Hi Guys,
We have a Sqlserver 2005 Installed on One of our servers.I wanted to know whether the installed database is a Evaluation copy or Licensed Copy.How to Evaluate this.
Do we have to check any Log files etc for knowing whether it is evaluation copy or Licensed copy.
Please help me Asap.
thanks in Advance
Regards
Arvind
We downloaded and installed the trial software of SQL Server 2005 Enterprise edition a month ago. We have purchased a fully licensed version of SQL Server 2005 Standard Edition and would like to apply the licensed version to our workstation clients since their SQL software will eventually expire. Our SQL Server is not an issue since we purchased a new Server and installed the new licensed version of SQL on it.
Is there an easy way to accomplish this or is an uninstall & reinstall of SQL on every workstation required?
Thanks,
ChrisB
I just received my licensed disks for upgrading my SQL Server 2005 Evaluation version to a fully licensed version. Do I simply run the two disks over top of the evaluation version or is it a little bit more complicated? Any input would be greatly appreciated. A little new to SQL.
Thanx
Chad
I am wondering if it is possible to change from SQL Server Enterprise Evaluation Version to Developer Version. The reason is because the Enterprise Evaluation version expires after 180 days. So if I create reports and cubes in Enterprise Evaluation I can import them into Developer Edition right? Should I remove the Enterprise Evaluation version after 180 days or leave it then install Developer Edition?
View 1 Replies View RelatedWant to upgrade Evaluation version of SQL 2005 to full retail version. How would I do that. Thanks very much for your hel
Sam Commar
Hi All,
I have been using the 180 day evaluation version of SQL Server 2005 Standard Edition and I have my license key now for the purchased version. I read on the Microsoft site I am able to upgrade to the non-trial version without uninstalling the eval version. But for Standars Edition Microsoft states:
"... If upgrading to the fully licensed version of SQL Server 2005 Standard Edition, Workgroup Edition, or Developer Edition, it is recommended that you uninstall the 180-day trial version of SQL Server 2005 Enterprise Edition before installing the fully licensed version of the other editions..."
Is there anyway out where I don't need to uninstall my eval database server?
If it is necessary to uninstall eval version, then what is the best way to preserve all my current databases?
Thanks,
Sumit
We have been using the 180 day evaluation version and I have my license key now for the purchased version. I read on the Microsoft site I am able to upgrade to the non-trial version without uninstalling the eval version. But it doesn't tell me HOW to do it. I was expecting a menu option, maybe on the About Screen of Management Studio to enter it. (How naive is that?) Is there a simple way to tell the Eval version I am now licensed?
TIA
Chris
I guess this is likely a stupid question, but I have no time for pride riht now...
I installed the evaluation version of SQL Server 7.0 and then installed the full version over top of the evaluation version once I received it.
My problem is that now SQL Server is telling me that the evaluation period has expired! How do I get around this? I assumed that installing a full purchased version would "convert" my installation of the evaluation version to a full version, but it hasn't. Please email with any information as I am trying to track this problem down and may not have time to check back here!
Thanks,
Robin Sarac
This will become a recommendation for my customer; we are struggling with performance on this new install which is temporarily done with the Evaluation version and I see a Service Pack has been published. Please advise?
View 4 Replies View RelatedHi everyone
I've just installed the microsoft's evaluation version of sql 2005 at my home computer.
Now i'm trying to connect ("sql sever management studio") but i dont know the server's name nor user name. I dont rememeber ever asked to produce any during the installation.
Bottom line- the evaluation version of sql server 2005 is installed but i cannot log in. How do i get to know my user name ? server name ? What ever i try i'm announced that the present version is not working for remote connections. I try to connect from the same very machine of the sql server. What is wrong ?
Thanks
I have had SQL2005 on a server for a very short period of time. Today I found that I am not able to execute an SSIS package in debug. It give me an error stating that the evaluation period has expired for data transformation services. I went to check the version by querying, but nothing happens when I click on the Server Management Studio link.
