I run a query from Excel to pull the data from SQL server and I have created another worksheet to add my columns for different analysis and costs. When someone add another line in SQL against an order or a customer then manually added columns data goes out of sync.Is there anyway when I refresh the RAWDATA or anything changes on SQL table then it should sync my formatted worksheet.
View 4 RepliesHi,
In my application i am storing the data in a database(server A). And i have a scenario where in a middle server(server B) is there in which i need to create a table and pull the data from one of the tables from my original database server(server A) into second database server(server B). Where can i get the code to write a job script which can connect from server B to server A and pull the data from the table and delete that data from the table in server A. Can any give me the code or link where i can find the code. Please help.
Thanks
Could someone give me the general syntax to pull xml data from a web server that I have access to? I do know that I can not use an ip address, I have to use the hostname, etc.
I was using something like
FROM OPENROWSET(BULK '\SERVERNAMESHAREPATHDATAFILE.XML', SINGLE_BLOB) as x
instead of using SERVERNAME I am user http:\www.mycompanyname.commycompanynamestoredata.xml
I do not understand why this does not work. I hope I gave enough information for this.
Please help.
Thank you
LadyDee
pulling data from a table in Server A and creating the same table on Server B.
From what I've read you can't export/import or use a wizard as the db is of the type dbo.md_*****.
Hi There,
I need to pull data using input from one table in sql server 2005. I have to query against the sql server 2000 database and pull data into sql server 2005. I have a list of ids that I have to pass to a query to get the desired data. What is the best practice for this. Can I use SSIS or do I need to build an app in C#? Can somebody please reply back?
Thanks a lot!!
Hey guys, i finally connected to the db fine however for some reason i cannot pull the data. I was hoping somebody here might be able to help me. The code is below
Function MyQueryMethod() As System.Data.DataSet Dim connectionString As String = "server='xxxx'; user id='xxxx'; password='xxxxxx'; database='wel"& _ "sh_indiv'" Dim dbConnection As System.Data.IDbConnection = New System.Data.SqlClient.SqlConnection(connectionString)
Dim queryString As String = "SELECT [test12].[name], [test12].[grade] FROM [test12]" Dim dbCommand As System.Data.IDbCommand = New System.Data.SqlClient.SqlCommand dbCommand.CommandText = queryString dbCommand.Connection = dbConnection
Dim dataAdapter As System.Data.IDbDataAdapter = New System.Data.SqlClient.SqlDataAdapter dataAdapter.SelectCommand = dbCommand Dim dataSet As System.Data.DataSet = New System.Data.DataSet dataAdapter.Fill(dataSet)
Return dataSet End Function
im kinda new to programming with vb for asp.net pages so please bare with me.
We have a custom web C#/SQL2K8R2 workflow application that I need to pull Oracle data into a varchar(max) field as an XML DOM document. I have no problem pulling the Oracle data using OLEDB, but I'm not sure how to create the XML DOM doc. Once I get it into the DOM doc, I then need to assign metadata about the XML DOM doc and insert it all into a staging table:
CREATE TABLE [stg].[EtlImports](
[EtlImportId] [int] IDENTITY(1,1) NOT NULL,
[EtlSource] [varchar](50) NOT NULL,
[EtlType] [varchar](50) NULL,
[EtlDefn] [varchar](max) NULL, --Either a SQL statement or path to file on disk
[EtlData] [varchar](max) NULL, --BLOB field to hold the XML data or FILESTREAM path to file on disk
[EtlDateLanded] [datetime] NOT NULL,
[EtlDateProcessed] [datetime] NULL,
[EtlStatus] [varchar](50) NULL,
[Comments] [varchar](4000) NULL
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
I will have a separate SSIS package to pull the [XML/File] field and process the data into the workflow tables. Is there a wasy I can use the ADO Record-set Destination task to accomplish this, or do I have to create a custom C# script to create the XML DOM Doc?
