
I have run the "Configure Web Synchronisation Wizard"(ConnWiz30.exe) on my web page on ServerB. And I am using Anonymous Access Authentication With Windows NT Authentication on my Web Server(ServerB),
the Anonymous User is a Domain user, and is the Same Domain User I used in the One Server setup which I had working (so this IIS Anonymous Domain user should have all permissions required on the ServerA (SQL Publisher) both Windows permissions and SQL Server Permissions.
Server A: Windows 2000,
with MSDE installed
enabled for Merge replication,
and has a Publication set up.
Server B: Windows XP, IIS Web Server(Web page enabled for Web Synchronisation)
I have a Mobile device as a subscriber, which is using Web Synchronisation on ServerB(Web Server), to sync with the ServerA (MSDE Box).
The error I am receiving is "A Call to SQL Server Reconciler has Failed" Try to resynchronise, "The Process Could Not deliver the Snapshot to the Subscriber"
A little extra info:
-I can remotely connect from my Web server(ServerB) to the SQL Box ServerA via a TCP/IP ODBC connection so remote connections does not seem to be an issue.
-If on My Mobile device if I try to Add a Subscription & Synchronise the replication using the
AddSubscription(AddOption.ExistingDatabase), it works fine. (Obviously the subscription database does exist before the synchronisation)
If I try to Add a Subscription & Synchronise the replication using the
AddSubscription(AddOption.CreateDatabase), I get the error as mentioned.
Is there something I have missed? Any help you can provide is much appreciated.
Thanks.
View 4 Replies
View Related
Aug 18, 2006
Hi,
I have a replication in which publisher, distributer and subscriber all runing on sql server 2005. all the tables that needs to be replicated are under 'dbo' schema on publisher.
Subscriber is a datawarehouse so i dont want to put tables coming from a system to go under dbo schema as there might be other application replicating same name tables to warehouse. i have created a schema for my application on warehouse but dont know how to tell replication to create tables under application schema created on subscriber. I am using snapshot replication that can be reinitialized if required.
any help will be appriciated.
Cheers,
Furrukh baig
View 1 Replies
View Related
May 16, 2007
Hi
I need to setup transactional replication for a production server.
The tables (articles) at publisher being replicated can expect schema changes.
Is there any way to reflect schema changes at subscriber using transactional replication.
Early Thanks,
Salman Shehbaz.
View 1 Replies
View Related
Aug 15, 2006
Hi,
I have the same database(3GB) in 2 physical locations in usa and europe
I need to create a publisher and subscriber between these 2 database without sending any snapshot because i have the same data in the 2 sides, is it possible ?
Thx
Jim
View 13 Replies
View Related
Apr 16, 2007
How can I keep schema changes in the subscriber's database when I replicate the snapshot from the publisher?
I just want to move data from a remote server, but it seems that the tables are being dropped which is not good as we use the subscriber as a development box.
Please advise
View 7 Replies
View Related
Apr 25, 2015
I need to setup snapshot replication for 1 large table.
Source table: SourceDatabaseName.dbo.MyTable1
Target table: TargetDatabaseName.CustomSchema.MyTable1
In the above example, how can I specify the target DB's CustomSchema name (it's currently creating dbo, not CustomSchema)
View 1 Replies
View Related
May 1, 2008
We have written a test CRL stored procedure to test replacing one of our complex stored procedures but can€™t get it deployed to our SQL server that hosts a mirrored configuration of our production database (very locked down). It works fine on our development instances (not very locked down). It only references the default assemblies that were added when we created the project. All it does is use Context Connection=true to get data, loops though some records and returns the data using SQLContext. CLR is enabled on SQL server, the assembly is strongly signed, and we tried deploy using the binary string with the SAFE setting.
CREATE ASSEMBLY for assembly 'SQLCLRTest2' failed because assembly 'SQLCLRTest2' failed verification. Check if the referenced assemblies are up-to-date and trusted (for external_access or unsafe) to execute in the database. CLR Verifier error messages if any will follow this message
[ : SQLCLRTest2.StoredProcedures::GetLift][mdToken=0x600001e] Type load failed.
[token 0x02000008] Type load failed.
