I have over 600+ Excel .xlsx file that I have been trying to import to Sql database table. I've been trying to complete this task with SSIS but no luck yet. I have seen several videos and read articles but when I run the package the source is validated but I always get an error in the destination. I am using Excel 2010 and SQL Server 2012.
View 3 RepliesHi,
I need to import around 200 excel file data into one table. Is there a way of doing this using SSIS or DTS? I know how to import single excel file into table but i need to automate this process for many files. All help appreciated
Thanks,
HEMAL
I used sql server 2012 express Import and Export Data (32-bit) wizard to import data from excel 2010 to a given table. But I got the following error message: Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Unspecified error". (SQL Server Import and Export Wizard)
Â
Error 0xc020901c: Data Flow Task 1: There was an error with Destination - MPRecord.Inputs[Destination Input].Columns[Top1] on Destination - MPRecord.Inputs[Destination Input]. The column status returned was: "The value violated the integrity constraints
for the column.". (SQL Server Import and Export Wizard)
Â
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - MPRecord.Inputs[Destination Input]" failed because error code 0xC020907D occurred, and the error row disposition on "Destination - MPRecord.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure. (SQL Server Import and Export Wizard)
Â
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - MPRecord" (35) failed with error code 0xC0209029 while processing input "Destination Input" (48). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
Hi all,I have de following application to do :I receive several .csv files from another application in a determined folderof my PC.Those files are named with the format log1.csv logs2.csv logs...The number of file is variable but the internal format is always : time_sec;levelSo the files content a field that may be used as unique key in the target database.I'm trying to build a DTS package that should import periodicallyall the CSV's present in the folder and then destroy them if donesuccessfully.Apparently its not so simple than I supposed. I have always to give the nameof the table I want to import.any idea?
View 1 Replies View RelatedI am having with trying to import XLSX files into SQL 2012 64 Bit.
I have installed the Access driver (AccessDatabaseEngine_x64.exe)
I have configured the script to run the following SP
sp_configure 'show advanced options', 1
GO
RECONFIGURE WITH OverRide
GO
sp_configure 'Ad Hoc Distributed Queries', 1
[Code] ....
So I first create my Temp Table
The run the SP above then I run the insert into the Temp table defined
INSERT INTO tempdb.dbo.TempTRBZ (IsNew,CoID, Zip, City, County,StateCode,Rate,Taxable,TaxShip,TaxLab,CountryID,StateID)
SELECT * FROM OPENROWSET( 'Microsoft.ACE.OLEDB.12.0','EXCEL 12.0;Database=C:TempNotInTrbzJan.xlsx;HDR=YES','SELECT * FROM [Data$]')
[Code] ....
The error message I get back is
Msg 7303, Level 16, State 1, Line 4
Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "(null)".
What I have set wrong on the import? Using SSIS at this point is not a real option.
have just implement Microsoft Dynamics NAV. and I'm trying to learn how to use this Excellent tool powerpivot add on, But when I'm trying to connect it to any SQL table that support Dynamics NAV I have an error message while downloading the table :"do not have enough memory or I should use Excel 64 bits instead 32 bits".when I check CPU memory Utilization we are just using less tha 20%. I'm working on a remote server and the using Excel 2010.
View 3 Replies View RelatedDear All,
I am importing all the files from a particular folder to a table on my database KB. It is working perfectly if i use it on the same system where the DB exists and not working from the network.
USE TESTDB
--Table Creation Starts here
Create table Account([ID] int IDENTITY PRIMARY KEY, Name Varchar(100),
AccountNo varchar(100), Balance money)
Create table logtable (id int identity(1,1),
Query varchar(1000),
Importeddate datetime default getdate())
--Table Creation ends here
---Stored Procedure Starts here
Create procedure usp_ImportMultipleFiles @filepath varchar(500),
@pattern varchar(100), @TableName varchar(128)
as
set quoted_identifier off
declare @query varchar(1000)
declare @max1 int
declare @count1 int
Declare @filename varchar(100)
set @count1 =0
create table #x (name varchar(200))
set @query ='master.dbo.xp_cmdshell "dir '+@filepath+@pattern +' /b"'
insert #x exec (@query)
delete from #x where name is NULL
select identity(int,1,1) as ID, name into #y from #x
drop table #x
set @max1 = (select max(ID) from #y)
--print @max1
--print @count1
While @count1 <= @max1
begin
set @count1=@count1+1
set @filename = (select name from #y where [id] = @count1)
set @query ='BULK INSERT '+ @Tablename + ' FROM "'+ @Filepath+@Filename+'"
WITH ( FIELDTERMINATOR = ",",ROWTERMINATOR = "")'
--print @query
exec (@query)
insert into logtable (query) select @query
end
drop table #y
--sp ends here
Exec usp_ImportMultipleFiles 'c:myimport', '*.csv', 'Account'
If i use the above Exec like
Exec usp_ImportMultipleFiles '\kb-02C$MyImport', '*.csv', 'Account'
I am getting the following error:
Could not bulk insert because file '\kb-02C$MyImportAccess is denied.' could not be opened.
