Error With Execute DTS 2000 Package Task On 64-bit With 32-bit Exec
Dec 17, 2007
Hello all,
I am running a package on a 64-bit server using the 32-bit dtexec. It contains an embedded Execute DTS 2000 package. I deployed the package to the server using the sa account. I set up a SQL Agent job that runs under an account that should have complete admin privileges. The network guys tell me that Legacy components have been installed (although I believe that shouldn't be necessary because SSIS is installed). This is SQL Server 2005, SP2.
When I execute this job, I receive this error message:
Executed as user: Domainuser. ...age Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:13:18 AM Error: 2007-12-17 11:13:35.65 Code: 0xC0010018 Source: Execute DTS 2000 Package Task Description: Error loading a task. The contact information for the task is "Execute DTS 2000 Package Task;Microsoft Corporation; Microsoft SQL Server v9; ? 2004 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". This happens when loading a task fails. End Error Error: 2007-12-17 11:13:35.71 Code: 0xC0010026 Source: Execute DTS 2000 Package Task Description: The task has failed to load. The contact information for this task is "Execute DTS 2000 Package Task;Microsoft Corporation; Microsoft SQL Server v9; ? 2004 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". End Error Error: 2007-12-17 11:13:35.71 Code: 0xC0024. The step failed.
Is there any way to get this to run?
Thank you very much,
Jessica
View 7 Replies
ADVERTISEMENT
Feb 1, 2008
I have a "Execute DTS Package 2000 " task in SSIS. The SQL 2000 DTS has one task which precedence is "completion". Using SQL2000 it works properly, but when I invoke it from SSIS it doesn€™t respect the precedence. So, when the task above fails it ends the DTS execution.
Is it possible to configure the task to respect the precedences?
View 6 Replies
View Related
Jan 23, 2008
Hi,
I'm having an SSIS package which gives the following error when executed :
Error: 0xC002F210 at Create Linked Server, Execute SQL Task: Executing the query "exec (?)" failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Task failed: Create Linked Server
The package has a single Execute SQL task with the properties listed below :
General Properties
Result Set : None
ConnectionType : OLEDB
Connection : Connected to a Local Database (DB1)
SQLSourceType : Direct Input
SQL Statement : exec(?)
IsQueryStorePro : False
BypassPrepare : False
Parameter Mapping Properties
variableName Direction DataType ParameterName
User::AddLinkSql Input Varchar 0
'AddLinkSql' is a global variable of package scope of type string with the value
Exec sp_AddLinkedServer 'Srv1','','SQLOLEDB.1',@DataSrc='localhost',@catalog ='DB1'
When I try to execute the Query task, it fails with the above error. Also, the above the sql statement cannot be parsed and gives error "The query failed to parse. Syntax or access violation"
I would like to add that the above package was migrated from DTS, where it runs without any error, eventhough
it gives the same parse error message.
I would appreciate if anybody can help me out of this issue by suggeting where the problem is.
Thanks in Advance.
View 12 Replies
View Related
Feb 21, 2007
I cannot execute a package by using Execute Package task.
I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
Any clue ?
Thanks,
Fahad
View 1 Replies
View Related
Jul 19, 2007
Hi friends,
I have a for each loop that populates from a set of flat files into a Sql Server table, I run the Flat file Import via a dts package embedded into Execute DTS 2000 Task. I want to pass the Sourcefile Name that is fetched by the For Each Loop to assign it Global Variable in DTS. how this can be made ?
Thanks
Subhash Subramanyam
View 4 Replies
View Related
Sep 21, 2006
Hi everyone,
For first time I'm testing this task and surprisingly, when I try "Edit Package" option:
1)The DTS host failed to load or save the package properly
2)The selected package cannot be opened
3)Error HRESULT E_FAIL has been returned from a call to a COM component
But after these messages you can see all the tasks but they haven't name!!
It seem as if RCW mechanism has failed between managed and unmanaged coded-partially.