I am trying to import this years worth of failed logins and last successful login for each user out of the logs using master.dbo.xp_readerrorlog. The script essentially loops through the linked servers I have on my DBA box and reaches out for the log data. It works, but here is the error I am getting on most of our production servers:
OLE DB provider "SQLNCLI11" for linked server "AWSCADENCEDB01" returned message "The partner transaction manager has disabled its support for remote/network transactions.".
Msg 7391, Level 16, State 2, Line 17
The operation could not be performed because OLE DB provider "SQLNCLI11" for linked server "AWSCADENCEDB01" was unable to begin a distributed transaction.
I know how to enable distributed transactions on the servers that error out, but if it is not needed for anything other then my audit script, I doubt the business will approve me turning on distributed transactions at those locations (so I am not even going to ask).
I am attempting to setup a singular audit .rdl with the information I want to review quarterly.
CREATE PROC [dbo].[Import_Login_Data]
AS
IF EXISTS (
SELECT 1
FROM master.sys.servers
WHERE is_linked = 1
[Code] ....
Hi all,
I have following problem:
I'm developing a Windows Mobile application, which is using RDA Pull for retrieving data from SQL Server 2005 database to PDA. Please, see the example:
Code Snippet
using (SqlCeEngine engine = new SqlCeEngine(connStr))
{
engine.CreateDatabase();
}
serverConnStr="Provider=SQLOLEDB;Data Source=.;User ID=sa;Initial Catalog=Demo;Password=xxx";
using (SqlCeRemoteDataAccess rda = new SqlCeRemoteDataAccess(
Configuration.Default.SyncServerAddress, "", "", connStr))
{
rda.Pull("MyTable", "SELECT * FROM mytable", serverConnStr, RdaTrackOption.TrackingOffWithIndexes, "ErrorTable");
}
Everythink works fine, when I use 'sa' user account in serverConnStr.
But, when I change conn string to:
"Provider=SQLOLEDB;Data Source=.;User ID=test;Initial Catalog=Demo;Password=test"
the sqlcesa30.dll cannot connect to SQL Server database.
In the sqlcesa30.log then I found following line:
Code Snippet
2007/04/17 10:43:31 Thread=1EE30 RSCB=16 Command=PULL Hr=80040E4D Login failed for user 'test'. 18456
The user 'test' is member of db_owner, db_datareader and public roles for the Demo database and in SQL Server Management Studio I'm able to login to the Demo database with using the 'test' users credentials and I'm able to run the select command on 'mytable'.
So, what's wrong? Why the sqlcesa30.dll process cannot login to the Demo database, and from another application with using the SAME connection string it works?
Please help.
Thank you.
Fipil.
Hi,
I need to import an SQL string from MS Excel 2003 to SQL SERVER 2000.
The string I need to import is composed by 5 different several blocks and looks like:
Code Snippet
CommandLine01 = "USE mydb"
CommandLine02 = "SELECT Block ..."
CommandLine03 = "GO
ALTER TABLE Block...
GO"
CommandLine04 = "UPDATE Block..."
CommandLine05 = "SELECT Block..."
The detail of the SQL string is at:
http://forums.microsoft.com/msdn/showpost.aspx?postid=2093921&siteid=1&sb=0&d=1&at=7&ft=11&tf=0&pageid=1
I am trying to implement OJ's suggestion:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2117223&SiteID=1
to use multi - batch processing to import the string to SQL SERVER, something like:
Code Snippet
Dim SqlCnt, cmd1, cmd2, cmd3
'set the properties and open a connection
cmd1="use my_db"
cmd2="create table mytb"
cmd3="insert into mytb"
SqlCnt.execute cmd1
SqlCnt.Execute cmd2
SqlCnt.Execute cmd3
Below is the code (just partial) I have, and I need help to complete it.
Thanks in advance,
Aldo.
