Excel 2007 Data Source/Destination
Dec 5, 2007I've SSIS 2005 SP2 and Excel 2007 installed. How come I do not see Excel 2007 on the Excel version list?
Thanks,
Ash
I've SSIS 2005 SP2 and Excel 2007 installed. How come I do not see Excel 2007 on the Excel version list?
Thanks,
Ash
Hi,
We have a excel 2007 file with a Pivot Table in it. We would like to use the same as data source (But all the source fields as it comes for Pivot). The key issue is that the data to the pivot is from a connection and points to DB - but there is no access to DB. So the Excel is static to us with a PIVOT in it.
Is there a way to get all the data that is avaialble as a source for pivot.
Ex. The select query has co1,co2....co 11 from xxxxx
whereas the PIVot HAS ONLY cO1, CO2 AS ROW, CO3,CO4 AS COL, CO5 AS VALUE AND CO6,CO7 AS FILTER AND OTHERS MISSED OUT IN PIVOT.
THe SSIS as such provide Excel 2007 access to Access OLE DB driver with Excel 12 setting in advanced tab. But not sure whether we can give the range (or) a way around ot get all the data as available in excel regardless of what is used only in the pivot.
Regards,
kart
1 How to get the desired output colums into Excel file without having 'copy of column/unwanted columns' in destination file.
2. How to override the existing file in excel destination.
Hi,
My OLE DB Source and Excel desintation values all will be assigned during the run time but it does work during design time but as on runtime columns are different. That's why it does not work.
Here is what I want to accomplish, I have table which contains all my report which needs to dumped to excel at the month end.
SQL Task using ADO enumrator read one record(one report), Give that record to For Each contair which Create the Excel file on the fly using one of variable from my table and uses a stored procedure to dump data to excel using Dataflow Task.
xlsQuery
CREATE TABLE `Sheet1` ( `FiscalYear` Short, `FiscalPeriod` Byte, `STORE #` Short, `Total Markups` Decimal(15,2), `Less Markdown SubTotal` Decimal(15,2), `Total Markup` Decimal(15,2) ) GO
sqlQuery
Exec Report.MyReport 1
Does it mean for 10 reports, I have to create 10 different data flow tasks, or it can be done using one data flow tasks but changing columns on the run time.
Please Help
Thanks
Shafiq
Hello,
I am getting this warning message,when I am trying to load an excel file to a table
[Excel Source 1 [12717]] Error: A destination table name has not been provided.
These are the steps I am performing
EXCEL source
|
Data Conversion
|
OLEDB Destination
In the EXcel Source I have the Data Access Mode as
Table Name or View Name variable
Am I missing something.. I tried to give a default value in the variable and then I am getting this warning
Error at Data Flow Task [Excel Source 1 [12717]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37.
Error at Data Flow Task [Excel Source 1 [12717]]: Opening a rowset for "Order" failed. Check that the object exists in the database.
Any help is really appreciated.
Thank You.
Well I'm hoping I'm asking this in the right place. But probrably not. I am using VB2005 express and have Access 2007 beta. When I try to add a new data source VB is looking for a .mdb database type. However Access 2007 beta uses .accdb. I'm not sure how to get these two talking since in the vb drop down boxes all it list is a connection on access with .mdb and all files. When I try all files and pick the accdb data I get the "Couldn't connect with data sorce c:blahblah/bills.accdb.mdb. This an error or am I just totally off the mark? Any help would be appreciated.
View 2 Replies View RelatedHi Guys,
I am trying to export data from database to excel 2007 file on my machine.
I have downloaded the provider for office 2007 and I have XP with sp2 and SQL server 2005 with SP2.
I havn't installed office 2007 on my machine,but I have a excel file which is created in office 2007.To get acess of read and write i have downloaded office compatibilty pack too,So I can read and write into the file.
Now I am creating one SSIS package to export data into excel file.But I m not able to coause I am getting some errors like
"test connection failed because of an error in intializing provider. Invalid UDl file"
"Test connection is failed because of an error in intializing provider.Not a valid file name".
Please help or suggest how to export data from database to 2007 excel file.
Yogesh V. Desai. | SQLDBA|
Hi,
I wants to import data using DTS package from Excel 2007. I have tried this by using DSN but i'm not getting Excel 2007 types.
Please suggest me how to Connect to Excel 2007 using DTS package to import data.
Thanks!
My vendor requires data to be sent in Excel format. Some of my tables have rows over 65,536 so I need to use Excel 2007 (Max of 1,048,576). Right now my data sits in SQL 2000. I am using MS SQL Enterprise Manager 8.0 to prepare the data. Is there some kind of add on or selection I am missing to use DTS to export from SQL to Excel 2007?Thanks in advance.
