I see this error message on one of my servers Event Viewer..Can anyon tell me what it means and how to resolve it..
The library file "C:WINNTSystem32BEPerfDll.dll" specified for the "Backup Exec" service could not be opened. Performance data for this service will not be available. Status code is data DWORD 0.
Can anyone tell me what this warning message in the Quotes below... I get this on one of our servers every 15 minutes in the event Viewer..
Here is the message in the event Viewer.. "Replication of license information failed because the License Logging Service on server PSNJRPDC could not be contacted."
How do I prevent SQL Server 2000 from posting successful backupcompletion messages to the Windows 2000 Application Event Log?I have scheduled jobs which backup my transaction logs on 50+ databasesand it always writes to the Windows 2000 application event log uponcompletion.Due to the frequency of the jobs it only takes a day for theApplication Log to fill up, which is causing other jobs to get hung upwhen trying to write to it. On my Windows 2000 server, I have theapplication log event viewer setting correctly set as:"When maximum log size is reached - Overwrite events as needed" but forsome reason this setting no longer applies like it did for the pastthree years. SQLServerAgent and MSSQLSERVER both run under a localAdmin account, without a domain.When I researched how prevent SQL Server from logging this type ofmessage, I found that I can use sp_update_alert to disable thismessage, but I cannot findthe message_id to correctly disable this message. In sysmessages, themessage I am trying to suppress iserror:18265severity:10dlevel:128description:Log backed up: Database:%1, creation date(time): %2(%3), first LSN: %4, last LSN: %5, number ofdump devices: %7!d!, device information: (%8).mslangid:1033I tried calling sp_update_alert as follows:exec sp_update_alert @name = 'Log backed up: Database: %1, creationdate(time): %2(%3), first LSN: %4, last LSN: %5, number of dumpdevices: %7!d!, device information: (%8).', @enabled = 0but got the error message:Server: Msg 14262, Level 16, State 1, Procedure sp_update_alert, Line105The specified @name ('Log backed up: Database: %1, creation date(time):%2(%3), first LSN: %4, last LSN: %5, number of dump devices: %7!d!,device inf') does not exist.Looks like it can only handle 128 characters.How can I disable this message from being logged in the ApplicationLog? Or alternatively, how can I get the event viewer to behave asexpected and"Overwrite events as needed"?Thanks,Mike Orlando
I have almost finished to design my Service Broker application and I found out something strange.
I was tring to handle the Target queue disabled scenario, because I want to save to message that was not sent so I can create an alert to the user to say that some messages as not been sent.
To disable to queue I run:
Alter queue [dbo].[Receivedqueue] with status = off
I had the Event Viewer in front of me and I have seen the suddenly it appeared a lot of this informational events:
Description: The activated proc [dbo].[OnReceived] running on queue TestReceiver.dbo.Receivedqueue output the following: 'The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction.'
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
What this message means?
I would like to avoid to have it because it appears a lot of time and I don't want to fill up my Event Viewer!!
I don't know of it is important but in the moment I executed the code there was not CONVERSING conversation and all the queues were empty.
Somebody has seen this error before or I have to send to the forum the [dbo].[OnReceived] code as well?
I have a stored procedure that I use for call a aspx page from within SQL. The stored procedure itself runs finewith no errors but I keep getting errors in the event viewer everytimeit runs (with .vbs, .NET, .vb6 client) outside Enterprise manager or SQL Query Analyzer.....This is error:Error: 0, Severity: 19, State: 0SqlDumpExceptionHandler: Process 52 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.I think that this is the same problem seen inhttp://www.sqlmonster.com/Uwe/Forum...in-Event-ViewerI've test with XP sp2, W2003 server, SQL 2000 sp3a......on the same machine.ANY SUGGESTIONS??????Thanks--Message posted via http://www.sqlmonster.com
We have a database at a network location that we allow many of our employee's to access. They all have the same settings however a few of them return a Failure Audit in System event viewer log occasionally. It is not every time they access the database. Below is a copy of the details. Any ideas what could be causing this?
On the SQL Server the Event Viewer shows the same messages and errors every evening between 22:05:00 and 22:08:00. The following information messages are shown for every database:
"I/O is frozen on database <database name>. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup."
"I/O was resumed on database <database name>. No user action is required."
"Database backed up. Database: <database name>, creation date(time): 2003/04/08(09:13:36), pages dumped: 306, first LSN: 44:148:37, last LSN: 44:165:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'{A79410F7-4AC5-47CE-9E9B-F91660F1072B}4'}). This is an informational message only. No user action is required."
After the 3 messages the following error message is shown for every database:
"BACKUP failed to complete the command BACKUP LOG <database name>. Check the backup application log for detailed messages."
I have added a Maintenance Plan but these jobs run after 02:00:00 at night.
Where can I find the command or setup which will backup all databases and log files at 22:00:00 in the evening?
My boss has now decided that he doesnt want to see SQL errors in the event viewer, unless they are actual errors.
The two errors are: A - When the DB log is truncated it goes into the event viewer as an error. This needs to either not go into the event viewer at all, or be classed as something other than an error.