I don't dare to follow doing more stuff, I don't know if that package is well-loaded or not from there. ?¿
Any guidance or idea about this?
View 5 Replies
View Related
Apr 26, 2006
I have imported a series of SQL 2000 DTS packages to our 64bit AMD SQL 2005 server. I then created SSIS pkgs to run each SQL 2000 package using the Execute DTS 2000 package task. Then I deployed these packages to the Yukon server as well.
I can run these packages when launching them via Integration Services from Management Studio on my workstation, but when I try to run them via a SQL Job or the DTExec command on the server, I get this error. Anyone know of a workaround?
OnError,xxxxxx,xxxxxxx,Execute DTS 2000 Package Task,{94769783-575C-4D1E-90F6-C2BDB3EA3CE2},{E05551C1-CDDE-40E3-87B4-C65D4E1B3A53},4/26/2006 3:01:37 PM,4/26/2006 3:01:37 PM,0,0x,This task does not support native Win64 environment. Please run the package in 32-bit WOW environment instead.
OnError,xxxxxx,xxxxxxx,Execute DTS 2000 Package Task,{94769783-575C-4D1E-90F6-C2BDB3EA3CE2},{E05551C1-CDDE-40E3-87B4-C65D4E1B3A53},4/26/2006 3:01:37 PM,4/26/2006 3:01:37 PM,-1073594105,0x,There were errors during task validation.
Is the DTS 2000 Package Task not supported on Win64?
I have installed the SQL Server 2000 DTS components from the November feature pack on both my workstation and the server.
Thanks for your help!
View 4 Replies
View Related
Jun 8, 2007
I am having problems executing a child package from a parent package using the Execute Package Task. I am attempting to run the master package through a SQL Server Agent job.
The SQL Server Agent job is owned by sa. The step that runs the parent package is configured to load the package from the SSIS Package Store on the same server that the job is running.
I have the Execute Package Task configured as follows:
Location: SQL Server
ExecuteOutOfProcess: True
Connecting as a SQL Server login (let's say TestEtl)
I have added the db_dtsoperator database role to both the TestEtl login and the login that SQL Server Agent connects through. I have also configured the child package's reader role to include db_dtsoperator. Per http://msdn2.microsoft.com/en-US/library/ms141053.aspx, this should allow these logins to run the child package.
I have enabled logging of all events in both the parent and child packages. I see the following in the logs when the Execute Package Task executes (omitted portions unrelated to the execution of the child package task):
450939 OnPreExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450940 OnPreValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450941 OnPostValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450942 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDataInitialize::GetDataSource'.450943 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDataInitialize::GetDataSource succeeded'. The external request has completed.450944 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBInitialize::Initialize'.450945 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBInitialize::Initialize succeeded'. The external request has completed.450946 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBCreateSession::CreateSession'.450947 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBCreateSession::CreateSession succeeded'. The external request has completed.450948 OnError ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450949 OnError ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450950 OnTaskFailed ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450951 OnPostExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450952 OnWarning ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. 450953 OnPostExecute ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450954 PackageEnd ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 End of package execution.
I am sure that what I am doing is quite common, and I obviously have something misconfigured somewhere - but I'm not sure what my misconfiguration is. Can anyone enlighten me?
View 6 Replies
View Related
Mar 25, 2008
I have a package A which has execute package task which tryes to execute package B.
I am able to execute package B directly but when i execut epackage A.Its able to open package B but its failing at the very first task in B.The error iam getting is like this
Error: The task "Setup Connections" cannot run on this edition of Integration Services. It requires a higher level edition.
Has any one come accross this before...Help
Thanks
View 1 Replies
View Related
Feb 19, 2008
Hi,
I have a Load package which calls 3 other subpackages within it through the execute package task.
When i run the package thru batchfile it runs fine.
But when we run thru Autosys job scheduler i get the following error for the subpackages.
Code: 0xC00220DE
Source: Execute Package Task1
Description: Error 0x80070003 while loading package file "". The system cannot find the path specified.
i have given the path in the config file,which has the server name and the path of the subpackages.
