/*************************************************************************************
Description: This store procedure is used to return the district's Rubric Report.
Returns:
RubricReport.ReportID
RubricReport.LastUpdate
RubricReport.LastUpdateBy
RubricReportDetail.LocalPerf
RubricReportDetail.GoalMet
RubricReportTemplate.IndicatorNumber
RubricReportTemplate.Topic
RubricReportTemplate.Part
RubricReportTemplate.ILCDComponent
SppTarget.Target
Parameters:
@DataYears
@County
@District
@LastUpdateBy
*/
ALTER PROCEDURE [dbo].[usp_RubricReportGet]
-- Add the parameters for the stored procedure here
@DataYears CHAR(8),
@County CHAR(2),
@District CHAR(4),
@LastUpdateby VARCHAR(50),
@ReportID INT,
@LastUpdate SMALLDATETIME,
@IndicatorID TINYINT,
@IndicatorNumber VARCHAR(5),
@Number VARCHAR(20),
@FYY CHAR(9),
@Part CHAR(1),
@Years CHAR(8),
@maxLastUpdate SMALLDATETIME,
@LocalPerf DECIMAL(5,4),
@GoalMet BIT,
@Topic VARCHAR(100),
@ILCDComponent VARCHAR(50)
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
SET NOCOUNT ON;
-- Get the ReportID and LastUpdate values from Rubric Report Table matching
-- County=@County and District=@District
SELECT ReportID, LastUpdate
FROM RubricReport
WHERE (RubricReport.County = @County) AND (RubricReport.District = @District) AND (RubricReport.DataYears = @DataYears)
-- With table SPPIndicator and SppIndicator11Data, find the maximum value of LastUpdate (@maxLastUpdate)
SELECT @maxLastUpdate FROM (SELECT LastUpdate FROM SPPIndicator UNION ALL SELECT LastUpdate FROM SppIndicator11) AS D
IF @maxLastUpdate > (SELECT LastUpdate FROM RubricReport WHERE (RubricReport.County = @County) AND (RubricReport.District = @District) AND (RubricReport.DataYears = @DataYears))
BEGIN
EXEC usp_RubricReportCalc @DataYears, @County, @District, @LastUpdateBy
END
ELSE
SELECT ReportID, LastUpdate, LastUpdateBy
FROM RubricReport
WHERE RubricReport.ReportID = RubricReportDetail.ReportID
SELECT IndicatorNumber, Topic, Part, ILCDComponent
FROM RubricReportTemplate
WHERE RubricReportDetail.IndicatorID = RubricReportTemplate.IndicatorID
SELECT LocalPerf, GoalMet
FROM RubricReportDetail
WHERE SppTarget.IndicatorNumber = RubricReportDetail.IndicatorID
SELECT Target
FROM SppTarget
WHERE SppTarget.Years = @DataYears
END
I have the above created stored proc. which gives the following errors:
Msg 107, Level 16, State 3, Procedure usp_RubricReportGet, Line 69
The column prefix 'RubricReportDetail' does not match with a table name or alias name used in the query.
Msg 107, Level 16, State 3, Procedure usp_RubricReportGet, Line 73
The column prefix 'RubricReportDetail' does not match with a table name or alias name used in the query.
Msg 107, Level 16, State 3, Procedure usp_RubricReportGet, Line 78
The column prefix 'SppTarget' does not match with a table name or alias name used in the query.
I have a form that is being used by a user, and the form is writing to an sql database, but it gets the "string or binary data would be truncated, the statement has been terminated" error. I realize that this is due to the fact that he filled out a an entry where the respective column length was shorter than what he put in...
I am curious as to how you account for this? What is the industry practice? Is it better to truncate? Make the database columns a huge size? Put in validators for every single control to make sure that the space is an acceptable length? How do you guys account for things that might go wrong when writing to SQL?
Try, Get's?
I am confused as to how to even approach this sort of thing...
