Hello,
I am trying to write a query that solves the following problem:
I want all records from [Table1] that are not referenced in [Table2].
Table2 has a foreign key that points back to the unique identifier of a record in Table1.
I'm not sure how to solve this type of query. I was looking into a left joins, but this is sort of the inverse of what I want to do.
Thank you for your help!
I want to select all usernames from a table EXCEPT the "Admin" username...is this possible with an SQL statement and if so: how?
View 3 Replies View RelatedI have two different views which I've linked together based on 3 different columns. Currently they're linked w/ an INNER JOIN.
What I need to do now, though, is figure out what records exist in one view and not the other. How is this done? I believe I did something like this before where I used an OUTER JOIN and then a "____ is NULL" condition in my WHERE clause, but I can't remember exactly what was going on.
Thanks!
Hi There
I have checked CHECKDB syntax in BOL, i just want to be sure.
In there no way to run CHECKDB on a user database and exclude certain tables, in SS2000.
I have 2 really huge tables , over a billion rows. Nightly i want to run CHECKDB on the database but i do NOT want CHECKTABLE run on these 2 tables as it takes hours.
Or is my only option to instead of running CHECKDB, writing a script that loops through user tables excluding these and running CHECKTABLE. If this is my only option can it be done with a cursor looping through user tables and running CHECKTABLE on each one?
Thanx
Currently, I install an Anti-virus solution on MS SQL Server. It protects windows OS. In order to speed up the SQL performance, I dont want this Anti-virus to scan my SQL database. I want to know what's the exclusion list for the Anti-virus application. Thanks,
View 3 Replies View Relatedbelow is some code I use to identify where a patient has attended the ED department whilst also admitted as an Inpatient. This report works fine. However while most of the results are recording issues to be corrected some of them are real and as so can be excluded from the report.
Is there a way I can build in an exclusion table which would include:
SELECT
IP_ADMISSION.HeyNo AS HEYNo
,IP_ADMISSION.NHSNo2 AS NHSNo
,IP_ADMISSION.Forename AS Forename
,IP_ADMISSION.Surname AS Surname
,IP_ADMISSION.SourceAdmNatCode AS SourceAdm
[code]....
Hi
I have stupid users... who doesn't?! They have entered carriage returns as a whole value in some fields, that is, the field contains nothing more than a carriage return.
I really need to treat these cases as nulls and have successfully removed whole fields of nothing but spaces by using the LTRIM(RTRIM()) construct. Unfortunately, this doesn't deal with carraige returns. Even CASTing and CONVERTing to varchar and then using LTRIM(RTRIM()) doesn't work.
Does anyone know how I can elegantly get around this problem other than my best guess below:
Best guess pseudo code:
IF count of field is greater than 1 THEN probably a full sentence so ignore ELSE SUBSTRING first character and if CHAR(10, etc) then treat as NULL.
Here's some code that reconstructs the problem:
select datalength(char(13)) CarriageReturnVisible
, datalength(ltrim(rtrim(cast(char(13) as varchar)))) [This Don't Work]
Cheers - Andy
I am trying to import data from 4 columns in a spreadsheet, the Columns are (Last Name - First Name - ID - Code) and this spreadsheet has around 10k records. I want to add what is in this spreadsheet to the query I have below that uses the EXCEPT operator but I am not sure the best way to go about it.
Using the example I have filtered below for the name "Denise Test", at the end of the day I want everything that is in the spreadsheet to also be excluded from the results.
So before the spreadsheet lets say the 2nd query referencing table C has the following results for Denise Test
Last_Name First_Name ID Code
Test Denise 1 5
Test Denise 2 4
After adding the spreadsheet I want it to show this:
Last_Name First_Name ID Code
Test Denise 1 5
Test Denise 2 4
Test Denise 3 3
Here is the query as it stands now without the inclusion of the spreadsheet:
SELECT
ta.last_name,
ta.first_name,
tb.ID,
tb.code
FROM
TableA ta
INNER JOIN TableB tb
[code]....
I installed SQL Server 2005 Express Edition on my Laptop for use with IIS 7.0; Everything was working fine untill I opened the Report Server Site with WVD 2008, it asked me to Modify the web.config for debugging. After doing that the Report Server Site started showing an error page saying there was a rsInternal error. I tried fixing the Web.config by hand but it dident work, so I tried completly reinstalling the SQL Server 2005 Express Edition. It reinstalled perfectly excluding the Report Server. When it came time to install the Report Server; I got the error message.
