I have recieved the following error message while running a query on SQL2k5 on a Windows 2003 64-bit EE server
"The operating system returned error 1450(error not found) to SQL Server during a write at offset 0x00001c32062000 "
I will be grateful if anyone can point me in the right direction on what this can be.
Thanks
Hi,
SQL Server 7
When i ran a query in query analyzer i am getting the below error.
once i closed and opened the query analyzer and ran the same query it worked fine.
pls the error which i got in first time.
Microsoft][ODBC SQL Server Driver]Unknown token received from SQL Server
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
[Microsoft][ODBC SQL Server Driver]TDS buffer length too large
[Microsoft][ODBC SQL Server Driver]TDS buffer length too large
[Microsoft][ODBC SQL Server Driver]TDS buffer length too large
[Microsoft][ODBC SQL Server Driver]TDS buffer length too large
[Microsoft][ODBC SQL Server Driver]Unknown token received from SQL Server
[Microsoft][ODBC SQL Server Driver]Unknown token received from SQL Server
[Microsoft][ODBC SQL Server Driver]Unknown token received from SQL Server
[Microsoft][ODBC SQL Server Driver]Unknown token received from SQL Server
[Microsoft][ODBC SQL Server Driver]Unknown token received from SQL Server
[Microsoft][ODBC SQL Server Driver]TDS buffer length too large
[Microsoft][ODBC SQL Server Driver]TDS buffer length too large
[Microsoft][ODBC SQL Server Driver]TDS buffer length too large
Pls help me in this
TIA
Adil
I am trying to run DTS package from query analyzer and getting following error .
Command from query analyzer is
go
master..xp_cmdshell 'dtsrun /Sirhahadb01 /Usa /P<sa password> /Ntestpack'
Output error message is
output
DTSRun: Loading...
DTSRun: Executing...
DTSRun OnStart: DTSStep_DTSDataPumpTask_1
DTSRun OnError: DTSStep_DTSDataPumpTask_1, Error = -2147217887 (80040E21)
Error string: Errors occurred
Error source: Microsoft OLE DB Provider for SQL Server
Help file:
Help context: 0
Error Detail Records:
Error: -2147217887 (80040E21); Provider Error: 0 (0)
Error string: Errors occurred
Error source: Microsoft OLE DB Provider for SQL Server
Help file:
Help context: 0
DTSRun OnFinish: DTSStep_DTSDataPumpTask_1
DTSRun: Package execution complete.
Sujit
While running query below on SQL Server 2005 (Build 3790: Service Pack 2):
SELECT DISTINCT pkg.PrimaryBarcode
FROM dbo.Package AS pkg (NOLOCK)
JOIN dbo.PackageCycle AS pc (NOLOCK)
ON pkg.PackageKey = pc.PackageKey
WHERE (pkg.BillCycleDateKey >= 20061201) OR
(pkg.BillStatusKey = 1)
I received a partial result set followed by
An error occurred while executing batch. Error message is: Couldn't replace text
I suspect this is a memory issue, but cannot find any reference to this particular msg on the Microsoft forums or the other 3rd party forums. PrimaryBarcode is a varchar(50)
I am not sure where to go from here. I would appreciate any ideas. Thanks in advance.
Cheers,
Mike Byrd
Hello
TestMachine1 runs SQL2005 SP2 and has as linked server myRemoteServer (SQL2000) server. I run an stored procedure in TestMachine1 which inserts about 20,000 rows to a table in myRemoteServer and brings back a similar quantity of rows. This stored procedures take about 1.5min to complete, but no error appears.
When running the same stored procedure in TestMachine2 (also SQL2005SP2), the following error appears after about 1 minute of execution (not the exact text):
SQLNCli. TCP Provider: network name is no longer available - communication link failure.
Please note that this stored procedure worked before on TestMachine2 (but with less than 10,000 rows) and that connectivity is proven among TestMachine1 and myRemoteServer, since I can execute "select * from synonym_MyRemoteTable" with no problems at all in the TestMachine2's Management Studio.
