Errors When Trying To Build SSIS Packages
Oct 18, 2007
II am using file system for the SSIS Packages. I have several packages in a project. Most of these packages use configuration files. Infact there are several packages which use the same configuration files. Now when I try to run the build utility, it errors out saying that the name.dtsconfig file already exists. Seems like this is a bug. I would really like to use this utility.I know if the config file is not used in any other pacakge probably the build will not fail. But it is not good practice to have one config file for each package, it is redundancy, does not make sense to that. Is there any way I can use the build and deployment utility without this error.
Please advice.
Thank you.
View 4 Replies
ADVERTISEMENT
Dec 23, 2005
I have created ssis package. It has been successfully running at UI level.
But when i am trying to execute it from the command prompt by using dtexec utility it is showing the following error messages.
Error: 2005-12-23 17:01:57.67
Code: 0xC00470FE
Source: Data Flow Task DTS.Pipeline
Description: The product level is insufficient for component "Flat File Source" (1).
End Error
Error: 2005-12-23 17:01:57.67
Code: 0xC00470FE
Source: Data Flow Task DTS.Pipeline
Description: The product level is insufficient for component "Script Component" (9).
End Error
i have entered the command as follows.
dtexec /f "c:somefolderpackage1.dtsx"
Any points regarding this issue would be helpful.
View 7 Replies
View Related
Jan 11, 2008
I have added an email task to the ON Error Event of my SSIS package, so that I will always know when there are errors.
However I would like the SQL Server job executing the package to succeed even if the package fails.
What setting do I change in the SSIS packageto achieve this? MaximumErrorCount?
View 1 Replies
View Related
Jan 11, 2008
Hi,
I have stumbled on a problem with running a large number of SSIS packages in parallel, using the €œdtexec€? command from inside an SQL Server job.
I€™ve described the environment, the goal and the problem below. Sorry if it€™s a bit too long, but I tried to be as clear as possible.
The environment:
Windows Server 2003 Enterprise x64 Edition, SQL Server 2005 32bit Enterprise Edition SP2.
The goal:
We have a large number of text files that we€™re loading into a staging area of a data warehouse (based on SQL Server 2k5, as said above).
We have one €œmain€? SSIS package that takes a list of files to load from an XML file, loops through that list and for each file in the list starts an SSIS package by using €œdtexec€? command. The command is started asynchronously by using system.diagnostics.process.start() method. This means that a large number of SSIS packages are started in parallel. These packages perform the actual loading (with BULK insert).
I have successfully run the loading process from the command prompt (using the dtexec command to start the main package) a number of times.
In order to move the loading to a production environment and schedule it, we have set up an SQL Server Agent job. We€™ve created a proxy user with the necessary rights (the same user that runs the job from command prompt), created an the SQL Agent job (there is one step of type €œcmdexec€? that runs the €œmain€? SSIS package with the €œdtexec€? command).
If the input XML file for the main package contains a small number of files (for example 10), the SQL Server Agent job works fine €“ the SSIS packages are started in parallel and they finish work successfully.
The problem:
When the number of the concurrently started SSIS packages gets too big, the packages start to fail. When a large number of SSIS package executions are already taking place, the new dtexec commands fail after 0 seconds of work with an empty error message.
Please bear in mind that the same loading still works perfectly from command prompt on the same server with the same user. It only fails when run from the SQL Agent Job.
I€™ve tried to understand the limit, when do the packages start to fail, and I believe that the threshold is 80 parallel executions (I understand that it might not be desirable to start so many SSIS packages at once, but I€™d like to do it despite this).
Additional information:
The dtexec utility provides an error message where the package variables are shown and the fact that the package ran 0 seconds, but the €œMessage€? is empty (€œMessage: €œ).
Turning the logging on in all the packages does not provide an error message either, just a lot of run-time information.
The try-catch block around the process.start() script in the main package€™s script task also does not reveal any errors.
I€™ve increased the €œmax worker threads€? number for the cmdexec subsystem in the msdb.dbo.syssubsystems table to a safely high number and restarted the SQL Server, but this had no effect either.