The setup has encountered an unexpected error while Setting reporting service and share point exclusion path. The error is: Fatal error during installation.
--Actual Log--
Microsoft SQL Server 2005 9.00.3042.00
==============================
OS Version : Professional Service Pack 1 (Build 6001)
Time : Mon Apr 14 04:41:42 2008
Machine : JEOSYSTEMS-0002
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.3042.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_SQLSupport_1.log
-----------------------------------------------------------------------------
Machine : JEOSYSTEMS-0002
Product : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_OWC11_1.log
-----------------------------------------------------------------------------
Machine : JEOSYSTEMS-0002
Product : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.2004
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_BackwardsCompat_1.log
-----------------------------------------------------------------------------
Machine : JEOSYSTEMS-0002
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.3042.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_SQLSupport_2.log
-----------------------------------------------------------------------------
Machine : JEOSYSTEMS-0002
Product : Microsoft SQL Server Native Client
Product Version : 9.00.3042.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_SQLNCLI_1.log
-----------------------------------------------------------------------------
Machine : JEOSYSTEMS-0002
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.3042.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_SqlWriter_1.log
-----------------------------------------------------------------------------
Machine : JEOSYSTEMS-0002
Product : Microsoft SQL Server 2005
Product Version : 9.2.3042.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_SQL.log
-----------------------------------------------------------------------------
Machine : JEOSYSTEMS-0002
Product : Reporting Services
Error : The setup has encountered an unexpected error while Setting reporting service and share point exclusion path. The error is: Fatal error during installation.
----------------------------------------------------------------------------
Machine : JEOSYSTEMS-0002
Product : Microsoft SQL Server 2005 Reporting Services
Product Version : 9.2.3042.00
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_RS.log
Last Action : InstallFinalize
Error String : The setup has encountered an unexpected error while Setting reporting service and share point exclusion path. The error is: Fatal error during installation.
Error Number : 29528
-----------------------------------------------------------------------------
If anyone knows how to get Report Services to install after Error number 29528 occurs, Please let me know.
Thanks.
I got this error message during SQL Server Express install with no error code on Server 2003 SP1. I'm installing on an older development machine and although I do have a very large log file somewhere I wanted to post before I even dug into it. I noticed in IIS under my Webs that the MSSQLExpress webs were there at first but when I clicked on them to get any info or Properties... they dissapeared. So they were almost installed but they no longer exist. Also I do not have a SQL Service Manager icon down near the clock.
I almost took a step to fix this. After reading a few posts about similar problems I thought maybe this happened because the Default Web Sites IP # was not set to (All Unassigned). I was going to try a repair install from Add/Remove Programs but the temporary setup files are already gone. I really dont want to uninstall all 5 SQL components from Add/Remove Programs and start from scratch.
As good security practice we usually remove the Default Web or as in this development servers case we changed the IP from (All Unassigned) to an IP that is only accessible from certain machines on the internal network. I obviously should have read more pre setup guides. Anyway how can I fix this without reinstalling everything?
I'm running a query, actually its an insert that works when using the TSQL below.
However when I try to use the debugger to step through and using the exact same values as those below I get the following error:
[Microsoft][ODBC SQL Server Driver]Invalid character value for cast specification
Its Killing me because everything else works, but this. Can somebody help.