TestMachine1 and TestMachine2 have Windows XP Professional SP2; myRemoteServer has Windows 2003 and SQL Server 2000 SP4.
Can you please help me to avoid this error?
If I start a long running query running on a background thread is there a way to abort the query so that it does not continue running on SQL server?
The query would be running on SQL Server 2005 from a Windows form application using the Background worker component. So the query would have been started from the background workers DoWork event using ado.net. If the user clicks an abort button in the UI I would want the query to die so that it does not continue to use sql server resources.
Is there a way to do this?
Thanks
I hope I am not asking about something that has been done before, but Ihave searched and cannot find an answer. What I am trying to do is torun a query, and then perform some logic on the rowcount and thenpossibly display the result of the query. I know it can be done withADO, but I need to do it in Query Analyzer. The query looks like this:select Varfrom DBwhere SomeCriteriaif @@Rowcount = 0select 'n/a'else if @@Rowcount = 1select -- this is the part where I need to redisplay the resultfrom the above queryelse if @@Rowcount > 1-- do something elseThe reason that I want to do it without re-running the query is that Iwant to minimize impact on the DB, and the reason that I can't useanother program is that I do not have a develpment environment where Ineed to run the queries. I would select the data into a temp table, butagain, I am concerned about impacting the DB. Any suggestions would begreatly appreciated. I am really hoping there is something as simple as@@resultset, or something to that effect.
View 6 Replies View Related
Hey...
I am running a parent SSIS package (running sp2, 9.0.3042) that calls several child packages.
On our development server, we now cannot run this because we get 1 or more of these errors:
"Error 0x80004003 while preparing to load the package. Invalid pointer . "
"Error 0xC0011008 while preparing to load the package. Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored. . "
It is not occuring on the same packages. It varies every time it is run.
I can run every one of the child packages individually, using the same login ID that the parent is executed under.
The parent package works fine on my local machine and other servers running the same version of SSIS. Just not on this server.
Does anyone have any ideas???
Thanks
BobP
I am sync. for the first time (Merge Replication using SQL 2005 and Mobile) and this error keeps poping up on the emulator. I am tring out the tutorial. :) boss on my butt.
Does anyone have any ideas or a solution to this...your help is WELL APPRECIATED ...
Error code: -2147024809
zo
I have an update query running which to just now has been running for 22 hours running on two tables 1 a lookuptable that has just been created within the batch the other a denormalised table for doing data analysis on
the query thats causing teh problem is
--//////////////////////////////////// this is the one thats running
Print 'Update Provider 04-05 EmAdmsCount12mths : ' + CAST(GETDATE() AS varchar)
GO
Update Provider_APC_2004_05
set EmAdmsCount12mths =
(Select COUNT(*)-1
from Combined_Admissions
where ((Combined_Admissions.NHSNumber = Provider_APC_2004_05.NHSNumber) or
(Combined_Admissions.PASNUMBER = Provider_APC_2004_05.PDDISTNO)) and
(Combined_Admissions.AdmDate BETWEEN DateAdd(yyyy,-1,Provider_APC_2004_05.AdmDate) AND Provider_APC_2004_05.AdmDate) AND
Combined_Admissions.AdmMethod like 'Emergency%')-- and
-- CA.NHSorPrivate = 'NHS'))
FROM Provider_APC_2004_05, Combined_Admissions
any help in improving speed would be most welcome as there are 3 more of these updates to run right after this one and the analysis tables are almost double the size of this one
Dave
I have 2 requests for desperate Hélio..
1) is there any way to run a query over a query without having to create a table with the results of the first query? (would drop table work? If so, how?
2) how can i define input variables the same way i do in excel? I am trying to run a couple of simulations based on 2 core inputs (in excel i would just do a data table)
Hi there
I have small problem with the ADO 2.6 - 2.8 Command object.
I created a Stored procedure preforming some tasks within a tran.
whitin the tran i'm collecting the @@ERROR values and in the end (after tran closing )generating the correct error string - which will be send back to the caller
in the VB6 app, i'm using a command object with the next line:
Set MyRecordset= MyCommand.Execute
In all the cases and option, when i run the SP - the command preform the tasks and return closed recordset (with the currect answer) and i can't read it.
the only solution that worked until now: i need to call MyRecordset.Open which will requery the SP again and generate an error (User defined error).