View 8 Replies
View Related
Aug 10, 2006
can a sql server 2000 snapshot replication
solution handle a schema change.
as far as i know i can't drop a table involved in replication
View 4 Replies
View Related
May 31, 2007
I am trying to deploy a Database Project with Visual Studio 2005 and SQL Server 2005 Standard.
I import €œSystem.IO€? and have therefore set the permission levels to EXTERNAL_ACCESS.
I am receiving the same error message that many folks have received.
CREATE ASSEMBLY for assembly 'Images' failed because assembly 'Images' is not authorized for PERMISSION_SET = EXTERNAL_ACCESS.
The assembly is authorized when either of the following is true: the database owner (DBO) has EXTERNAL ACCESS ASSEMBLY permission and the database has the TRUSTWORTHY database property on; or the assembly is signed with a certificate or an asymmetric key that has a corresponding login with EXTERNAL ACCESS ASSEMBLY permission. If you have restored or attached this database, make sure the database owner is mapped to the correct login on this server. If not, use sp_changedbowner to fix the problem. Images.
My CLR access is €œon€?
I have tried
1) From master run: GRANT EXTERNAL ACCESS ASSEMBLY to [BuiltinAdministrators].
2) From master run: GRANT EXTERNAL ACCESS ASSEMBLY to €œMy Windows Authentication ID€?.
3) Run ALTER DATABASE MYDATABASE SET TRUSTWORTHY ON
4) In Visual Studio .NET 2005 Set the permission levels to €˜external€™
5) Tried BuiltinAdministrators and my SQL Server Windows Authenticated Login ID for the ASSEMBLY OWNER.
I can compile BUT NOT DEPLOY
Any help would be greatly appreciated.
Regards Steve
View 8 Replies
View Related
Feb 29, 2008
I am trying to get a function I created in VB 5 for Access and Excel to work in SQL 2005. I was able to update the old VB code to work in VB 2005. I compiled and made a .dll, and I was able to register the new Assembly in SQL Server. When I try to create the Function, I get an error:
CREATE FUNCTION dbo.Temperature(@FluidName char, @InpCode Char, @Units Char, @Prop1 varchar, @Prop2 varChar)
RETURNS VarChar
AS EXTERNAL NAME FluidProps.[FluidProps.FluidProperties.Fluids].Temperature
Error returned:
Msg 6573, Level 16, State 1, Procedure Temperature, Line 21
Method, property or field 'Temperature' of class 'FluidProps.FluidProperties.Fluids' in assembly 'FluidProps' is not static.
Here is the code (part of it) in the VB class:
Header:
Imports Microsoft.SqlServer.Server
Imports System.Data.SqlClient
Imports System.Runtime.InteropServices
Imports System.Security
Imports System.Security.Permissions
Namespace FluidProperties
'Option Strict Off
'Option Explicit On
Public Partial Class Fluids
Function:
Function Temperature(ByRef FluidName As Object, ByRef InpCode As Object, ByRef Units As Object, ByRef Prop1 As Object, Optional ByRef Prop2 As Object = Nothing) As Object
Call CalcProp(FluidName, InpCode, Units, Prop1, Prop2)
Temperature = ConvertUnits("-T", Units, T, 0)
End Function
If I change the Function Temperature to Static, I get an error that functions cannot be Static. Its been a long time since I created the code and am having a hard time in my older age of getting the cobwebs out to make it work.
I have no problem getting the function to work if I call it from a VB form....so what do I need to do to get it to work on data in my SQL server?
Thanks
Buck
View 20 Replies
View Related
Jan 12, 2006
I previously had an ASP.NET 1.1 site running on my IIS 6.0 server (not the default website) with Reporting Services running in a subdirectory of that website. I recently upgraded to ASP.NET 2.0 for my website and was greeted with an error when trying to view a report. The error was very non-descript, but when I checked the server logs, it recorded the details as "It is not possible to run two different versions of ASP.NET in the same IIS process. Please use the IIS Administration Tool to reconfigure your server to run the application in a separate process."
First of all, I could not figure out where and how to do this. Secondly, I decided to try to also change the Reporting Services folders to run ASP.NET 2.0 and when I did, I was greeted with the following message when attempting to view a report:
"Failed to load expression host assembly. Details: StrongName cannot have an empty string for the assembly name."
Please help.