I'm pretty new to SQL and I'm having trouble with a function, probably just syntax. I'm trying to consolidate several rows of data into a single row text field. The calling program can use views but not functions so I need to get a table into a view with the consolidated lines.
Also, I would think this could be consolidated to a single view that calls one function. Is that possible, how would I do it?
Thanks for any help, Steve
VIEW WHERE DATA COMES FROM: CUST_ORDER_ID | LINE_TEXT number1 | first line item text number1 | Second line item text number1 | Third line item text number2 | first line item text number2 | Second line item text ...
VIEW I WANT: CUST_ORDER_ID | CO_LINES_TEXT number1 | Second line item text 'crlf' Third Line item text number2 | Second line item text
FUNCTION CODE: This is the function code with errors
CREATE FUNCTION dbo.tvf_NC_CO_LINES_TEXT (@ORDER_ID VARCHAR(20))
RETURNS @NC_CO_LINES TABLE ( CUST_ORDER_ID VARCHAR(20) PRIMARY KEY NOT NULL, CO_LINES_TEXT VARCHAR(1000) NULL ) AS BEGIN DECLARE @COLinesString VARCHAR(1000); SET @ORDER_ID = CUST_ORDER_ID; SELECT @COLinesString = COALESCE(@COLinesString + Char(13) + Char(10), '') + LINE_STRING FROM NC_CO_LINES_STRING WHERE NC_CO_LINES_STRING.CUST_ORDER_ID = @ORDER_ID SET @COLinesString = CO_LINES_TEXT RETURN END;
GO
ERROR MESSAGES: Msg 207, Level 16, State 1, Procedure tvf_NC_CO_LINES_TEXT, Line 16 Invalid column name 'CUST_ORDER_ID'. Msg 207, Level 16, State 1, Procedure tvf_NC_CO_LINES_TEXT, Line 20 Invalid column name 'CO_LINES_TEXT'.
VIEW CODE: SELECT dbo.CUST_ORDER_LINE.CUST_ORDER_ID, CAST(CAST(dbo.CUST_ORDER_LINE.ORDER_QTY AS INT) AS VARCHAR(2)) + ' ' + dbo.CUST_ORDER_LINE.PART_ID + ' ' + dbo.PART.DESCRIPTION AS LINE_STRING FROM dbo.CUST_ORDER_LINE INNER JOIN dbo.PART ON dbo.CUST_ORDER_LINE.PART_ID = dbo.PART.ID WHERE (dbo.CUST_ORDER_LINE.LINE_NO > 1)
I am importing some data from my IBM DB2 Z/OS mainframe to SQL Server 2005 using the SSIS import wizard. The wizard automatically converted the DB2 string data before trying to store it to SQL Server. The code page that the wizard chose to do its conversion is the 1252 Ansi Latin. However, I am getting the following error on the address field...."one or more characters had no match in the target code page". Can someone suggest another code page? ASCII? IBM 37?
Hi All, we have a set of packages which has to to be implemented across differnet environments. the packages invariable uses OLEDB Source/Destination Components. In these two components the Code Page Property is not Configurable. so if the package has to be Deployed in a different environment than,where it is Developed it gives a Validation Error. Is there a Workaround for this problem. if anybody have faced the problem earlier,please post it. thanks in advance. cheers srikanth
I created some custom code that will check to see if a file exists on a Windows Share.
Code Snippet Public Function FileExists(ByVal FileFullPath As String) As Boolean Try Dim f As New System.IO.FileInfo(FileFullPath) Return f.Exists Catch e As Exception Return e.Description End Try End Function
Code SnippetSystem.Security.SecurityException: Request for the permission of type 'System.Security.Permissions.FileIOPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed. at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet) at System.Security.CodeAccessPermission.Demand() at System.IO.FileInfo..ctor(String fileName) at ReportExprHostImpl.CustomCodeProxy.FileExists(String FileFullPath) The action that failed was: Demand The type of the first permission that failed was: System.Security.Permissions.FileIOPermission The Zone of the assembly that failed was: MyComputer
Hi all, if have problem to display error message in vb.net that comes from a stored procedure. IF ...... then msgbox "ERROR at Update" returnvalue = SUCCES ELSE Msgbox "Successfull Updated" returnvalue = ERROREND IFHow can I return values from Stored Procedure to VB.NET and then give to User a Message that the Update was successful or not.Thanks to all
"Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed."