It happens only when i run command.execute with SP that preforms multitasks and return result recordset.
CAN ANY ONE HELP ME
Hi,
I get this error dialog when I try to open all the rows of any table from Enterprise manager..
Any help would be really appreciated..
Thanks,
-Srini.
Hi guys. I'm looking for help to run a query that should come out looking like this
unit reports_to
Development Dept Representative Div
Systems Group Development Dept
Design Section Systems Group
Production Spec Section Systems Group
Proposal Section Systems Group
This is the table i have to work from
UNITNOORGNAME PARENTBUDGET
2000Representative Div1000459000.0000
2100Development Dept2000391000.0000
2110Systems Group 2100332000.0000
2111Proposal Section211087000.0000
2112Design Section 2110132000.0000
2115Production Spec Sect211068000.0000
I can't see any way of doing this query though I know the PARENT is the reports_to column and that the UNITNO is the Department but can't find any way to run the query. Hoping you guys can help
Thanks
Presumably, an RDL data set is only queried once before generating a report. And presumably, this is true even if the data set feeds a list control. However, I'd like to know if I can cause a data set to be queried repeatedly from a list control. I need to do this, because the data set contains aggregate functions that would be impacted by each "pass" the list control would make.
Is it possible to make a data set queried repeatedly in this fashion?
I have a pretty complex query that aggregates lots of data and inserts multiple rows of that data into a reporting table. When I call this SPROC from SQL Server Management Studio, it executes in under 3 seconds. When I try to execute the same SPROC using .NET's SqlCommand object the query runs indefinitely until the CommandTimeout is reached. Why would this SPROC behave differently with the same inputs, but being called from .NET? Thanks for your help!
View 3 Replies View RelatedWhen I execute the following stored procedure it runs for about a minute.
CREATE PROCEDURE EquipmentListByProduct
(
@iProdTypeId int
)
AS
SET NOCOUNT ON
DECLARE@iError int, @iRows int
SELECT pn.prodTypeId, pn.prodId, pn.prodName
FROM prodNames pn
WHERE pn.prodTypeId = @iProdTypeId
SELECT@iError = @@ERROR, @iRows = @@ROWCOUNT
IF ( @iError <> 0 )
BEGIN
RETURN@iError
END
IF ( @iRows = 0 )
BEGIN
RETURN-1
END
RETURN@iError
GO
The table only has 22 records.
Do I need to index the table? If so how do I do this?
Ok,
here's a funky one That I can't find an expanation for. If I go into EM and choose a table from a database and return all rows, I get immediate results and can start browsing records. If I go into query analyzer and do a select * on the same table, it takes up to 20-25 minutes to return the result set. This used to only take like 5 mins. What gives? Anyone seen this before?
Hi Everybody,
I have two SQL server one in the office and other on remote location. I have some data on SQL in the office and some data on remote location and need to query the data.
how can I do that ?
Thanks for your help in advacne
Can someone please let me know how i can set up a query to execute once a week lets say on tuesdays at 6 am...
i do not see how i can set this. can anyone help me please
Hi
I am install sql 2000, Server is running properly
but query analyer is not working...
Thanks
ASM
Hi,
I'm running SQL 2000 SP4.
On this server I have a few databases. I need to run the below query against each database. Since the server has approx 50 databases this will take time.
Is there any way for me to modify this so as it will automatically
run against each database one at a time and then create a single output file with all the results.
I do not want it to run against all of the databases at the same time as it will kill my server so it must run and gather results on each database at a time.
QUERY to be run
SELECT RelativeFileName
FROM Collection, Saveset
WHERE Collection.CollectionIdentity = Saveset.CollectionIdentity
Hello all,
Can anyone please tell me what query to use for joining two tables in two databases together?