DECLARE @NoteID INT,-- NULL OUTPUT,
@Note_Description NVARCHAR(3000),-- = NULL,
@Date DateTime,-- = NULL OUTPUT,
@ByWho NVARCHAR(30),-- = NULL,
@FK_Action_Performed NVARCHAR(40),-- = NULL,
@FK_UserID INT,-- = NULL,
@FK_JobID INT,-- = NULL,
@Job_Date DateTime,-- = NULL,
@Start DateTime,-- = NULL,
@Finish DateTime,-- = NULL,
@BeenRead NVARCHAR(10),-- = NULL
@FK_UserIDList NVARCHAR(4000)-- = NULL
--SET @NoteID = 409 --NULL OUTPUT,
SET @Note_Description = 'Tetsing'
--SET @Date DateTime = NULL OUTPUT,
SET @ByWho = 'GeorgeAgaian'
SET @FK_Action_Performed = 'Worked hard'
SET @FK_UserID = 5
SET @FK_JobID = 29
SET @Job_Date = 28/01/03
SET @Start = '1:00:20 PM'
SET @Finish = '1:00:20 PM'
SET @BeenRead = 'UnRead'
SET @FK_UserIDList = '1,2,3'
--AS
--SET NOCOUNT ON
SET NOCOUNT ON
SET XACT_ABORT ON
BEGIN TRANSACTION
SET @Date = GETDATE()
-- Insert Values into the customer table
INSERT Note (Note_Description,
Date,
ByWho,
FK_Action_Performed,
FK_UserID,
FK_JobID,
Job_Date,
Start,
Finish)
SELECT --@NoteID,
@Note_Description,
@Date,
@ByWho,
@FK_Action_Performed,
@FK_UserID,
@FK_JobID,
@Job_Date,
@Start,
@Finish
-- Get the new Customer Identifier, return as OUTPUT param
SELECT @NoteID = @@IDENTITY
-- Insert new notes for all the users that the note pertains to, in this case this will be by the assigned
-- users.
IF @FK_UserIDList IS NOT NULL
EXECUTE spInsertNotesByAssignedUsers @NoteID, @FK_UserIDList
-- Insert New Address record
-- Retrieve Address reference into @AddressId
-- EXEC spInsertForUserNote
-- @FK_UserID,
--@NoteID,
-- @BeenRead
-- @Fax,
-- @PKId,
-- @AddressId OUTPUT
COMMIT TRANSACTION
--------------------------------------------------
GO
ok can someone tell me why i get two different answers for the same query. (looking for last day of month for a given date)
SELECT DATEADD(ms, - 3, DATEADD(mm, DATEDIFF(m, 0, CAST('12/20/2006' AS datetime)) + 1, 0)) AS Expr1
FROM testsupplierSCNCR
I am getting the result of 01/01/2007
but in query analizer I get the result of
12/31/2006
Why the different dates
Hi,
I get this error dialog when I try to open all the rows of any table from Enterprise manager..
Any help would be really appreciated..
Thanks,
-Srini.
SQL Server 2005 9.0.3161 on Win 2k3 R2
I receive the following error:
"Error: 8624, Severity: 16, State: 1 Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services."
I have traced this to an insert statement that executes as part of a stored procedure.
INSERT INTO ledger (journal__id, account__id,account_recv_info__id,amount)
VALUES (@journal_id, @acct_id, @acct_recv_id, @amount)
There is also an auto-increment column called id. There are FK contraints on all of the columns ending in "__id". I have found that if I remove the contraint on account__id the procedure will execute without error. None of the other constraints seem to make a difference. Of course I don't want to remove this key because it is important to the database integrity and should not be causing problems, but apparently it confuses the optimizer.
Also, the strange thing is that I can get the procedure to execute without error when I run it directly through management studio, but I receive the error when executing from .NET code or anything using ODBC (Access).
Hey, i've written a query to search a database dependant on variables chosen by user etc etc. Opened up a new sqldatasource, entered the query shown below and went on to the test query page. Entered some test variables, everything works as it should do. Try to get it to show in a datagrid on a webpage - nothing. No data shows.
SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches
FROM dbo.MAKES INNER JOIN
dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN
dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN
dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN
dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID
WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or
(ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or
(ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or
(ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) )
GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID
HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END +
CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END +
CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END +
CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2
ORDER BY count(*) DESC
Here is the page source
<%@ Page Language="VB" MasterPageFile="~/MasterPage.master" Title="Untitled Page" %>
<asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>"
SelectCommand="	SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches 	FROM dbo.MAKES INNER JOIN 				 dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN 				 dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN 				 dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN 				 dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID 	WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) ) 	GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID 	HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2 	ORDER BY count(*) DESC ">
<SelectParameters>
<asp:ControlParameter ControlID="DropDownList1" Name="ATT_ID1" PropertyName="SelectedValue" />
<asp:ControlParameter ControlID="TextBox1" Name="VAL1" PropertyName="Text" />
<asp:Parameter Name="ATT_ID2" />
<asp:Parameter Name="VAL2" />
<asp:Parameter Name="ATT_ID3" />
<asp:Parameter Name="VAL3" />
<asp:Parameter Name="ATT_ID4" />
<asp:Parameter Name="VAL4" />
</SelectParameters>
</asp:SqlDataSource>
<asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>"
SelectCommand="SELECT * FROM [ATTRIBUTES]"></asp:SqlDataSource>
<br />
<asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="SqlDataSource2"
DataTextField="ATTRIBUTE_NAME" DataValueField="ATTRIBUTE_ID">
</asp:DropDownList>
<asp:TextBox ID="TextBox1" runat="server" AutoPostBack="True"></asp:TextBox><br />
<br />
<br />
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="DERIVATIVE_ID"
DataSourceID="SqlDataSource1">
<Columns>
<asp:BoundField DataField="DERIVATIVE_ID" HeaderText="DERIVATIVE_ID" InsertVisible="False"
ReadOnly="True" SortExpression="DERIVATIVE_ID" />
<asp:BoundField DataField="Matches" HeaderText="Matches" ReadOnly="True" SortExpression="Matches" />
</Columns>
</asp:GridView>
</asp:Content>
AFAIK I have configured the source to pick up the dropdownlist value and the textbox value (the text box is autopostback).
Am i not submitting the data correctly? (It worked with a simple query...just not with this one). I have tried a stored procedure which works when testing just not when its live on a webpage.
Please help!
(Visual Web Devleoper 2005 Express and SQL Server Management Studio Express)
I have the following code.
SELECT _bvSerialMasterFull.SerialNumber, _bvSerialMasterFull.SNStockLink, _bvSerialMasterFull.SNDateLMove, _bvSerialMasterFull.CurrentLoc,
_bvSerialMasterFull.CurrentAccLink, _bvSerialMasterFull.StockCode, _bvSerialMasterFull.CurrentAccount, _bvSerialMasterFull.CurrentLocationDesc,
_bvSerialNumbersFull.SNTxDate, _bvSerialNumbersFull.SNTxReference, _bvSerialNumbersFull.SNTrCodeID, _bvSerialNumbersFull.SNTransType,
_bvSerialNumbersFull.SNWarehouseID, _bvSerialNumbersFull.TransAccount, _bvSerialNumbersFull.TransTypeDesc,
[code]...
However, as you can see, the original select query is run twice and joined together.What I was hoping for is this to be done in the original query without the need to duplicate the original query.
I'm trying to find the command to open up an odbc conection inside sql2005 express. I only have ues of an odbc connector, we're conection to remedy. We will eventually be using stored procedures to extract the data we need from remedy and doing additional data crunching. I'm a foxpro programmer so once I get the correct syntax for making the odbc connector I shold be ok. Also I need a really good advanced book on sql2005. The type of book that would have my odbc answer. I've spent all morning trying to find this information and was unable to.
Thanks in advance
Daniel Buchanan.
If this was the wrong forum to post this on, please move this question to the correct one. I need this answer soon.
We have a issue with a MDS server that have been over us for a couple of days, the original error msg from SQL Server Engine is the one "The query processor could not produce a query plan" but the ones we get on the Excel-Addin are "Sequece contains no elements" or "The value cannot be null" T
• Using Microsoft SQL Server 2012 (SP1) - 11.0.3393.0 (X64) for 6months on this server without issues
• Two weeks ago we started to have 2 errors: "Sequence Contains No Elements" | "The Value Cannot Be Null"
• We are using the last version of Excel Add-in
• We try to reinstall the MDS feature
• If I backup/restore MDS database to other server it works
• We updated to SQL 2012 SP2 + CU4 but the error persisted ...