Has anyone come across this situation before.
Pls help!
Thanks,
SVGP.
View 4 Replies
View Related
Feb 9, 2006
I'm trying to run a package from another package using Execute package task -
I'm getting the error:
Error: Error 0xC0012050 while preparing to load the package. Package failed validation from the ExecutePackage task. The package cannot run. .
I have Delay validation on the child package. Any other suggestions?
Thanks
View 13 Replies
View Related
Mar 3, 2008
Hi All,
I have strange problem. I have a package task that is setup to run a package from a file source. The package ran fine originally but VS placed a shared drive letter for the path. I went back to change it to a UNC path and now the package fails and gives an error saying the connection is not valid and that it failed validation. Going back into the connection manager to check the path and it looks good, even pressing the Browse button shows the correct directory.
What am I doing wrong?
View 5 Replies
View Related
Jun 8, 2007
Hi,
We have used an execute package task in our master package to execute a child package and we have set the execute out of process=false. This master package is running fine in 32 bit server but is failing in 64 bit server. is there any settings to be done in the server or is it the problem with the property setting(execute out of process)
Vivek S
View 1 Replies
View Related
May 24, 2007
Hi there,
I'm creating an SSIS package that will execute legacy dts packages. The package to be executed is decided at runtime using a sql query task.
Executing a dts package statically works fine, but when I try to set the details of the dts to be run via expressions, I get the error below.
To make it dynamic, I created a variable of type string, and put the package name in here. I also have a string variable for the packageid. Then I set up an expression on the Execute DTS 2000 Package Task that sets the PackageName & PackageID property to this variable.
The PackageId is a string variable I've retrieved using:
select top 1 name,
cast(id AS varchar(50)) id,
cast(versionid AS varchar(50)) versionid
from sysdtspackages
where name = @PackageName
order by createdate desc
When I use the task to set the package id it works find (by selecting a dts, then changing the name), but when I try to provide the package id I get this message:
Error: 0x0 at Execute DTS 2000 Package Task: System.Runtime.InteropServices.COMException (0x8004040E): Invalid GUID specified.
at DTS.PackageClass.LoadFromSQLServer(String ServerName, String ServerUserName, String ServerPassword, DTSSQLServerStorageFlags Flags, String PackagePassword, String PackageGuid, String PackageVersionGuid, String PackageName, Object& pVarPersistStgOfHost)
at Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.PackageUtils.LoadDTS8Package(String pkgSrc, String sourceUser, String sourcePwd, Int32 srcType, Boolean bUseTrustedConnection, String packageName, String packagePassword, String packageID, String packageVersionGUID)
at Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.Exec80PackageTask.LoadPackage()
at Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.Exec80PackageTask.ExecuteThread()
Task failed: Execute DTS 2000 Package Task
but the method signature specifies String PackageGuid, and it is a string..
any ideas??
i tried casting the variable like so:
(DT_GUID) @[User:TSPkgId], as the versionid is a uniqueidentifier on sysdtspackages.. It didn't like that at all (can't cast from type DT_WSTR to DT_GUID error code 0xC00470C2)
View 8 Replies
View Related
Mar 24, 2006
I have a main package that calls several other packages using Execute Package Tasks. I also have OnPreExecute, OnPostExecute, and OnError event handlers at the package level to audit the beginning and completion of each package. I want to prevent each task from bubbling up to the package event handlers as well as prevent each task from bubbling up to the main package event handlers. I've tried setting the Propagate variable for each of the event handlers to False and setting the DisableEventHandlers property of each task to True but neither solution seems to work. Is there a way to do this that I'm missing?
View 8 Replies
View Related
Jan 28, 2008
I'm converting a package from DTS to IS. My manager does not want to spend the time re-writing it to make use of the Script task so that's why I'm using a DTS 2000 task which contains some ActiveX.
The tasks themselves run fine when I'm in the designer and click the run button, but when part of the entire package it fails. I search on the error message and nothing comes up.
