Etl Use OleDb And Loose Connection Password
Sep 12, 2007
Hello world.
I have a big problem.
Im writing an application in Sql 2005 Etl.
This application use 2 kind of ole db connection. One towards a Sql Server, and the other towards As400
to use ole db towords As400 is necessary to save user and password to connect.
There is a flag to save password.........and obviously a checked it. !!!!!
The problem is:
If I stay inside Visual studio and i use this application.......all is correct.
If I use my application in sql like a job.........loose password information and crash immediatly
someone can help me ?????????
thanks all in advance.
Alberto.
View 5 Replies
ADVERTISEMENT
Feb 17, 2006
I'm creating an xml configuration file to hold the connection string including the password (sql server authentication). My package protection level is set to 'EncryptSensitiveWithPassword'. I set up my connection manager and I check the 'Save my password' box. The 'Test connection' button reports that the connection is OK. I enable the package configurations and I go through the Package Configuration Wizard and I specify 'xml configuration file' and I choose 'Specify configurations settings directly' and I specify a configuration file name with the same directory as the package. I check the 'ConnectionString' property and the 'Password' property and then click 'Close'. Then I save my package changes. Now I look at the xml configuration file in a text editor and I see the Password property has an empty element:
<ConfiguredValue></ConfiguredValue>
Is it supposed to be empty? When I right-click the package in solution explorer and pick 'Reload with upgrade' then I have to enter the password, but the validation fails with 'Acquire connection' error. Should I just be saving the 'Connection string' property, or should I save all the connection elements (i.e. ServerName, UserName, Password etc.)? If I edit the xml configuration file and I type the password into the <ConfiguredValue> element above, and then I do 'Reload with upgrade', then the 'Acquire connection' validation error goes away. Could this mean that I am not able to encrypt the password? Thanks.
View 2 Replies
View Related
Sep 14, 2007
Hi,
After I had transfered SSIS package to another PC I tried to open package and I got an error. ".. Failed to decrypt protected XML node "PackagePassword" with error . ".
It turned out, that the password wasn't saved in a OLEDB connection manager of the Package. However "save password" options checked!
But password field was empty.
As soos as I enter password the package executes successfully.
Question: How can I transfer a password for OLEDB Connection within a SSIS package to another developer's VS2005?
View 4 Replies
View Related
Feb 6, 2008
I have a package that uses a for loop to iterate through an unknown amount of excel files and pull their data into a table. However, there will be cases when the file is corrupted or has some sort of problem so that either the transformation will fail or the excel data source will fail with an oledb connection error.
Could anyone suggest a clean way to trap these errors? Specifically, the "Cannot Aquire Connection from Connection Manager", which is the excel connection.
Thanks,
John T
View 3 Replies
View Related
Apr 18, 2008
I deployed a package on mssql-server.
How can I save passwords for OLEDB connections of the package?
I want to launch the package from server agent according to the schedule, but I don't know how can I save passwords for connectons?
Thanks in advance.
View 8 Replies
View Related
Aug 9, 2006
Is there anyone who tried to use a connection from connection manager to create a new connection in a script task? Including the password?
Now i passed the connection to the script task and called it in the vb script but then the password is not passed into the connect string.
Im searching for an example that works with passing the password in the connectstring?
Any help will be greatfull.
View 1 Replies
View Related
Apr 1, 2008
dear list can anyone figure out a workaround as to why OLEDB Provider MSDORA cannot store passwords
I have all the info stored in a table (Project Real Best Practise)
The user id I have stored in string ConfiguredValue gets transfered to OLEDB Provider MSDORA named (SQL_REAL_Source_myoradb) but not the password
To workaround this bug only with MSDORA can aynonne sugest a setting I should use in package security
ie the default is EncryptSensitiveWithUserKey?
thanks Dave
CREATE TABLE [admin].[Configuration](
[ConfigurationFilter] [nvarchar](255) NOT NULL,
[ConfiguredValue] [nvarchar](255) NULL,
[PackagePath] [nvarchar](255) NOT NULL,
[ConfiguredValueType] [nvarchar](20) NOT NULL
) ON [PRIMARY]
ConfiguredValue = Provider=MSDAORA.1;Password=abc;User ID=myuserid;Data Source=myoradb;Persist Security Info=True
PackagePath = Package.Connections[SQL_REAL_Source_myoradb].ConnectionS
View 5 Replies
View Related
Mar 9, 2007
All --
Please help.