so I tried doing the following
SqlClientPermission pSql = new SqlClientPermission(System.Security.Permissions.PermissionState.Unrestricted);
pSql.Assert();
and then I get this error
"Request for the permission of type 'System.Security.Permissions.SecurityPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed."
I recently updated the datatype of a sproc parameter from bit to tinyint. When I executed the sproc with the updated parameters the sproc appeared to succeed and returned "1 row(s) affected" in the console. However, the update triggered by the sproc did not actually work.
The table column was a bit which only allows 0 or 1 and the sproc was passing a value of 2 so the table was rejecting this value. However, the sproc did not return an error and appeared to return success. So is there a way to configure the database or sproc to return an error message when this type of error occurs?
I have a parent package that calls child packages inside a For Each container. When I debug/run the parent package (from VS), I get the following error message: Warning: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
It appears to be failing while executing the child package. However, the logs (via the "progress" tab) for both the parent package and the child package show no errors other than the one listed above (and that shows in the parent package log). The child package appears to validate completely without error (all components are green and no error messages in the log). I turned on SSIS logging to a text file and see nothing in there either.
If I bump up the MaximumErrorCount in the parent package and in the Execute Package Task that calls the child package to 4 (to go one above the error count indicated in the message above), the whole thing executes sucessfully. I don't want to leave the Max Error Count set like this. Is there something I am missing? For example are there errors that do not get logged by default? I get some warnings, do a certain number of warnings equal an error?
Starwin writes "when i execute DBCC CHECKDB, DBCC CHECKCATALOG I reveived the following error. how to solve it?
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -2093955965, index ID 711, page ID (3:2530). The PageId in the page header = (34443:343146507). . . . . . . . .
CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1635188736)' (object ID -1635188736). CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1600811521)' (object ID -1600811521).
. . . . . . . .
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -8748568, index ID 50307, page ID (3:2497). The PageId in the page header = (26707:762626875). Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -7615284, index ID 35836, page ID (3:2534). The PageId in the page heade"
Hi all--I'm trying to convert a function which I inherited from a SQL Server 2000 DTS package to something usable in an SSIS package in SQL Server 2005. Given the original code here: Function Main() on error resume next dim cn, i, rs, sSQL Set cn = CreateObject("ADODB.Connection") cn.Open "Provider=sqloledb;Server=<server_name>;Database=<db_name>;User ID=<sysadmin_user>;Password=<password>" set rs = CreateObject("ADODB.Recordset") set rs = DTSGlobalVariables("SQLstring").value
for i = 1 to rs.RecordCount sSQL = rs.Fields(0).value cn.Execute sSQL, , 128 'adExecuteNoRecords option for faster execution rs.MoveNext Next
Main = DTSTaskExecResult_Success
End Function
This code was originally programmed in the SQL Server ActiveX Task type in a DTS package designed to take an open-ended number of SQL statements generated by another task as input, then execute each SQL statement sequentially. Upon this code's success, move on to the next step. (Of course, there was no additional documentation with this code. :-)
Based on other postings, I attempted to push this code into a Visual Studio BI 2005 Script Task with the following change:
public Sub Main()
...
Dts.TaskResult = Dts.Results.Success
End Class
I get the following error when I attempt to compile this:
Error 30209: Option Strict On requires all variable declarations to have an 'As' clause.
I am new to Visual Basic, so I'm on a learning curve here. From what I know of this script: - The variables here violate the new Option Strict On requirement in VS 2005 to declare what type of object your variable is supposed to use.