Looking at the MDSTraceLog we are routed to the this msg
SQL Error Debug Info: Number: 8624, Message: Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services., Server: bbdvsql03inst01, Proc: udpMetadataEntityGetDetailsXML, Line: 28
At line 28 udpMetadataEntityGetDetailsXML is calling udfMetadataEntityGetDetailsXML … and here is where we stopped
** Error found when try to get data from a entity using Excel add-in **
===================================
Sequence contains no elements
------------------------------
Program Location:
at Microsoft.MasterDataServices.AsyncEssentials.AsyncResultBase.EndInvoke()
at Microsoft.MasterDataServices.ExcelAddInCore.AsyncProviderBase`1.EndOperation(IAsyncResult ar)
[code]....
how do I get the variables in the cursor, set statement, to NOT update the temp table with the value of the variable ? I want it to pull a date, not the column name stored in the variable...
create table #temptable (columname varchar(150), columnheader varchar(150), earliestdate varchar(120), mostrecentdate varchar(120))
insert into #temptable
SELECT ColumnName, headername, '', '' FROM eddsdbo.[ArtifactViewField] WHERE ItemListType = 'DateTime' AND ArtifactTypeID = 10
--column name
declare @cname varchar(30)
[code]...
-- The 3rd query uses an incorrect column name in a sub-query and succeeds but rows are incorrectly qualified. This is very DANGEROUS!!!
-- The issue exists is in 2008 R2, 2012 and 2014 and is "By Design"
set nocount on
go
if object_id('tempdb.dbo.#t1') IS NOT NULL drop table #t1
if object_id('tempdb.dbo
[code]....
This succeeds when the invalid column name is a valid column name in the outer query. So in this situation the sub-query would fail when run by itself but succeed with an incorrectly applied filter when run as a sub-query. The danger here is that if a SQL Server user runs DML in a production database with such a sub-query which then the results are likely not the expected results with potentially unintended actions applied against the data. how many SQL Server users have had incorrectly applied DML or incorrect query results and don't even know it....?
Hello everybody,
I'm developing a report using the following structure :
declare @sql as nvarchar(4000)
declare @where as nvarchar(2000)
set @sql = 'select ....'
If <conditional1>
begin
set @where = 'some where'
end
If <conditional2>
begin
set @where = 'some where'
end
set @sql = @sql + @where
exec(@sql)
I run it in query analyser and works fine, but when I try to run in Reporting Services, Visual studio stops responding and the cpu reaches 100 %.
I realize that when I cut off the if clauses, then it works at Reporting services.
Does anybody know what is happening?
Why the query works in query analyser and doesn't work in Reporting Service ?
Thanks,
Maurício
SQL Server 2012 Performance Dashboard Main advices me this:
Since the application is from a vendor and I have no control over its code, how can improve this sitation?
For each customer, I want to add all of their telephone numbers to a different column. That is, multiple columns (depending on the number of telephone numbers) for each customer/row. How can I achieve that?
I want my output to be
CUSTOMER ID, FIRST NAME, LAST NAME, TEL1, TEL2, TEL3, ... etc
Each 'Tel' will relate to a one or more records in the PHONES table that is linked back to the customer.
I want to do it using SELECT. Is it possible?
do i need to nest a query in RS if i want a calculated column to be compared against a multi value variable? It looks like coding WHERE calcd name in (@variable) violates SQL syntax. My select looked like
SELECT ... ,CASE enddate WHEN null then 1 else 0 END calcd name
FROM...
WHERE ... and calcd name in (@variable)
When viewing an estimated query plan for a stored procedure with multiple query statements, two things stand out to me and I wanted to get confirmation if I'm correct.
1. Under <ParameterList><ColumnReference... does the xml attribute "ParameterCompiledValue" represent the value used when the query plan was generated?
<ParameterList>
<ColumnReference Column="@Measure" ParameterCompiledValue="'all'" />
</ParameterList>
</QueryPlan>
</StmtSimple>
2. Does each query statement that makes up the execution plan for the stored procedure have it's own execution plan? And meaning the stored procedure is made up of multiple query plans that could have been generated at a different time to another part of that stored procedure?