The request:
Can anyone give ideas what could be the cause of the problem?
If you have any ideas about how to further debug the problem, they are also very welcome.
Thanks in advance!
Eero Ringmäe
View 2 Replies
View Related
Mar 22, 2006
Hello,
we have automated build on every night. In our solution is SSIS project, where each package is encrypted per password. We call build process per command line like this..
C:ProgrammeMicrosoft Visual Studio 8Common7IDEdevenv.exe (c:DevelopmentX3\X3.sln /build Release)' in 'c:DevelopmentProjectsDailyBuild
Through build process we get a error:
External Program Failed: C:ProgrammeMicrosoft Visual Studio 8Common7IDEdevenv.exe (return code was 1):
We think a reason is, that on build of SSIS project must be entered a password. You can wonder for what we need that SSIS packages are part of our build. We hope that on build process is also created Deployment Utility, if so set in dtproject.user. Is it so? Is there any way to create Deployment utility on automated build process? Can be a password provided pre command line?
with best regards
Anton Kalcik
View 5 Replies
View Related
Feb 16, 2007
Hi all, I have newly implemented a Try, Catch in my code (pasted below) and for some reason when I try to have the text of a label changed in the Catch exception, it says "Build failed" and doesn't tell me where the error is. Could anyone tell me what they can see is wrong please? Public Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click
Try 'error handler for if there is a dulplicate tillname in database (e.g. when user clicks refresh after submit)
Dim tillname As String
tillname = TxtTillName.Text
SQLDataSource1.InsertParameters("Till_Name").DefaultValue = tillname
SQLDataSource1.Insert()
TxtTillName.Text = ""
Catch ex As SqlException 'What to do if there is a duplicate tillname
'Label2.Text = "test"
errorLabel.Text = "This till already exists"
Finally
SQLDataSource1.Dispose()
'errorLabel.Text = "Till sucessfully added"
End Try
End Sub
Protected Sub SqlDataSource1_Selecting(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.SqlDataSourceSelectingEventArgs) Handles SQLDataSource1.Selecting
End Sub
Protected Sub GridView1_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles GridView1.SelectedIndexChanged
End Sub
Protected Sub SqlDataSource2_Selecting(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.SqlDataSourceSelectingEventArgs) Handles SqlDataSource2.Selecting
End Sub
View 4 Replies
View Related
Apr 9, 2007
Hi,
I'm new to SQL Server RS.
I'm getting build errors after writing the following code:
List<ReportParameter> reportParam = new List<ReportParameter>(); reportParam.Add(new ReportParameter("Database", connectionString)); reportParam.Add(new ReportParameter("master_dept", hidMasterDept.Value.ToString().Trim())); reportParam.Add(new ReportParameter("station_id", hidStationId.Value.ToString().Trim())); reportViewer.ServerReport.SetParameters(reportParam)
The error message is as follows:
No overload for method 'ReportParameter' takes '2' arguments
But when I build the page using "Build Page" command from the menu, it builds successfully and then the project build succeeds.
When I modify any other page and build the solution, the same build error for this page occurs again.
Any idea how to resolve this? Been spending a lot of time figuring this out.
Thanks in Advance,
Manjunath HK
View 5 Replies
View Related
Apr 19, 2007
hi,
I moved my ssis solution from on dev machine to another.
When building the solution, visual studio keeps saying that the build failed but no errors are returned which is not really helpful...
any clues would be appreciated.
thanks
View 4 Replies
View Related
Sep 12, 2007
Hi,
I've just installed SQL 2005 SP2 Rollup 3 Package (Build 3186) on a 2 node X64 W2K3 Cluster.
Everything went fine, although after the install, the SQLAgent Services of my instances started to complain about delegation not enabled for the domain account used for the SQLAgent Service.
SPN's were already registered, so I've enabled unconstrained delegation & no errors anymore..
Apparently we're obliged to enable delegation as soon as this hotfix is installed
(maybe due to fix 938086 included in it ?)
To make this setup more secure, we would like to enable constrained delegation.