Code Snippet
Function TestConnection()
Dim ConnectionString As New ADODB.Connection
Dim RecordSet As New ADODB.RecordSet
ConnectionString = "Driver={SQL Server};Server=myServer;Database=myDBName;Uid=UserName;Pwd=Password"
ConnectionString.Open
CmdLine01 = " USE " & myDB
CmdLine02 = " SELECT ACCOUNTS.FULLNAME FROM ACCOUNTS" ...
CmdLine03 = "GO
ALTER TABLE Block...
GO"
CmdLine04 = "UPDATE Block..."
CmdLine05 = "SELECT Block..."
RecordSet.Open CmdLine01, ConnectionString
RecordSet.Open CmdLine02, ConnectionString
ConnectionString.Execute CmdLine01
ConnectionString.Execute CmdLine02
'Retrieve Field titles
For ColNr = 1 To RecordSet.Fields.Count
ActiveSheet.Cells(1, ColNr).Value = RecordSet.Fields(ColNr - 1).Name
Next
ActiveSheet.Cells(2, 1).CopyFromRecordset RecordSet
'Close ADO objects
RecordSet.Close
ConnectionString.Close
Set RecordSet = Nothing
Set ConnectionString = Nothing
End Function
I have a cluster hosting multiple GP databases and a second for my data-warehouse I am playing around with (personal project).
I have scripts that pull data from all the DB's to input into the DW's tables(Customers,Reps,Hub....)
An example of my branch script :
select interidas BranchID,
cmpnynamas BranchDesc,
address1as BranchAddressLine1,
address2as BranchAddressLine2,
address3as BranchAddressLine3,
zipcodeas PostalCode
from dynamics..SY01500
Where interid in ('comp1', 'comp2', 'comp4', 'comp5')
what would be the best way to using these scripts pull the data to my testDW and not have duplicate data issues?
I was thinking of using a staging DB on the GP cluster and then building an import data package to run nightly. the issue i had was how do i avoid duplicate data ?
Hi,
Writing a report that displays total hours, etc for each day in a given month and I'm having trouble comking up w/ an elegant solution. Tables are set up like this:
table1 (id, start_date,end_date,submitter)
table2( id,table1_id,start_time,end_time, etc)
Each record in table2 is a child to a parent record in table1 and there may be multiple children for each parent. The "start_time" and "end_time" fields are datatype "datetime" and are stored with actual times (not 12:00:00 AM"). I need the report to display the values for each day in a gridview, etc so I can act upon them from the "RowDataBound" sub (more math, etc). The problem that I am running into is that for records that have multiple children for a given day, I need to sum those results and display the summed data as a single row within the GV - can't seem to work that out - I keep getting every child record displaying as its own row in the GV.
Any thoughts? I'm sure it's probably fairly simple but I am still a beginner...thanks as always
I am new to SQL, as old as it is. I am not new to programming Inormally just use Access.I have two tables for a little project manager I made. After updates Isent an email to the user. I need to populate the user based on the"Assigned To" field I use, but I only log the username and not theemail address. Is there a way to associate the "Assigned To" to theUser's account in the "User" table so that I can pull thier emailaddress through code?ThanksChuck
View 5 Replies View RelatedI have the report sever running on windows2003 with sql standard server 2005. However, I' m trying to create a report that pull data from a different server with sql express. Could I do this? If so...any links, examples, suggestion I can take a look at.
thanks
Hello -
I am trying to pull data from SQL Server 2000 database onto my Pocket PC and the simple query works on Northwind sample database but does not on another custom build database. I did test the statement in the SQL Query Analyzer and it works.
The error I get is: "Failure setting up a non parameterized query, possible incorrect SQL query."
I know the code is right - thanks to Rory B's screenscasts. Any guidance will be greatly appreciated!
Thanks!