Operating system error code 5(Access is denied.).
C Drive and MyImport folder is shared on system kb-02
Would appreciate your valuable HELP.
thanking your valuable help in advance.
K006B
How to import multiple text files (residing in single folder) into SQL Server table? I know how to import single file but not sure how multiple files could be loaded? Pls. guide.
Thanks,
HShah
I am getting the following error when trying to load multiple excel files using for each loop container in SSIS, I tried to put the quotes in several different ways but still can't get rid of this error. I was able to successfully load single excel file, but when I use the for each loop container that's when I am having problems. Any help is greatly appreciated. Thx.
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at Package1 [Connection manager "SourceConnectionExcel"]: The connection string components cannot contain unquoted semicolons. If the value must contain a semicolon, enclose the entire value in quotes. This error occurs when values in the connection string contain unquoted semicolons, such as the InitialCatalog property.
Error at Package1: The result of the expression ""Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + @[User::Folder] + @[User::file] + ";Extended Properties="Excel 8.0;HDR=NO";"
" on property "ExcelFilePath" cannot be written to the property. The expression was evaluated, but cannot be set on the property.
(Microsoft.DataTransformationServices.VsIntegration)
------------------------------
BUTTONS:
OK
------------------------------
I have a requirement where in i have around 15 different flat files , filenames are fixed but folder path can be changed(i think i should use a variable for folder path). These 15 files data should go to their respective tables in the database.
Whether I need to create separate data flow task for each file or separate package? In addition to these, example : while importing product data into product table, if product ID already exists, we need to ignore it and upload only the new records.
I have an excel file that has multiple sheets and I need to import data from each separate sheet to a separate table using SSIS.Â
E.g. Sheet A data should go to Table A and Sheet B data should go to Table B and so on. Is it possible to do this with out using script task.
I have data in excel files I want to import it to existing SQL Server database. I can use SQL Server built in import tool but before Importing, the data needs to be validated. What is the best way to do this?
Thanks
Hi,
Using SSIS, I am successfully importing data from excel files into a table in sql server 2005.
These excel files are ALWAYS open and are being updated from external sources i.e. third party tools.
After doing alot of investigations, I have reached the conclusions as follows:
When the excel files are NOT being updated, then the ssis package works
BUT when the excel files are being updated, then the ssis package does not work. The error is:
[Excel Source [749]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Please note that the excel files MUST be open so that they get updated by the third party tool.
AND, every few minutes i.e. 5 mins, my ssis package should import these excel files.
Question:
How is it possible to load the excel data while it is being updated by external third party.
Thanks
It's very simple import, without any data modifications; from severalexcel files to one table.I tried the wisard and it gives me selection for only one file.I am not used to create DTS packages and schedule jobs, so I would needsome help.Thank youInna
View 1 Replies View RelatedScenario:
Various excel files with the same structure will reside in a folder. These excel files should be exported daily in a Sql server table. If the data within the excel file according to an id is new then all data should be appended to the table, otherwise if the id exists in the sql server table then it must update the remaining corresponding fields.
I know how to export an excel file to a sql server table, i need some help in comparing the excel file data with the sql table so to make the appropriate updates.
Can anyone please help me get started?
Regards,
Panos
Hi,
Using SSIS, I am successfully importing data from excel files into a table in sql server 2005.
These excel files are ALWAYS open and are being updated from external sources i.e. third party tools.
After doing alot of investigations, I have reached the conclusions as follows:
When the excel files are NOT being updated, then the ssis package works
BUT when the excel files are being updated, then the ssis package does not work. The error is:
[Excel Source [749]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Please note that the excel files MUST be open so that they get updated by the third party tool.
AND, every few minutes i.e. 5 mins, my ssis package should import these excel files.
