I'm trying to restore a db from backup using SQL 6.5. The new db (created using sql statements not enterprise manager) and backup reside on 1 server.I get one of 2 errors.Either error msg #10025[possible network error.Write to SQL server failed.Invalid connection] are encountered when trying to do the restore or the database "loads" forever and then error #603(There are not enough system session descriptors available to run this query. The maximum number available to a process is %d. Split query and rerun.) is encounterd. Please help.
A client recently changed his sort order and character set definitions. He is now unable to restore any of his tables. Prior to making the change he carried out the following steps; 1. Printed out the schema(scripts) for each database, 2. BCP`d all data out of SQL.
He the proceeded to make the change (via SQL Setup, rebuild master database option), then he recreated each device (data and log), recreated each database (data and log), ran each schema to rebuild each database (structure, views, etc) and then BCP`d all data back into databases.
He has been doing a full backup everyday since. He needs to restore a table but when he does so SQL reports that the schema is different between source and destination, no changes have been made.
Hi, I am trying to restore SQL7 DB from the Network M/C,here is the Procedure i am following
i have backup file on ABCsqlbackup where ABC is M/c Name on the network
from my Server i mapped ABCsqlbackup to the I drive then from enterprise magager i tried to restore DB and i gave path as I:xyz.bak for backup device location where xyz.bak is backup file name.
when i tried to restore like this it is giving error "unable to verify backup file location" and i checked in SQL server logs i found that message like.. "Unable to open Backup Device I:xyz.bak Failed to open.Operating system error,Unknown user name or bad password"
and that Sqlbackup directory is shared and it has full access to everyone.
Can anybody tell me how to restore from the Network, and where i am doing wrong.
Hi, I restored the data files .MDF , .LDF files from my nt backup. Now i want to apply these file to a database. How i have to apply? Do i need to create new database and attach these files or how i have to do? I have no idea, how i have to work on it? pls suggest me. Thank you everyone.
Hi All, I am trying to restore transaction log using T_SQL: restore log transfer from transfer_log with file = 2 ,norecovery
and also I was Trying-- restore log transfer from disk = 'c:mssql7ackupransfer_log.dat' with file = 2,norecovery
I am getting this error Message-
Server: Msg 4306, Level 16, State 2, Line 1 The preceding restore operation did not specify WITH NORECOVERY or WITH STANDBY. Restart the restore sequence, specifying WITH NORECOVERY or WITH STANDBY for all but the final step. Server: Msg 3013, Level 16, State 1, Line 1 Backup or restore operation terminating abnormally.
Our branch office in Europe has sent full 'backup' file of capacity 25GB. I have to restore this backup to our database. Their database is 'Candidate' and our database is 'client'. Both these databases have different logical names and physical names.
The following Batch script only I hv executed,
RESTORE DATABASE Client FROM DISK = 'd:dumppaw01dump.bak' WITH MOVE 'candidatedata' TO 'e:mssqldataclient_data.mdf', MOVE 'candidatelog' TO 'd:mssqllogclient_log.ldf', REPLACE
Can anybody tell me, what I have executed above is correct or not. Now restoration is going on for more than an hr. Still it is going on. Is there any other way to restore this backup set very fastly.
Our server has got very good hardware setup. Good amount of hard disk space. 4GB RAM Memory. Running 4 processors. No other service is running apart from SQL Server. Right now nobody is accessing the server.
How long it will take to restore this backupset?. This is urgent please.
THere has been a peculiar db crash at my site .I no backup of my database but u have the Data Device and the Log device ie 2 DAT files .can i by any means get the data out of them or restore them to a new instance of the database i create.
Hi Guys, I am trying to restore a master database from a server to another server. I followed all the step necessary to restoring the Master database. I first rebuild the master and then put the master in single user mode and then trying to restore the master database. The problem is the database says master database is restored success fully and also it shut down the service. When I restart the server it startup and then after some minuite it doesnt show started status in the services panel. when I refresh the services it still doesn't say started. I also try to connect to the database and it says the server is not available. I have added service pack 3a to this new server. Don't know why it says that. Any have any idea. I have to do this immediatly and please guys, let me know any solution to this problem. I really appreciate your help. Thanks again. Cheers!
