Error While Registering A New Sql Server
Mar 22, 2006
TITLE: New Server Registration
------------------------------
Testing the registered server failed. Verify the server name, login credentials, and database, and then click Test again.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
When I try to regiter a sql server, I take this error message. I am using Sql Server 2005. What is the problem,can you help me?
View 4 Replies
ADVERTISEMENT
Nov 13, 2007
Good evening everyone,
I'm following the steps of the tutorial on how to construct a managed data mining plugin in C#.
Once created the Metadata, Algorithm and Navigator classes I tried to register it on Analisys Service by running the XMLA template written on the tutorial but I got the following error:
Unable to retrieve a list of supported data mining algorithms. Make
sure you are connected to the correct Analysis Services server
instance and the Analysis Services server named localhost is running
and configured properly. You can continue with a default list of data
mining algorithms
The GUID in the XMLA is correct as so the service name. The SQL Server engine runs fine.
I noticed that when I run this XMLA, the file msmdsrv.ini is modified, so in DataMining/Algorithms session a new entry is correctly created, enabled and the GUID is also set correct.
I also tried to ignore the XMLA setting up msmdsrv.ini manually but it also didn't work.
The build process is fine, both DMPluginWrapper and the Shell are registered by gacutil and I restarted (also try to stop and start) the server.
Any ideas will be very appreciated.
Thanks,
-Renan
View 17 Replies
View Related
May 16, 2006
Help.
When I try to CREATE/Register a third party assembly (dtsearchNetApi2) within SQL server I am getting an error (see below). I have the source code for dtsearchNetApi2 but it is in C++ and I would like to avoid having to extend/modify it if that is avoidable. I have written a 'wrapper' class in C# but sine it references dtsearchNetApi2.dll I can't register that dll either.
CREATE ASSEMBLY DBSEARCHNETAPI
FROM 'C:TempdtsearchNetApi2.dll'
WITH PERMISSION_SET = UNSAFE
Msg 6218, Level 16, State 3, Line 2
CREATE ASSEMBLY for assembly 'dtSearchNetApi2' failed because assembly 'dtSearchNetApi2' failed verification. Check if the referenced assemblies are up-to-date and trusted (for external_access or unsafe) to execute in the database. CLR Verifier error messages if any will follow this message
dtsearchNetApi2 has references to unmanaged code. The dtSearchNetApi2.dll is a .NET 2.0 wrapper around C++ objects exported in dten600.dll. It is implemented in MSVC++ with Managed Extensions is implemented in C++/CLI 2.0.
View 3 Replies
View Related
Aug 1, 2007
hi, Derek Comingore
My self Jitendra Nayi....
I am trying to generate a SQL CLR stored procedure and i have done it too. Now the next step is to convert that *.dll file in to assembly. I am getting erro that. My server Database is on the LAN, not on my PC.
Here is the code which i have tried to register an assembly...
/*
CREATE ASSEMBLY MyAssembly FROM 'C:Documents and SettingsAdministrator.ORC80My DocumentsVisual Studio 2005ProjectsMyDB1MyDB1inDebugMyDB1.dll'
WITH PERMISSION_SET=SAFE
GO
*/
and here is the error that i am getting...
/*
Msg 6585, Level 16, State 1, Line 1
Could not impersonate the client during assembly file operation.
*/
Please help me .I am stuck at here.
View 2 Replies
View Related
Jan 23, 2008
hello,everyone,I also met a problem.
I stoped the SQL Server Analysis Services first, and registered the GAC successfully,
then modified the msmdsrv.ini manually.In fact,I found the format of my msmdsrv.ini is diffirent from the one mentioned in the tutorial,it just like below:
<DataMining>
...
<Algorithms>
.
.
.
<MyCompany_Managed_Plugin_Algorithm>
<Enabled>1</Enabled>
</MyCompany_Managed_Plugin_Algorithm>
.
</Algorithms>
<Services>
...
<MyCompany_Managed_Plugin_Algorithm>
<ProgID>44503EAB-570E-4b25-A9F4-043949A7D78E</ProgID>
</MyCompany_Managed_Plugin_Algorithm>
...
</Services>
when i restarted the the AS,
some error information displayed in event viewer,
" can't load MyCompany_Mamaged_Plugin_Algorithm data mining Algorithm provider(ProgID,
can't create Algorithm Provider program for MyCompany_Managed_Plugin_Algorithm,
ProgID does not exist in the server configuration file"
I am confused by it and have not any idea to solve it.
some one can give tips?
thanks.