Moldau
Here is the code:
private void RdaPull()
{
try
{
//Create the database
if (File.Exists("\My Documents\Test.sdf"))
File.Delete(\My Documents\Test.sdf);
SqlCeEngine engine = new SqlCeEngine();
engine.LocalConnectionString = localConnection;
engine.CreateDatabase();
engine.Dispose();
//Initialize RDA Object
SqlCeRemoteDataAccess rda = null;
rda = new SqlCeRemoteDataAccess(rdaUrl, localConnection);
rda.Pull ("Customers", "select * from Customers", rdaOleDbConnectionString);
rda.Dispose();
MessageBox.Show("Done");
}
catch (SqlCeException ex)
{
MessageBox.Show(ex.Message);
}
My vendor requires data to be sent in Excel format. Some of my tables have rows over 65,536 so I need to use Excel 2007 (Max of 1,048,576). Right now my data sits in SQL 2000. I am using MS SQL Enterprise Manager 8.0 to prepare the data. Is there some kind of add on or selection I am missing to use DTS to export from SQL to Excel 2007?Thanks in advance.
View 3 Replies View RelatedHi All,
I want to export data from SQL Server2005 to an Excel spreadsheet thru "Data Flow Task". I am using OLE DB for SQL Server for the source connection and a Connection To Excel as my destination source. The Excel spreadsheet (2003) exists and has the first row with column names. I don't have any warnings before trying to execute.
The SQL datable fileds are
i) ID - Int
ii) RefID
iii) txtRemarks - nvarchar(MAX)
iv) ddlWaterLevel - nvarchar(50)
While executing the tasks, I got the error
Error: 0xC0202025 at Data Flow Task, Excel Destination [427]: Cannot create an OLE DB accessor. Verify that the column metadata is valid.
Error: 0xC004701A at Data Flow Task, DTS.Pipeline: component "Excel Destination" (427) failed the pre-execute phase and returned error code 0xC0202025.
After analysing I found in the DataFlow --> Excel destination --> Advanced Editor for Excel Destination, the default data type for txtRemarks shows as "Unicode string [DT_WSTR]". But this is supposed to be "Unicode text stream [DT_NTEXT]". Even if I change the data type in the design time, It doesn't accept.
Please do help me out.
thanks
Sanra
Good Afternoon,
I have recently been tasked to come up with a means by which to create SQL data pulls based on user entries. What I mean by this is, I will have a pre defined SQL data pull set up and the user can then select the criteria upon which to pull said data.
So, say I want to display a table where one of the colums has is the "Year". I dont however want all years of data pulled, only 2005 - 2006. So, in form field 1, I could select start year as 2005 and in form field 2, I could select end year as 2006. This would then give me all data from this table based on that year range, or whatever year range I select and submit.
Is there a way to do this in ASP? I have been reading up on UDF with SQL, but I cant find anything about linking it through the use of web forms or through ASP. Or if there is another way to accomplish this? Any assistance is very much appreciated!
Hello, I am trying to pull run this sql statement but it's bombing out at the comm.ExecuteNonQuery();. ..
Could someone help me figure this out..
Ex.System.Int32 bum = System.Convert.ToInt32(Request.QueryString["dum"]);
SqlConnection conn = new SqlConnection("Data Source=**********************");SqlCommand comm = new SqlCommand();
comm.Connection = conn;SqlDataAdapter myadapter = new SqlDataAdapter(comm);DataSet myset = new DataSet();
conn.Open();
comm.CommandText = "Select * from Order_Forms where (Order_Num = " + Session["dum1"] + " ) ";
comm.ExecuteNonQuery();myadapter.Fill(myset, "Order_Forms");
myset.AcceptChanges();
Can yo usee the problem???
Hi, I am trying to pull e-mail addresses of certain users from a list of all the users in our company. I have two tables. One contains a single column of only the users I need. The other table contains every user and their e-mail address. Could someone tell me how to pull this data from these two tables. I am new to SQL Query and have been trying to figure out these JOIN statements, but nothing I am doing seems to work.
Thank you,
Lisa
I have an OLAP server and would like to use my Chart FX software without having to purchase the OLAP extensions on the server due to budget restraints (ouch).
I've heard that it is possible (although limited) to attach toan OLAP cube using SQL select statements (not MDX).