This does not seem to work, as soon as we choose constrained delegation by adding the SPN of the clustername to the domain user account we're running with & restart the sql agent, it fails with the same error as when no delegation was configured:
! [298] SQLServer Error: 22022, CryptUnprotectData() returned error -2146892987, 'The requested operation cannot be completed. The computer must be trusted for delegation and the current user account must be configured to allow delegation.' [SQLSTATE 42000]
! [442] ConnConnectAndSetCryptoForXpstar failed (0).
Summary:
With Unconstrained delegation enabled for computer account & user account, everything goes fine.
As soon as constrained delegation is chosen, by adding the SPN's to the domain user account of SQL Agent, SQL agent fails to start.
We use a domain account for the SQL Agent.
This account has an 2 SPN registered on it
MSSQLSvc/<FQDN SQL instance network name>:1433
MSSQLSvc/<FQDN SQL instance network name>
Connections to SQL go fine, authorization scheme is Kerberos even when SQL Agent fails to start due to this delegation failure.
Domain account has "act as part of operating system" & "impersonate a client after authorzation"
Anyone an idea ?
View 25 Replies
View Related
Jan 9, 2007
I've run into a problem with SSIS packages wherein tasks that write or copy files, or create or delete directories, quit execution without any hint of an error nor a failure message, when called from an ASP.NET 2.0 application running on any other machine than the one where the package was created from. By all indications it appeared to be an identity/permissions problem.
Our application involves a separate web server and database server. Both have SQL Server 2005 installed, but the application server originally only had Integration services. The packages are file system-deployed on the application server, and are called using Microsoft.SqlServer.Dts.Runtime methods. For all packages that involve file system tasks, the above problem occurs.
When the above packages are run using the command prompt (either DTEXEC or DTEXECUI) the packages execute just fine. This is expected since we are using an administrative account. However when a ShellExecute of the same command is called from ASP.NET, the same problem occurs.
I've tried giving administrative permissions to the ASPNET worker process user to no avail.
I have likewise attempted to use the SQL Server Agent job approach but that approach might not be acceptable for our clients since it means installing SQL Server 2005 Database services on the application server.
I have read the relevant threads in this forum, namely http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1044739&SiteID=1 and http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=927084&SiteID=1 but failed to find any solution appropriate for our set up.
Anybody got any idea on how to go about this?
View 33 Replies
View Related
Apr 22, 2015
We manage some SSIS servers, which has only SSIS and SSIS tools installed on them and not the sql server DB.
SSIS packages and configuration files are deployed on a NAS. We run the SSIS packages through DTEXEC by logging in to the server.
We want to allow developers to run their packages on their own on the server, but at the same time we dont want to give them physical access on the server i.e we do not want to add them into RDP users list on server properties. We want them to allow running their packages remotely on the server.
One way We could think of is by using powershell remoting and we are working on that. But is there any other way or any tool already present for the same.
View 4 Replies
View Related
Jan 5, 2004
HI!!
I've been working for an year or so with DTS, but it still makes me mad with it's cryptic error messages!!!!
"The task reported failure on execution" is one of the "funny" error messages I retrieve. I've tried with the log option, but error messages stored there are as cryptic as the one shown on the screen!!!!!
Timothy Peterson in "MS SQL Server 2000 DTS" provides code chunks that can be used to "decode" numerical error messages into something readable and understandable, but I really don't realize where should I put that code :( It seems to work only if you are executing packages via Visual Basic, and not using the MMC
That's it, I really do need help with this!!!!!!! I beleive that there's someone out there that had faced and solved this problem !
Thanks in advance
lorena
View 2 Replies
View Related
Jan 15, 2008
Hi,
I have a bunch of SSIS packages that were created on a 32-bit machine (OS as well as SQL Server) where they run without error. I have moved them to a machine with a 64-bit OS as well as 64-bit Enterprise SQL Server, SP2. Initially I encountered errors with the packages that contained Script Transformation tasks where I had to set PreCompile=True. This allowed me to execute the packages individually. When I try and execute them as a batch, I encounter errors on various packages. They don't seem to be consistent - sometimes the error occurs on one package, the next time it will be on a different package. Sometimes they occur pre-execute, sometimes post-execute. Here are a couple of example errors:
[OLE DB Command [1007]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "TCP Provider: An existing connection was forcibly closed by the remote host. ".