Has anyone seen this before or how long the trial version should last?
Does anyone know what version may have been installed on my server?
Thanks,
I know this is old database but when I download this evaluation from microsoft website, I got problem installing it. First, I unzip it. By default, it is unzip to C:SQLEVAL. Then, I went to install it. I don't which file I should click. So, I double click the autorun file. When I did that, there is a screen, I saw the screen saying "microsoft SQL Server 2000 Evaluation version". Then, I click "SQL Server 2000 Components"
Then, it comes to next page, and I click "Install Database Server". But after I did that, nothing happens! After I click again the same thing all over again, it says "Another instance of setup is already running".
I'm using Window XP Professional. Anyone encounter this problem before? I tried to re-download the file and reinstall but also the same problem. Really need help. Thanks.
HI All,
WE were using SQL Server 2005 Evaluation Edition having one user database created for application testing and also using reporting services for dashboard purposes.
Now our Evaluation period ended However we have already purchased SQL Server 2005 standard license for actual implimentation.
Can anyone guide me step by step how to seamlessly upgrade from evaluation version to the license version of SQL Server 2005 standard.
its somewhat urgent so i request quick help on this
Thanks in advance.
Hi
I have an sqlserver 2005 Enterprise edition (Evaluation version) installed on one of my servers.It got expired after 180days and now i want to transfer the database that was residing on that Evaluation version sqlserver to a new Development server.
Do we have any way to restore the database from a already expired Sqlserver trail version to a new Development server.
I dont want make an upgrade.
Please suggest me.
Regards
Arvind
HiWhen I attempt to install MS SQL Server evaluation copy (downloadedfrom Microsoft site) on Windows 2K Professional getting followingerror.Setup initialization error.The system cannot find the path specified.Source file or directory missing or cannot be read:'C:SQLEVALx86setup..Systemsqlunirl.dll'Please help.Regards,AG
View 1 Replies View RelatedI installed the evaluation copy remotely and wish to register the product by entering its product key, would that possible since I don't have the cd in the box.
Matt
Hi all,
I have downloaded Microsoft SQL Server 2005 Enterprise Evaluation Edition ISO from the following site and burned it onto a DVD.
http://www.microsoft.com/downloads/details.aspx?FamilyId=6931FA7F-C094-49A2-A050-2D07993566EC&displaylang=en
Prior to this I have installed Visual Studio 2005 Professional Edtion. During setup I have selected all the native client components i.e. Management Studio, Business Intelligense Studio. But after the install I am not able to see them under All Programs-> Microsoft SQL Server 2005. On further searching I have come across this link
http://channel9.msdn.com/ShowPost.aspx?PostID=142941
First of all, there is no sqlrun_tools.msi under setup folder of the dvd. And also when I tried to change component from Add/Remove programs and following the instructions as specified on clicking Change Installed components all that I see are: Connectivity Components and Software Development kit.
Could someone tell me how can I install Management Studio/ Business Intelligence Studio seperately? I don't want to go through the process of re-installation.
Is there any way to restore a database of higher version to lower version.
E.g. I have created a database in sql server 2012, created some tables & procedures in that.I took Full backup of that database. Can I restore it to sql 2008r2 or any lower version.
I know direct restore is not possible, I have to use either import or export option or generating script,but i want to know is there any easy step to do so.
Vimal Lohani
SQL DBA | MCP (70-461,70-462)
Hi all,
Since some analysis services features are only available in Enterprise version , I have to upgrade my SQL 2005 server from standard edition to enterpise edition.
So I uninstall originial standard version of analysis service and install a Enterprise version. However, the analysis service is still a standard version after installation.
Is it possible to keep data engine as standard version and install a enterprise version of analysis service?