Question:
How is it possible to load the excel data while it is being updated by external third party.
Thanks
I routinely need to import data into SQL DB from Access 2010.I've tried using both Openrowset and Opendatasource, and I'm receiving similar errors.
Here's my code I'm trying:
SELECT *
FROM OpenRowset('Microsoft.Jet.OLEDB.4.0','C:ITS DatabaseCHI_ITS_v2013a.accdb';'admin';'',Sheet2)
Here's the error message I'm receiving:
Msg 7308, Level 16, State 1, Line 1
OLE DB provider 'Microsoft.Jet.OLEDB.4.0' cannot be used for distributed queries because the provider is configured to run in single-threaded apartment mode.
I have been asked to re-write an existing system that is in Access 2010 and have everything now .NET and SQL Server. The tables I have successfully moved but I am battling to import the reports. In my SSRS 2005 I only have an option to import from mdb or adb files not accdb that is 2010 Access.
View 4 Replies View RelatedHi,
I have about 300-400 XML files I want to load in my SQL database (2005). The following code will load one (1) file. How do i do a mulitple collections?
INSERT INTO MEL (DATA) SELECT * FROM OPENROWSET (BULK'C:TempCHAPTER1.xml', SINGLE_BLOB) AS TEMP Thanks,
I have 8GB of text files which are basically log files from the past few years.
There is 24 text files per directory which are labeled for every day (so they are not all in 1 folder).
It would make reading them much easier if I could import them to SQL but I only seem to be able to import 1 at a time? (with the wizards :eek: )
Surely there is a way to mass import without all the costly applications that google searches give me?
cheers :P
I have a script which imports the contents of a csv file from our CRM system and updates a table in my database. This works OK but the problems I have are that a) sometimes there is more than one file in the folder, and b) that I wish to move any csv files that have been imported into an archive folder. The csv files arrive with a time/datestamp and I currently rename them manually to FREXPORT before importing (the name is in the format FREXPORT_20141101_1217.csv).How do I:
1) get it to process the file without me having to manually rename the file(s) each time,
2) if there is more than 1 file in the folder process all the files and 3)move the correctly processed files to an archive folder which is: importarchive?
Ultimately, I would like the script to be run as a scheduled job, so it also has to deal with the fact that sometimes there will be no files to import too.
[code]create table #import
(worknumber nvarchar(12), date_done smalldatetime)
BULK
Insert #import
from 'fork04-hq-dc01dataimportFREXPORT.csv'
[code]....
Hi all,New to SQL Server - trying to create an SSIS package that will look forand import a series of Visual Foxpro tables (.DBFs) when they appear ina folder.The tables are/can be all different fields, field widths, etc. Withquite a bit of overlap though.The end result should be table "ABC.DBF" is pulled into SQL Server astable "ABC"Using: SQL Server 2005 Enterprise, SSIS, *latest* version of VFPOLEDBdownloaded from MSI have set up a package and tested it with several different tables andit works great - but I have to redo the data source and destinationeach time...I need to get this to be a somewhat automated process, pulling in all..DBFs no matter what they contain.Can I do this with SSIS alone (and variable substitution) or do I needto write a bunch of code...Thanks very much for your time and thoughts...
View 1 Replies View Related
I am building a ssis package that imports multiple xml files containing data into the tables using one xsd file. I am using xml source task for this. I can only import one file as the primary key constraint gets violated.
I have four tables with four primary keys. The xml file does not have the primary key column data. So every time these columns get populated as 1, 2, 3, 4.
I am preety new to xml, so was wondering if anyone can help?
Why doesn't the xml file have primary key column data?
Hello,
I am kind of new to Sql Server 2005.
I figured out how to use the import data wizard to import a delimited text file.
But I need to find a way to import many delimited text files at once.
does anybody know if this can be done in Sql Server 2005? and how?
thanks in advance,
I have an SSAS cube that i want to add some actions to. I've had problems adding a reporting action to the cube so decided just to add a URL action instead. Start simple and build on the concepts...
So i add a new action, give it a name, set the Target Type to Cells, Taget object to All Cells. I've put no condition on the action since i want it to appear all the time.
The action content type is set to URL the action expression is set to [URL] I've also set a caption of "Google" under the additional properties and said that the caption is MDX (I'm aware that it isn't but i do intend to expand on this...).
I then build and deploy my cube, call up excel (2010) and then create a pivot table off the back of the cube but when i right-click the cells in the pivot table and go to "additional actions" it tells me that there are none specified.
