Error With Flow Logic When Creating A JOB
Jul 20, 2005
I have a sql server automatic job set up containing 2 steps.
First step is an Operating System Command (CmdExec) type job which
runs a .bat file which copies across a backup file to this machine.
The second step is a Transact -SQL Script (TSQL) type job which runs
the RESTORE DATABASE REPLACE command which restores the backup file
copied across in step 1.
Step 1's advanced option says: On Success Action: Goto Step [2]
Restore the database.
Step 2's advanced option says: On Success Action: Quit the job
reporting success.
On clicking ok I receive the error message:
"WARNING: The following job step(s) cannot be reached with current
flow logic: [1] Transfer the Backup File. Are you sure this is what
you want".
The job fails to run.
Both steps do run successfully when set up as two separate jobs - not
like this which has the two steps in one job.
Anyone have any ideas as to what the flow logic problem is?
Thiko!
View 2 Replies
ADVERTISEMENT
Nov 13, 2014
I could deploy across my environment, which is a mix of 2008R2/2012 servers, to give some information on log files. Running into a silly issue right off the bat. The table that DBCC LogInfo() conjures out of magic is different between the two. In 2012 it gained the RecoveryUnitID column. So I'm trying to write some logic to create a temp table based on which version is running. I would like to avoid a global temp table if possible. Here's what I've tried:
sp_executesql creates a table outside of the scope of my session:
DECLARE @PrVers NVARCHAR(128)
, @PrVersNum DECIMAL(10,2)
, @StageTable NVARCHAR(1024) = N''
[code]....
View 9 Replies
View Related
Nov 14, 2007
Hi friends,
Im just a little unsure of somethingl If i have, for instance, 2 containers with both containing control flow items, and container 1 flows into container 2 (thus ensuring that container 1's items are executed first), how do I set the control flow to NOT execute containers 2 at all if any of the items of container 1 has failed BUT ensuring that container 1's items are ALL executed even though some in container1 might fail.
Thus I want all items in container1 to at least execute but only if all are successful should the control flow execute container 2's items.
Regards
Mike
View 6 Replies
View Related
May 19, 2008
Dear All,
I have a table A with a KEY column and SSN column.
KEY = 12 digits ( first 3 digits are Department Id , and last 9 digits are SSN)
I have a table B with SSN column only.
both KEY and SSN columns are Primary keys so duplicate entries must be Avoided.
Table A is intended to be popluated weekly from TXT file (SSIS package RUN). I want to achieve somethign like this..!
P-Code sample:
for each Row in TXT file
if TXTfile.KEY = TableA.KEY then
skip and Read/Go to next Row in TXT file
else
INSERT TXTfile.KEY into TABLEA.KEY
SSN_Var = EXTRACT the SSN part (SSNpart.READ)
if SSN_VAR.Exists In TableB.AnyRow then
skip
else
Insert into TableB
End If.
End If
End For Loop.
-----------------------------------------------------------------
Using SSIS controls, what will be best flow and logic to achieve this.....?
any sample scripting code ????
Many Thanks.
View 9 Replies
View Related
Jul 16, 2015
I am need to create comma separated list in sql and I am using below query.
declare @ConcatenatedString NVARCHAR(MAX)
select @ConcatenatedString = COALESCE(@ConcatenatedString + ', ', '') + CAST(rslt.Number AS NVARCHAR)
from
(
select 1 Number
union
select 2 Number
union
select 3 Number
)rslt
select @ConcatenatedString
When I use the above code inside a function, i am not getting desired output.
create function GetConcatenatedValue
AS
(
declare @ConcatenatedString NVARCHAR(MAX)
select @ConcatenatedString = COALESCE(@ConcatenatedString + ', ', '') + CAST(rslt.Number AS NVARCHAR)
from
(
select 1 Number
union
select 2 Number
union
select 3 Number
)rslt
return @ConcatenatedString
)
View 3 Replies
View Related
May 7, 2015
I have created a matrix report having  "Probability"  in Row and "Impact" in Column  and "Risk ID" in Data Part .
Now the problem which I am facing is I need to fill matrix with different color value based on combination of Probability and Impact.
