every 1 hour my server's computer is restarting !
when the windows finish restarting i open the Event viewer and see that what coused it is the error :
"Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database."
Event 107
source : "Report Server Windows Service (MSSQLSERVER)"
How can i solve it ?
Hi
I am in weired move kindly help me out..I created report using sql server 2005 Reporting services..At one stage it is working fine with proper parameter but due to bad input parameter my report goes in hang mode..so i went to my DB server and restart my reporting service and then MSSQLSERVER I dont remember sequence (may be vice versa) now I am not able to get report when i am passing right parameter..I went to google and only I came to know that due to sequence of restart of services will cause this error..
error like..Application error:
Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Syste error:
The SQL Server Integration Services service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Kindly help me out.
T.I.A
This error is being displayed in the eventlog every minute. Any ideas on what it is referring too? I reviewed some posts but most point to specific problems of report server not running, or receiving this error during a run. We are receiving no errors at all. However this is jamming up the event viewer to make troubleshooting other issues very diffucult.
Event Type: Error
Event Source: Report Server Windows Service (MSSQLSERVER)
Event Category: Management
Event ID: 107
Date: 3/23/2007
Time: 8:20:16 AM
User: N/A
Computer: SPECTRUM_DB2B
Description:
Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I am running SQL Reporting Services and SQL Server 2005 on a Windows 2003 server. The configuration has been unchanged for approx. 3 weeks. Suddenly today, reports being accessed via an ASP.NET 2.0 application (on Windows 2003 Server with IIS 6) using a SOAP call to the reportserver became inaccessable. End users received the following error:
Message: An error occurred during rendering of the report. --->
An error occurred during rendering of the report. --->
An error occurred during rendering of the report. --->
An error occurred during rendering of the report. --->
Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Stack Trace: at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at IFA.CAP.SQLReportingService.ReportingService.Render(String Report, String Format, String HistoryID, String DeviceInfo, ParameterValue[] Parameters, DataSourceCredentials[] Credentials, String ShowHideToggle, String& Encoding, String& MimeType, ParameterValue[]& ParametersUsed, Warning[]& Warnings, String[]& StreamIds) in C:ApplicationsIFACAPWeb ReferencesSQLReportingServiceReference.vb:line 1319
at IFA.CAP.BusinessObjects.Reports.Certificate(Int32 certificateID, Boolean isDraft, Boolean isCertified) in C:ApplicationsIFACAPBusinessObjectsIFA.CAP.BusinessObjects.Report.vb:line 551
at IFA.CAP.CertificateDetail.PrintCertificate(Object sender, EventArgs e) in C:ApplicationsIFACAPMainCertificateDetail.aspx.vb:line 2287
Subsequently, the following error is logged on the Report Server/Database server:
Report Server (MSSQLSERVER) cannot connect to the report server database.
I was able to temporarily correct the problem by performing as iisrest on the Report Server/Database server. However, the same problem occured again a couple hours later. I am relatively new to SQL Reporting Services so any help would be appreciated.
MDJ
Hello Reporting Services 2005 users or Reporting Services Team,
I have done everything to get pass this error but no luck.
My setup is :- WIndows 2003 Standared Edition SP1
Sql Server :-
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
Reporting Services starting SKU: Standard.
From the Reporting Services Configuration Manager:
I can see all other things configured except Encryption Keys(blue sign)
Initialization(Grey sign) and Execution Acct(Yellow sign)
My windows Service Identity is using :
NT AuthorityNetworkService
Builtin Acct :NetworkService
Web Service Identity :-
ASP.NET Service Acct :- NT AuthorityNetworkService
DataBase Setup :- Credentials Type :- Service Credentials
I have also done everything from here thanks to Göran
http://stevenharman.net/blog/archive/2007/03/21/Avoiding-the-401-Unauthorized-Error-when-Using-the-ReportViewer-in.aspx
and
http://support.microsoft.com/default.aspx?scid=kb;en-us;896861
and
http://forum.k2workflow.com/viewtopic.php?t=619&
If you guys any solution for this please let me know.
I was wondering could this be a scale-out deployment issue ?