B - "Sqllib error: Database x is not simple." This one I dont even know what causes it, but the same thing applies, either it shouldnt be logged, or it needs to be logged as something other than an error. Although what does cause this message?
i am puzzled on how to decipher the below msg on my sql server Had tried adjusting the settings but apparantly doesnt work
is this due to my license or what other reasons?
Error msg: 17052 : This SQL Server has been optimized for 8 concurrent queries. This limit has been exceeded by 30 queries and performance may be adversely affected.
Hi for everyone! I need any example to use raise error that write into event Viewer I use WITH LOG directive but it's no success. Sincerely. FAin Boris
I'm in the process of verifying that all functionality in a version 6.5 database is still there in SQL 7.0. After the upgrade, one issue seems different.
When I attach to a SQL 6.5 database, the full username used in the connection is displayed in the Windows NT Event Viewer. But when I attach to the same database in SQL 7, the username shows up in the Event Viewer as 'N/A'. I've verified that audit permissions are set the same on both boxes both under SQL and in User Manager. Any ideas??
Is there a way to handle an event when the report viewer has completed loading the report? I have handled the report viewer load event but also want to handle an event for when it has completed loading.
I am wanting this because the "report is being generated" message is far off of the screen when I use a large report viewer.
So, on page load I simply make a textbox visible that says "report is being generated". When it completes generating the report, I want it to make that message invisible.
The disposed and unload events don't seem to handle this correctly.
Hi everyone, I was wondering how do for 'Log Events' info going to Event Viewer Windows visor. Is it possible or it's just only private info for you SSIS.
Server 2003 SE SP1 5.2.3790 Sql Server 2000, SP 4, 8.00.2187 (latest hotfix rollup) We fixed one issue, but it brought up another. the fix we applied stopped the ServicesActive access failure, but now we have a failure on MSSEARCH. The users this is affecting do NOT have admin rights on the machine, they are SQL developers. We were having
Event Type: Failure Audit Event Source: Security Event Category: Object AccessEvent ID: 560 Date: 5/23/2007 Time: 6:27:15 AM User: domainuser Computer: MACHINENAME Description: Object Open: Object Server: SC Manager Object Type: SC_MANAGER OBJECT Object Name: ServicesActive Handle ID: - Operation ID: {0,1623975729} Process ID: 840 Image File Name: C:WINDOWSsystem32services.exe Primary User Name: MACHINE$ Primary Domain: Domain Primary Logon ID: (0x0,0x3E7) Client User Name: User Client Domain: Domain Client Logon ID: (0x0,0x6097C608) Accesses: READ_CONTROL Connect to service controller Enumerate services Query service database lock state
I am developing a package on my local workstation. I have defined two logging service providers. One is for SQL Server and the other is for the Windows Event Log. I am using the Dts.Log method in a script task to write log entries.
Logging is working properly with the SQL Server provider and rows are being inserted into the sysdtslog90 table. However, the only events that are being logged in the Windows Event Log are the package start and end events which I believe SSIS is doing automatically anyway.
Is there something I need to do to enable WIndows Event Log logging other than defining a log provider and making sure it is checked active? Won't SSIS write to two different logs with one Dts.Log call? Any ideas on what might be going wrong with my approach?
I have been trying to drill down to the cause for this event log message: "The configuration of the AdminConnectionTCP protocol in the SQL instance SQLEXPRESS is not valid." It is reported from the SQLBrowser service as a warning when the service starts. I have tried starting SQLBrowser.exe with -c flag, but the output reveals no errors. I have seen this error on three computers. Two are running SQL 2000, 2005 and Express. One was only running Express, but still this message. I then looked into the log for the SQL Express server itself. It shows this message on startup: "Dedicated administrator connection support was not started because it is not available on this edition of SQL Server. This is an informational message only. No user action is required." Now, it appears to me that these two messages may relate to the same "error" (or rather behaviour by design). So, can anyone confirm that the warning in the event log from the SQL Browser service occurs becuase of that the SQL Express edition doesn't allow any "AdminConnection", but the SQL Browser service isn't aware of that SQL Express edition shouldn't support that, and reports it as a warning (implying that we can't do much about this warning)?
I am running dts in Sql Server 2005 management studio from Management, Legacy and data Transformation Services.
Once the dts has run, I get this error message "Error Source : Microsoft Data Transformation Services (DTS) Package Error Description : Error accessing Windows Event Log."
I have recently installed a new server for a client running SBS2003 R2 with SQLServer 2005.
I noted that the backup failed the SQL Server database on the consistenty check. On checking the event log I see this message as per above.
It reads in the description
c:datalawsqldatadata41_Data.MDF:MSSQL_DBCC6:
Operating system error 112(error not found) encountered.
Looking in the error log I see :
Configuration option 'user options' changed from 0 to 0. Run the RECONFIGURE statement to install.
Error: 17053, Severity: 16, State: 1.
C:DataLAWsqldatadata41_Data.MDF:MSSQL_DBCC6: Operating system error 112(error not found) encountered.
DBCC CHECKDB (data41) WITH no_infomsgs executed by NT AUTHORITYSYSTEM found 0 errors and repaired 0 errors. Elapsed time: 0 hours 0 minutes 26 seconds.