View 7 Replies
View Related
Aug 2, 2006
Hi
I am a bit paranoid about what I just did to my SQL Server 2005 with this CLR experiment.
I created a Class Lib in C# called inLineLib that has a class Queue which represents an object with an ID field.
in another separate namespace called inLineCLRsql, I created a class called test which will hold the function to be accessed from DB, I referenced and created an instances of the Queue class, and retrieve it's ID in a function called PrintMessage.
namespace inlineCLRsql{
public static class test{
public static void PrintMessage(){
inLineLib.Queue q = new inLineLib.Queue();
int i = q.queueId ;
Microsoft.SqlServer.Server.SqlContext.Pipe.Send(i.ToString());
}
}
}
to access this from the db, I attempted to create an assembley referencing inLineCLRsql.dll. This didn't work as it complained about inLineLib assembly not existing in the db. I then attempted to create an assembley for inLineLib but it barfed saying System.Management assembly not created.
so what I did is (and this is where I need to know if I just ruined sql server or not):
1- ALTER DATABASE myDB SET TRUSTWORTHY ON;.
2- CREATE ASSEMBLY SystemManagement
FROM 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727System.Management.dll'
WITH PERMISSION_SET = UNSAFE
3- CREATE ASSEMBLY inLineLibMaster
FROM 'D:inLineServerinLineLibinDebuginLineLib.dll'
WITH PERMISSION_SET = unsafe
4- and finally
CREATE ASSEMBLY inLineLib
FROM 'D:inLineServerCLRSQLinlineCLRsqlinDebuginlineCLRsql.dll'
WITH PERMISSION_SET = SAFE
Everything works after those steps (which took some trial and error). I can create a sproc like:
CREATE PROC sp_test AS
EXTERNAL NAME inLineLib.[inlineCLRsql.test].PrintMessage
and it returns the Queue ID
Is there anything unadvisable about the steps above?
Thanks for your help
M
View 1 Replies
View Related
Apr 20, 2007
Hi,
I have setup merge replication between SQL Server 2005 and SQL Server Express. The setup uses web synchronization. (And the setup uses dynamic filter HOST_NAME)
On some of the client machines, replication fails with the following error (when initializing the subscription):
from subscriber merge agent verbose log:
A dynamic snapshot will be applied from 'D:DOCUME~1JBAUMG~1.CORLOCALS~1TempDB101-EQA-SCL_BQDB_BQ_PUB_BQDB'
Validating dynamic snapshot
2007-04-1819:39:45.434 OLE DB Subscriber 'FRG-BAUMGARTENJSQLEXPRESS': sys.sp_MSregisterdynsnapseqno @snapshot_session_token=N'\XXX.XX.XX.XXSnapshotuncDB101-EQA-SCL_BQDB_BQ_PUB20070417180079dynsnap', @dynsnapseqno='5599F67E-A1A9-4573-A14F-9851F6FE4B51'
(Note: XXX.XX.XX.XX is a proper IP of DB, I have just masked it in the post)
The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file.When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write.
I enabled verbose logging for the snapshot agent for the subscriber, but there was no error there. It is obvious from the log info above that the error occurs only after downloading the snapshot to the client and during applying it to the subscriber by the merge agent.
After I got this error, I tried running the subscriber program again and it successfully replicated on the third attempt. But this behavior is not consistent and it fails for most of the time on some of the machines
Any info on this error?
View 6 Replies
View Related
Apr 12, 2007
I am trying to create an assembly on a sql server 2005 machine but it gives me following error:
Msg 33009, Level 16, State 2, Line 2
The database owner SID recorded in the master database differs from the database owner SID recorded in database 'XYZ'. You should correct this situation by resetting the owner of database 'XYZ' using the ALTER AUTHORIZATION statement.
I tried using the alter authorization statement to change the owner.
It did not work.
I am able to create same assembly on another test database but can not create it on this database.
Is this because of orphan logins?
Thanks for the help.
Harshal.
View 4 Replies
View Related
Dec 27, 2006
Hi,
I ran the following in the management studio:
CREATE ASSEMBLY MyCLRAssembly from 'c: empMyCLRAssembly.dll'
WITH PERMISSION_SET = SAFE
Go
For some reason I get the following error:
Msg 6517, Level 16, State 1, Line 1
Failed to create AppDomain 'AdventureWorks.dbo[ddl].22'.