Thank you very much
Tony
Hello,I have been searching and reading a lots of information on the microsoft website about the different version of SQL server, but still can not make my decision.In term of performance, is there a real big difference between the workgroup and the standard version? The workgroup is limited to 3 GB of RAM while the standard is unlimited, would that really change the performance if my server has 16Gb or RAM?The price difference is pretty substantial so if could only have to buy the workgroup , it would be better.One more question, regarding the type of licence, my server has 2 processors, could I avoid buying 2 licences and get the Server plus CAL instead. I am using this server to host 4 web-application running on SQL server. Each database is about 15 MB.Thanks in adavance for your advises.Arno
View 3 Replies View RelatedHi,
I have tried to attatch a database ,created by SQL server Express within a C# application , in SQL server 2005 Enterprise edition, but the following error message appears:
-----------------------------
TITLE: Microsoft SQL Server Management Studio
------------------------------
Attach database failed for Server 'MEDO'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft SQL Server&ProdVer=9.00.1187.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach database+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The database 'E:X.MDF' cannot be opened because it is version 611. This server supports version 607 and earlier. A downgrade path is not supported.
Could not open new database 'E:X.MDF'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 948)
------------------------------
so , how can I solve this problem , I need to reed the data resides in the tables of 'X' database , how can I do it?? please help me.
Thanks in advance for any help.
Aya.
I have an ssis package that downloads a SQL Server 2000 database and restores it to a SQL 2005 server. Ninety-five percent of the time it runs just fine, but every so often the job fails and I get the following set of error messages in the log file. (I have had to delete some of the proprietary information for this message to satisfy my boss like putting in [Database name] in place of the actual name of the database in the error message).
OnError, Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Converting database [Database name] from version 539 to the current version 611.
OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Converting database [Database name] from version 539 to the current version 611.
OnError,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Database [Database name] running the upgrade step from version 539 to version 551.
OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Database [Database name] running the upgrade step from version 539 to version 551.
OnError,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,The transaction log for database [Database name] is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,The transaction log for database [Database name] is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,RESTORE could not start database [Database name].
OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,RESTORE could not start database [Database name].
OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,-1073548784,0x,Executing the query "RESTORE DATABASE [Database name]
FROM DISK = '[Path to back up file]' WITH REPLACE,
MOVE 'ASP_Live_Data' TO [Path to MDF file],
MOVE 'ASP_Live_Log' TO [Path to LDF file]" failed with the following error: "RESTORE DATABASE is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,-1073548784,0x,Executing the query "RESTORE DATABASE [Database name]
FROM DISK = '[Path to backup file]' WITH REPLACE,
MOVE 'ASP_Live_Data' TO [Path to MDF file]',
MOVE 'ASP_Live_Log' TO [Path to LDF file]" failed with the following error: "RESTORE DATABASE is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
OnTaskFailed,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,(null)
Does anyone have any suggestions?
I have received the error message "Package migration from version 8 to version 6 failed".I have developed a SSIS package with Visual Studio 2013 which gives me PackageFormatVersion of 8. I then deploy my package to the ssisdb catalog that is running on a SQL Server 2012, this works fine but when I try to execute the package the error arises…due to SQL Server 2012 has a PackageFormatVersion of 6 and it can’t run something that has a greater version.I haven’t seen any good solution for this but one that would work for me would be to upgrade the Integration Services Server from 2012 to 2014, leaving everything else in 2012 (database, ssms, ssas, ssrs).Would this solve the package format problem? Would I then be able to execute my packages in the ssisdb catalog?
View 3 Replies View RelatedNow, I checked and verified that my backup version of SQL Server is the same as the version installed on the computer I'm restoring too.
I have SQL Server on a production machine that I backed up and want to test a full restore on a dev machine to make sure it will work when I need it to.
Now that I've run the restore command on my tape backup and go to restart the SQL server service I receive:
Configuration block version 0 is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.
I'm afraid I don't understand why this is happening. If the builds are the same, then shouldn't restoring the MASTER database have worked normally and I'd be able to restart the service now?
Any thoughts or suggestions?