Hi All, I have a production issue should be attended immediatly. We are running SQL Server 2000 in a production environment. The master database is corupted. We have a backup of Master database. But the server service is not starting. I don't know how to restore the master database from the backup when server is not up. Can u please letme know how to do it ASAP. I really appreciated for your grate.... help. Thanks in advance. Jamy
I am creating a view consisting of 278 to 300 columns. ( I want to use this view for data entry). The columns are of varchar(30) datatype. I am able to successfully create the view but upon opening the view in Enterprise Manager or Access I get the following error:
Does any one know how to resolve DBCC errors 9000 to 9999? The BOL does not give any explaination as to how to handle such errors. Microsoft search engine also does not offer any help on these error messags.
I am trying to Sharepoint Portal server with sql2005 on the normal everyday transactions everything works fine. However when we try to run SPS restore cannot we keep getting this error. This is VERY URGENT as we are trying to deploy a new site but cannot until issue is resolved. 'TWIGAdministrator' has already been given dbowner rights to all databases and can run backup but not restore.
Error Message:
Login failed for user 'TWIGAdministrator'. [CLIENT: 192.168.1.8]
Surely someone has tried this these are two very popular applications but unfortunately there is nothing in the sps site or sql2005 to help with this issue.
I don't know if this is the right forum to post this question, but here it goes.
We have restored into sql 2005 the database backups made in sql 2000. We connect with trusted connection and application roles, and when trying to execute a transaction to another database (with the guest user), we get a permission error.
Does anyone know if, apart from restoring the databases, we should do something else to get the guest user working the same way as with sql 2000 in the restored databases?
I did a full backup of a db from one server(Express2005) and trying to restore it to a different instance of SQL2005 on the same development machine. (Also had some fulltext columns if that means anything)
Many failures but finally got it to report all was successful except the icon in Object Explorer shows (Restoring...) with no indication of any real activity going on. It's a tiny database with hardly any data in it.
Just not sure what the heck is going on there. It also won't let me into the database until this the (Restoring...) goes away.
I recently updated the datatype of a sproc parameter from bit to tinyint. When I executed the sproc with the updated parameters the sproc appeared to succeed and returned "1 row(s) affected" in the console. However, the update triggered by the sproc did not actually work.
The table column was a bit which only allows 0 or 1 and the sproc was passing a value of 2 so the table was rejecting this value. However, the sproc did not return an error and appeared to return success. So is there a way to configure the database or sproc to return an error message when this type of error occurs?
I have a parent package that calls child packages inside a For Each container. When I debug/run the parent package (from VS), I get the following error message: Warning: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
It appears to be failing while executing the child package. However, the logs (via the "progress" tab) for both the parent package and the child package show no errors other than the one listed above (and that shows in the parent package log). The child package appears to validate completely without error (all components are green and no error messages in the log). I turned on SSIS logging to a text file and see nothing in there either.
If I bump up the MaximumErrorCount in the parent package and in the Execute Package Task that calls the child package to 4 (to go one above the error count indicated in the message above), the whole thing executes sucessfully. I don't want to leave the Max Error Count set like this. Is there something I am missing? For example are there errors that do not get logged by default? I get some warnings, do a certain number of warnings equal an error?
Starwin writes "when i execute DBCC CHECKDB, DBCC CHECKCATALOG I reveived the following error. how to solve it?
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -2093955965, index ID 711, page ID (3:2530). The PageId in the page header = (34443:343146507). . . . . . . . .
CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1635188736)' (object ID -1635188736). CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1600811521)' (object ID -1600811521).
. . . . . . . .
