My client has received errors 1608 and 17824 from the SQL Server 6.5 server
recently. I am looking for a more definitive answer as to what the error
means and how do we correct the problem. I understand that there may be a
network problem but where do I start looking?
Had to rebuild SQL server and restored SMS databases ok. But the following msgs have appeared - any clues. All help appreciated.
99/08/16 16:38:30.75 ods Error : 17824, Severity: 10, State: 0 99/08/16 16:38:30.75 ods Unable to write to ListenOn connection '.pipesqlquery', loginname 'sa', hostname ''. 99/08/16 16:38:30.75 ods OS Error : 232, The pipe is being closed. 99/08/16 16:38:30.77 spid16 Error : 1608, Severity: 21, State: 2 99/08/16 16:38:30.77 spid16 A network error was encountered while sending results to the front end. Check the SQL Server errorlog for more information.
I have set-up a Scheduled Tasks (daily) to do some copying record. The Scheduled Task will send a Notifications to a "Email Operator" On Success and On Failure. The Scheduled Task is working fine on the first few day. But it is now keep having the below error.
Error : 17824, Severity: 10, State: 0 Unable to write to ListenOn connection '.pipesqlquery', loginname 'sa', hostname ''. OS Error : 232, The pipe is being closed.
Error : 1608, Severity: 21, State: 2 A network error was encountered while sending results to the front end. Check the SQL Server errorlog for more information.
But the copying is successfully done. It just can't send the Mail to the "Email Operator".
Do someone know why?
[I have try to re-start the SQL server. TheMail will not send after a few day of working fine.]
DESCRIPTION:Error : 1608, Severity: 21, State: 2 A network error was encountered while sending results to the front end. Check the SQL Server errorlog for more information.
Hi, I have a Visual C app that has been running for about 7mos with SQL Server. Five workstations are accessing the database and they all have licenses. Today one of the machines stated getting a file buffer read error when they tried to add a record to a specific table in the database. When I checked the SQL Error Log this is what I found
Error 17824 Severity 10 State: 0 Unable to write to ListenOn connection `pipesqlquery`, loginname `Eagle`, hostname `Dispatch_1`
OS Error: 109 the pipe has been ended.
All the other workstations are still operating normally...only this one generates the error. Does anyone have any idea of what could be causing this?
I just started receiving the following error on 12/21. Any idea what it is caused by?
Error: 17824, Severity:10, State:0 Unable to write to Listenon Connection '1433', Loginname 'Toni', hostname''. OS Error:64, The specified network name is no longer available. Error: 1608, Severity:21, State:2 A network error was encountered while sending results to the front end. Check the SQL Server Errorlog for more information.
DECLARE @DTstart SMALLDATETIME, @DTend SMALLDATETIME SELECT @DTstart = "980801", @DTend = "980810" SELECT ' processing from ', @DTstart , ' to' , @DTend SELECT GETDATE(), 'start LOOP' DO WHILE @DTstart <= @DTend BEGIN exec p_pmp_charg_unif_csg @DTstart WAITFOR DELAY "00:01:00" SELECT @DTstart = DATEADD(DAY,1,@DTstart ) END SELECT GETDATE(), 'start LOOP'
I´m having the following problem with SQL 7. When running the loop, all in a sudden it stops - there´s no error message on result. But checking out the current error log, I´ve found the error 17824 reported .
According to the BOL, this error is related to 'priority boost' and troubles in connection between server and client.
This SQL server 7 has the following configuration:
- 128Mb of RAM, and SQL7 can use from 0 to 128MB - boost SQL Server priority on Windows NT - maximum concurrent user connection is 0
Is there someone that had similar problem in SQL 7?
I recently updated the datatype of a sproc parameter from bit to tinyint. When I executed the sproc with the updated parameters the sproc appeared to succeed and returned "1 row(s) affected" in the console. However, the update triggered by the sproc did not actually work.