View 3 Replies View RelatedHi,
I have an Excel 2007 file which contains values in specific cells like A23, D30 etc.
I want to populate the values in these cells using SSIS packages into individual rows of an SQL table.
How can this be achieved ?
Cheers
Sam
I install add-in and run fine for a while, then all of sudden I could not see Table Analyze tool and data mining tab at my ribbon. I re-run server configuration and re-connect to DMAddinDB (remote server, but I am the administrator), but data mining add-in and table analyzer still not showing at my ribbon.
Then I uninstall DMAddin, re-install it, go through configuration again, but still the tabs are not showing up.
Any idea you can help me get my add in back?
Hello all,
I am in the process up testing an upgrade from XP to Vista, and the only thing that I am running into is that my linked servers for Excel that I defined no longer work.
The spreadsheet that I am trying to open is in the 97-2003 format (not the 2007 format), yet I keep getting the same error message "Cannot initialize the data source object of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "TEST1"
Has anyone successfully created a linked server to an Excel spreadsheet on Vista, and if so, please can you provide some insight into what I am doing wrong.
I tried creating a linked server on an XP box running MS Office 2007, and it worked without any issues.
All comments welcome.
thanks
Steve
Hello,
I made a package in SSIS to copy some data from SQL server 2005 SP2 to Excel 2007. The package works fine, but generate errors. If I replace the OLE DB destination for Excel 2007 with a Excel destination for Excel 2003 then they errors don't appear. The problem is that I have to use Excel 2007 because the data contains more than 65000 records. I thought maybe it was to much date, but if I limit the amount of data with top 100 it also generate errors.
The errors are:
SSIS package "Package.dtsx" starting.
Information: 0x4004300A at Declaratiegegevens NZDF naar Excel, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Declaratiegegevens NZDF naar Excel, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Declaratiegegevens NZDF naar Excel, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Declaratiegegevens NZDF naar Excel, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at Declaratiegegevens NZDF naar Excel, DTS.Pipeline: Execute phase is beginning.
Information: 0x40043008 at Declaratiegegevens NZDF naar Excel, DTS.Pipeline: Post Execute phase is beginning.
Error: 0xC0047018 at Declaratiegegevens NZDF naar Excel, DTS.Pipeline: component "Source Declaratiegegevens uit NZDF op NED_NDFSQL01" (1) failed the post-execute phase and returned error code 0x80004002.
Error: 0xC0047018 at Declaratiegegevens NZDF naar Excel, DTS.Pipeline: component "Source Declaratiegegevens uit NZDF op NED_NDFSQL01" (1) failed the post-execute phase and returned error code 0x80004002.
Information: 0x40043009 at Declaratiegegevens NZDF naar Excel, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Declaratiegegevens NZDF naar Excel, DTS.Pipeline: "component "Destination Excel 2007" (142)" wrote 353858 rows.
Warning: 0x80019002 at Package: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
I hope someone gots a answer...
Thanks in advantage!
Michaël
I downloaded a trial version of office 2007 and the data mining addin. I do not have an automatic connection to Analysis Services, so most functionality does not work. Is it possible to configure a connection with a trial version? If so, does anyone know what the server name is and how to configure it?
View 14 Replies View RelatedI have a stored proc that runs and produces an Excel 2007 file. I can run it fine within SQL Server Management Studio.
Basically, this is a partial code in the stored proc:
-- export sql server table data to excel 2007
insert into OPENROWSET('microsoft.ace.oledb.12.0',
'Excel 12.0;Database=D: emp est2007.xlsx;',
'SELECT * FROM LicensesrRegion') select * from Licenses
BUT when I have an execute SQL task to run that stored proc in an SSIS package, I received the following error:
Ad hoc access to OLE DB provider 'microsoft.ace.oledb.12.0' has been denied. You must access this provider through a linked server.
Please advise.
PS: I have to run that stored proc in an SSIS package because the SSIS package does some prereq stuff ( create folder, copy template to new Excel output file) then finally calls the aforementioned stored proc.
Thank you in advance.
Thanks!
I€™m having a problem with Excel 2007 DM and SQL 2005 and I hope someone out there has a solution.
Consider the following environment:
Windows XP SP2 or Windows Vista, Excel 2007, Data Mining Add-in, SSAS 2005 (with session mining models enabled, an AdventureWorksDW cube deployed and drill-through actions available).