I have some questions about connection strings.
BACKGROUND...
Note that I am using the "SQL Native Client OLE DB Provider", SQL Sever 2005 Express, ASP.NET, C#.NET, and VS.NET 2005.
Note that I do not want to use the "Attach a database file" type of connection string.
Note that I am using the site http://www.ConnectionStrings.com as a reference.
Note that this "Standard security" connection string...<add name="LocalSqlServer" connectionString="Server=MYTESTOFFICESERVERS;Database=MyDatabase;Uid=MyDatabaseUser;Pwd=MyDatabasePassword;" />...does not work and causes the following run-time error...A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)
Note that this "Trusted connection" connection string...<add name="LocalSqlServer" connectionString="Server=MYTESTOFFICESERVERS;Database=MyDatabase;Trusted_Connection=yes;" />...works but is less-than ideal because it uses a Trusted Connection rather than a Username/Password combination.
QUESTIONS...
(A) What exactly does the error in Item 4 mean?
(B) Do 4 and 5 imply that one must use a Trusted_Connection for all SQL Server 2005 Express connection strings when the database does not reside in the web application's App_Data folder or use a "Attach a database file" type of connection string?
(C) Are there any alternatives?
(D) What do you suggest?
Please advise.
Thank you.
-- Mark Kamoski
View 1 Replies
View Related
Mar 29, 2007
Both the OLE DB Connection and ADO.Net Connection in SSIS Package does not remember password.
Im connecting to a SQL Server 2000 box using its sa password as test.
The SSIS package runs fine when you first set up the connection in bids
The bottom line is that SSIS keeps forgetting the password I feed into
the two Connections that I'm using. I double-click a connection,
type the password in, check "Save my password" and hit "OK" but the
password disappears from there whenever I run the package or
double-click the connection again.
is there any known workaround for this issue as I would like to schedule my SSIS package using a SSIS Step in a SQL Server 2005 Agent job.
the only thing I found when googling this error was link below but the workaround described here is a little harsh
http://www.developersdex.com/sql/message.asp?p=1921&ID=%3C1146409399.447345.7470@j73g2000cwa.googlegroups.com%3E
thanks in advance
Dave
the box SSIS is running on is Windows 2003 Server Standard Edition latest service pack
SQL Server 2005 (no service packs )
View 14 Replies
View Related
Dec 20, 2007
I am very new to all thisI have a access databse wich uses a ODBC conection to mysql server. Ican open the and run the database find but if i leave the dadabaseloaded but do not use it when i go back to it is has lost theconection and i need to close the databse and reopen itIf there a way to make sure i alwasy have a coenctionThanks
View 1 Replies
View Related
Aug 9, 2007
My package needs to be a High Performance (target: 150,000 rows in 30 minutes) ETL solution. We are using all MS technologies - SSIS, SQL 2005, BIDS, etc. I need to loop the recordset executed by a Stored Proc in a Execute SQL Task in a Source Script Component.
If I use an ADO.NET Connection Manager, here is the code in the Source Script Component Public Overrides Sub CreateNewOutputRows()
Code 1
Dim sqlAdapter As New SqlDataAdapter
Dim dataRow As Data.DataRow
Dim ds As DataSet = CType(Me.Variables.rsSomeResultset, DataSet)
sqlAdapter.Fill(ds)
Iget: Error: System.InvalidCastException: Unable to cast object of type 'System.Object' to type 'System.Data.DataSet'.