I also get the error when setting up the DataBase Setup :
Although saving the database connection info succeeded the The report server cannot access internal info about this deployment to determine whetherthe current con fig is valid for this editionThis could be a scale-out deployment and that the feature is not supported by this editionTo continue use a diff report server database or remove the encription keys
My Error log file is below:-
w3wp!webserver!5!16/05/2007-14:52:46:: i INFO: Reporting Web Server started
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing ConnectionType to '0' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!resourceutilities!5!16/05/2007-14:52:46:: i INFO: Reporting Services starting SKU: Standard
w3wp!resourceutilities!5!16/05/2007-14:52:46:: i INFO: Evaluation copy: 0 days left
w3wp!resourceutilities!5!16/05/2007-14:52:46:: i INFO: Running on 1 physical processors, 2 logical processors
w3wp!runningjobs!5!16/05/2007-14:52:46:: i INFO: Database Cleanup (Web Service) timer enabled: Next Event: 600 seconds. Cycle: 600 seconds
w3wp!runningjobs!5!16/05/2007-14:52:46:: i INFO: Running Requests Scavenger timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!runningjobs!5!16/05/2007-14:52:46:: i INFO: Running Requests DB timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!runningjobs!5!16/05/2007-14:52:46:: i INFO: Memory stats update timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!library!5!05/16/2007-14:52:48:: i INFO: Call to GetPermissions:/
w3wp!library!5!05/16/2007-14:52:48:: i INFO: Catalog SQL Server Edition = Standard
w3wp!library!5!05/16/2007-14:52:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server.
w3wp!library!5!05/16/2007-14:52:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server.
w3wp!library!5!05/16/2007-14:52:49:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server.
w3wp!library!5!05/16/2007-14:52:49:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server.
Hello,
I am my department's Sys Admin and a relativelty Noobie when it comes to SQL server. So I recently Installed SQL Server 2005 on a Win2003 Server. During install I set my domain account as the service account login. After the DB and Web Application were setup and running good I realized that the SQL service accounts were logging in as my domain account. Not a good thing right? So in SQL Server Configuration Manager I changed the services from logging on as my domain account to the local system account instead.
Enter the problem: now I notice in application event viewer the Report Server Windows Service is erroring every minute. The error reads "Report server windows service cannot connect to the report server database." Im sure this was caused by me changing what account the report server service logs in as and local system account not having appropriate permissions. So what account should the report server windows service log in as? I see where to change the windows report service identity in Configure Report Server but I am not able to backup an encryption key? Thanks in advance!
i want to check.. Report Server Windows service has Send As permissions on the SMTP server.
how can i do this..
I have a test server running both 2000 and 2005 Reporting Services. Each day I have to restart the Report Server Windows service for the 2005 Report Server. This is the error I get when I try to access the Report Manager
The Report Server Windows service 'ReportServer$TSQL4' is not running. The service must be running to use Report Server. (rsReportServerServiceUnavailable) Get Online Help
After I start the Report Server Windows service using the Report Services Configuration tool I can access the 2005 Report Manager without errors. The windows service start up type is set to automatic.
I can not find why the 2005 version keeps going down.
Hello Everyone,
I have a Report Server setup on my laptop (XP Pro SP2). I have developed a report which I would like to view from a Windows Forms Application (VB.NET) using a ReportViewer. When I try it from the local machine it works correctly, but if I try to connect and preview the same report from my other PC (Vista Home Premium) I am getting the "Unable to connect to the remote server. A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because the connected host failed to respond." error.
I have setup the Processing mode to Remote and correctly setup the ReportPath and ReportServerUrl using:
With rptRetEmp
.ProcessingMode = Microsoft.Reporting.WinForms.ProcessingMode.Remote
.ServerReport.ReportServerUrl = New Uri("http://192.168.1.2/CPMReports")
.ServerReport.ReportPath = "/CPM_Reports/Test"
.ServerReport.Refresh()
.RefreshReport()
End With
Where CPMReports is the Report Server virtual directory and CPM_Reports is the folder where the report Test resides.
I do not know if this has anything to do with the fact that Vista Home does not have Report Services enabled or it is just a permissions problem. I have red several posts that describe similiar problems, but I could not find a solution.
Thank you for your help.
Daniel D.
hi all,
i have SQL 2205 with SP1 installed on my machine.
and i m not bale to connect to Report Server using SQL management studio as well as from web.
i have installed reporting server and database on same machine. i tried using
"http://localhost/reportserver"
"http://localhost/reports"
"http://localhost/reportmanager"
but i am not bale to connect i am getting "Service Unavailable" page.
and when i try to connect using SQL Management Studio with "servername/instance" as well as "http://localhost/reportserver" i am getting a error saying.
===================================
Cannot connect to http://localhost/reportserver.The request failed with HTTP status 503: Service Unavailable. (Microsoft.SqlServer.Management.UI.RSClient)
===================================
but if i try and connect to other reporting server on other machine using web http://servername/reportserver i m able to connect it.
but dont know whats the problem on my machine.
do i need to start any services for this...
so anybody knows how to troubleshoot this issue.