Now take the following steps:
1. In Excel 2007 set up a connection to SSAS
2. Connect to the cube and create a new pivot table report (drag and drop whatever you like)
3. Right-click on one of the cell values in the data region and either select a drill-through action, or, select Show Details in the context menu
4. Ensure that you have at least 10 detailed records that are generated on a new worksheet page; you should have a time-based column in your detailed records
5. Select the table of detailed data, then select the Analyze tab (within the Table Tools grouping) which appears in the topmost menu above the ribbon
6. Click the Forecast button in the ribbon and choose both the field which you want to predict as well as the time-based column (from step 4) as well as the number of time periods to forecast
7. Finally click OK.
1. Having followed these steps on both WinXP SP2 and Vista, I keep coming across the exception: HResult:0x800A03EC. Any ideas as to why this exception pops up? If I was using a normal table of data (which was not generated from a Show Details or drill-through action), then the Forecast button works fine.
I googled it and thought the localization settings for SSAS 2005 and Excel 2007 needed to be the same (initially they weren€™t). I€™ve tried removing the auto-filters which appear atop each column in the detailed data table prior to clicking the Forecast button, and, I€™ve also tested for a series of data across a number of time periods with the same result.
Also, a colleague of mine discovered that the column headers that appear by default from a drill-through start with "$[", and, in removing them the Forecast function appears to work.
I would have thought there would be a seamless transition in Excel 2007 between data retrieved from a cube and the DM Add-in featueres (or at the very least, a more meaningful exception message than the one presented).
Is there something I€™ve missed, or, is there a KB article I haven€™t come across yet? As I know for a fact that the problem is reproducible, is there a fix to this problem on its way to us? Is there a useful workaround that doesn't require manual intervention?
Thanks,
A.
I need to see inside a SSIS 2012 project a new SSIS installed component, but in the SSDT 2010 I cannot see the SSIS Data Flow Items tab for adding data source/data destination respect to the choose toolbox items pane.
View 4 Replies View RelatedI am trying to load data from Excel 2007 version into SQL server 2014 DB. I am getting below error"Â SSIS Error Code DTS_E_CANNOTACQUIRE CONNECTION FROM CONNECTIONMANAGER. Â The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. Â There may be error messages posted before this with more information on why the AcquireConnection method call failed".I have tried all options like changing Delay Validation is TRUE and in properties i changed runtime 64 bit to FALSE but still getting above error.
View 3 Replies View RelatedHi,
When expoting data from excel to sql server table, using SSIS package, after exporting is done, how would i check source rows are equal to destination rows. If not to throw an error message.
How can we handle transactions in SSIS
1. when some error/something happens during export and the # of rows are not exported fully to destination, how to rollback the transaction in SSIS.
Any sort of help would be highly appreciated.
Thanks,
Hi,
When expoting data from excel to sql server table, using SSIS package, after exporting is done, how would i check source rows are equal to destination rows. If not to throw an error message.
Any sort of help would be highly appreciated.
Thanks,
I have an source file and i have to load it into the data base by changing datatype of the columns in ssis
View 1 Replies View Related I am using a Excel Source to get the data from an excel file to sql server 2005 table. A couple columns are coming in a double precision float, but some values have characters in them, but those values are coming out as null, even though I changed the datatype from float to unicode string. Any inputs on resolving this will be much appreciated.
Thanks,
Manisha
Hello,
I have a problem with retreving a excel data through excel source component.
I have source component as Excel Source which will connect to my .xls sheet.
To retrieve the values from the sheet i am using a query as,
"SELECT F14,F3 FROM [Charac Defn & Assgnment$]"
The column F14 is not formatted so that the format of the cell is "General" I have a different type of values in the F14 column such as "PE","PES",15,20,20.00,8888.9999 etc..
While i click on preview button of Excel source it shows only the text values and not the int or decimal values, its returning NULL for those cells. I tried to use convert function, its throwing an error as
TITLE: Microsoft Visual Studio
------------------------------
There was an error displaying the preview.
------------------------------
ADDITIONAL INFORMATION:
Undefined function 'Convert' in expression. (Microsoft JET Database Engine)
Is there any other function to change the format of the cell or i need to some thing else
Please help me how to solve this issue.
I want to process data from source table to destination table without using cursor.
At this point; we are creating temp table and inserting data from source to temp table. once we get data into temp table; using while loop we are processing record one by one to destination table.
while executing stored procedure; we noticed that there are few records in source table which are invalid and stored procedure is terminating from such records.
Any better approach to log INVALID data and resume code to process next record instead of terminating.
Hi,
I have read only permission in the source (OLTP) database. The source database is running in SQL Server 2000 and the size is more than 200 GB. I need to pull data from source and load target which is running in SQL server 2005.
Following are the objectives I want to achieve.
Data should be loaded on incremental basis.