I am able to write the expression in "Fill" area of "Risk_ID" text box but the problem is only those text box gets colored which are having Risk-Id value in it like shown below.I want all text box to be colored even if no Risk_Id is there in any text box.
I am trying writing the correct logic so that all text box gets colored even if there is no Risk _Id in it.
View 6 Replies
View Related
May 19, 2007
I'm trying to create a custom data flow destination, and it has a custom property that needs to get value from variable(similar to the FileNameVariable property of Raw File Destination), how can I do that?
View 5 Replies
View Related
Nov 30, 2006
I have a table that holds in each record an image (varbinary(max) actually), a text reference for the image and a MIME type for the image. I need to read this table and for each record that has been created since the last run, I need to create a file with the image as the content, the mime type as the file extension and the text reference as the file name. There will be one file created per record found by the data flow source.
I was assuming that I could use the flat file destination and manipulate the file naming using the contents of each record in the flow but am completely stumped on how to achieve this.
Does anyone have any ideas?
thanks
View 3 Replies
View Related
Jan 2, 2008
Hi,
I need to parameterize some values in the data flow so that i can chnage the values directly in parameter file and re run the data flow for new value in the passed in the parameter. This can be easy for other who do not know about the flow of data flow task as to where to change the variable/parameter.
How can this be accomplished. I want the data flow task to refer to this file before it starts executing and pick the appropriate value from the file.
Or is their any better way to accompalish what i want to do here in SSIS.???
tHNAKS FOR UR HELP FOLKS !!!
View 2 Replies
View Related
Jul 20, 2005
Declare @mx intSet @mx = (select max(score)from ,,,where ,,,,andsubstring(city,1,1)='g')select score,@mxfrom ,,,,where ,,,, andsubstring(city,1,1)='g')group by scoregothis seems to work for small tablesbut when table is big and substring(city,1,1)='g')condition is not met it takes aweful time like goesin an infinit loop.--Sent by 3 from yahoo part of comThis is a spam protected message. Please answer with reference header.Posted via http://www.usenet-replayer.com
View 1 Replies
View Related
Jul 5, 2006
Hi There
I am having a little trouble with something very simple:
I have a stored procedure with the following sql in it:
UPDATE mfsWS_CustNewCustomer SET Result_Id = 0 WHERE QueryGUID = @Guid
IF (@@ERROR <> 0)
BEGIN
RAISERROR ('Error setting Result_Id', 16, 1)
UPDATE mfsWS_CustNewCustomer SET Result_Id = 1 WHERE QueryGUID = @Guid
RETURN
END
To test if this works i SET the Result_Id = 'X' this is a smallint column so this should not work.
My issue is that all i get is the error:
cannot convert char to numeric etc etc
However the @@ERROR logic is not executed , my error is not raised and the update does nto happen, it si as though the entire sp aborts at the point where i try do the bogus update.
Is there something i should SET at the beginning of my sp or something ? How do i ensure that any error will be passed to the logic that checks @@ERROR and performs the appropriate actions ? This is SS2000, so i cannot use try catch.
Thanx
View 10 Replies
View Related
Apr 10, 2007
Hello,
I have a simple SSIS package running under SQL 2005 SP2a.
In the data flow, I have several lookup transforms with error outputs. Each error output links to its own audit transform and then writes data to its own flat file destination.
After the data flow is complete, my control flow will then use a ForEach file container to mail the flat files to the source system data owners with a message about incomplete/inconsistent source data. I am effectively providing feedback to the source owners so that we may improve the quality of data that gets sent to us.
My problem is that the flat file (which contains the offending rows) seems to get created everytime even when there were no errors in the lookup in question. Thus my ForEach container will always send a mail to the data source teams even if there were no errors as the error flat file will always exist albeit empty.
How can I stop this happening? How can I only create flat files when there really were errors? How can I prevent the source teams from receiving feedback emails when there is no reason to?