Thanks in advance...
SQL server 2005 express reporting problem.
error message:
This feature "remote access to report data sources and/or the report server database" is not supported in this edition of reporting service
I got this error message when I try to connect to database hosted in another PC running SQL server 2000.
Is it true that SQlL server Express can only use Local Database Engine to host the database?
Hi,
I have created and deployed a data source (which uses "Credentials supplied by the user running the report") and a model which uses this data source.
Also I have built a report using Report Builder and all works well.
Now I wish to use Visual Studio to build a report, so I'm trying to create a data source from my computer which the report should use and I want it to use the model on the remote server. In the Report Wizard I am using "Report Server Model" and the following connection string:
Server="http://<remoteserver>/reportserver";datasource="/Models/MyModel"
IHowever I can't make the credentials to work. I've tried them all with no luck. What username/password must I use? Because so far nothing of what I have tried works.
Any help is highly appretiated.
Kind Regards,
Robert
Hi My project is in .NET 2003 i.e. framework 1.1 and database in SQLServer 2000. But the reports have been developed using SQLServer 2005 Reporting Services. Now when I am trying to deploy them through deployment project of .NET its giving me following error:"Using other editions of SQL Server for report data sources and/or the report server database" is not supported in this edition of Reporting Services. Now I am really confused with this. Can any one please guide me regarding this ASAP. Thanks, Falguni
View 4 Replies View Related
Hi every one,
I'm very new new at this. I'm try to deploy a report model and got this message. I have no idea what its going on about.
Can anyone help me?
Aku
------------------------------
System.Web.Services.Protocols.SoapException: The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) ---> Microsoft.ReportingServices.Diagnostics.Utilities.RPCException: The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) ---> System.Exception: The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) ---> System.Exception: The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) ---> System.Exception: The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) ---> System.Exception: The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) ---> System.Exception: Bad Data. (Exception from HRESULT: 0x80090005)
--- End of inner exception stack trace ---
--- End of inner exception stack trace ---
--- End of inner exception stack trace ---
--- End of inner exception stack trace ---
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.Diagnostics.DataProtection.ProtectData(Byte[] unprotectedData, String tag)
at Microsoft.ReportingServices.Library.ConnectionManager.ConnectStorage()
at Microsoft.ReportingServices.Library.Storage.NewStandardSqlCommand(String storedProcedureName)
at Microsoft.ReportingServices.Library.DBInterface.GetAllConfigurationInfo()
at Microsoft.ReportingServices.Library.RSService.GetSystemProperties(Property[] requestedProperties)
at Microsoft.ReportingServices.WebServer.ReportingService.GetSystemProperties(Property[] Properties, Property[]& Values)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.WebServer.ReportingService.GetSystemProperties(Property[] Properties, Property[]& Values) (System.Web.Services)
------------------------------
BUTTONS:
OK
------------------------------
I would like to know if it is possible to have different applications on separate report servers sharing one report server database. If so are there possible issues or ptfalls to this type of architecture?
Thanks,
thecoleman
Hello,I hope you guys can help me with a problem that I am facing...I have started the MSSqlServer service and SQLServerAgent serviceswith a domain username and password.There are periodic password resets to this user. Security policieswithin the company dictate that the password for this domain accountcannot be permenant.Would there be any way to automatically reset the pwd in theseservices instead of manually changing them each time?Thanks
View 1 Replies View RelatedHi!
I understand that this topic is one of the most discussed topics ever. However i could not find the relevant information after going through (almost) all the posts so far. Hence this post. I am getting the 'SQL Server does not exist or access denied' error when I am trying to access SQL Server from a WINDOWS SERVICE. SQL Server and the Windows service are running on two different machines. (When they are on the same machine, it works). All the solutions I found so far are related to web apps. What should I do in the case of a windows service? My connection string uses SQL server authentication. (I tried with windows authentication. Its not working either.). Under what login does windows services run and how can I add it to valid SQL server logins?
Hallo there,
I just upgraded from Windows XP Pro to Windows Vista Bussiness and tried to reinstall SQL Server 2005 Developers Edition. After the installation i downloaded (using microsoft windows update) and installed all the service packs for sql and vista available.
My problem is when i open sql server management studio and try to connect to my default instance using windows authentication and database engine, an 18456 error occurs.
I enabled all the protocols and all the ports
I disabled windows firewall and antivirus (eset nod32)
I installed all service packs available
I have also installed Visual Studio 2005 without installing sqlexpress
But nothing happens!