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -8748568, index ID 50307, page ID (3:2497). The PageId in the page header = (26707:762626875). Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -7615284, index ID 35836, page ID (3:2534). The PageId in the page heade"
This morning I can not connect to our SQL Server 7.0 whatever from client or server. The error message which I list below:
++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++ A connection could not be estabished to server--Timeout expired Please verfy SQL Server is running and check your SQL Server registration properties and try again. ++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++
We use windows NT authentication. We did not do any change on NT. The SQL Server daily schedule job usally stoped at 10:00AM, but today from the Window NT Task Manager, we can see that the SQL Server is still running untill now.
hi, I have settup up sql mail and did the following: 1. created an E-mail account and configured Out look by creating a pop3 mail profile. tested it by sending and receiving mail, that is ook 2. I Created one domain account for MSsqlserver and Sql Agent service. both services use same account and start automatically in the control panel-services 3. I used the profile that I created in outlook to test the sql mail but got an error: Error 22030 : A MAPI error ( error number:273) occurred: MapiLogon Ex Failed due to MAPI Error 273: MAPI Logon Failed
I really do not know what went wrong. I followed the steps from bol and still having a problem. Am I missing something.
I do have a valid email account I do have a valid domain account I tested outlook using the email account and it worked. so why sql server does not recognise MAPI.
My next question, How to configure MAPI in Sql server if what I did was wrong.
Hi, I have 2 windows 2000 server in cluster with sql server 2000 enterprise edition installed. I have activated the Server-Requested Encryption by using the sql server network utility (Force Protocol Encryption). After this, I have stoped sql server service. But I can't start it at this moment. The error is: 19015: The encrypton is required but no available certificat has been found.
Hello, I am facing a huge problem in my sql server database using access as a front end.The main problem is trying to execute queries "views" ,since they reside on sql server now,and using variables or parameters in reports and forms to filter on this query. Ex. how can the following be implemented using the same query but in sql server? Access ------ SELECT MAT_Charts.YYYYMM FROM MAT_Charts WHERE ((([Area_Code] & "-" & [GROUP_CODE])=[Reports]![MAT_Chart_C1].[MAT_Key])) GROUP BY MAT_Charts.YYYYMM;
It is specifically this statement in which I am interested: [GROUP_CODE])=[Reports]![MAT_Chart_C1].[MAT_Key]))
I am getting error in sysindexes when i run dbcc checkdb on a production db. the error is Server: Msg 8928, Level 16, State 1, Line 1 please help me to remove this all the options of dbcc checkdb as well as table are not helping me
Hi, I am restoring a database as a complete step. The database icon, under the Sql server Group in the Sql server enterprise manager, turned into gray and got a word (loading) infront of the database name, what does that means?
I am just curious to know whether it's possible to restore a SQL 6.5 DB from a DB device file. For e.g. i have a device file abc.dat which contains a db. Now thru this device file can i restore the data on xyz database.
I had SQL win2k running on a machine and had 2 dbs. unfortunately the hard drive failed (ntldr crashed). i was able to copy the contents of from the old drive (so i have the DB files) but no backups.
Is there any way to import this data into a new DB?
Can you restore a backup (bak) file to a different server? E.g. client gets server nicked, they have bak files, can I run a restore to my sql server? I can see the with MOVE option, but I can't see how to attach (to the new server) if the database wasn't detached (from the nicked server).
i am getting the following error when i try and restore a datbase
The log in this backup set begins at LSN 110000000011300001, which is too late to apply to the database. An earlier log backup that includes LSN 102000000188100001 can be restored..
while iam restoring my back up i got this error message
Msg 3117, Level 16, State 1, Procedure res, Line 26 The log or differential backup cannot be restored because no files are ready to rollforward. Msg 3013, Level 16, State 1, Procedure res, Line 26 RESTORE DATABASE is terminating abnormally.
Hey all.Can anyone point me in the general direction of documentation whichwould tell me how to restore a DB via the command line instead of usingenterprise manager?ThanksMatt