[Insert Destination [1177]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "TCP Provider: An existing connection was forcibly closed by the remote host. ".
The source database is on a different server, but the destination database is on the same server as the SSIS packages for testing purposes. Any information would be appreciated...
Thanks.
View 1 Replies
View Related
Sep 25, 2007
I'm experiencing some frustration with my active/passive SQL cluster not running my .DTSX packages. I am hoping someone can shed some light on what I need to do.
I've created some .DTSX packages with the SQL Server Business Intel Dev Studio. I initially built & tested these packages in a non-SQL cluster environment without any problems. I'm now re-creating them to work on our SQL cluster. If I run the package through the Dev Studio it works great.
The packages basically grab .txt files from one of the shared drives (which is a resource of the sql cluster group) and imports the data into the one of the databases. The database does not have any special settings (right-click -> new database... -> enter name -> click ok).
I've setup a SQL Server Agent Job with 1 step with the following properties.
Step name: I Offices
Type: SQL Server Integration Services Package
Run as: SQL Agent Service Account
Package source: File system
Package: G:ImportRAGFLOffices.dtsx
When I run the SQL Server Agent Job through MSSQL Server Management Studio (right-click -> start job) I get an error on "Execute job 'RAGFL TestJob'".
These are the 2 messages that show up when I view the history of the SQL Server Agent job.
***********************************************************************************************
Date 9/25/2007 1:16:13 PM
Log Job History (RAGFL TestJob)
Step ID 0
Server BADBOYS
Job Name RAGFL TestJob
Step Name (Job outcome)
Duration 00:00:01
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
The job failed. The Job was invoked by User sa. The last step to run was step 1 (I Offices).
***********************************************************************************************
***********************************************************************************************
Date 9/25/2007 1:16:13 PM
Log Job History (RAGFL TestJob)
Step ID 1
Server BADBOYS
Job Name RAGFL TestJob
Step Name I Offices
Duration 00:00:01
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: THEISLANDAdministrator. The package execution failed. The step failed.
***********************************************************************************************
THEISLAND is our internal domain.
View 2 Replies
View Related
Nov 14, 2007
Hi,
I have developed one SSIS package. Later on i deleted one unused connection from it.
When I try to deploy the package, it is giving error that the connection is missing from the container of collection.
The same package is executing successfully even after throwing this error.
Please advice
Thanks is advance
View 1 Replies
View Related
Aug 28, 2006
hi,
i have a global variable that is a file dir param lets say: d:input2006_07_18.bcp.
this param supposed to be built from other 3 params i.e: day, month and year.
how do i build it dinamically i need the exact syntax. i have already put the filedir param as an evaluated expression but when i try to do somthing like:
@[User::Filename] + @[day] + @[month] + @[year] i get an error, although i succeed in putting only one param at its expression i.e: @[user:filename].
the question is how do i build the parameter that will b built from these 3 params in its expression.
Brian, i will b happy to hear from you in regard.
thx,
Tomer
View 8 Replies
View Related
Jun 28, 2007
Can anyone help me with this ?
I am trying to extract data from oracle 9i server and
pushing it onto the SQL Server 2005 using Data Flow Task.
Details for OLE DB Source are :
OLE DB Source Editor Details:
OLE DB Connection Manager - Oracle Source
Data Access Mode - SQL Command
SQL Command Text -
SELECT EMPNO, EMPNAME, JOB, HIREDATE
FROM EMP_DETAILS
WHERE (HIREDATE > TRUNC(SYSDATE) - 1)
SSIS parses this query succesfully but when i build the query it shows query
SELECT EMPNO, EMPNAME, JOB, HIREDATE
FROM EMP_DETAILS
WHERE (HIREDATE > TRUNC("SYSDATE") - 1)
Please note :- SYSDATE IN " "
This query returns no Result Set.