Please i am very desperate, any information will be gratefully accepted.
This is my installation Information
Code Snippet
Microsoft SQL Server Management Studio 9.00.3042.00
Microsoft Analysis Services Client Tools 2005.090.3042.00
Microsoft Data Access Components (MDAC) 6.0.6001.18000 (longhorn_rtm.080118-1840)
Microsoft MSXML 3.0 5.0 6.0
Microsoft Internet Explorer 7.0.6001.18000
Microsoft .NET Framework 2.0.50727.1434
Operating System 6.0.6001
Thank you in advance,
Patonios
Hi i have used
http://msdn2.microsoft.com/en-gb/library/ms160724.aspx
to enable custom security in the report server,now custom security sample is working fine with my report server,
So bigger problem is my Software manager ask me to redesighn
UILogon.aspx page ?
Now the bigger problem is when redesign the UILogon.aspx page
I am having lot of problems in the sample ,thing is i cant get any button event from the
code behind it self ?
Error is saying that
"cannot handle Event 'Public Event Click(sender As Object, e As System.Web.UI.ImageClickEventArgs)' because they do not have the same signature."
Whats is the wrong with this ?
regards
sujithf ?
Hello,
I've created a Report Model Project that can be used by Report Builder to generate ad-hoc reports. I'm trying to create a connection string in my Report Server Project that points to the Report Model Project data source view.
All I can do is create a regular datasource, which bypasses the metadata contained in the Data Source View.
Basically I want my Report Server Project and my Report Builder reports to leverage the same metadata. Is this possible? If so how do I get the connection string?
Thanks!!
-Matt
Hi
I went to my comp ->rt cick->manage-IIS->default website->rt click->properties->directory security->annoymouse access€¦EDIT->under Default domain it was blank, and i added a domain there.
And i was getting error opening up the reports from localhost.
I changed everything to same as it was previosly, and I am getting the error:
The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. (rsReportServerDatabaseUnavailable) (rsRPCError) Get Online Help
Cannot open database "ReportServer$SQLExpress" requested by the login. The login failed. Login failed for user 'NGESComputer name$'.
Hi.
I wonder if it is possible to set forms authentication for report manager but leave report server "as it is". I need to authenticate users from external LDAP and can't use windows authentication for report manager, but I would also like to leave report server open for anonymous users. In that way authenticated administrators could create reports which anonymous users could read.
I tested the Security Extension Sample and got it working when I rewrote the authentication part with my own LDAP authentication.
If I have understood correctly, the report manager is just application inside report server so is it possible to use forms authentication with one application but still leave the report server with Windows authentication?
Hi,
I am having a problem connecting my .net applications from the application server to the database server. When I run the application from my windows xp (sp2) box it works fine. When I try to connect via SQL Management Studio to the database server from the application server I get the same error.
Here is the error:
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Here is the Environment:
App Server:
Windows Server 2003 Standard Edition
Inside Company's Firewall/ Network
Database Server:
Windows Server 2000 Advanced Edition
SQL Server 2000 SP4
Remote Connections to the Server is checked
Enable Protocols: Named Pipes & TCP/IP
TCP/IP Port: 1402 (I don't know why it isn't the default of 1433)
The db server is sitting out side the Company's firewall (don't ask me why). I can access it fine from inside the firewall on my XP box but not from windows server 2003. There is a web server outside the our network that also connects to the db server with no problem and that is running Windows Server 2003 Web Edition.
I can ping the db server from the app server using the IP address.
I tried using the IP address and the port 1402 in my connection string but that didn't work from any machine (XP and Server).
I imagine the issue is somehow related to the company's firewall but why would it only block Windows Server 2003 and not XP?
What do I tell the network admin to change?
Any help would be appreciated.
Thanks,
Oran
Hi,
I am newbie and working with an application that ueses report server 2000 to make reports.
The problem is somebody has moved the database and changed some acounts and now I can not either get any report from the server or install my changes for reports. I used to run this commando to install changes for reports:
rs -i PublishGeckoReports.rss -s http://IpAddress:32808/reportserver -v definitionPath="C:TempDeploymentReportsRDL" -v targetFolder="/MyReports"
here is the error message i get when i try to install:
System.Web.Services.Protocols.SoapException: The report server cannot open a connection to the report server database. The logon failed
when I browse to http://IpAddress:32808/reportserver I get following:
The report server cannot open a connection to the report server database. The logon failed. (rsReportServerDatabaseLogonFailed) Get Online Help
Logon failure: unknown user name or bad password.
at IIS Manager for default web site Enable Anonymous Access is checked and on the database server and the web.config file use same account and password.
but I heard that somewhere there is encrypted password that i have to change it too.