This is the error message:
Error: System.Runtime.InteropServices.COMException (0x8004043B): Exception from HRESULT: 0x8004043B at DTS.PackageClass.Execute() at Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.Exec80PackageTask.ExecuteThread()
I've set them to run on the main thread but that doesn't seem to help.
Any help would be greatly appreciated!
Thank you,
Kelly
View 4 Replies
View Related
Jun 20, 2006
I have a package (PackageA) with an Execute Package Task that execs PackageB. When I run PackageA I get this error on the Execute Package Task :
Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
PackageB has 'EncryptSensitiveWithUserKey' ProtectionLevel. I'm providing passwords in the dtsConfig so I'm guessing I should change it to 'DontSaveSensitive'?
Interestingly, PackageA also has 'EncryptSensitiveWithUserKey' ProtectionLevel, but I don't get an error about PackageA, just on the task that runs PackageB.
(SP1 is installed).
View 9 Replies
View Related
Jun 30, 2006
I have a simple SSIS package with three "Execute SQL Tasks". I am using ADO.Net Connection to execute SPs on a DB server.
When I execute this package It works fine. So far so good.
Now, I need to implement transation on this package. And problem starts now onwards. When I try to execute package after setting TransationOption = Required for the Sequence container which contains all the tasks, I get following error.
[Execute SQL Task] Error: Failed to acquire connection "NYCDB0008.Export". Connection may not be configured correctly or you may not have the right permissions on this connection.
"NYCDB0008.Export" is the name of the ADO.Net connection. I have been hunting for any solution but all in vain. I have tried changing all DTC settings on the dev as well as Database server.
Please respond if anyone has any solution.
Thanks!
Anand
View 24 Replies
View Related
Sep 4, 2006
Hi,
I am not comfortable with DTS 2000 but I need to execute a encapsulated DTS 2000 package from a SSIS package. The real problem is when I need to pass SSIS variables to DTS 2000 package. The DTS 2000 package have 3 global variables that I can identify on " Execute DTS 2000 Package Task Editor - Inner Variables ". I believe the SSIS variables must be mapped on " Execute DTS 2000 Package Task Editor - OuterVariables ". How can I associate the SSIS variables(OuterVariables ) to "Inner Variables"? How can I do it? Much Thanks.
João
View 8 Replies
View Related
Apr 19, 2007
I'm looking for a way to refer to a package variable within any
Transact-SQL code included in either an Execute SQL or Execute T-SQL
task. If this can be done, I need to know the technique to use -
whether it's something similar to a parameter placeholder question
mark or something else.
FYI - I've been able to successfully execute Transact-SQL statements
within the Execute SQL task, so I don't think the Execute T-SQL task
is even necessary for this purpose.
View 5 Replies
View Related
Feb 22, 2007
How do I do this ? Or is there any way to bundle Package with Config file so that they both are deployed in MSDB?
View 5 Replies
View Related
Aug 25, 2006
I use a execute package task to run a child package in which I run some sql task.
as the error handle I insert a script task and link a line from execute package task to script task
of course the line is red,
but I found when the child package failed, the execute package task turns red,it stopped
the script task can't be run, I don't konw why?
View 9 Replies
View Related
Jan 19, 2008
Hi,
I am calling one SSIS package from another using the Execute Package Task.
I also need to pass a parameter to the called SSIS package.
Can I do this? If yes, how? If no, then what will be the work-around for this?
Thanks in advance.
View 16 Replies
View Related
Dec 6, 2006
Dear all:
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
Many thanks,
Tomorrow
View 5 Replies
View Related
Mar 16, 2007
I am using many Execute Package Tasks in a DTS packages to call a number of other DTS packages. The problem is that when I change one of the called DTS packages the execute package task does not run the updated packages. It looks like the execute package task references a Package ID guid instead of the name. Is there a way to make it so a change to a called DTS package will reflect in all references to it
View 2 Replies
View Related
Jul 21, 2007
I am missing something simple that's killing me.