View 3 Replies
View Related
May 8, 2001
Does anyone know what SQL Server uses to identify other servers which contain SQL Server, when you attempt to register a new server through enterprise mgr? For instance when you go through the new sql server registration wizard, the second screen allows you to choose what server you would like to register, and it shows you the available servers on the lan that contain sql server 6.5 or 7.0. What is enterprise mgr using to locate the other servers containing SQL Server? Thanks in advance.
View 2 Replies
View Related
Dec 15, 2000
I just created a new db on a programmer's machine. Now I cannot register his sql server on my sql server. It doesn't like 'sa'. I can connect as 'administrator' but then I cannot do anything. Seems like the logins are messed up. I am not able to execute any stored procedures as administrator.
Any ideas besides reloading sql?
Thanks.
View 1 Replies
View Related
Mar 8, 2001
Hi,
I have recently installed SQL Server 2000, And trying to register a remote SQL 7 server, through enterprise manager which fails with the following error message: Timeout expired
I am able to connect to the same server using Query Analyzer.
I was able to register this server from the same machine, prior to the installation of SQL 2000. Also, I am still able to connect to other SQL 7 servers, with SQL 2000 enterprise manager.
Any Ideas?
View 2 Replies
View Related
Sep 30, 2002
Over the weekend we changed ISPs on our SQL Server 2000 machine. The only configuration change was the IP address. I'm able to register the server from client machines using EM which are on the same network, but I can't register it from home. I've verified the IP address, username/password etc and the connection just fails with the message 'Sql Server does not exist or access is denied.' Could this be a port issue? Any ideas? Thanks.
View 4 Replies
View Related
Aug 25, 1998
is it possible to register an SQL server any other way than SQL Enterprise Manager?
If so, how?
Preeti.
View 1 Replies
View Related
May 8, 2004
Hi,
How to register a Remote SQL SERVER from a node in Local Area Network?
View 1 Replies
View Related
Dec 12, 2005
Please pardon my ignorance, but I am using MS SQL2000...On system start upthe Server Service Manager defaults to server "BACK" which is not evenregistered in the SQL Enterprise Manager. Enterprise Manager shows only oneserver " OFFICE" which is the one I want to default to. How do I remove the"Back" server completly from the system?thank you
View 3 Replies
View Related
Jun 24, 2005
Ok, well I just installed Visual Studio.NET 2003 on my PC, and to
prepare for next years courses I thought I might get going on some of
the exercises. But I am rather new to this and when I try to expand
"SQL Server" in the "Server Explorer Window" I get this message.
Could not automaticly discover any SQL Server instances.
Choose Register SQL Server instance from the shortcut menu if you know there are SQL Server instances on this machine.
From there all I know is that I can right click on "SQL Server" and
chose register new instance, but I do not know what to enter, and it
suggrests leaving it balck but that doesn't work. I will get an
instance but when I try to expand it another error pops up.
So as you can see I have no idea what I am doing when it comes to SQL Server, can any one help me with this?
Thanks again,
MCCCStudent
View 5 Replies
View Related
Nov 23, 1998
hi, I have just installed Ms sql 6.5 and tried to register the server, I typed a name and did not get any response. This installation was on a single pc which is not connected to the network... any idea of why the server is not responding. Do I need to give a name to the pc before I installed the sql server and then use register the server...
thank for your help
Ali
View 5 Replies
View Related
Dec 27, 2004
Hi all,
I have installed SQL Server 2k personal ed on Win xp and now I want to add another instance other than that one I added when installation.But I do not know how? I used EM and its wizard but it says could not find server or access is denied...
-any quick help is appreciated
View 1 Replies
View Related
May 1, 2007
Hello
I am trying to register a SQL Server 2000 on a client machine. It was workig fine , until yestarday when he moved and got a different system IP. But one of the SQL Server 'A' is getting connected. But when I try to register the server 'B' its giving an error " SQL Server does not exist or access denied". I am giving correct login credintels. When I tried to ping ( using cmd) the Server 'B' , the system was able to connect.
What might be the problem.
Thanks for the help.
View 3 Replies
View Related
Oct 13, 2005
Hi all,We have standardized on Hyperion as our reporting tool. So far I haveonly set up a couple of Access databases as data sources for it. Nowthere is a request to report off our eOn (telephony management) SQLServer database using Hyperion. The eOn SQL Server box is in aworkgroup that is not part of the rest of our domain. (We only haveone domain because we don't have a "forest", whatever that means.) Itis behind a router owned by eOn along with a PBX and some other stuff.Setting up a data source for Hyperion requires creating a special datasource file called an .oce on the box where the Hyperion fat client(required for most administrative tasks) resides, and also setting up adifferent special data source file called a .das on the server wherethe Hyperion services run. (The analysts and end-users do not have thefat client, their access is web-based.)I have to register the eOn SQL Server by using the IP address and SQLServer authentication. (I was told that I can't use Windowsauthentication because it is not in the domain.) From the box onwhich the Hyperion fat client resides, I cannot register the eOn SQLServer. The error message is "timeout expired". Tracerting indicatesthere are no intermediate hops when attempting to connect from thisVLAN. From my desktop, which is on a different VLAN, I can connect toand register it. This trip includes one hop at our 6509. From one ofmy servers which is on the same VLAN as the fat-client box, I am ableto connect and register. On the fat-client box I tried deleting andre-registering another SQL Server and there was no problem.The IP address I have to use to connect to the eOn SQL Server is *NOT*the actual IP address of the box it resides on, but rather the eOnrouter, which translates it to the address of the server. We have nocontrol over this, eOn creates this setup. I'm not sure how it knowswhich of the devices behind it a given message is for.Ideas?