Whatever changes take place (Update/Delete) in source, that should be replicated to already uploaded data.
Here I want to mention that, the source database does not have any identification key or timestamp column like Updated_Date by which I can filter the data which are recently inserted or updated into the source and upload the same. The source does not maintain any history data also. So I do not have any track of deleted record also.
I don€™t have any scope to change the schema in the source. In this scenario can anybody suggest me the best approach to achieve the above mentioned objectives?
Can I retrieve only the recent updated or inserted date form transaction log back up. Can log shipping solve the give the solution?
One more question. Say I have a table and I am exporting/importing all the data from/to my target table using SSIS or DTS. In this scenario does using query or using directly the table affects the performance?
Regards
Sudripta Rakshit
I need to write TSQL script that will insert, update, delete rows in a production db from new, updated and deleted data from staging db. They are both in different servers and I can only use TSQL. Basically, the production DB needs to be synchornized with the staging DB.
I was thinking using dynamic sql, cursors, and linked servers. Any ideas?
Jim
Hi
i want to compare the source and destination data my source is Oledb source and destination is sql server destination I want to Compare the Data in destination with source and also want to add validation like iF Any row is there is destination but not in source delete that row if any row in source but not in destination Insert that row nd compare source with destination respect to Primary key if There is change in any column of that row Update that if not change than move to next record. Please tell me what is the sutable object and what to do
Please Help me Out
Thanks
Sandeep
Hi,
I am new to SSIS can u help me out in this i have a source(Flat File) and target SQL Server 2005. Source has got 2 columns- Col1 and Col2 even target has got 2 col's Col1 being the PK. I have created a package that checks if target and if the record exist it updates and if it does not it inserts. My package looks like
Source - lookup on target- Conditional split- Derived Column and then 2 OLE DB Destinations 1 for inserts and 1 for updates.
I have created a relationship in lookup with col1 from source and col1 from target and col2 as lookup col and connected red output to 1 OLE DB for inserts and redirect rows to it. Green out put i have taken to conditional split and gave condition like Col2 from source is not equal to lookup col2. I run the package with this it is inserting new records but not updating it.
I tried to add derived column after conditional split but lacks in writing expression that says update col2 records if they changed at source. Can u help me out in this scenario. I would appreciate if you could get back to me ASAP.
Thanks
I am a complete newbie to SSIS. I can create a simple package to transfer data between SQL instances and thats about it.
I have tableA (source data) and tableB (Destination data). TableA has 4 column and tableB has 5. I want to transfer all of the columns from tableA into TableB, but the 5th column in tableB needs to be populated with the ServerInstance name of the server TableA sits on. Do I need to have multiple data sources to achieve this? I have tried but no matter how I set it up, the Column in the destination is set to ignore.
Hi
Inside a data flow task, i have a oledb source and destination. In my situation, I need to pull data from a table in the source, but also hard code some columns myself, which means my source is a blend of data from table, hard coded data, which will then have to be mapped to columns in oledb destination. Does anyone which option to choose in the oledb source dropdown for the data access mode. Keep in mind, i do need to run a a select query, as well as get data from a table. Is it possible to use multiple oledb sources and connect to one destination, because that is really what intend to do here. I am not sure how it will work, or even if its possible. Basically my source access mode needs to be a blend of sql command and table columns, how would that be implemented? Any help or advice is appreciated.
MA
I'm trying to build a DTSX package that FTP's an XML file to the local file system and then imports it into an existing table.
My "Data Flow" for the package starts with an XML Source component and then goes to Data Conversion component and then to an OLE DB Destination component.
It all executes with out error and seems to work fine, but when I look at the data in the table after I've run the package it seems to have inserted the appropriate number of rows from the XML file but all of the column values are NULL.
All of the data in the XML file is surrounded by <![CDATA[ ]]> and I discovered that if I remove the CDATA wrapper by hand then it inserts the data properly. The only problem is that I'm not in a position to have the data provider remove the CDATA tags and some of the data in the XML file needs the CDATA wrapper or else it will not validate.
Anyone know of anything I can do to get the CDATA to import properly?
Does Replication use linked server.
If not then how data will transfer from source to destination.
Note : As per my knowledge it is not backup and restore like logshipping.
Hi,
I am having one query regarding data transfer using SSIS. If we use
DTS packages for the data transfer between two databases then the source database and
destination database must be on different db servers or instances.Here, I
am talking about the DTS Packages with Distributed Transactions enabled.
I need to know that whether this constraint has been rectified with SSIS Packages or it still persists.
One more thing is that while transferring the data, can we view/insert/update source database or it is locked if the transfer is in process.
Please reply..........
Thanks and Regards,
Rajesh