[URL]
So I use Excel 2010 connect to a cube I have built. Â Then I change some values in the cube via my ETL and re-process the cube. Â Then I verify that record is NOT there in the fact table - check!
However, when I refresh the worksheet where the pivot table is pulling data from the cube, but that old record wont go away!
Just realized my cube data source on the dev server, was in fact still configured with my local workstation name. Once I updated that, processed the cube all was well.
l've the following situation,
l've some excel files controlled by Vendor which changing frequently. The only thing does not change is the header name of each column.
So my question is, is there any way to create a new table based on the excel file selected including the column name in SSIS? So that l can use the data reader as source to select those columns l am interested on and start the integration.
Thanks.
Regards,
Yong Boon, Lim
p/s : The excel header is at the row 7.
We want to implement cascading slicers in PowerPivot 2010. Does Excel 2010 have 'Insert Slicer Hierarchy' feature in PowerPivot?
View 5 Replies View RelatedI have a client who is sending me 800+ excel files each month with sales data. Each of the files is identical in structure, but has sales data for different stores. I receive all these files at the same time.
Is there a method with Data Transformation Services where I can have it work off of all the files in a given directory. I can set up DTS to work off of specific Excel files with no problem, but what I would like to do is set up a DTS so it could pull from each of the 800+ files.
Is this possible, or do I need to look at a solution outside of SQL to consolidate the Excel files first?
The Excel file would have columns similar to the following: store_id, zip_code, sales, transactions.
HiI have multiple excel files of the same format in a directory.They are called book1.xls, book2.xls, book3.xls and so on.What is the easiest way to import the tab named sheet1 from each ofthe excel files to a databse using SQL server 2000 enterprise edition?Regards,Ciarán
View 2 Replies View RelatedI know from experience that the Excel connection mechanisms are somewhat limited. I was wondering if anyone has come across a solution to this problem.
We receive an excel file from a business line. Basically a list of account mods for a given month. Due to the tabular nature of Excel, sometimes the amount of mods exceeds the limits of one tab and has to roll over into a second tab. The names of the tabs reflect the file creation date, which often is the last day of the month, but not always. Here is a question related to this-
Is there a way to "query" a the list of tabs in an Excel file, so that I could store that record set in an SSIS variable, use it to loop through all the tabs? If no, can you think of a way to somehow get the value of the tab name or names so that I can use it to dynamically set the OpenRowset value of the Excel Data Source?
Thanks for your help, everyone!
--Jon
I have a test server (TEST1) running SQL 2012 and Windows 2012R2. One of the developers wants to use OPENROWSET to read in data from an Excel 2010 file (an xlsx file).
I have loaded the Microsoft Drivers in "AccessDatabaseEngine_64.exe" and enabled the Ad Hoc Distributed Queries option in SQL.
This is the sample code we are working with:
SELECT
X.MEMBID
FROM OPENROWSET(
'MSDASQL',
'Driver={Microsoft Excel Driver (*.xls, *.xlsx, *.xlsm, *.xlsb)};DBQ=etworkserverFolder1Folder2MEMBIDs.xlsx',
'SELECT * FROM [Sheet1$]'
) AS X
I can run the sample query from my laptop with SSMS (I have admin rights) and I can also run it as SA from my laptop. So all is good, right?
But if I RDC into TEST1, I cannot run the query. I get this error:
OLE DB provider "MSDASQL" for linked server "(null)" returned message "[Microsoft][ODBC Excel Driver] Your network access was interrupted. To continue, close the database, and then open it again.".
OLE DB provider "MSDASQL" for linked server "(null)" returned message "[Microsoft][ODBC Excel Driver]General error Unable to open registry key Temporary (volatile) Ace DSN for process 0x574 Thread 0xb74 DBC 0x1d07f08 Excel'.".
OLE DB provider "MSDASQL" for linked server "(null)" returned message "[Microsoft][ODBC Excel Driver]General error Unable to open registry key Temporary (volatile) Ace DSN for process 0x574 Thread 0xb74 DBC 0x1d07f08 Excel'.".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "(null)".But wait! It gets better.
I can run the query as SA from TEST1.
And of course, the developer can't run it either.
And it works fine in the production server.
I'm thinking the basics are there but something isn't right in some permission somewhere.
Using sql server management studio I want to do 2 things.
- Import all txt files from a directory as tables into my DB.
- Add an additional field to each new table which contains the table name.