Thanks in advance
MGale1
View 1 Replies
View Related
Nov 27, 2007
every few days i'm getting an error in the application log , eventID 824, saying 'SQL Server detected a logical consistency-based i/o error; incorrect checksum. it then recommends completing a full database consistency check (dbcc checkdb).
i have run the dbcc checkdb ('databasename') and it is returning an error msg of:
Msg 8697, Level 16, State 215, Line 1
An internal error occurred in DBCC which prevented further processing
Msg 8921, Level 16, State 1, Line 1
Check terminated. A failure was detected while collecting facts. Possibly tempdb out of space or a system table is inconsistent. Check previous errors
i have oodles of disk space left. any ideas on where to go from here.
thank you for any help,
-Mark
View 3 Replies
View Related
Dec 27, 2006
please help newbieI need to create a lot of objects the same type (let's say: schemas)I wish to use paramerized block in loop to do so.- how to put names of my objects to such control-flow?belss you for help
View 5 Replies
View Related
Jun 4, 2007
I want to execute a stored procedure in an OLE DB source in a Data Flow Task.
The stored procedure has a parameter.
When I put in an SQL command as :
EXEC sp_readcustomers 1
(thus passing 1 as the parameter value I can use the Preview button and I get a list of columns being returned.
The data flow task should run inside a ForEach Loop where I assign the value of an ADO resultset to a variable and it is this variable I want to pass to the SP :
EXEC sp_readcustomers ?
In the Parameter mapping I then name the parameter @par_company_id (which is the exact same name as in the SP) and map it to the variable var_company_id.
@par_company_id has been declared as int, var_company_id as Int16
When I now try to Parse or Preview the query from the OLE DB Source Edit window I get the following errors :
Parse : Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Preview : No value given for one or more required parameters (Microsoft SQL Native Client)
I have already installed SQL 2005 SP2 and VS2005 SP1.
I have tried everything I know, please help ?!?!
View 3 Replies
View Related
Dec 12, 2007
Hi all, I am getting the following when trying to import text coloums from execl to SQL server 2005. Any ideas?
Error at Data Flow Task [Destination] Coloums "blar" and "Blar_name" cannot convert between unicode and non-unicode sting types.
Any help would be great.
Thanks
Dave
Dave Dunckley says there is a law for the rich and a law for the poor and a law for
Dirty Davey.
View 3 Replies
View Related
Jan 7, 2008
Hi,
I have SQL Server 2005 Express edition on my machine. On an SSIS project in BIDS, when i drag a "Data Flow Task" to the package it returns the following error:
The designer could not be initialized. (Microsoft.DataTransformationServices.Design)
Does this has anything to do with the fact that i don't have SSIS installed on my machine?
I thought that SSIS was only needed (on my machine) for the runtime, just to run the packages. To create and edit the pachages i need to install SSIS on my machine too? this doesn't makes sense, maybe it's another problem.
Can anyone help me on this?
Thank you,
Rafael Augusto
View 10 Replies
View Related
Jul 3, 2007
I am having problems with the Data Flow task. It does not even show up in the list of items to drop into the SSIS project.
If I go to the Data Flow tab and hit create, I get the follow error. I have tried repairing and reinstalling, but nothing seems to clear up the error. Without rebuilding my machine, is there anyone who knows how to get the Data Flow Task reinstalled properly?
Thanks
Wayne
TITLE: Microsoft Visual Studio------------------------------Registration information about the Data Flow task could not be retrieved. Confirm that this task is installed properly on the computer. ------------------------------ADDITIONAL INFORMATION:TaskHost "{C3BF9DC1-4715-4694-936F-D3CFDA9E42C5}"' is not installed correctly on this computer. (Microsoft.DataTransformationServices.Design)For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.762&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=TaskHostNotInstalled&LinkId=20476------------------------------BUTTONS:OK------------------------------
View 1 Replies
View Related
Oct 17, 2006
HI, I HAVE A NEW PROBLEM...HOPE SOMEONE KNOWS WHAT THE $#%#$ IS HAPPENING. HERE IT´S THE THING: I´M USING A DATA FLOW TASK TO READ DATA FROM AN ORACLE SERVER AND TRANSFER THE INFO TO MY SQL 2005 SERVER, THE SOURCE IS AVAILABLE AND THE CONNECTION IS WORKING, I'M USING A DATA READER SOURCE TO CONNECT AND EXTRACT. I´VE PUT THIS DTS IN A JOB AND IT WAS OK, IT HAD BEEN RUNNING OK FOR ALMOST A MONTH BUT SUDDENLY HIS MORNING IT FAILED WITH THE FOLLOWING ERROR:
SSIS package "SAZSIE_CargaVentasSeguros (1).dtsx" starting.