Code 2
Dim oledbAdapter As New OleDb.OleDbDataAdapter
Dim dataTable As DataTable
oledbAdapter.Fill(dataTable, Me.Variables.rsSomeResultset)
Error: System.ArgumentException: Object is not an ADODB.RecordSet or an ADODB.Record. Parameter name: adodb
It works all right when I use an OLEDB Connection Manager with the second code sample.
Question: In order to extract the maximum performance, wouldn't it be preferred to use ADO.NET with SqlClient Provider in an all SQL Server 2005 environment? Or will an OLEDB Connection provide comparable or equal performance?
If so, what code can I use? Since the recordset returned by the Stored Proc (in the Execute SQL Task) can only be captured in a System.Object variable and you can only use the overload of the Fill() method of the OleDbDataAdapter to accept an ADO Recordset or Record object.
View 3 Replies
View Related
Oct 16, 2006
Are there compelling reasons to use one versus the other? I am completely redeveloping all of our site from .ASP, VBScript and Access, to ASP.NET, VB.NET and SQL Server 2005 Express. I have a lot of code in ADO and OLEDB already, and would like to make the change to the System.Data.SQLClient classes if I should.
Thanks, Tom
View 1 Replies
View Related
Jan 5, 2008
I have tried to connect ce database by using c++ and oledb, and failed in every turn, i dont know what i did wrong...
I created a new database by using create a new database sample in ssce bol, but i couldnt connect that database, it says invalid class string or authentication failed...
here is a simple example...
HRESULT hr;
CDataSource db;
hr = db.Open( "Provider=Microsoft.SQLSERVER.CE.OLEDB.3.5;Data Source=Newdatabase.sdf;Password='db_pwd'" );
if (FAILED(hr))
{
return;
}
and also, afx oledb headers causing lots of redefinition warnings, if i include both ssce headers and afxole headers...
and also oledb example in ssce bol download is missing, there is no such like example...
can you provide me simple example to connect any ce database?
Installed programs
visual c++ 9.0
sql server ce books online
sql server ce 3.5 runtime
sql server ce 3.5 server tools
windows xp sp2
thanks in advance
View 1 Replies
View Related
Jan 7, 2008
Hi there,
I know this has been a topic of discussion before and I have read and tried the suggestions to no avail. I have a few .dbf files to import into my sql database and I know that one needs to make a oledb connection to these files.
I am using the Jet provider and have tried setting the extended properties to all of the DBASE versions and still cannot get it to connect. These files' names are shorter than 8 chars so that issue is no problem in this case.
I can actually get these files to show in a Microsoft Access 2008 database when I import it from there so I know that I must be missing something in my SSIS project.
After doing some reading on this topic, it would seem that this shouldn't be such a schlepp but, here I am
Maybe I need to install some driver or somethin?
Regards
Mike
View 6 Replies
View Related
Jul 23, 2005
I need to conect my software from a remote client to a server, mystandard connection:Provider=SQLOLEDB.1;Persist Security Info=False;UserID=sa;Password=;Initial Catalog=MyDb;DataSource=192.168.0.100;Network=DBMSSOCN;andProvider=SQLOLEDB.1;Persist Security Info=False;UserID=sa;Password=;Initial Catalog=MyDb;DataSource=192.168.0.100;Network=DBNMPNTW;make a error connection,i have tryed with ODBC connection and its OK only in Named Piped.Can any one help me write the right connection string?thanksrm
View 2 Replies
View Related
Jan 15, 2008
Hi
I am using OLEDB Connection in script component. I get a login failure when I run the package. I use SQL Server authentication. Do you have to use windows authentication in script component? Thanks
View 6 Replies
View Related
Apr 16, 2008
An application vendor is telling me that their product will not run with SQL Server 2000 64-bit. Here is the layout:
* Dedicated 64-bit machine running Windows Server 2003 Enterprise, 64-bit.