Hi all,
In the Programmability/Stored Procedure of Northwind Database in my SQL Server Management Studio Express (SSMSE), I have the following sql:
USE [Northwind]
GO
/****** Object: StoredProcedure [dbo].[SalesByCategory] Script Date: 03/25/2008 08:31:09 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[SalesByCategory]
@CategoryName nvarchar(15), @OrdYear nvarchar(4) = '1998'
AS
IF @OrdYear != '1996' AND @OrdYear != '1997' AND @OrdYear != '1998'
BEGIN
SELECT @OrdYear = '1998'
END
SELECT ProductName,
TotalPurchase=ROUND(SUM(CONVERT(decimal(14,2), OD.Quantity * (1-OD.Discount) * OD.UnitPrice)), 0)
FROM [Order Details] OD, Orders O, Products P, Categories C
WHERE OD.OrderID = O.OrderID
AND OD.ProductID = P.ProductID
AND P.CategoryID = C.CategoryID
AND C.CategoryName = @CategoryName
AND SUBSTRING(CONVERT(nvarchar(22), O.OrderDate, 111), 1, 4) = @OrdYear
GROUP BY ProductName
ORDER BY ProductName
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
From an ADO.NET 2.0 book, I copied the code of ConnectionPoolingForm to my VB 2005 Express. The following is part of the code:
Imports System.Collections.Generic
Imports System.ComponentModel
Imports System.Drawing
Imports System.Text
Imports System.Windows.Forms
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.Common
Imports System.Diagnostics
Public Class ConnectionPoolingForm
Dim _ProviderFactory As DbProviderFactory = SqlClientFactory.Instance
Public Sub New()
' This call is required by the Windows Form Designer.
InitializeComponent()
' Add any initialization after the InitializeComponent() call.
'Force app to be available for SqlClient perf counting
Using cn As New SqlConnection()
End Using
InitializeMinSize()
InitializePerfCounters()
End Sub
Sub InitializeMinSize()
Me.MinimumSize = Me.Size
End Sub
Dim _SelectedConnection As DbConnection = Nothing
Sub lstConnections_SelectedIndexChanged(ByVal sender As Object, ByVal e As EventArgs) Handles lstConnections.SelectedIndexChanged
_SelectedConnection = DirectCast(lstConnections.SelectedItem, DbConnection)
EnableOrDisableButtons(_SelectedConnection)
End Sub
Sub DisableAllButtons()
btnAdd.Enabled = False
btnOpen.Enabled = False
btnQuery.Enabled = False
btnClose.Enabled = False
btnRemove.Enabled = False
btnClearPool.Enabled = False
btnClearAllPools.Enabled = False
End Sub
Sub EnableOrDisableButtons(ByVal cn As DbConnection)
btnAdd.Enabled = True
If cn Is Nothing Then
btnOpen.Enabled = False
btnQuery.Enabled = False
btnClose.Enabled = False
btnRemove.Enabled = False
btnClearPool.Enabled = False
Else
Dim connectionState As ConnectionState = cn.State
btnOpen.Enabled = (connectionState = connectionState.Closed)
btnQuery.Enabled = (connectionState = connectionState.Open)
btnClose.Enabled = btnQuery.Enabled
btnRemove.Enabled = True
If Not (TryCast(cn, SqlConnection) Is Nothing) Then
btnClearPool.Enabled = True
End If
End If
btnClearAllPools.Enabled = True
End Sub
Sub StartWaitUI()
Me.Cursor = Cursors.WaitCursor
DisableAllButtons()
End Sub
Sub EndWaitUI()
Me.Cursor = Cursors.Default
EnableOrDisableButtons(_SelectedConnection)
End Sub
Sub SetStatus(ByVal NewStatus As String)
RefreshPerfCounters()
Me.statusStrip.Items(0).Text = NewStatus
End Sub
Sub btnConnectionString_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnConnectionString.Click
Dim strConn As String = txtConnectionString.Text
Dim bldr As DbConnectionStringBuilder = _ProviderFactory.CreateConnectionStringBuilder()
Try
bldr.ConnectionString = strConn
Catch ex As Exception
MessageBox.Show(ex.Message, "Invalid connection string for " + bldr.GetType().Name, MessageBoxButtons.OK, MessageBoxIcon.Error)
Return
End Try
Dim dlg As New ConnectionStringBuilderDialog()
If dlg.EditConnectionString(_ProviderFactory, bldr) = System.Windows.Forms.DialogResult.OK Then
txtConnectionString.Text = dlg.ConnectionString
SetStatus("Ready")
Else
SetStatus("Operation cancelled")
End If
End Sub
Sub btnAdd_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnAdd.Click
Dim blnError As Boolean = False
Dim strErrorMessage As String = ""
Dim strErrorCaption As String = "Connection attempt failed"
StartWaitUI()
Try
Dim cn As DbConnection = _ProviderFactory.CreateConnection()