We want to licence a trail version 2005 EN with an fullversion of MS Sql server 2005 EN. Is that possible?
Conworx
I have the trial version of SQL Server 2005 installed and have setup a couple of databases. This trial version will expire in another few weeks. I recently purchased a copy of the software and want to install it. Will I lose my databases, user info, etc? How do I go about installing without losing anything?
View 3 Replies View RelatedWe have a 64bit os machine that we accidently loaded the 32 bit version of sql server on. We now want to upgrade it to 64 bit sql server, but we now have a production database on it. My understanding is that all I have to do is detach the production database, upgrade to 64bit sql server, then reattach the database. Is this really all I have to do?
View 4 Replies View Related
I started this thread as the last attempt to sort the issue out.
I have an SSIS package that loads data from a .csv file into my database. It works fine on my developer machine. I start it programmatically or from Management Studio or from Visual Studio, and it works. Then I deploy it to the MSDB database on the computer on which it will have its final place. There again I can start it from Management Studio or from Visual Studio (using the source file), and it works. But when I start it programmatically, it just fails telling me:
Package Warnings:
Package Errors:
The version of component "****" (11773) is not compatible with this version of the DataFlow.
Component "component "Derived Column" (13627)" could not be created and returned error code 0x80070005. Make sure that the component is registered correctly.
The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "Flat File Source;Microsoft Corporation;Microsoft SqlServer v9; (C) 2005 Microsoft Corporation; All Rights Reserved; http://www.microsoft.com/sql/support;1".
component "Agreement File" (11773) failed validation and returned error code 0xC0048021.
One or more component failed validation.
There were errors during task validation.
Maybe the source of the problem is that this machine is a 64-bit one, while the developer machine is 32-bit one. But why does the package run fine when I start it from Management Studio?
Any help would be appreciated.
FMikee
Can some one here give me more insight about how to upgrade a SQL Server 2005 Standard Version (32 bits) to a SQL Server 2005 Enterprise Version (32 bits) as default instance on a Windows 2003 enterprise OS (32 bits). I want to know what is the easist way and what is the safest way. May I preserve some settings I have for the STD version, or I have to start from strach again to configure the server? Is there any catches, anything I should have attention to (We are using heavily about CLR and fulltext indexing)?
Thanks a milliom
Ning
Hello,
I installed the SQL Server 2k EnterPrise version and developer version on the same version, and the developer version is an instance "Development".
How do I expose both of them to internet? Just open both of them to port 1433? And on the client side, just say IP and IP/Development? Do I need specific set up, will they conflict?
Thanks,
The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'C.0.8.54'. the expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights. I'm getting this whenever try to access the report server via SSMS, I have tried to upgrade via the Reporting Service Configuration Manager but get an error message similar to above except it says: The database version (C.o.8.54) does not match your Reporting Services installation. This version of the database cannot be upgraded. You must use a different database. Has anyone seen this before? I can create a new database, but don't want to loose all my reports. Any ideas. Oh, not even sure if the backups exist from before this error, I've spent 2 weeks trying to get access to the server so I could try to upgrade, only to get the above results. Thanks for your help, David
View 5 Replies View RelatedI downloaded the 101 Samples installation (i.e. 101SamplesCS.msi) from Microsoft's website, which contains SQL Server database files.
While working with the databases in the "Data Access" samples from the 101 Samples projects, I get the following error:
"Database <mdf_name> cannot be upgraded because its non-release version (600) is not supported by this version of SQL Server. You cannot open a database that is incompatible with this version of sqlservr.exe. You must re-create the database..."
I assume the database files were created with a beta or CTP version of SQL Server 2005. Does anyone know where I can get an updated version of these database files or scripts to update them?
Please help.
Mike.
Hi everyone,
I installed SQL 2005 server, evaluation version on my personal computer.
Now i try to log in but i'm requested for the "server name". How do i know the server name?
I tried "localhost", "local", my computer name but nothing worked ?
can anyone help me with that ?
Thanks