I need your help
Thanks
Hi,
I got consistent error of the following:
ReportingServicesService!runningjobs!13!1/3/2007-10:45:21:: e ERROR: Error in timer Database Cleanup (NT Service) : Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerDatabaseUnavailableException: The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. ---> System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.ReportingServices.Library.ConnectionManager.OpenConnection()
--- End of inner exception stack trace ---
The error happens on Reporting Service version 9.00.3017.00 (the version we are running in Production). The Reporting Service and its database are actually resided in the same physical server. And the strange thing is that it does not prevent any functionalities or features working except when I launch the Management Studio on that server, it usually takes 2 minutes to load up. (any other server would just take 5 -10 seconds).
Can any one help?
Thanks!
William.
I am getting the following error, when trying to deploy. the report should point to a server which is in my network, but the report is on my machine. where i am trying to deploy locally but point to a different machine.
******************************************************
The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing.
***********************************
Thank you very much for the information.
Hello,
View 14 Replies View RelatedI'm using SQL Express with Advance Services & I get this error when I try to deploy my reports. Why do I get this error
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'EDPSYS'. (rsErrorOpeningConnection)
The feature: "Remote access to report data sources and/or the report server database" is not supported in this edition of Reporting Services. (rsOperationNotSupported)
Justin Song
Can't connect to local server instance MSSQLSERVER in SQL Server Management Studio (SQL2005 sp2/Vista).
SQL Server Configuration Manager reports SQL Server2005 services: SQL Server (MSSQLSERVER) Running. This would indicate the name of the SQL server is "MSSQLSERVER" correct? I chose "default" instance during the install and that is the name it gave itself.
I tried connecting to the server using the following for the Server Name: MSSQLSERVER and .MSSQLSERVER neither works.
The only thing that works for my installation is just plain "." (no quotes) and nothing else. Can this be correct because I can't find any reference to this. Thanks.
View 1 Replies View Related
Hello,
I moved the web app. I'm working on to another machine. Everything seemed to go well. Installed Reporting Services and configuration worked well with green ticks everywhere and I'm running reports in Report manager and in Visual Studio. However running off the web app. gives the message:
"The attempt to connect to Report Server failed" - there's also a ref. to an HTTP 404 error.
In RSWebApplication.config I have :
<ReportServerUrl></ReportServerUrl>
<ReportServerVirtualDirectory>ReportServer</ReportServerVirtualDirectory>
and in RSreportserver.config I have:
<UrlRoot><server IP>/Reportserver</UrlRoot>
The install might not have gone as well as I thought because there was a "ReportServer" website created in IIS at same level as default. (Also Reports and ReportServer as virtual directories under Default website). The rogue website is 'stopped' at present. Would be grateful for any help with this. One thing is that I'm now behind a proxy so I'm using localhost:8080
Hi All,
I have a brand new install of sql server 2005 on brand new WINDOWS SERVER2003 with latest versions. Every thing works fine excepting I get a 404 when I connect to report server from management studio..
I am even able to publish reports and all the
url://localhost/reportserver
url://localhost/reports
url://localhost/reportserver/reportbuilder/reportbuilder.application
all work fine on local machine and with in the network behind the fire wall.
But when I try to connect to report server using management studio on the local server or remote server, I get the following error.
"
TITLE: Microsoft SQL Server Management Studio
------------------------------
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
ADDITIONAL INFORMATION:
The request failed with HTTP status 404: Not Found. (Microsoft.SqlServer.Management.UI.RSClient)
"
More techinal details
"===================================
Cannot connect to xxxxxxxxxxxx.
===================================
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
Program Location:
at Microsoft.SqlServer.ReportingServices2005.RSConnection.MissingEndpointException.ThrowIfEndpointMissing(WebException e)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.SqlServer.Management.UI.RSClient.RSClientConnection.CreateConnection(String connectionString)
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.CreateConnectionObject()
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.RSTypeImpl.GetConnectionObject(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.RSType.GetConnectionObject(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The request failed with HTTP status 404: Not Found. (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
Program Location:
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
"
Any help would be greatly appreciated.
Bob
hi all
i get the following message error when installing sql server 2005 express :
<< sql server setup could not connect to the database service for server configuration the error was :[microsoft][gestionnaire de pilotes odbc] source de données introuvable et nom de pilote non spécifié >>
is there any help
thanks and best regards