Basically, I would like to pull the OLAP data in the relational sense.
Is this possible? If so, are any good articles on this subject?
I'm new to OLAP and would like to transition slowly.
Thanks in advance :)
I am trying to create a query that will pull a variety of data from three different tables. I've had to join four tables because one set of data is in a completely different table.
I am expecting one row of data but instead I get 4 rows. I suspect this is because I am joining a table indirectly. Here is the code:
SELECT
SDH.BatchID,
('0' +
CONVERT (varchar (10), SDH.WorkerID)) AS VendorID,
convert(varchar,( dateadd(hour,-1,SHIT.EndDate) ),101)
+ ' - ' + SDH.Description
[Code] ....
There is only one applicable row in SDH, but four rows appear when I run the query. All four rows are identical except for the GL.GLCode column, which lists the three GL codes associated with the DeductionItems table. The fourth row is a duplicate of the third.
i am completely new to sql but have a need to create a sort of check registry.
the data comes from two separate files like
checks
datenumnameacctamount
09/17/071747companyAtmz187.50
09/18/071748companyBtmz199.24
09/18/079326company1tmz29.65
09/18/071749companyCtmz1103.54
09/20/079327company2tmz255.01
09/20/071750companyDtmz187.12
deposits
datetypeacctamount
09/17/07deposittmz1100.00
09/17/07deposittmz2200.00
09/19/07deposittmz1300.00
09/19/07deposittmz2400.00
i would like something like this as a result
(1st group - tmz1)
09/17/07 1747 companyA tmz1 87.50
09/17/07 deposit tmz1 100.00
09/18/07 1748 companyB tmz1 99.24
09/18/07 1749 companyC tmz1 103.54
09/19/07 deposit tmz1 300.00
09/20/07 1750 companyD tmz1 87.12
(2nd group - tmz2)
09/17/07 deposit tmz2 200.00
09/18/07 9326 company1 tmz2 9.65
09/19/07 deposit tmz2 400.00
09/20/07 9327 company2 tmz2 55.01
but when i form my statement with an inner join, i miss records, with the outer,
i get a ton of records (more than both tables combined).
i have been working with sql for about week now and can do simple queries but this is
beyond me at this point. any help what so ever would be greatly appreciated.
Hi All,
I am working on an application to retrieve data to the windows ce 3.0 handheld from the Sql server database. I am able to retrieve the data from the server using RDA pull method and able to see the data on the local handheld database. To display the retrieved data in the dialog to the user, it requires to query the local databse and get the information and then display the information, which is taking some time.
My question is, to reduce the time and improve the performance , instead of pulling the data to the local table, is there any way to pull the data and have it in memory and display the details to the user?
To develop the above application, I used some of the code to pull the data from the server from the sample application C:Program FilesMicrosoft SQL Server CE 2.0SampleseVCeVCReplRdaHPC. I am developing the application for windows ce 3.0 device using eVC 3.0
thanks
pyd.
Hi,
I am trying to use RDA.pull to pull data from SQL server 2000 to sql mobile, but it fails when some columns are included in the SQLSelectString, though the datatypes involved are only char, float, smallint and smalldatetime, and nothing is longer than 30. Since there is a very large number of columns, it is difficult to isolate the guilty one by trial and error! Coud someone please help?
- Nag Rao
I am building RDA process between SQL server and SQL server CE. Since when we use the method 'SqlCeRemoteDataAccess.pull()', the data will be pulled down from SQL server to CE server and a new table is created with some addtional columns. As I only intend to pull the data and never push it back to SQL server, if I pull the data down for the second time, there will be an error saying that table is already existing. I wonder whether I can pull the data to an existing table everytime I do the RDA?
View 1 Replies View RelatedSome how reason I don't able to pull the data from table and it's giving me following error..I was using just simple select statementÂ
Msg 605, Level 21, State 3, Line 1'
Attempt to fetch logical page (3:10809) in database 9 failed. It belongs to allocation unit 72057616050421760 not to 72057613925351424.