- I need to explicitly declare each object, unless I turn off the Option Strict On (which didn't seem recommended, based on what I read).
Given this statement:
dim cn, i, rs, sSQL
I'm looking at "i" as type Integer; rs and sSQL are open-ended arrays, but can't quite figure out how to read the code here:
This code seems to create an instance of a COM component, then pass provider information and create the recordset being passed in by the previous task, but am not sure whether this syntax is correct for VS 2005 or what data type declaration to make here. Any ideas/help on how to rewrite this code would be greatly appreciated!
Table 1: AddressBook Fields --> User Name, Address, CountryCode
Table 2: Country Fields --> Country Code, Country Name
Step 1 : I have created a Cube with these two tables using SSAS.
Step 2 : I have created a report in SSRS showing Address list.
The Column in the report are User Name, Address, Country Name
But I have no idea, how to convert this Country Code to Country name.
I am generating the report using the Layout tab. ( Data | Layout | Preview ) Report1.rdl [Design]
Anyone help me to solve this issue. Because, in our project most of the transaction tables have Code and Code description in master table. I need to convert all code into corresponding description in all my reports.
Hello, I'm using ASP.Net to update a table which include a lot of fields may be around 30 fields, I used stored procedure to update these fields. Unfortunatily I had to use a FormView to handle some TextBoxes and RadioButtonLists which are about 30 web controls. I 've built and tested my stored procedure, and it worked successfully thru the SQL Builder.The problem I faced that I have to define the variable in the stored procedure and define it again the code behind againALTER PROCEDURE dbo.UpdateItems ( @eName nvarchar, @ePRN nvarchar, @cID nvarchar, @eCC nvarchar,@sDate nvarchar,@eLOC nvarchar, @eTEL nvarchar, @ePhone nvarchar, @eMobile nvarchar, @q1 bit, @inMDDmn nvarchar, @inMDDyr nvarchar, @inMDDRetIns nvarchar, @outMDDmn nvarchar, @outMDDyr nvarchar, @outMDDRetIns nvarchar, @insNo nvarchar,@q2 bit, @qper2 nvarchar, @qplc2 nvarchar, @q3 bit, @qper3 nvarchar, @qplc3 nvarchar, @q4 bit, @qper4 nvarchar, @pic1 nvarchar, @pic2 nvarchar, @pic3 nvarchar, @esigdt nvarchar, @CCHName nvarchar, @CCHTitle nvarchar, @CCHsigdt nvarchar, @username nvarchar, @levent nvarchar, @eventdate nvarchar, @eventtime nvarchar ) AS UPDATE iTrnsSET eName = @eName, cID = @cID, eCC = @eCC, sDate = @sDate, eLOC = @eLOC, eTel = @eTEL, ePhone = @ePhone, eMobile = @eMobile, q1 = @q1, inMDDmn = @inMDDmn, inMDDyr = @inMDDyr, inMDDRetIns = @inMDDRetIns, outMDDmn = @outMDDmn, outMDDyr = @outMDDyr, outMDDRetIns = @outMDDRetIns, insNo = @insNo, q2 = @q2, qper2 = @qper2, qplc2 = @qplc2, q3 = @q3, qper3 = @qper3, qplc3 = @qplc3, q4 = @q4, qper4 = @qper4, pic1 = @pic1, pic2 = @pic2, pic3 = @pic3, esigdt = @esigdt, CCHName = @CCHName, CCHTitle = @CCHTitle, CCHsigdt = @CCHsigdt, username = @username, levent = @levent, eventdate = @eventdate, eventtime = @eventtime WHERE (ePRN = @ePRN) and the code behind which i have to write will be something like thiscmd.CommandType = CommandType.StoredProcedure; cmd.Parameters.AddWithValue("@eName", ((TextBox)FormView1.FindControl("TextBox1")).Text);cmd.Parameters.AddWithValue("@ePRN", ((TextBox)FormView1.FindControl("TextBox2")).Text); cmd.Parameters.AddWithValue("@cID", ((TextBox)FormView1.FindControl("TextBox3")).Text);cmd.Parameters.AddWithValue("@eCC", ((TextBox)FormView1.FindControl("TextBox4")).Text); ((TextBox)FormView1.FindControl("TextBox7")).Text = ((TextBox)FormView1.FindControl("TextBox7")).Text + ((TextBox)FormView1.FindControl("TextBox6")).Text + ((TextBox)FormView1.FindControl("TextBox5")).Text;cmd.Parameters.AddWithValue("@sDate", ((TextBox)FormView1.FindControl("TextBox7")).Text); cmd.Parameters.AddWithValue("@eLOC", ((TextBox)FormView1.FindControl("TextBox8")).Text);cmd.Parameters.AddWithValue("@eTel", ((TextBox)FormView1.FindControl("TextBox9")).Text); cmd.Parameters.AddWithValue("@ePhone", ((TextBox)FormView1.FindControl("TextBox10")).Text); cmd.Parameters.AddWithValue("@eMobile", ((TextBox)FormView1.FindControl("TextBox11")).Text); So is there any way to do it better than this way ?? Thank you
Hi,I need some help here. I have a SELECT sql statement that will query the table. How do I get the return value from the sql statement to be assigned to a label. Any article talk about this? Thanks geniuses.
My service broker is working with 2 different instances in local server.But could not able to get working on 2 different servers because of Conversation ID cannot be associated with an active conversation error which I have posted.
After I receive the message successfully...in the end I get this message sent...
Recently in an SSIS package I am getting the following error for a particular Data flow task.
Error: 2008-01-25 12:01:48.58
Code: 0xC0202009
Source: Import Datasynapse Data User Events Source [3017]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
End Error
Error: 2008-01-25 12:01:48.73
Code: 0xC004701A
Source: Import Datasynapse Data DTS.Pipeline
Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009.
End Error
Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error?
Since this is very urgent, immediate response would be very much appreciated.
I have been receiving 644 errors on an index for one of my tables. We have dropped and rebuilt the index. Even BCP out, drop the table, create the table and BCP in everything and still have problems.
Has anyone else experienced problems with 644 errors? Did you ever determine the cause and are they any preventative ideas?
Ok, whenever I try to connect, I get the following Error messages:
"SQL Server Registration failed because of the connection failure displayed below. SQL Server does not exist or access denied. ConnectionOpen (Connect())"
"An Error 1069 occured while performing this service operation on the MSSQLServer Service"
I even went as far as uninstalling and reinstalling, but to no avail. Does anyone have an idea what's causing this? It was working fine and then all the sudden one day I start getting these messages and it won't work.
I have a dynamics db that is used for archival purposes and it is not used very often. Now that someone decided to get some info out of it it wont let them. when I run dbcc I get the following message:
Msg 5242, Level 16, State 1, Line 1 An inconsistency was detected during an internal operation in database 'PACIF'(ID:12) on page (1:19451). Please contact technical support. Reference number 6. Msg 8921, Level 16, State 1, Line 1 Check terminated. A failure was detected while collecting facts. Possibly tempdb out of space or a system table is inconsistent. Check previous errors.
I was just wondering if this meant anything to any of you? and since all of my backtapes have the same issue, is there any way to fix it?
Running SQL 05 Standard on a Vista box and I have about had it with Vista. Anytime I try to launch Config Manager I get Cannot connect to WMI provider. You do not have permission or the server is unreachable. So try I googled and tried everything I can fine from http://blogs.msdn.com/echarran/archive/2006/01/03/509061.aspx
C:Program FilesMicrosoft SQL Server90Shared>mofcomp "C:Program FilesMicrosoft SQL Server90Sharedsqlmgmproviderxpsp2up.mof" and now I get ..