I tried to google this error, but couldn't find it...
I would appreciate it if someone can tell me what I'm doing wrong.
Ohad.
View 3 Replies
View Related
Apr 12, 2007
I am trying to create an assembly on a sql server 2005 machine but it gives me following error:
Msg 33009, Level 16, State 2, Line 2
The database owner SID recorded in the master database differs from the database owner SID recorded in database 'XYZ'. You should correct this situation by resetting the owner of database 'XYZ' using the ALTER AUTHORIZATION statement.
I tried using the alter authorization statement to change the owner.
It did not work.
The same assembly is created on another test database but can not create it on this database.
Is this because of orphan logins?
Thanks for the help.
Harshal.
View 6 Replies
View Related
Jun 20, 2007
Hello, I have an assembly used in a report (.rdl). The assembly enables to connect to Database via ODBC. Also, it had been signed (.snk) using the VS designer. In development platform, the following error was outputted when RUN the report (** PREVIEW is no error ** )
Error:
============================================================
'RSReportHost.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_32mscorlib2.0.0.0__b77a5c561934e089mscorlib.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesRSReportHost.exe', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded
'C:WINDOWSassemblyGAC_MSILSystem.Windows.Forms2.0.0.0__b77a5c561934e089System.Windows.Forms.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RSReportHost.exe' (Managed): Loaded
'C:WINDOWSassemblyGAC_MSILSystem2.0.0.0__b77a5c561934e089System.dll', Skipped loading symbols. Module is optimized and the debugger option
'Just My Code' is enabled.
'RSReportHost.exe' (Managed): Loaded
'C:WINDOWSassemblyGAC_MSILSystem.Drawing2.0.0.0__b03f5f7f11d50a3aSystem.Drawing.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesReportingServicesLibrary.dll', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.Diagnostics.dll', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded
'C:WINDOWSassemblyGAC_MSILSystem.Configuration2.0.0.0__b03f5f7f11d50a3aSystem.Configuration.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RSReportHost.exe' (Managed): Loaded
'C:WINDOWSassemblyGAC_MSILSystem.Xml2.0.0.0__b77a5c561934e089System.Xml.dll', Skipped loading symbols. Module is optimized and the debugger option
'Just My Code' is enabled.
'RSReportHost.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_32System.Web2.0.0.0__b03f5f7f11d50a3aSystem.Web.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.Interfaces.dll', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesReportingServicesNativeClient.dll', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded
'C:WINDOWSWinSxSx86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.762_x-ww_6b128700msvcm80.dll', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.Designer.dll', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.ReportPreview.dll', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.ProcessingCore.dll', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded
'C:WINDOWSassemblyGAC_MSILSystem.Web.Services2.0.0.0__b03f5f7f11d50a3aSystem.Web.Services.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RSReportHost.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_32System.Data2.0.0.0__b77a5c561934e089System.Data.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.ProcessingObjectModel.dll', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.XmlRendering.dll', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.CsvRendering.dll', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.ImageRendering.dll', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.HtmlRendering.dll', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.ExcelRendering.dll', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesConnDB.dll', Symbols loaded.
'RSReportHost.exe' (Managed): Loaded
'expression_host_58bcf01c1a8442c3bbe45e4c4847f210', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_32System.Transactions2.0.0.0__b77a5c561934e089System.Transactions.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
Connection Failure.
Request for the permission of type 'System.Data.Odbc.OdbcPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
A first chance exception of type 'System.Security.SecurityException' occurred in System.Data.dll
A first chance exception of type 'System.NullReferenceException' occurred in ConnDB.dll
A first chance exception of type 'System.Security.SecurityException' occurred in System.Data.dll
Error: Failed to retrieve the required data from the DataBase.
Object reference not set to an instance of an object.
Connection Failure.
Request for the permission of type 'System.Data.Odbc.OdbcPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
The thread 0x12c8 has exited with code 0 (0x0).
The program '[3388] RSReportHost.exe: Managed' has exited with code 0 (0x0).
============================================================
Any idea for me? thanks a lot!
View 3 Replies
View Related
Nov 1, 2007
Hello there,
i have the following problem.
I need to get some .dll's into MS SQL-Server 2005, that i need to get a own made .dll installed.