cn.ConnectionString = txtConnectionString.Text
cn.Open()
lstConnections.SelectedIndex = lstConnections.Items.Add(cn)
Catch ex As Exception
blnError = True
strErrorMessage = ex.Message
End Try
EndWaitUI()
If blnError Then
SetStatus(strErrorCaption)
MessageBox.Show(strErrorMessage, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)
Else
SetStatus("Connection opened succesfully")
End If
End Sub
Sub btnOpen_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnOpen.Click
StartWaitUI()
Try
_SelectedConnection.Open()
EnableOrDisableButtons(_SelectedConnection)
SetStatus("Connection opened succesfully")
EndWaitUI()
Catch ex As Exception
EndWaitUI()
Dim strErrorCaption As String = "Connection attempt failed"
SetStatus(strErrorCaption)
MessageBox.Show(ex.Message, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)
End Try
End Sub
Sub btnQuery_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnQuery.Click
Dim queryDialog As New QueryDialog()
If queryDialog.ShowDialog() = System.Windows.Forms.DialogResult.OK Then
Me.Cursor = Cursors.WaitCursor
DisableAllButtons()
Try
Dim cmd As DbCommand = _SelectedConnection.CreateCommand()
cmd.CommandText = queryDialog.txtQuery.Text
Using rdr As DbDataReader = cmd.ExecuteReader()
If rdr.HasRows Then
Dim resultsForm As New QueryResultsForm()
resultsForm.ShowResults(cmd.CommandText, rdr)
SetStatus(String.Format("Query returned {0} row(s)", resultsForm.RowsReturned))
Else
SetStatus(String.Format("Query affected {0} row(s)", rdr.RecordsAffected))
End If
Me.Cursor = Cursors.Default
EnableOrDisableButtons(_SelectedConnection)
End Using
Catch ex As Exception
Me.Cursor = Cursors.Default
EnableOrDisableButtons(_SelectedConnection)
Dim strErrorCaption As String = "Query attempt failed"
SetStatus(strErrorCaption)
MessageBox.Show(ex.Message, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)
End Try
Else
SetStatus("Operation cancelled")
End If
End Sub
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
I executed the code successfully and I got a box which asked for "Enter the query string".
I typed in the following: EXEC dbo.SalesByCategory @Seafood. I got the following box: Query attempt failed. Must declare the scalar variable "@Seafood". I am learning how to enter the string for the "SQL query programed in the subQuery_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnQuery.Click" (see the code statements listed above). Please help and tell me what I missed and what I should put into the query string to get the information of the "Seafood" category out.
Thanks in advance,
Scott Chang
I have two tables .. in one (containing user data, lets call it u).The important fields are:u.userName, u.userID (uniqueidentifier) and u.workgroupID (uniqueidentifier)The second table (w) has fieldsw.delegateID (uniqueidentifier), w.workgroupID (uniqueidentifier) The SP takes the delegateID and I want to gather all the people from table u where any of the workgroupID's for that delegate match in w. one delegateID may be tied to multiple workgroupID's. I know I can create a temporary table (@wgs) and do a: INSERT INTO @wgs SELECT workgroupID from w WHERE delegateID = @delegateIDthat creates a result set with all the workgroupID's .. this may be one, none or multipleI then want to get all u.userName, u.userID FROM u WHERE u.workgroupIDThis query works on an individual workgroupID (using another temp table, @users to aggregate the results was my thought, so that's included) INSERT INTO @users SELECT u.userName,u.userID FROM tableU u LEFT JOIN tableW w ON w.workgroupID = u.workgroupID WHERE u.workgroupID = @workGroupIDI'm trying to avoid looping or using a CURSOR for the performance hit (had to kick the development server after one of the cursor attempts yesterday)Essentially what I'm after is: SELECT u.userName,u.userID
FROM tableU u
LEFT JOIN tableW w ON w.workgroupID = u.workgroupID
WHERE u.workgroupID = (SELECT workgroupID from w WHERE delegateID = @delegateID) ... but that syntax does not work and I haven't found another work around yet.TIA!
When I run the following query from Query Analyzer in SQL Serer 2005, I get a message back that says.
Command(s) completed successfully.