Basically, we have two databases called 'system' and 'site' respectively. The 'system' database has a table called 'users' and each user has a unique id which is also linked to the tables in the 'site' database.
The only problem i have got is, I want to be able to get the actual user names not the unique id and the only way to get this from my SQL statement is to be able to link the uniqueid for each user in the 'site' database to their corresponding uniqueid in the 'system' database.
Please, how can I do this?
Hi,I have a DLL that I want to run from the Query Analyzer. I tried thefollowing:USE master;EXEC sp_addextendedproc BLAH, '\Other-ServerPathToBlahBlah.dll'and I get the error:ODBC: Msg 0, Level 16, State 1Cannot load the DLL \Other-ServerPathToBlahBlah.dll, or one ofthe DLLs it references. Reason: 126(The specified module could not befound.).The DLL was written in Cobol. The "Other-Server" in the Path above isthe server that Cobol (and the DLL) is located on.I looked at the dependencies for the DLL and it includes (notsurprisingly) Cobol Dll's. It should find those on the other server.What can I do?Thanks!
View 5 Replies View RelatedHi,
I'm trying to optimize a long running (several hours) query. This query is a cross join on two tables. Table 1 has 3 fields - ROWID, LAt and Long. Table 2 has Name, Addr1,Addr2,City,State,Zip,Lat,Long.
Both tables has LatRad - Lat in radians, LonRad- Lon in Radians. Sin and Cos values of Lat and Lon are calulated and stored to be used in the distance formula.
What I'm trying to do here is find the nearest dealer (Table 2) for each of Table 1 rows. The Select statement takes a long time to execute as there are about 19 million recs on table 1 and 1250 rows in table 2. I ran into Log issues- filling the transaction log, so I'm currently using table variables and split up the process into 100000 recs at a time. I cross join and calculate the distance (@DistValues) and then find the minimum distance (tablevar2) for each rowid and then the result is inserted into another Table (ResultTable).
My Code looks like this:
Declare @DistValues table (DataSeqno varchar(10),Lat2 numeric(20,6),Lon2 numeric(20,6),StoreNo varchar(60), Lat1 numeric(20,6),Long1 numeric(20,6),Distance numeric(20,15))
Declare @MinDistance table (DataSeqno varchar(10) primary key,distance numeric(20,15))
Insert into @DistValues
Select DataSeqno,T.Lat Lat2,T.Lon Lon2,S.StoreNo,S.Lat Lat1,S.Long Long1,
distance=3963.1*Case when cast(S.SinLat * T.SinLat + S.CosLat * T.cosLat * cos(T.Lonrad - s.Lonrad) as numeric(20,15)) not between -1.0 and 1.0 then 0.0 else acos(cast(S.SinLat * T.SinLat + S.CosLat * T.cosLat * cos(T.Lonrad - s.Lonrad) as numeric(20,15))) end
from dbo.TopNForProcess T , dbo.Table2 S where Isnull(T.Lat,0) <> 0 and Isnull(T.Lon,0)<> 0
Insert into @MinDistance
Select DataSeqno,Min(distance) From @DistValues Group by DataSeqno
Insert into ResultTable (DataSeqno,Lat2,Lon2,StoreNo,LAt1,Long1,distance)
Select D.DataSeqno, D.Lat2, D.Lon2, D.StoreNo, D.LAt1, D.Long1, M.distance from @DistValues D Inner Join @MinDistance M on D.DataSeqno = M.DataSeqno and D.Distance = M.Distance
I created a View called TopNForProcess which looks like this. This cut down the processing time compared to when I had this as the Subquery.
SELECT TOP (100000) DataSeqno, lat, Lon, LatRad, LonRad, SinLat, cosLat, SinLon, CosLon FROM Table1 WHERE (DataSeqno NOT IN (SELECT DataSeqno FROM dbo.ResultTable)) AND (ISNULL(lat, 0) <> 0) AND (ISNULL(Lon, 0) <> 0)
I have indexes on table table1 - Rowid and another one with Lat and lon. Table2 - Lat and Long.
Is there any way this can be optimized/improved? This is already in a stored procedure.
Thanks in advance.