When i try to:
Code Block
CREATE ASSEMBLY SystemWeb
FROM 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727System.Web.dll'
WITH PERMISSION_SET = UNSAFE;
i get the following message:
Code Block
Warning: The Microsoft .Net frameworks assembly 'system.web, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=x86.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The Microsoft .Net frameworks assembly 'system.enterpriseservices, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=x86.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The Microsoft .Net frameworks assembly 'system.runtime.remoting, version=2.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The Microsoft .Net frameworks assembly 'system.design, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Msg 701, Level 17, State 13, Line 1
There is insufficient system memory to run this query.
When i try to create one of the another assemblies ( system.enterpriseservices, system.runtime.remoting, system.design ) i get the same message.
I looked for this Error and found only this BUG-report:
BUG#: 58267 (SQLBUG_70)
Article ID: 274030
http://support.microsoft.com/kb/274030/en-us
But this does not solve my problem.
As far as i know we use MS SQL-Server 2005 without any Service-Packs.
Question:
is there any Table/View to find out the Versionnumber/Service-Pack
In the moment i am waiting for our admin to install SP2 for SQL-Server,
hoping that this will fix the problem.
Greetings
View 10 Replies
View Related
Aug 1, 2007
I am using this code to create dll : Execute.cs
using System;
using Microsoft.SqlServer.Dts.Runtime;
public class Execute
{
public static void Package(string dtsxPath)
{
try
{
Package pkg;
Application app;
DTSExecResult pkgResults;
app = new Application();
pkg = app.LoadPackage(dtsxPath, null);
pkgResults = pkg.Execute();
}
catch (System.Exception ex)
{
throw ex;
}
}
}
Then this
c:Program FilesMicrosoft Visual Studio 8VC>csc /target:library C:SSISSSISE
xecute.cs /reference:C:SSISSSISMicrosoft.SqlServer.ManagedDTS.dll
It creates Execute.dll
but when I run this is sql server
CREATE ASSEMBLY ssid from 'c:Program FilesMicrosoft Visual Studio 8VCExecute.dll'
WITH PERMISSION_SET = UNSAFE
I am getting Error
Warning: The SQL Server client assembly 'microsoft.sqlserver.manageddts, version=9.0.242.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The SQL Server client assembly 'microsoft.sqlserver.dtsruntimewrap, version=9.0.242.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Msg 10301, Level 16, State 1, Line 1
Assembly 'Execute' references assembly 'system.windows.forms, version=2.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089.', which is not present in the current database. SQL Server attempted to locate and automatically load the referenced assembly from the same location where referring assembly came from, but that operation has failed (reason: 2(The system cannot find the file specified.)). Please load the referenced assembly into the current database and retry your request.
I don't see any place I am using System.window.forms
Any idea why? Thanks - Ashok
---------------------------------------------------------
I changed my location to to CSC
C:WINNTMicrosoft.NETFrameworkv2.0.50727>
Now I get this error
Warning: The SQL Server client assembly 'microsoft.sqlserver.manageddts, version=9.0.242.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The SQL Server client assembly 'microsoft.sqlserver.dtsruntimewrap, version=9.0.242.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The Microsoft .Net frameworks assembly 'system.windows.forms, version=2.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The Microsoft .Net frameworks assembly 'system.drawing, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The Microsoft .Net frameworks assembly 'accessibility, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The Microsoft .Net frameworks assembly 'system.runtime.serialization.formatters.soap, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Msg 10301, Level 16, State 1, Line 1
Assembly 'Execute1' references assembly 'microsoft.sqlserver.msxml6_interop, version=6.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91.', which is not present in the current database. SQL Server attempted to locate and automatically load the referenced assembly from the same location where referring assembly came from, but that operation has failed (reason: 2(The system cannot find the file specified.)). Please load the referenced assembly into the current database and retry your request.
---------------------------------------------
I managed to found this DLL Microsoft.SQLServer.msxml6_interop.dll so I copied to same location
Now It's looking for
microsoft.sqlserver.sqltdiagm - Which I am not able to find any place .......................