What I really need it to do is to display the results of the query. Does anyone know how to do this?
declare @SniierId as uniqueidentifierset @SniierId = '85555560-AD5D-430C-9B97-FB0AC3C7DA1F'declare @SniierAlias as nvarchar(50)declare @AlwaysShowEditButton as bitdeclare @SniierName as nvarchar (128)/* Check access for Sniier */SELECT TOP 1 @SniierName = Sniiers.SniierName, @SniierAlias = Sniiers.SniierAlias, @AlwaysShowEditButton = Sniiers.AlwaysShowEditButtonFROM SniiersWHERE Sniiers.SniierId=@SniierId
I am trying to run queries against any of the user tables in my MS SQL 7.0 database. I get a message the Query Designer encountered a query error.
We have tried rebooting the SQL Server and I am still getting these messages. Also, the SQL error logs look fine - all database
maintenance are running successfully including the DBCCs which show no errors. Any help would be greatly appreciated as we are to go
into production in a few days.
How to optimize the following Stored procedure running on MSSQL server 2000 sp4 :
CREATE PROCEDURE proc1
@Franchise ObjectId
, @dtmStart DATETIME
, @dtmEnd DATETIME
AS
BEGIN
SET NOCOUNT ON
SELECT p.Product
, c.Currency
, c.Minor
, a.ACDef
, e.Event
, t.Dec
, count(1) "Count"
, sum(Amount) "Total"
FROM tb_Event t
JOIN tb_Prod p
ON ( t.ProdId = p.ProdId )
JOIN tb_ACDef a
ON ( t.ACDefId = a.ACDefId )
JOIN tb_Curr c
ON ( t.CurrId = c.CurrId )
JOIN tb_Event e
ON ( t.EventId = e.EventId )
JOIN tb_Setl s
ON ( s.BUId = t.BUId
and s.SetlD = t.SetlD )
WHERE Fran = @Franchise
AND t.CDate >= @dtmStart
AND t.CDate <= @dtmEnd
AND s.Status = 1
GROUP BY p.Product
, c.Currency
, c.Minor
, a.ACDef
, e.Event
, t.Dec
RETURN 1
END
GO
I am able to run a query which runs FAst in QA but slow in theapplication.It takes about 16 m in QA but 1000 ms on theApplication.What I wanted to know is why would the query take a longtime in the application when it runs fast on SQL server?How should we try debugging it?Ajay
View 2 Replies View RelatedHi there. I have occasional sincronization error.-XSUBSYSTEM Merge
-XSERVER MYSERVER
-XCMDLINE 0
-XCancelEventHandle 000006E0
2006-12-22 14:55:00.833 Connecting to Subscriber 'Subscriber01'
2006-12-22 14:55:00.895 Connecting to Distributor 'Publisher01'
2006-12-22 14:55:02.974 Initializing
2006-12-22 14:55:03.083 Connecting to Publisher 'Publisher01'
2006-12-22 14:55:06.005 Retrieving publication information
2006-12-22 14:55:06.130 Retrieving subscription information.
2006-12-22 15:00:07.222 The merge process failed to execute a query because the query timed out. If this failure continues, increase the query timeout for the process. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write.
2006-12-22 15:00:07.456 Error converting data type nvarchar to numeric.
2006-12-22 15:00:07.800 Category:SQLSERVER
Source: Subscriber01
Number: 8114
Message: Error converting data type nvarchar to numeric.
After manual syncronization it goes under control.
Could anybody explain the relationship between converting error and timed out query?
If this is poor connection's problem how can I increase the query timeout for the process?
Hi Everyone:
*Before* I actually call up Microsoft SQL Customer Support Services and ask them, I wanted to ping other people to see if you have ever ran into this exact error
"Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services."
I would have searched the forums myself, but at this moment in time, search is broken :(
If anyone has run into this error before, what conditions would exist that this could happen? That is, if I can sniff this out with suggestions from the community, I would be happy to do so.
It is an oddity because if I alter a couple subqueries in the where clause [ i.e., where tab.Col = (select val from tab2 where id='122') ]to not have subqueries [hand coded values], then the t-sql result is fine. It's not as if subqueries are oddities... I've used them when appropriate.
fwiw - Not a newbie t-sql guy. ISV working almost daily with t-sql since MS SQL 2000. I have never seen this message before...at least I don't recall ever seeing it.
Thanks in advance for other suggested examination paths.