View 6 Replies
View Related
Apr 28, 2006
Hi,
I'm working with SSIS and I would add the Integration Service project to the daily build process but I need to know how to generate the <name>.SSISDeploymentManifest other then invoking the devenv.exe.
Thanks,
View 3 Replies
View Related
Aug 20, 2007
All:
I've implemented a variation of the Custom Logging provided in this post by Jamie Thomson.
http://blogs.conchango.com/jamiethomson/archive/2005/06/11/SSIS_3A00_-Custom-Logging-Using-Event-Handlers.aspx
Everything seems to work well on my desktop during development, but when I deployed the packages to our DEV environment the packages still execute, but I'm now receiving warning messages in the sysdtslog90 log table...
Precompiled script failed to load. Attempting to recompile. For more information, see the Microsoft Knowledge Base article, KB931846 (http://go.microsoft.com/fwlink/?LinkId=81885).
My log table (SSISLog) looks OK, with only OnPostExecute messages that include the package / task information and rowcounts.
The KB article suggests upgrading to SP2, but I'm well past SP2, using Build 3159 on both machines.
Any suggestions on how to get rid of the warnings?
Thanks!
Leda
View 2 Replies
View Related
Apr 24, 2006
Hi,
Is there a way to reuse existing Configuration Files in SSIS Packages?
I have two packages with the same connection managers, properties and variables.
I want to reuse the Config file of the 1st package in the second one. While building the packages it gives error like
“Config file already exists cannot recreate”.
View 1 Replies
View Related
Jun 8, 2007
Hi All,
I have created SSIS (.dtsx) files and have stored in different servers.
Now my query is I want to move all dtsx files from filesystem to Sqlserver2005 database how should i do it.
Please help
Regards
Hassan
View 2 Replies
View Related
Oct 16, 2007
I need to create the ssis package in business intelligence developement studio i am need to sqlserver 2005.When i opened the BID studio i am not able to see the integration services packages type..
Please help the steps to design the package.
I have experience of using the 2000 in dts designer mode.
Thnks for your help in advance.
View 1 Replies
View Related
Mar 14, 2008
Hi,
iam New to Packages. So Please give me the guidelines to Learn Packages.
Thanks for Advance
View 3 Replies
View Related
Mar 12, 2007
Hi,
I upgraded to Microsoft SQL Server 2005 Service Pack 2 and now when I run the master SSIS package( that has several packages in it), all the packages run twice.
After removing SP2, they work fine. Any ideas how to make this work with SP2?
View 2 Replies
View Related
Aug 24, 2006
I am writing a vb application that is supposed to let the users set the connection string for the datasources in the package. After new connection strings are entered the application is supposed to run 8 packages in a certain order, but I haven't been able to set a new connection string successfully. Is there a way to programmatically modify the connection string of a package's datasource? (the packages are moving data from a D3 database to sql server 2005)
Here is what I have tried so far:
A.
Dim pkgLocation As String
Dim app As Application = New Application()
pkgLocation = "c:Package1.dtsx"
Dim pkg As Package = app.LoadPackage(pkgLocation, Nothing)
Dim myConns As Connections = pkg.Connections
MessageBox.Show(myConns(0).ID.ToString)
Dim myConnMgr As ConnectionManager = myConns(0)
Dim connProperties As DtsProperties = myConnMgr.Properties
connProperties(0).SetValue(myConnMgr, "notsupposed=towork;")
MessageBox.Show(myConnMgr.ConnectionString)
B.
ConMgr = p.Connections.Add("OLEDB")
ConMgr.ConnectionString = "Provider=SQLNCLI.1;Data Source=192.168.0.233; User ID=sa; Initial Catalog=Rmt_New"
ConMgr.Name = "SqlDatabase"
ConMgr.Description = "Sql Connection"
Any help would appreciated.