Information: 0x4004300A at Extrae SAZ_GranoO_New, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Extrae SAZ_GranoO_New, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Extrae SAZ_GranoO_New, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Extrae SAZ_GranoO_New, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at Extrae SAZ_GranoO_New, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0047062 at Extrae SAZ_GranoO_New, SAZ_GranoONew [421]: System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.PrimeOutput(Int32 outputs, Int32[] outputIDs, PipelineBuffer[] buffers)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPrimeOutput(IDTSManagedComponentWrapper90 wrapper, Int32 outputs, Int32[] outputIDs, IDTSBuffer90[] buffers, IntPtr ppBufferWirePacket)
Error: 0xC0047038 at Extrae SAZ_GranoO_New, DTS.Pipeline: The PrimeOutput method on component "SAZ_GranoONew" (421) returned error code 0x80004003. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at Extrae SAZ_GranoO_New, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Information: 0x402090DF at Extrae SAZ_GranoO_New, OLE DB Destination [1022]: The final commit for the data insertion has started.
Information: 0x402090E0 at Extrae SAZ_GranoO_New, OLE DB Destination [1022]: The final commit for the data insertion has ended.
Information: 0x40043008 at Extrae SAZ_GranoO_New, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at Extrae SAZ_GranoO_New, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Extrae SAZ_GranoO_New, DTS.Pipeline: "component "OLE DB Destination" (1022)" wrote 19522 rows.
Task failed: Extrae SAZ_GranoO_New
Warning: 0x80019002 at SAZSIE_CargaVentasSeguros: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "SAZSIE_CargaVentasSeguros (1).dtsx" finished: Failure.
THE DATA HAS BEEN COPIED INTO MY DESTINATION TABLE, BUT THE PACKAGE ENDS IN AN ERROR, WHAT IS THE PROBLEM WITH THIS???
PLASE SOMEONE !!!!
THANKS!!!!!!!
View 8 Replies
View Related
Feb 14, 2006
Hi, All,
I need to pass a parameter from control flow to data flow. The data flow will use this parameter to get data from a Oracle source.
I have an Execute SQL task in control flow to assign value to the Parameter, next step is a data flow which will need take a parameter in the SQL statement to query the Oracle source,
The SQL Looks like this:
select * from ccst_acctsys_account
where to_char(LAST_MODIFIED_DATE, 'YYYYMMDD') >?
THe problem is the OLE DB source Edit doesn€™t have anything for mapping parameter.
Thanks in Advance
View 2 Replies
View Related
Apr 19, 2006
I am trying to transfer data from one table to the other using a Data Flow Task of SSIS (SQL Server Integration Services)
I am using an OLE DB Source and an OLE DB Destination.
Source Table TABLE1
Column Datatype
ID - Int ,not null
EmployeeName - nvarchar(50), null
Destination Table TABLE2
Column Datatype
ID - Int ,not null
EmployeeName - nvarchar(50), not null
There are 10 rows in TABLE1 of which 2 have null value in EmployeeName column.
If I try to populate all TABLE1 row values into TABLE2 the data flow will fail as TABLE2.EmployeeName will not accept null value.
So I have inserted a FlatFileDestination into the DataFlow and the OLE DB Destination ErrorOutput is set as input to the FlatFile. In the OLE DB Destination Editor the ErrorOutput€™s error property is set to Redirect Row.
When I do this the 8 correct data from TABLE1 will be inserted into TABLE2 and the two rows with null value will be inserted into the FlatFile.
My requirement is this:
I don€™t want any data to be inserted into TABLE2 but I want the two erroneous records to be written into the FlatFile.
Please suggest.