The table column was a bit which only allows 0 or 1 and the sproc was passing a value of 2 so the table was rejecting this value. However, the sproc did not return an error and appeared to return success. So is there a way to configure the database or sproc to return an error message when this type of error occurs?
I have a parent package that calls child packages inside a For Each container. When I debug/run the parent package (from VS), I get the following error message: Warning: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
It appears to be failing while executing the child package. However, the logs (via the "progress" tab) for both the parent package and the child package show no errors other than the one listed above (and that shows in the parent package log). The child package appears to validate completely without error (all components are green and no error messages in the log). I turned on SSIS logging to a text file and see nothing in there either.
If I bump up the MaximumErrorCount in the parent package and in the Execute Package Task that calls the child package to 4 (to go one above the error count indicated in the message above), the whole thing executes sucessfully. I don't want to leave the Max Error Count set like this. Is there something I am missing? For example are there errors that do not get logged by default? I get some warnings, do a certain number of warnings equal an error?
Starwin writes "when i execute DBCC CHECKDB, DBCC CHECKCATALOG I reveived the following error. how to solve it?
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -2093955965, index ID 711, page ID (3:2530). The PageId in the page header = (34443:343146507). . . . . . . . .
CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1635188736)' (object ID -1635188736). CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1600811521)' (object ID -1600811521).
. . . . . . . .
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -8748568, index ID 50307, page ID (3:2497). The PageId in the page header = (26707:762626875). Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -7615284, index ID 35836, page ID (3:2534). The PageId in the page heade"
I have been receiving 644 errors on an index for one of my tables. We have dropped and rebuilt the index. Even BCP out, drop the table, create the table and BCP in everything and still have problems.
Has anyone else experienced problems with 644 errors? Did you ever determine the cause and are they any preventative ideas?
Ok, whenever I try to connect, I get the following Error messages:
"SQL Server Registration failed because of the connection failure displayed below. SQL Server does not exist or access denied. ConnectionOpen (Connect())"
"An Error 1069 occured while performing this service operation on the MSSQLServer Service"
I even went as far as uninstalling and reinstalling, but to no avail. Does anyone have an idea what's causing this? It was working fine and then all the sudden one day I start getting these messages and it won't work.
I have a dynamics db that is used for archival purposes and it is not used very often. Now that someone decided to get some info out of it it wont let them. when I run dbcc I get the following message:
Msg 5242, Level 16, State 1, Line 1 An inconsistency was detected during an internal operation in database 'PACIF'(ID:12) on page (1:19451). Please contact technical support. Reference number 6. Msg 8921, Level 16, State 1, Line 1 Check terminated. A failure was detected while collecting facts. Possibly tempdb out of space or a system table is inconsistent. Check previous errors.
I was just wondering if this meant anything to any of you? and since all of my backtapes have the same issue, is there any way to fix it?
Running SQL 05 Standard on a Vista box and I have about had it with Vista. Anytime I try to launch Config Manager I get Cannot connect to WMI provider. You do not have permission or the server is unreachable. So try I googled and tried everything I can fine from http://blogs.msdn.com/echarran/archive/2006/01/03/509061.aspx
C:Program FilesMicrosoft SQL Server90Shared>mofcomp "C:Program FilesMicrosoft SQL Server90Sharedsqlmgmproviderxpsp2up.mof" and now I get ..
An error occurred while processing item 10 defined on lines 73 - 79 in file C:s
qlmgmproviderxpsp2up.mof:
Error Number: 0x80041003, Facility: WMI
Description: Access denied
Compiler returned error 0x80041001
so I try every possible different permission setting for anything sql server - problem still happening... try procmonitor.. find the registry keys and grant full contorl to all of them.. problem still happending.. run the little fixwmi.cmd I found.. problem still happening..
try to uninstall SQL Server.. NOT - WMI error - try to reinstall over--- NOT WMI error.