View 3 Replies
View Related
Dec 4, 2007
I was on the SQL Server Express Edition site (http://www.microsoft.com/sql/editions/express/default.mspx), and I used a link that suggested by registering my SQL Server Express I could get some royalty free images and an e-book. I followed the process, and they immediately sent me an email full of links, some of which do not seem to work. The link for the Registration Benefits Portal takes me to a "Page Not Found" error on Microsoft. The article within Resources called "Using SQL Server 2005 Reporting Services with SQL Server Express" also doesn't work.
I guess I didn't really need these "benefits", but it was kind of aggravating. This is 10 minutes I won't ever get back.
Since the email said to report any problems to the forums, this is what I am doing.
View 5 Replies
View Related
Nov 26, 2007
I have set up SQL Server Express with a Server Name / Instance name RMUKOCSQLEXPRESS
However, from another Server running the full SQL Server 2005 Management Studio I cannot seem to register the above Server. The usual message of :
"An error has occurred while establising a connection to the server...."
I have allowed remote connections, set up default, named pipes etc on the SQL Server Express. Yet from the SQL Server Express Management Studio I can register full 2005 Server / Instances but not the other way round.
Is there anything else I need to be aware of or check for.
Thanks in advance
View 3 Replies
View Related
Jun 12, 2001
I am running SQL 7 (SP3) on a 2000 Server. When I configure the server as part of the Workgroup I have no problems connecting from the workstation. However, if I join the server to our 2000 domain, I cannot connect and/or register the server from the workstation through EM.
Is this a security issue? If so, what are the minimum requirements or what else am I missing. Any suggestions would be appreciated.
Thank you,
Eugene Jenkins
View 2 Replies
View Related
Feb 7, 2001
We are running 3 versions of SQL - 6.5, 7.0, and now 2000.
I have all three versions installed on my PC and run Enterprise
Manager to manage the 2000 and 7.0 servers. The one 7.0 server
is registered fine. When I try to register the other 7.0 server
I get the following message -
(SQL DMO) SQL Server xxxx must be upgraded to
version 7.0 or later.
This same server is registered through Enterprise Manager on
another PC running the 3 versions of SQL and both SQL 7.0 servers
work fine on that Enterprise Manager installation.
Any suggestions as to what I need to do to be able to register
the 7.0 server on the Enterprise Manager running on my PC?
View 3 Replies
View Related
May 10, 1999
Hi all,
Does anyone know if it is possible to register SQL Server 7.0 in SQL Server 6.5 and vice versa?
I can't find the SQLOLE70.SQL file in SQL Server 7.0 installation disk.
Thanks in advance
View 1 Replies
View Related
Jan 26, 1999
I'm trying to register a remote OLAP server under OLAP Manager.
After I enter the machine name I get the following:
Errors occurred while connecting to <server>.
Cannot open the following registry key on the server computer (<server>):
SoftwareMicrosoftOLAP ServerServer Connection Info
Do you still want to register this server?
The noticeable thing about this error message is that the registry key is missing the first level (HKEY_....). Has anyone been able to register a remote server? I can run OLAP Manager on the server without a problem. I just uninstalled and reinstalled OLAP services on the server and my desktop.
There is a registry key with this path under HKEY_LOCAL_MACHINE on the server.
View 2 Replies
View Related
Jan 7, 1999
Hi everyone,
my SQL is running TCPIP and everytime I register the server from a client, I have to enter in the IP address. Can I use a hostname to map an IP address to a server name and then enter the server name to register the server?
Thanks..Binh
View 2 Replies
View Related
Mar 10, 2008
Dear All,
My office computer just had Vista installed on it and while going back through to re-install my software, I have encountered a problem in SQL Server 8.0. (Yes, I know it's old and likely has comparability issues with Vista, but I don't have the option to upgrade at this point.) I have two servers to register. One works fine, but the other won't register and returns the error "SQL Server does not exist or access denied. ConnectionOpen (Connect())". I am able to register these on machines running XP and Windows Server 2003, but not on my Vista machine. Does anyone have any suggestions on how to fix this problem?