* Separate application server running Windows Server 2003 - SBS.
Application server uses DCOM and OLEDB to obtain data from SQL Server.
My question: Is there any way for the application server to know if the data supplier is running 32-bit or 64-bit?
If so, then perhaps the application vendor is right.
If not, then they are just trying to put me off and avoid fixing a problem. In this case, I need an authoritative statement as ammunition to take back to their support department.
.... Warren
View 11 Replies
View Related
Jun 26, 2006
Hi
Im trying to connecting from SQL 2005 (win 64bit server) to a Oracle database via OLEDB but get the following message. The OraOLEDB.Oracle.1 provider is not registered on the local machine.
If we try ODBC we get the following message "error in initializing provider. Attemt to load Oracle client libraries threw BadImageFormatException.This problem will occur when running in 64bit mode whit the 32 bit Oracle Client components installed."
It should be the 64 bit client that is installed.
In the test environment (32 bit win) both works.
Pleas help
Rickard
View 3 Replies
View Related
Mar 21, 2006
Hello,
I'm trying to connect to a DB2 database via SSIS and I'm getting some problems:
I'm creating a new OLE DB Connection Manager and I'm getting two distinct errors:
1) When I try to use "IBM OLEDB Provider for DB2 Servers" I can create the connection manager and the connection is tested successfully.
But when I try to use the connection in OLE DB Source when I will list the tables I get this error:
Could not retrieve the table information for the connection manager 'MyDataSource'.
truncated. SQLSTATE=01004
CLI0002W Data truncated. SQLSTATE=01004
ADDITIONAL INFORMATION:
truncated. SQLSTATE=01004
CLI0002W Data truncated. SQLSTATE=01004 (IBM OLE DB Provider for DB2 Servers)
2) When I try to use "Microsoft OLE DB Provider for DB2" when I try to test the connection I get this error:
Test connection failed because of an error in initializing provider. The parameter is incorrect.
Anyone had these problems ?
Thanks,
Guber
View 5 Replies
View Related
Jul 25, 2002
Hi,
We have 3 -rd party application connected to one of our sql server 24 X 7
Once or twice a day application crashes
with application error (connection lost).
1.Is possible to trace application errors using SQL profiler ?
2. Create SQL alert or write to SQL log in case of falure for specific application ?
Thank you
Alex
View 2 Replies
View Related
Jan 30, 2007
I used to do this in DTS but wondered how to do it in SSIS. I have a For Each ADO recordset loop that reads these four columns into variables:
DataSource Name, Name(for a WHERE clause), user and password.
For each "Building" there is a new server to connect to, with identical tables. I have 10 tables in the loop to pump from one database to a SQL 2005 database (i.e. 10 dataflows). I want to set the source connection information with the variables. My questions:
1. How do I set the connection information for the source connections? Do I just set the properties for the connection manager and then it sets for all the sources? What property do I set--do I need a script task?
2. How do I use the values from the "Name" column in a WHERE clause in each data flow?
Thanks!
Kayda
View 4 Replies
View Related
Aug 9, 2007
Hi,
I am trying to Create an OLEDB Connection from SSIS to Inforrmix without any success. Would someone be able to help.We are running Informix version 9.4. We were able to create an OLEDB connection with SQL server 2000 and DTS. But, when trying to create an OLEDB connection using SQL server 2005 and SSIS, I am getting an error message. The connection is created successfully but cannot access databases and tables on informix. The error message when trying to load the Informix tables:
'Could not retrieve table information for the connection manager ....
'Ifxoledbc.e' failed with no error message available '
Your feedback is appreciated
Thank you,
Patrick.