What do I need to do to get this working. .this is becoming a serious hinderance to my productivity!!!
what a want to know is if there s a way to log sql server errors on a log file, table, these errors are not sql server logs which already exists, i want to log dead locks, sql server timeout errors vs on sql server or somewhere.
Hi Expert, I have a datagrid which is filtering by a dropdownlist and a search textbox.
The dropdownlist allows to select the column they want to search. The search textbox allows to enter the item they want based on the selection from dropdown. Now I use a StoreProcedure to select the data they need, so I pass-in @DropDownListValue int and some others parameters, such as @ID int, @OrderType varchar(50) ... When I search for ID = 163 Input string was not in a correct format. Then when I check with the SQL Server Profiler, I found out that: exec usp_SelectOrder@DropDownListValue=N'1',@ID=N'163',@OrderType=N'163',@OrderSeries=N'163' ... I already set every parameter's default value to NULL. How can I solve for this? Thanks!!
Why on earth is this not working, It WILL insert if there are NO apostheres (" ' "), but if I say like, "Cedric's Group" It will error out. I thought this approach was suppose to handle this character? Thanks for any insight, String sqlStr = "Insert into cardgroups (username,groupname,insertdt,groupid) values (@username,@groupname,@insertdt,@groupid)";
Imports System.Data.SqlClientImports System.DataImports Microsoft.SqlServerPartial Class _Default Inherits System.Web.UI.Page Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click End Sub Protected Sub TextBox3_TextChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles TextBox3.TextChanged End Sub Protected Sub SqlDataSource1_Selecting(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.SqlDataSourceSelectingEventArgs) Handles SqlDataSource1.Selecting End Sub Protected Sub Save_Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Save_Button1.Click Dim conn As New SqlConnection() conn.ConnectionString = Data Source=REDSTONE;Persist Security Info=True;User ID=******;Password=******;Unicode=True End SubEnd Class
End of statement expected. C:Documents and SettingskasireddyMy DocumentsVisual Studio 2005WebSitesBankCustomerInfo.aspx.vb 'System.Data' is a namespace and cannot be used as an expression. C:Documents and SettingskasireddyMy DocumentsVisual Studio 2005WebSitesBankCustomerInfo.aspx.vb C:Documents and SettingskasireddyMy DocumentsVisual Studio 2005WebSitesBankCustomerInfo.aspx.vb
Hello to all, On my webPage I have Used one SQLDataSource to access DataBase. Now whenever some error occures it shows error page by default. I am not able to catch Errors and tackle in my way... Furthermore in this new structure of accessing DataBase even I do not know where to write Try... Catch...
Well there's always a first for everything!! I have a SQL 7.0 server on sP1 and ran upgrade to sp3 and recieved error 'error in upgrade script' retry or cancel. When I retried the upgrade ended. I tried to run the upgrade again and it tries continue where it ended before, but the upgrade ends unsucessfully. I even tried extracted the sp3 exe to a diffrent folder and ran the sp3 upgrade with same results.
I started the MSSQL service ok but not able to use Query Analyzer, DTS, EM.
Get the following message:ISQL.EXE - Entry Point not found. The procedure entry point?DeleteRow@CDataCTLStorage@@UAEJJPAPAG@Z could not be located in the dynamic link library SQLGUI.dll
I get similar msgs when trying to open DTS, Enterprise manager from the server. The user databases and appear to be ok. I am able to get to Query Analyzer, etc. from my worksation fine.
Has anyone encountered this before? Is there a fix for it or do I need to rebuild the server from SP1 and restore the databases, etc.??
It gives following errors 1.time out 2.general network failure
* Are these due to large number of online connnections *If so what is the maximum number of connections possible *what is the hardware requirement to avoid this *what is the impact on stored procedures *How to tune the server to overcome the problems *I'm currently using the standard edition what is the impact on enterprise edition
Over the last few weeks we've been having problems with a particular table in our live OLTP database - dbcc checkdb has been reporting consistency errors.