I am trying to write a query that gets daily sales for each of our stores plus WTD and MTD totals
columns would be
Store date daily_total wtd_total mtd_total
the query need to produce a row per store per day and have the wtd sum reset for each week so that it
sums up sales day by day for that week
Is there a good way to do this?
hi
if suppose one query is running slow than what steps we can follow to optimize it...
this question is asked me in interview.
thanx
Hi,
I have a query that has cursor loop.
in each loop there is many sql update commands.
it runs good in sql2000.
now when i run it in sql2005 it continue for a long time and not finish.
when i run each command that within the loop alone it runs good, but when i run it all together its not finish running.
i dont get any error. i think maybe the table that i'm bulk updating is in some lock and this is why it stuck in the running and not finish.
Is there a way to make sure that there is no lock on a table before i update it during my running.
Thanks.
I'm getting an error when I try to import a flat file package from SQL, when I created it on Visual Studios it runned fine.
I'm getting this error on SQL when I try to run the job:
Executed as user: MAINOFFICEASPNET. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:30:01 PM Error: 2007-09-11 23:30:06.56 Code: 0xC001401E Source: Import_GasBoyData Connection manager "RawTrans" Description: The file name "\Mt111gasboyPC TopKATFiles
awtrans.dat" specified in the connection was not valid. End Error Error: 2007-09-11 23:30:06.56 Code: 0xC001401D Source: Import_GasBoyData Description: Connection "RawTrans" failed validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:30:01 PM Finished: 11:30:07 PM Elapsed: 6.063 seconds. The package execution failed. The step failed.
Thanks,
Erick
Hi,
I am trying to run a DTS from SP. The SQL code that I am using is as follows.........
exec master..xp_cmdshell 'dtsrun /S 142.102.27.207 /U sa /P sa /N DTS_TEST1'
But Running this I am getting the the following errror.......
DTSRun: Loading...
DTSRun: Executing...
DTSRun OnStart: DTSStep_DTSDataPumpTask_1
DTSRun OnError: DTSStep_DTSDataPumpTask_1, Error = -2147467259 (80004005)
Error string: Error opening datafile: The system cannot find the path specified.
Error source: Microsoft Data Transformation Services Flat File Rowset Provider
Help file: DTSFFile.hlp
Help context: 0
Error Detail Records:
Error: 3 (3); Provider Error: 3 (3)
Error string: Error opening datafile: The system cannot find the path specified.
Error source: Microsoft Data Transformation Services Flat File Rowset Provider
Help file: DTSFFile.hlp
Help context: 0
DTSRun OnFinish: DTSStep_DTSDataPumpTask_1
DTSRun: Package execution complete.
NULL
I am running job which executes SSIS Package.
Iam getting following message as failure of step.
"Non-SysAdmins have been denied permission to run DTS Execution job steps without a proxy account. The step failed."
Can any one help me in this..
Thanks,
ServerTeam
SQL Server 2005 9.0.3161 on Win 2k3 R2
I receive the following error:
"Error: 8624, Severity: 16, State: 1 Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services."
I have traced this to an insert statement that executes as part of a stored procedure.
INSERT INTO ledger (journal__id, account__id,account_recv_info__id,amount)
VALUES (@journal_id, @acct_id, @acct_recv_id, @amount)
There is also an auto-increment column called id. There are FK contraints on all of the columns ending in "__id". I have found that if I remove the contraint on account__id the procedure will execute without error. None of the other constraints seem to make a difference. Of course I don't want to remove this key because it is important to the database integrity and should not be causing problems, but apparently it confuses the optimizer.
Also, the strange thing is that I can get the procedure to execute without error when I run it directly through management studio, but I receive the error when executing from .NET code or anything using ODBC (Access).
I have a simple query (a select statement which retrieves results from 2 tables via join). I run this query every week and just copy the results from Management Studio (Ctrl-A) and then open Microsoft Excel and just paste it there.
Is there a way I can automatically run this every week and generate the Excel from the results? If so what steps I have to do?
I use SQL Server 2005 Express Edition.