I am trying to execute a child ssis package using the execute package task. I add execute package task to the parent package and in the package task editor, under the package options I choose: filesystem for location, I choose new connection and create a connection to the package on the filesystem I want to execute, packagenamereadonly is blank. I execute the parent package and get an error that I did not specify the name of the package in the execute package task object. Now, since I can't populate the package name, as that option is readonly, I am not sure how to remove my headache. Anyone see what I'm doing wrong? None of these packages have security.
-Aaron
View 1 Replies
View Related
Feb 13, 2008
Hi All,
I have a master package that has 3 child packages,so iam taking the child packages from the D drive of my QA machine.
I have used environmental variables to define the path in packages configurations,so that same environmental variables can be used to point to production server path.
The package is able to run on production server but it still fetching data from QA server.
Is the any other way to do it better.
How to use the subpackages in production server.
Please help.
Thanks,
SVGP
View 5 Replies
View Related
Mar 6, 2008
Hi.
I have a master package, which executes child packages that are located on a SQL Server. The Child packages execute other child packages which are also located on the SQL server.
Everything works fine when I execute in process. But when I set the parameter in the mater package ExecutePackageTask to ExecuteOutOfProcess = True, I get the following error
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "Row Count" (5349).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Custom Split" (6399).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Data Source" (5100).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "DST_SCR Load Data" (6149).
The child packages all run fine when executed directly, and the master package runs fine if Execute Out of Process is False.
Any help would be greatly appreciated.
Thanks
Geoff.
View 7 Replies
View Related
Apr 21, 2006
I have five DTS packages on a server.
Instead of executing these DTS packages individually, I have decided to create a 'parent' DTS package that will fire off each of the five 'child' DTS packages using 'On Success' precedences.
This seemed like a pretty straight forward task, but when one of the child DTS packages fails, the 'parent' DTS package continues to execute the next 'child' DTS package through the 'On Success' precedence. I was expecting the 'parent' DTS to fire off an 'on failure' precendence and stop executing
Can anyone tell me why the 'parent' DTS package continues with the 'on success' precedence after one of the 'child' DTS packages has failed.
Thanks in advance.
View 2 Replies
View Related
Jan 20, 2006
I€™m using a For Loop container to with an Execute Package Task inside, looping until a folder is empty. I€™ve noticed some strange behaviors:
1. The child package keeps creating new connections. I start with 3 connections to the DB and when the For Loop container is done I€™ve got 364 connections.
2. The Execute Package Task is pulling the wrong version of the package I€™ve specified. I€™m using a package saved to the File System and there€™s only one copy on the drive. I€™ve verified the path is going to the correct location.
Does anyone have a work-around for the €˜connection generation€™ issue?
TIA
Eric
View 1 Replies
View Related
Jan 27, 2008
I have added a package from SQL Server to another package as an "Execute Package Task" it fails with this error:
Error: Error 0xC0014062 while preparing to load the package. The LoadFromSQLServer method has encountered OLE DB error code 0x80040E14 (Only the owner of DTS Package 'nVision_AgentPump' or a member of the sysadmin role may create new versions of it.). The SQL statement that was issued has failed. .
I tried setting the Protection Level to "don't save sensitive", and running the package in process and out. Any idea where to look?
Thanks,
Kayda
View 6 Replies
View Related
Sep 26, 2006
I have a package (i.e. child package) which runs itself perfectly fine without displaying any error.
However when I embeded this package inside another package (i.e. parent package) using Execute Package Task. The task always fails. It seems strange enough.
The child package has two variables that need to be passed in from parent package.
Can any expert here please help out? Thanks.
- Steve
View 10 Replies
View Related
Nov 7, 2007
Hi,
Is there anyway where i can pass the package name to an "execute package task" and run it through loop. My loop task will pass the package name which is assigned on a variable and the execute package task should pickup the name and run, is this possible, if yes how?
View 3 Replies
View Related