Hi Darren & All,
Thanks! As per your guidance, i have tried in the pull method.Now i am getting error "The LocalTablename parameter is already specified".
Coding as follows:
string rdaOleDbConnectString = @"Provider=SQLOLEDB; Data Source=PRASSANAPRASANA;Initial Catalog=master;User Id=sa;Password=master";
SqlCeRemoteDataAccess rda = null;
try
{
rda = new SqlCeRemoteDataAccess();
rda.LocalConnectionString = "Data Source=E:\SampleTest.sdf";
rda.InternetUrl = "http://192.168.1.118/TEst/sqlcesa30.dll";
rda.InternetLogin = "IUSR_PRASSANA";
rda.InternetPassword = "PRASSANA";
rda.Pull("company", "Select * from company", rdaOleDbConnectString, RdaTrackOption.TrackingOn);
MessageBox.Show("Pull Method");
}
catch (SqlCeException)
{
Message.show(ex.message);
}
finally
{
// Dispose of the RDA Object
//
rda.Dispose();
}
}
Please guide me in detail, what mistake i have done in this method.
Thanks ,
Prasanna.
When I execute the package in Debug mode, it works.
I then import the package into SQL Server 2005 and it is showing under Stored Packages --> MSDB - AS400Package
I can right click and Run Package from there and it works fine.
When I set the package up to run as a job, it fails. What I have noticed is that the Sign On that I use in the package shows that there was in "invalid login" after the job fails.
I hope I have this post in the right place and hope I have left enough information behind to help. If not let know what else I need to post. I have only been using Business Intelligence Development for a couple days and SQL Server 2005 for about a week or so. All of the SQL DTS packages that I have created seem to be working fine with their jobs as well as my stored procedures.
Thanks for any help you can give me.
I have to pull data for a report from 11/1/2013 to date. But once we get to 11/1/2014 then the report should pull data from 11/1/2014 to date and so on. Is there a way to do this? I guess I could go in and change the year manually but was hoping that there was a way to do this automatically.
so today would be
tadate >= '11/1/2013'
but at any point between 11/1/2014 to 10/31/2015 it should be
tadate >= '11/1/2014'
and so on...
I'm currently working with a 10 million plus row database with the dataresiding on a Unix box with Cache 5.0. The problems is that it can take fivedays to pull one table from Cache to SQL 2000 using the ODBC connectionprovided by Cache in a SQL 2000 DTS package. I think the real problem isconverting the data from the post relational format (Cache) to a relationalformat (SQL 2000)???Does anyone have any ideas / suggestions on how to speed this transfer ofdata? I'm very new to Cache and any help would be greatly appreciated.Thanks,-p
View 3 Replies View RelatedHi All,
Anyone have any experience in connecting to a Basis database?
I want to build an SSIS package to ETL data out of a Basis database and into a sql server 2005 db.
I have downloaded the ODBC driver, but am not usre how to plug it in to SSIS to do teh extraction.
Also I am totally new to Basis...it is not an RDBMS at all but the literature says it supports SQL queries, so I am not sure about where to start.
Thanks,
Stephen
Hello All,
I have an application pulling data from SQL Server 2005 which is running on windows mobile 5 devices, and RDA is setup and working perfectly over http and this is in the production for long time, but we have decided to implement SSL for transportation recently and we have a certificate installed to the server and i am trying to pull data using https and getting "the request to send data to the computer running IIS has failed" message, only RDA stopped working over SSL, i can access scripts and other resources from the device using https (I made code to trust any certificate for any web requests) the link to the dll is accessible from outside, i have installed the root certicate on the server, the virtual directory has been changed to communicate via https on web synchronization wizard, then problem occurs, otherwise it will work ok, i am totally stuck at this point, is this a problem with port setup port 443 is opened, the issue is clearly a SSL issue. any help would be appreciated..what are the things to be done to implement SSL for RDA, i don't see anything more in msdn.
thank you so much!
sush