Thank you!
View 3 Replies
View Related
Mar 11, 2008
Dear All,
My office computer just had Vista installed on it and I have now encountered a problem in SQL Server 2000 sp4. (Yes, I know it's old and has comparability issues with Vista, but I don't have the option to upgrade at this point.) I have two servers to register. One works fine, but the other won't register and returns the error "SQL Server does not exist or access denied. ConnectionOpen (Connect())". I was able to register this one server that isn't working while previously running XP on my office computer and even as a test on another server running Windows Server 2003. This leads me to believe the problem is isolated with my installation on Vista and not with any permissions, etc. I have been scouring different forums looking for a fix for this, but have come up empty handed. Does anyone have any suggestions on how to fix this problem?
Thank you!
View 14 Replies
View Related
Jul 23, 2005
helloi am new to sql server and .net programing here is a problem i gotwhile trying to register sql server over internet on sql serverenterprise manager , i open register sql server wizardclick next, gave ip address of the sql server( i want to register) inavailable servers and add it , gave sql authenticationbut got the error"sql server does not exist or access denied coonectionopen(connect())"please advice me how to solve this problemnote: tcp/ip network library is enabled on my server and the client aswelli have also tried this in vb.netDim conect As New SqlConnection("data source =202.154.228.184;net='dbmssocn';database = pmec ; user id = sa;password = sa ")but the same exception is thrownkindly help me solve this problem, i need to solve it badlythanks
View 3 Replies
View Related
May 22, 2008
When Trying to register a SQL Server using Windows Authentication, I get the following error:
Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.
When I edit the properties and make it SQL Authentication, it works fine. The SQL Server Service is starting up with a domain user account. If that makes any difference. Funny thing is, that my co-worker, can register the SQL Server in his Enterprise Manager using Windows Authentication. We are both Domain Admins and members of the servers local admin group. So, I'm not sure what to do now.
I checked under Security, Logins...and neither of us are listed under there.
Thanks
View 6 Replies
View Related
Nov 15, 1999
Hi
I amtrying to register remote database server with my local machine Enterprise Manager. It says server doesnot exist or not available.
I am putting server name,Tcp/Ip, i.p,port in Sql client configuration utility
and then trying to register it with Enterprise Manager.
Pl help me out.
Thanks
Shaurav
View 1 Replies
View Related
May 1, 2008
We have written a test CRL stored procedure to test replacing one of our complex stored procedures but can€™t get it deployed to our SQL server that hosts a mirrored configuration of our production database (very locked down). It works fine on our development instances (not very locked down). It only references the default assemblies that were added when we created the project. All it does is use Context Connection=true to get data, loops though some records and returns the data using SQLContext. CLR is enabled on SQL server, the assembly is strongly signed, and we tried deploy using the binary string with the SAFE setting.
CREATE ASSEMBLY for assembly 'SQLCLRTest2' failed because assembly 'SQLCLRTest2' failed verification. Check if the referenced assemblies are up-to-date and trusted (for external_access or unsafe) to execute in the database. CLR Verifier error messages if any will follow this message
[ : SQLCLRTest2.StoredProcedures::GetLift][mdToken=0x600001e] Type load failed.
[token 0x02000008] Type load failed.
View 8 Replies
View Related
Nov 2, 2003
Hi,
I have installed SQL SERVER 2000 on my harddrive. And iam trying to registor my computer as a registor but its keep giving me that "Connection failed and not able to connect to the server" ( I dont know the exact message ).
Does anybody knows how to solve it. Iam using Windows XP Professional.
View 1 Replies
View Related
Mar 2, 2000
Can anyone give me advice on how to register 6.5 servers using SQL 7.0. Every time I try and register a 6.5 servers it fails. I get an error stating that "I must upgraded the 6.5 server or later to be administered by this version of SQL-DMO". I can't upgrade the server to 7.0 because the COTS product that we are using as the front end relies on 6.5. Is there any way to do this? Or do I have to install 6.5 on my workstation as a separate application than 7.0? Someone please help?
View 2 Replies
View Related
Oct 14, 1999
When using MSDE or SQL7 as the back-end to Access2000 projects (adp),
the examples often have an .mdf file to match such as say NorthwindCS.mdf
The instructions are:
1. set this file aside,
2. create a database with this name then
3. stop SQLServer,
4. copy own file to msql7data...
5 use it....
although this soemtimes works, i mostly get a "suspect" database
I was hoping to fix this with DBCC REPAIR, but support for this command seems
to have disappeared
Help
View 1 Replies
View Related