View 1 Replies
View Related
May 15, 2007
Hi,
1. If I have millions of rows to be compared, then which cache type is prefereed for lookup, Partial or no caching?
2. If I have lookup connected to Oracle Oledb, cache type as partial and SqlCommandParam as following
select * from (SELECT ORDER_ID, OPER_KEY, STEP_KEY, SUM(OCCUR_COUNT) AS OCCUR_COUNT FROM SFWID_OPER_DESC_EXPLD GROUP BY ORDER_ID, OPER_KEY, STEP_KEY) refTable where refTable.ORDER_ID = ? and refTable.OPER_KEY = ? and refTable.STEP_KEY = ?
then it doesn't allow me to add the parameters from Advance tab of Lookup transformation edition, and raises following error
"Provider cannot derive parameter information and SetParametInfo has not been called"
what am I missing?
View 5 Replies
View Related
Jan 23, 2007
When I configure and test and OLEDB connection SQL Server 2005 keeps stopping with an error message as shown below. The problem seems to happen when I open the connection for ediing in Data Flow Window. There is a consistent pattern of errors (in there Event Log) relating to the Evnet Log prior to this error occurring.
Any idea what the problem is?
I have to say that my experience with SSIS has not been very encouraging so far.
Event Type: Error
Event Source: MSSQL$SQL2005
Event Category: (2)
Event ID: 17311
Date: 23/01/2007
Time: 2:06:41 PM
Description:
SQL Server is terminating because of fatal exception c0000005. This error may be caused by an unhandled Win32 or C++ exception, or by an access violation encountered during exception handling. Check the SQL error log for any related stack dumps or messages. This exception forces SQL Server to shutdown. To recover from this error, restart the server (unless SQLAgent is configured to auto restart).
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 9f 43 00 00 10 00 00 00 ŸC......
0008: 14 00 00 00 53 00 59 00 ....S.Y.
0010: 44 00 2d 00 4c 00 2d 00 D.-.L.-.
0018: 30 00 31 00 33 00 32 00 0.1.3.2.
0020: 36 00 5c 00 53 00 51 00 6..S.Q.
0028: 4c 00 32 00 30 00 30 00 L.2.0.0.
0030: 35 00 00 00 11 00 00 00 5.......
0038: 45 00 78 00 61 00 6d 00 E.x.a.m.
0040: 70 00 6c 00 65 00 48 00 p.l.e.H.
0048: 69 00 73 00 74 00 6f 00 i.s.t.o.
0050: 72 00 69 00 61 00 6e 00 r.i.a.n.
0058: 00 00 ..
View 1 Replies
View Related
May 28, 2008
hello,
I have an application wrote in Power Builder 11 and use OLEDB connection for SQL SERVER 2005 DB.
it works excellent till multiple users access the application. 2 seconds passes and locks appears and blocks all the DB!
I realy don't know what is the reason. In past I used SQL Native driver and it works well with the same application!!! (other reasons caused me to change the connection. not this).
Does someone can help me????????
View 3 Replies
View Related
Jun 9, 2006
I have OLE DB Connections set up in my connection manager (Native OLE DBMicrosoft OLE DB Provider for SQL Server). I would like to reference and query these connections from a custom task, written in C#. I currently reference it as follows:
using System.Data.OleDb;
...................................
OleDbConnection connection = (OleDbConnection) connections["MyConnection"].AcquireConnection(null);
What may be obvious to some (though wasn't to me, as I am new at this), when I run the task, I get an error saying that I cannot make this cast. After perusing the boards, I understand that this is because I am not making a cast to the right connection type. Well, that is where I am lost. What connection type (and corresponding library) do I need to reference? I want to continue to use the "Native OLE DB..." connection.
Thanks!
View 3 Replies
View Related
Feb 1, 2007
I am trying to set the connection string in a connection manager at runtime. Here is what I have done:
1. Created a gv_DataSource, gv_Username and gv_Password
2. Created a ForEach Loop that reads DataSource, Username and password values from a variable (it is an For Each ADO loop Enumerator). The ADO recordset is read into by an Execute SQL task before the loop.