This is a new server with about 90% of disk space NTFS still available
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Hi, I am getting the following error when I try to open up my web application now, after installing the report viewer add on and placing it onto one of my pages.
Parser Error Message: Could not load file or assembly 'Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=nutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system could not find the file specified.
Source Error: Line 47: <add assembly="Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" />
Source File: web.config
So far I have tried to fix this error by installing the reportviewer.exe on the server. I have also verified that the ReportViewer files are in the assembly folder on the server. I also found a site saying to run the reportviewer.exe from a specific location, here is the link
but when I try to browse to the folder it is talking about I found out that I don't even have a BootStrapper folder under Microsoft Visual Studio 8/SDK/v2.0
Does anyone have any ideas on how to fix this error?
I have successfully created and processed a mining structure (decision tree). However, when I try to generate the tree graph, I am getting the following error:
TITLE: Microsoft Visual Studio ------------------------------ The tree graph cannot be created because of the following error: 'Object reference not set to an instance of an object.'. For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.762&EvtSrc=Microsoft.AnalysisServices.Viewers.SR&EvtID=ErrorCreateGraphFailed&LinkId=20476 ------------------------------ ADDITIONAL INFORMATION: Object reference not set to an instance of an object. (Microsoft.AnalysisServices.Viewers) ------------------------------ BUTTONS: OK ------------------------------
...with the following technical details
=================================== The tree graph cannot be created because of the following error: 'Object reference not set to an instance of an object.'. (Microsoft Visual Studio) ------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.762&EvtSrc=Microsoft.AnalysisServices.Viewers.SR&EvtID=ErrorCreateGraphFailed&LinkId=20476 =================================== Object reference not set to an instance of an object. (Microsoft.AnalysisServices.Viewers) ------------------------------ Program Location: at Microsoft.AnalysisServices.Viewers.TreeViewerBase.GetTooltipText(TreeGraphNode treeNode) at Microsoft.AnalysisServices.Viewers.TreeViewerBase.predictionTreeComboBox_SelectedIndexAction() Has anyone encountered this same error?
I'm trying to use an XML Task to do a simple XSLT operation, but it fails with this error message:
[XML Task] Error: An error occurred with the following error message: "There are multiple root elements. Line 5, position 2.".
The source XML file validates fine and I've successfully used it as the XML Source in a data flow task to load some SQL Server tables. It has very few line breaks, so the first 5 lines are pretty long: almost 4000 characters, including 34 start-tags, 19 end-tags, and 2 empty element tags. Here's the very beginning of it:
<?xml version="1.0" encoding="UTF-8"?> <ESDU releaselevel="2006-02" createdate="26 May 2006"><package id="1" title="_standard" shorttitle="_standard" filename="pk_stan" supplementdate="01/05/2005" supplementlevel="1"><abstract><![CDATA[This package contains the standard ESDU Series.]]></abstract>
There is only 1 ESDU root element and only 1 package element.
Of course, the XSLT stylesheet is also an XML document in its own right. I specify it directly in the XML Task:
Parser for XMLA (XML for Analysis): Timeout geting XMLA-Request (XML for Analysis). Error when executing the administrated stored procedure 'GetItemsets': Exception has been thrown by the target of an invocation.Microsoft::AnalysisServices::AdomdServer::AdomdException.
I get this Error in Miningmodel-Viewer, what to do? This occurs when I set the MAXIMUM_ITEMSET_COUNT to 1,500,000 .
I have read the threads regarding the Neural Network Viewer and I think I have a similar problem. I do have Service Pack 2 installed and I'm running the x64 version of SQL 2005.
I'm building a model from a single relational CASE table. Granted the table has many columns summarized at the customer level but there are it is well formed and has no NULL values (plenty of zero or blank values though). The only time I can get the NN Viewer to work is when I accept the attribute recommendations. It seems once I stray from these recommendation, even if there is still correlation with an attribute, I cannot view the model using the NN Viewer. My latest error message says:
"The provider could not determine the String value. For example, the row was just created, the default for the String column was not available, and the consumer had not yet set a new String value."
I get this message even when all input attributes are Continuous so I'm not sure what String column it is referring to.
Any help is greatly appreciated. I'm in a time crunch and I have sold the client on SQL Server 2005 capabilities. It's a bit embarrasing if I can't get this resolved.
-- Steve
P.S.: I don't recall having any issues with the NN Viewer prior to Service Pack 2 (although others have). Have you done regression testing to test this issue?
I don't know if this is the correct forum or if it would perhaps be the server setup & upgrade, however, I'll ask here first. I am going through the SQL 2005 data mining tutorials and have encountered an error that states:
Query (1,6) The '[System].[Microsoft].[AnalysisServices].[System].[DataMining].[AssociationRules].[GetStatistics]' function does not exist.
After looking around for a bit it appeared that this function is generally used in a stored procedure run from the server. Is this correct? What do I need to do to either correctly import the function into the project or to make sure that it is installed on the server?
We are running the Ent Ed. now, however, we just upgraded to this after I had already started on this project. Could that be a problem?