View 2 Replies
View Related
Dec 7, 2005
I have a SSIS (CTP June 2005) package with several data flow tasks. One data flow has 2 OLEDB data sources which are then unioned together, followed by a conditional split, then a derived column transformation, which feeds into an OLEDB destination. When I run the package, this particular data flow seems to run fine and then just stops. There are no errors and the records counts don't move. I've used data viewers to look at the data and it seems fine. I've switched the OLEDB destination with a flat file and execution runs fine, then switched back to OLEDB and it hangs again (over and over). There's nothing unusual about the OLEDB destination, and all the other OLEDB destinations work fine. It also seems to hang on the same destination row number count, but again that row has been verified as valid. In fact, I dropped the DB table and recreated it with no constraints and all fields nullable, but the problem persists. Help?
View 6 Replies
View Related
Apr 25, 2006
when executing my data flow package that contains only one source and one destination
OLE db source -> SQL server destination
the following errors occurs in my output
Error: 0xC0202009 at Data Flow Task(infraction action), SQL Server Destination [3600]: An OLE DB error has occurred. Error code: 0x80040E14.
Error: 0xC0202071 at Data Flow Task(infraction action), SQL Server Destination [3600]: Unable to prepare the SSIS bulk insert for data insertion.
Error: 0xC004701A at Data Flow Task(infraction action), DTS.Pipeline: component "SQL Server Destination" (3600) failed the pre-execute phase and returned error code 0xC0202071.
i've checked the structure of my source and destination table but nothing seems to be wrong
if someone have ever faced these errors help me :D
View 22 Replies
View Related
Mar 6, 2007
I am trying to execute a Data Flow Task. There is only one task in the data flow task so far, and that is a Flat File Source task. I also set up a Connection Manager for the file, myfile.txt.
When I try to run the Data Flow Task, I get these errors:
The first problem seems to be with the connection, on the first line. What connection element is missing here? The others seem to be truncation errors. I don't know why that is. I changed the column sizes to match the sizes of database columns. They ARE surrounded by double-quotes, but I have {"} specified as a Text Qualifier in my Connection Manager.
Please, need help!
Error: 0xC001000E at : The connection "{F6513CB9-29E2-4D88-A86B-0EF9DFABE9D6}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
SSIS package "MyPackage.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x402090DC at Data Flow Task, Flat File Source [2168]: The processing of file "D:myfile.txt" has started.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Error: 0xC02020A1 at Data Flow Task, Flat File Source [2168]: Data conversion failed. The data conversion for column "Column 0" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
Error: 0xC020902A at Data Flow Task, Flat File Source [2168]: The "output column "Column 0" (2185)" failed because truncation occurred, and the truncation row disposition on "output column "Column 0" (2185)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
Error: 0xC0202092 at Data Flow Task, Flat File Source [2168]: An error occurred while processing file "D:myfile.txt" on data row 1.
Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: The PrimeOutput method on component "Flat File Source" (2168) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DD at Data Flow Task, Flat File Source [2168]: The processing of file "D:myfile.txt" has ended.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Task failed: Data Flow Task
View 5 Replies
View Related
Feb 29, 2008
Hi!
When I add a Data Flow Task to a package, save it and then close. When I open it again, I get 3 errors and the detail of the Data Flow Task is empty.
I had try to uninstall and install my SQL Server 2005, but the problem continues.
Can some one help me on this?
Sérgio Cardoso
View 4 Replies
View Related
Sep 14, 2015
I am using the Visual Studio for Integration Services. and creating a database.I am trying to download data from a Cube table (SALES_HISTORY), using a Microsoft OLE DB provider for Analsysis services 10.0. in this table, it has visible 2 fields (SALE_TRANSACTION_ID) and (TRANSACTION DATE) but have many hidden fields, such CUSTOMER, PART_NUMBER, etc . when I try to create a query in the OLE DB source editor, I can see all the fields, and be able to create the SQL command.
However when I want to preview it or parse the query, I have the following message: 
Exception from HRESULT: 0x0C0202009 error at data flow task [OLE DB Source [1]]: SSIS Error code DTS_E_OLEDBERROR. an OLE DB error has occurred. Error Code 0x80004005.
an OLE DB record is available. Source: " Microsoft OLE DB Provider for Analysis Services 2008". Hresult:0x80004005 description: Query (1,15) error from the SQL query module the 'Customer' column cannot be found in the 'SALES_HISTORY' table...how to extract the data from the visible and also hidden fields (in excel, are called properties).