3. Mapped values from the recordset to variable in the ForEach loop's "Variable Mappings" page.
4. Used the variables in my Sybase OLEDB Connection Manager's "Expression" property, setting the "ConnectionString" property to:
"Data Source=" + @[User::gv_DataSource] + ";User ID=" + @[User::gv_Username] + " ;Password=" +
@[User::gv_Password] + ";Initial Catalog=blue;Provider=Sybase.ASEOLEDBProvider.2;Persist Security Info=True;"
5. I set the values in my database table for the connection-I set 2 connections for which I have Sybase OLEDB datasources setup.
When I run the package, I just get the first server's data twice, it doesn't set the second server's data during the second loop. I made sure the first one was working (i.e. the ConnectionString's property was being set by the data from the current variables) by setting the variables incorrectly in the variable properties page, and then running the package. So the first row of connection information is working, but the second loop around it doesn't seem to be working. I used a msgbox in a script task to show that the variables are mapping correctly in the loop, so it seems the second time around the connection information isn't taking from the variables.
What am I doing wrong here?
Thanks,
Kayda
View 1 Replies
View Related
Mar 17, 2008
Greetings,
I have an SSIS package that I need to modify. It was developed in Visual Studio 2005 and runs faithfully in production on SQL Server 2005. Suddenly, I can't open the package on my own workstation. I see a big red "X" image and a message stating "Microsoft Visual Studio is unable to load this document." The real reason the document can't be loaded appears to be:
Error loading DataWarehouseLoader.dtsx: The connection type "OLEDB" specified for connection manager "Warehouse Logging OLE DB" is not recognized as a valid connection manager type. This error is returned when an attempt is made to create a connection manager for an unknown connection type. Check the spelling in the connection type name.
Does anyone know what causes this and what I can do? The package has been in production for 9 months and I've never seen this problem before.
Thanks,
BCB
View 10 Replies
View Related
Jun 28, 2007
Hi,
I have one database configured with the Recovery Model "Simple".
I am getting alot of full transaction log messages... is this supposed to happen?
Another question is:
Imagine i am in a middle of a big select into statement... and in another query i run the backup truncate log... am i going to loose information on the other batch ("select into?")??
Kind Regards,
Luis Simões
View 5 Replies
View Related
Jan 25, 2007
howdy,
i have a sqlserver2005 ssis package which connects to a mysql webserver to upload data. i am connecting via mysql oledb connection and am able to test connect ok through the oledb connection manager. However in my ole db destination editor i get an 0x80040E21 error when trying to preview a table . The full error is :
Error at Data Flow Task [Destination - Query [70]]: An OLE DB error has occurred. Error code: 0x80040E21.
Error at Data Flow Task [Destination - Query [70]]: Opening a rowset for "INFORMATION_SCHEMA.address_book" failed. Check that the object exists in the database.
------------------------------
ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC02020E8 (Microsoft.SqlServer.DTSPipelineWrap)
I can see all the tables in the drop down box in connection manager. This has been driving me nuts for the last 3 days! I have tried changing some of the security connection settings to no avail, (although i am not sure on what these do).I have also tried setting up as an odbc connection using script components but had memory errors after copying several hundred records and the package just hangs. I can go into this in more detail however i dont think they are related issues and i would prefer oledb as i dont have to script my data transfer.
any help much much appreciated.
thanks
View 3 Replies
View Related
Feb 28, 2008
Hi All:
I have a SSIS which have a main connection to a SQL Server 2005 DB, and also another connection to a Oracle database, and fetch data from the Oracle db.
I have the 2 connection managers, and everything runs fine when I test it in dev studio.
However, once I imported it to the DB, and run it on command line, I get the "Class not registered" error.