An error occurred while processing item 10 defined on lines 73 - 79 in file C:s
qlmgmproviderxpsp2up.mof:
Error Number: 0x80041003, Facility: WMI
Description: Access denied
Compiler returned error 0x80041001
so I try every possible different permission setting for anything sql server - problem still happening... try procmonitor.. find the registry keys and grant full contorl to all of them.. problem still happending.. run the little fixwmi.cmd I found.. problem still happening..
try to uninstall SQL Server.. NOT - WMI error - try to reinstall over--- NOT WMI error.
What do I need to do to get this working. .this is becoming a serious hinderance to my productivity!!!
what a want to know is if there s a way to log sql server errors on a log file, table, these errors are not sql server logs which already exists, i want to log dead locks, sql server timeout errors vs on sql server or somewhere.
Hi Expert, I have a datagrid which is filtering by a dropdownlist and a search textbox.
The dropdownlist allows to select the column they want to search. The search textbox allows to enter the item they want based on the selection from dropdown. Now I use a StoreProcedure to select the data they need, so I pass-in @DropDownListValue int and some others parameters, such as @ID int, @OrderType varchar(50) ... When I search for ID = 163 Input string was not in a correct format. Then when I check with the SQL Server Profiler, I found out that: exec usp_SelectOrder@DropDownListValue=N'1',@ID=N'163',@OrderType=N'163',@OrderSeries=N'163' ... I already set every parameter's default value to NULL. How can I solve for this? Thanks!!
Why on earth is this not working, It WILL insert if there are NO apostheres (" ' "), but if I say like, "Cedric's Group" It will error out. I thought this approach was suppose to handle this character? Thanks for any insight, String sqlStr = "Insert into cardgroups (username,groupname,insertdt,groupid) values (@username,@groupname,@insertdt,@groupid)";
Imports System.Data.SqlClientImports System.DataImports Microsoft.SqlServerPartial Class _Default Inherits System.Web.UI.Page Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click End Sub Protected Sub TextBox3_TextChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles TextBox3.TextChanged End Sub Protected Sub SqlDataSource1_Selecting(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.SqlDataSourceSelectingEventArgs) Handles SqlDataSource1.Selecting End Sub Protected Sub Save_Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Save_Button1.Click Dim conn As New SqlConnection() conn.ConnectionString = Data Source=REDSTONE;Persist Security Info=True;User ID=******;Password=******;Unicode=True End SubEnd Class
End of statement expected. C:Documents and SettingskasireddyMy DocumentsVisual Studio 2005WebSitesBankCustomerInfo.aspx.vb 'System.Data' is a namespace and cannot be used as an expression. C:Documents and SettingskasireddyMy DocumentsVisual Studio 2005WebSitesBankCustomerInfo.aspx.vb C:Documents and SettingskasireddyMy DocumentsVisual Studio 2005WebSitesBankCustomerInfo.aspx.vb
Hello to all, On my webPage I have Used one SQLDataSource to access DataBase. Now whenever some error occures it shows error page by default. I am not able to catch Errors and tackle in my way... Furthermore in this new structure of accessing DataBase even I do not know where to write Try... Catch...
Well there's always a first for everything!! I have a SQL 7.0 server on sP1 and ran upgrade to sp3 and recieved error 'error in upgrade script' retry or cancel. When I retried the upgrade ended. I tried to run the upgrade again and it tries continue where it ended before, but the upgrade ends unsucessfully. I even tried extracted the sp3 exe to a diffrent folder and ran the sp3 upgrade with same results.
I started the MSSQL service ok but not able to use Query Analyzer, DTS, EM.
Get the following message:ISQL.EXE - Entry Point not found. The procedure entry point?DeleteRow@CDataCTLStorage@@UAEJJPAPAG@Z could not be located in the dynamic link library SQLGUI.dll
I get similar msgs when trying to open DTS, Enterprise manager from the server. The user databases and appear to be ok. I am able to get to Query Analyzer, etc. from my worksation fine.
Has anyone encountered this before? Is there a fix for it or do I need to rebuild the server from SP1 and restore the databases, etc.??