View 2 Replies
View Related
Mar 9, 2007
I have an Execute SQL Task that returns a Full Rowset from a SQL Server table and assigns it to a variable objRecs. I connect that to a foreach container with an ADO enumerator using objRecs variable and Rows in first table mode. I defined variables and mapped them to the columns.
I tested this by placing a Script task inside the foreach container and displaying the variables in a messagebox.
Now, for each row, I want to write a record to an MS Access table and then update a column back in the original SQL Server table where I retreived data in the Execute SQL task (i have the primary key). If I drop a Data Flow Task inside my foreach container, how do I pass the variables as input to an OLE DB Destination on the Data Flow?
Also, how would I update the original source table where source.id = objRects.id?
Thank you for your assistance. I have spent the day trying to figure this out (and thought it would be simple), but I am just not getting SSIS. Sorry if this has been covered.
Thanks,
Steve
View 17 Replies
View Related
Jan 17, 2008
Dear All!
My package has a Data Flow Task. In Data Flow Task, I use a Script Component and a OLE BD Destination to transform data from txt file to database.
Within Data Flow Task, I want to call File System Task to move file to a folder or any Task of "Control Flow" Tab. So, Does SSIS support this task? Please show me if any
Thanks
View 3 Replies
View Related
May 17, 2007
Hi everyone,
Primary platform is 64 bit cluster.
How to move information allocated in SSIS variables from Data Flow to Control Flow layers??
We've got a SSIS package which load a value into a variable inside a Data Flow. Going back to Control Flow how could we retrive that value again????
Thanks in advance and regards,
View 4 Replies
View Related
Jan 12, 2006
I'm currently setting variables at the package level with an ExecuteSQL task. This works fine. However, I'm now starting to think about restartability midway through a package. It would be nice to have the variable(s) needed in a data flow set within the data flow so that I only have to restart that task.
Is there a way to do that using an SQL statement as the source of the value in a data flow?
OR, when using checkpoints will it save variable settings so that they are available when the package is restarted? This would make my issue a moot point.
View 2 Replies
View Related
Jun 23, 2006
Hopefully this is an easy question:
Inside of a for each loop (looping through an ADO record set of objects to import) I have a data flow task (along with many other processes).... if the dataflow task suceeds I log success in a table. If it errors I want it to fail the dataflow task (which will fire off my Event Handler for that data flow and log the failure, email etc) BUT I want it to continue the loop - I can't seem to figure out how to get the data flow object not to fail the whole loop. If any other objects inside the foreach, other than the data flow, fail I would like the whole loop to fail. Also if possible (but not a requirement) I would like it to have a threshold where if the data flow fails X variable times it will fail the package.
I am having difficulty how to not fail the loop when the import data fails..... just looking for a simple "on error next" type logic for that specific object in the foreach but not the rest. Thanks in advance for the help/advice.
View 4 Replies
View Related
Sep 11, 2007
I am trying to execute a SP like below in OLEDB source in data flow... and this statement include the insert stament ( row by row transaction).. I would like to creat an error hadling logic so that if the trasaction fail to insert the row then ignore that particular row then, move to the next row without stopping the whole process.. how can i do this?
exec usp_Inert_Registration_Episodes_Assessments
@Unique_ID=?,
@Gender_Cd=?,
@Birth_Date=?,
@Race_Ind=?,
@Ethnicity_Cd=?,
@Registration_Dt=? ,
--
--@Object_Key
View 16 Replies
View Related
Mar 26, 2008
Hi,
I'm trying to copy and paste an 'Execute SQL Tasks' within one of my packages.
I've managed to solve the copy part of the problem by registering the following dlls:
regsvr32.exe msxml3.dll
regsvr32.exe msxml6.dll
However, I can't paste the copied task onto my control flow. When I paste I get the following error:
The designer could not paste one or more executables.
Additional information:
At least one executable could not be pasted correctly.
the executable with the name 'Record Row Count' could not be pasted successfully.
Information about the state of the executable with the name
'Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.ExecuteSQLTask, Microsoft.SqlServer.SQLTask,
Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' could not be loaded from the clipboard.
Exception from HRESULT: 0xC0010028 (Microsoft.DataTransformationServices.Design)
Any help getting this fixed would be appreciated.
Tom
View 5 Replies
View Related