View 6 Replies
View Related
Mar 12, 2008
I encountered something strange, deploying the following assemblies
CREATE ASSEMBLY [Sentry]
AUTHORIZATION [dbo]
FROM 'c:clrSentry.dll'
WITH PERMISSION_SET = EXTERNAL_ACCESS;
GO
CREATE ASSEMBLY [Sentry.XmlSerializers]
AUTHORIZATION [dbo]
FROM 'C:clrSentry.XmlSerializers.dll'
WITH PERMISSION_SET = SAFE;
GO
Sentry.XmlSerializers errored out with:
Msg 6218, Level 16, State 2, Line 2
CREATE ASSEMBLY for assembly 'Sentry.XmlSerializers' failed because assembly 'Sentry.XmlSerializers' failed verification. Check if the referenced assemblies are up-to-date and trusted (for external_access or unsafe) to execute in the database. CLR Verifier error messages if any will follow this message
[ : Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializerContract::CanSerialize][mdToken=0x600006e][offset 0x00000001][token 0x01000019]System.TypeLoadException: Could not load type 'Sentry.SentryDataService.SentryDataService' from assembly 'Sentry, Version=1.0.2764.18017, Culture=neutral, PublicKeyToken=null'. Type load failed.
The interesting thing is that when I deploy this locally on my machine, there are no problems whatsoever. Using sp_configure the servers appear to be set up the same way. The database also has trustworthy set on for both.
Anything, I could be missing? Thanks
View 8 Replies
View Related
Jan 7, 2008
When I add a custom assembly
I am trying to pass certain fields in dataset I am getting the following error
invalid fields i.e. that is fields that I passed are invalid.
It also says multi path identifier for microsft.reportingservices.reportobjectmodel.fieldimpl cud not be found.
Thanks
Sai
View 1 Replies
View Related
Feb 12, 2015
I am getting "Row not found on subscriber" error on the subscriber. I am trying to find the root cause.
1. Records get lost during publication initialization from backup, could not reproduce it though. I was inserting records in a loop into a replicated table while initializing the publication from backup. After the backup/restore finished, I have stopped the insert, allowed the replication to catch up and compared the row count, it was identical.
2. Someone or some process is deleting the records on the subscriber. Setup Audit, but could not confirm this theory so far.
3. Records get deleted twice, as we publish the execution of some bulk delete archive jobs, to fix latency issues. Found this article, which says, this is not the case:
[URL]
4. Records are deleted on the subscriber by triggers. The impacted database has no triggers.
I am running SQL Server 2008 R2.
What else could be the cause of this problem?
View 0 Replies
View Related
Mar 9, 2006
Hi
Using merge replication - the stored procs are published articles.
When trying to change the article at the subscriber (sql express) I get the following errors:
Msg 21531, Level 16, State 1, Procedure sp_MSmerge_alterschemaonly, Line 45
The DDL statement cannot be performed at the Subscriber or Republisher.
Msg 21530, Level 16, State 1, Procedure sp_MSmerge_ddldispatcher, Line 181
The DDL operation failed inside merge DDL replication manipulation.
Msg 3609, Level 16, State 2, Procedure usp_Anniversary_upd, Line 21
The transaction ended in the trigger. The batch has been aborted.
Does this mean it can only be changed at the publisher ?
Bruce
View 5 Replies
View Related
May 16, 2006
Help.
When I try to CREATE/Register a third party assembly (dtsearchNetApi2) within SQL server I am getting an error (see below). I have the source code for dtsearchNetApi2 but it is in C++ and I would like to avoid having to extend/modify it if that is avoidable. I have written a 'wrapper' class in C# but sine it references dtsearchNetApi2.dll I can't register that dll either.
CREATE ASSEMBLY DBSEARCHNETAPI
FROM 'C:TempdtsearchNetApi2.dll'
WITH PERMISSION_SET = UNSAFE
Msg 6218, Level 16, State 3, Line 2
CREATE ASSEMBLY for assembly 'dtSearchNetApi2' failed because assembly 'dtSearchNetApi2' failed verification. Check if the referenced assemblies are up-to-date and trusted (for external_access or unsafe) to execute in the database. CLR Verifier error messages if any will follow this message
dtsearchNetApi2 has references to unmanaged code. The dtSearchNetApi2.dll is a .NET 2.0 wrapper around C++ objects exported in dten600.dll. It is implemented in MSVC++ with Managed Extensions is implemented in C++/CLI 2.0.
View 3 Replies
View Related