View 1 Replies
View Related
Feb 28, 2006
I am connecting to a DB2 mainframe to pull data into SQL 2005. Very simple import. SSIS package works fine on 32 bit. However, once deployed to the 64 bit machine, I get "invalid product license" on the Acquire Connection method.
I've worked with IBM support. I have the correct version of the DB2 Connect client installed. The license is there and in the right place. I can connect to the mainframe from the 64 bit server using the DB2 client tools. I just can't seem to execute the package from Integration Services or run a job in SQL Server that executes the package.
According to BOL, the package should automatically detect the 64 client I installed. It and the 32 bit client I developed with share the same name/id.
Am I missing something? Any hints?
View 3 Replies
View Related
Feb 7, 2007
Where are SSIS packages stored and how can I see them in SQL Server Management studio?
View 6 Replies
View Related
Sep 15, 2006
I read in Kirk Haselden's book "Microsoft SQL Server 2005 Integration Services" that if SQL Serfver 2005 and 2000 are installed on the same machine as seperate instances then you can view the SQL Server 2000 DTS packages in 2005 Management Studio under the Management tree, Legacy, Data Transformation Services node.
But in my case, I am not able to see DTS packages in Management Studio. Is there a property or a setting that we need to configure for that?
Thanks.
View 2 Replies
View Related
Aug 1, 2007
hi,
I am trying to use SSIS package to trasfer data and hitting road block for
[SQL Server Destination [37]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Could not bulk load because SSIS file mapping object 'GlobalDTSQLIMPORT' could not be opened. Operating system error code 2(The system cannot find the file specified.). Make sure you are accessing a local server via Windows security.".
How can i resolve this!!
thanks
View 2 Replies
View Related
Jan 17, 2007
I'm still new to SSIS packages and I'm NOT a developer. I am in the process of doing preliminary/prepatory work for migrating our SQL 2000 platforms to SQL 2005.
I am having a REAL headache with migrating/moving DTS packages from SQL 2000 to SQL 2005. Here are things that I know :
1. I know that some packages cannot be migrated due to ActiveX issues and other issues. Fine.
2. I know that I can install DTS backwards compatibility components on the server in order to be able to edit the DTS packages using a SQL 2000 DTS GUI. Fine.
3. I know that I can use the Migration wizard to migrate packages (and that some of them can't be migrated this way). Fine.
Here's what I don't know/or am conjecturing:
1. In a clustered environment, I have to edit the <%Install Path%>/90/DTS/Bin/MsDtsSrvr.ini.xml file to set the <ServerName> property to the Virtual Server name. Correct? Why can't M$ do this for me?
2. Do I HAVE to export the SSIS package to a .DTSX file in order to be able to edit it with Visual Studio? Is there ANY way around this?
3. If I am running in a clustered environment and I use the File System for storing packages, then the pacakges must be stored on a shared volume, right?
4. I did not find SQL Server Integration services on the B- (Passive) node. Do I have to install it separately onto the B server (much like having to install the Client Tools)?
If anyone has some guidance or tips on running SSIS in this brave, new, wonderful world, I would sure appreciate it.
And yes, I am going to go out right now and order a new book on SSIS.
Regards,
hmscott
View 3 Replies
View Related
May 11, 2007
Hello,
When I try to save modifies in packages with many components the system show me a information dialog telling me that there was a System.OutOfMemoryException
Anyone knows how to solve this problem without divide the package in 2 or more packages?
View 6 Replies
View Related
Apr 17, 2008
HI Gurus,
What permissions one sholud have to cretae and execute SSIS packages.
Thanks,
ServerTeam
View 1 Replies
View Related
Jun 3, 2008
Hi All,
I've been assigned a task by one of the programmer in my team to create packages from some of the databases(One from SQL2005&Other one from SQLEXPRESS)
I've created and saved the packages using the export wizard.I saved the Packages as Integration Services Packages(On file System).
Now he wants me to execute the packages using SSIS But in different time,like maybe after 5min.Other package runs.
I really have no clue how to do that,I've added Both packages in SSIS,But i really dont know how to run them in different time.
If anyone could help please do so!
View 3 Replies
View Related