Log file as follows:
C:>dtexec /DTS "MSDB ST1INST101CRDA_D_GIM_CONN_TEST" /SERVER crpnycmsq34q /CONNECTION "CRD_CM";""Data Source=crpnycmsq34qST1INST101;Initial Catalog=CRD;Provider=SQLNCLI.1;Integrated Security=SSPI;"" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING V
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.3042.00 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 1:23:53 PM
Info: 2008-02-28 13:23:53.91
Code: 0x40016040
Source: CRDA_D_GIM_CONN_TEST
Description: The package is attempting to configure from SQL Server using the configuration string ""CRD_CM";"[dbo].[CMG_SSIS_CONFIG]";"GIM_SOURCE";".
End Info
Info: 2008-02-28 13:23:54.03
Code: 0x40016040
Source: CRDA_D_GIM_CONN_TEST
Description: The package is attempting to configure from SQL Server using the configuration string ""CRD_CM";"[dbo].[CMG_SSIS_CONFIG]";"GIM_USER";".
End Info
Info: 2008-02-28 13:23:54.05
Code: 0x40016040
Source: CRDA_D_GIM_CONN_TEST
Description: The package is attempting to configure from SQL Server using the configuration string ""CRD_CM";"[dbo].[CMG_SSIS_CONFIG]";"GIM_PWD";".
End Info
Error: 2008-02-28 13:23:54.55
Code: 0xC0202009
Source: CRDA_D_GIM_CONN_TEST Connection manager "GIM"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2008-02-28 13:23:54.56
Code: 0xC00291EC
Source: Execute SQL Task Execute SQL Task
Description: Failed to acquire connection "GIM". Connection may not be configured correctly or you may not have the right permissions on this connection.
End Error
Warning: 2008-02-28 13:23:54.58
Code: 0x80019002
Source: CRDA_D_GIM_CONN_TEST
Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 1:23:53 PM
Finished: 1:23:54 PM
Elapsed: 1.547 seconds
I DID TRIED MY BEST to search before posting, and most of them are having problem with 32 bit and 64 bit executions.
However, in my case, both are 32 bit (as shown in the log file).
In the above test, I'm setting DoNotSaveSensitiveData, and then fetch it with package configuration.
To make sure the package configuration is not creating pblm for me, I also tried to hardcode everything in the package, and then encrypt the whole ssis with password, and run the package with the /DECRYPT option, so that everything is already intact.
But I still get the same error. Log file as follows.
C:>dtexec /DTS "MSDB ST1INST101CRDA_D_GIM_CONN_TEST" /SERVER crpnycmsq34q /De "painful" /CONNECTION "CRD_CM";""Data Source=crpnycmsq34qST1INST101;Initial Catalog=CRD;Provider=SQLNCLI.1;Integrated Security=SSPI;"" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING V
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.3042.00 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 2:24:25 PM
Error: 2008-02-28 14:24:27.11
Code: 0xC0202009
Source: CRDA_D_GIM_CONN_TEST Connection manager "GIM"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2008-02-28 14:24:27.14
Code: 0xC00291EC
Source: Execute SQL Task Execute SQL Task
Description: Failed to acquire connection "GIM". Connection may not be configured correctly or you may not have the right permissions on this connection.
End Error
Warning: 2008-02-28 14:24:27.14
Code: 0x80019002
Source: CRDA_D_GIM_CONN_TEST
Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 2:24:25 PM
Finished: 2:24:27 PM
Elapsed: 1.422 seconds
Can anyone suggest what is missing ?? or what can be done ??
Any pointers are greatly appreciated.
Thanks,
- Henry.
View 18 Replies
View Related
Jun 23, 2006
Hi,
I have problem to extract data from DB2 table using SSIS dataflow task with OLEDB source selecting the data access mode with command. Here is the scenario.(Note:If I select the data access mode as a table then it works fine.)
If I use the data access mode as SQL Command then it is not working. i.e. the flow stays yellow in controlflow nothing happens in dataflow and I noticed the SQL dumper and proc completes. I couldn't find any log to verify the issue including the package execution results.Any of your thoughts will help me to resolve this issue.
Thanks..Mako
View 1 Replies
View Related
Sep 14, 2005
Please help someone from MSFT!
View 78 Replies
View Related