Initially i took the db offline and fixed the errors using checkdb and replacing the deleted records from a backup of the table. After some investigation it appeared that the errors were being caused when the unique clustered index on the table was rebuilt during weekend maintenance. After a lot of testing i was sure this was the case - so i just deleted the index (the table is small and was over-indexed anyway) and the errors stopped occurring. I didn't understand why the errors had occurred in the first place, and i wasn't convinced that the index was the real problem, but the errors had gone - so that was ok for the short term.
A few things still bugged me:
1. For audit purposes we maintain a copy of the table in question (populated via triggers on the live table) and this showed up consistency errors too. This led me to suspect the problem was with the data itself or the structure of the table - unfortunately there's nothing remarkable about this small, rarely updated table at all (apart from the fact that it's vital for our business!).
2. Any database built from backups of the live db consistently report errors now despite the fact that the backups were made after the problem was resolved and when dbcc checkdb reported NO errors (I maintain a number of test and olap databases in this way). What's happening here? (My guess is that the backup and restore process involves rebuilding indexes, rearranging data, etc. and this is resurrecting the problem) I couldn't help feeling that despite having apparently fixed the errors they were still lurking out there somewhere....
3. At no point did the data in the table appear to be corrupt in any way from the user perspective. This provokes two questions - is dbcc checkdb reliable at both reporting and fixing errors, and how serious are consistency errors?
After removing the suspect index everything was fine for a few weeks until this morning - when errors were again reported on the same table. After hours spent testing and playing around with this (dropping indexes, dropping or truncating the table and re-populating from ascii files, etc.) i've now hit a brick wall. I still suspect the problem is related to the data itself or the structure of the table but can't get any further.....so..
Has anyone come up against a similar problem? Any suggestions for the next course of action? Can anyone point me to documentation on checkdb or consistency errors (other than what's in BOL or the MS knowledge base)?
I am getting the error: The Procedure entry point snmpsvcgetenterpriseoid could not be located in the dynamic link library snmpapi.dll at start up of my nt4 sql server box. The only thought to that is that I need to reinstall SNMP. But I cant find the SNMP Agent anyware for me to reinstall. If you have ever seen this and have a better idea of how to fix it or if you know were i can find the agent it would be gretly apreciated.
I have tried to make a DTS task running a batc-file on the same server as the SQL program is running using the CmdExec command.
My Command is as follows:
CmdExec serverpathatchname.bat
The problem is that everytime the step runs it report the following error:
"The system cannot find the file specified."
In the bat file I am also trying the de-map/map a network drive with another loginname/password than the one used on the SQL-server -> is this i problem?
Hope to hear from you soon, this is a bit urgent!!
Please provide tips to this adresse: qtip@bigfoot.com
I'm running SQL 7.0 with SP2 applied. I have a database that I'm trying to replicate over the Internet.
I'm having a problem getting the initial snapshot. The total amount of data in the snapshot is 3GB. One .bcp file is 2GB and another is roughly 900MB. There are also a few smaller files.
I have my publisher and distributor setup correctly as well as my subscription. I have tested with smaller datasets. Near as I can tell, there is a problem with my files being too big. I get all the .sch files. The first .bcp file is the 2GB file.
I have tried replicating to another server on my LAN (100base-T) and get the same error.
I don't have the exact error, but it's something like: 'Failed to get file sql01_data1_data120000601105138igfile.bcp'
In my FTP Log, I see that transfer was started then aborted.
Any help on how to deliver large amounts of data over FTP would be greatly appreciated.
I have the following severity errors 19-25. I am a new using to SQL Server 7.0 and would like some advice in dealing with these errors. I am going to run the DBCC CHECKDB to determine what the errors are. Is this the right approach. Thanks!!!
I thought this SP would return 547(foreign key constraint voilation) when column 'thing' was being referenced in another table. Instead, when the front-end application code calls this SP it gets a 1 from the delete statement itself. In other words, my return statement never seems to get executed. Is there any way of achieving this? In other words, I want to trap the error 547 and return that to the front-end.