Code:
exec('select RIGHT(00000 + CAST(dh.zipcode AS varchar(5)), 5) as zip, '+@fieldname +' as distance into #distance from sumplicity.dbo.t_distancetohospital dh')
This runs normally and returns the number of rows created. Yet when I do a 'select * from #distance' query, I get a message that #distance doesn't exist.
Where is it storing all of this and how do I access it?
Hello all,
I have two mult-value parameters in my report. Both of them working with selecting one or more values. But, when I test using "(Select All)" values for both parameters , only one parameter works. The "available values" for these two parameters are both from the data set.
select distinct ProductType
from Product
order by ProductType
Any suggestion? thx
Bob writes "Your FAQ asks an intersting question:
Why doesn't SELECT @columns FROM @tablname work?
No answer is provided however.
I need to write a stored procedure the passes in a fieldname, retrives next key type int data from that field, increments the field, and returns the NextKey.
Would be nice if something like this worked:
DECLARE @iNext INT
SELECT @iNext = SELECT @columnName FROM Next_Keys WHERE ID = 1
SELECT @iNext = @iNext +1
UPDATE Next_Keys Set @columnName = @iNext WHERE ID = 1
RETURN @iNext
SQL Server 2000 - Win Server 2003
Editing SP from VS2005
TSQL newbe writing first sp"
My report runs from a stored proc, which gets the user to input a project id and a status. So the where statement in my stored proc looks like this:
Where (p.project LIKE @project_ID + '%' AND p.status IN(@Active))
On my report, I have set the @Active parameter to multi-value, and entered the available values(active and inactive). When I run the report, and only select one of the values, the report runs just fine, but when I use the "select all" option, I get no results at all.
I can't see where I am going wrong. Anyone got any ideas?
Thanks in advance!
Hi group,
I don't know what I should try next, all of my tries have been without results in this case. I just wanted to create a temporary table, then insert one row into it and then use this row to compare if this row exists in another table or not. This is my script:
------------------------
CREATE PROCEDURE imp_Tippimport (@TGName char(33)) AS
BEGIN
CREATE TABLE #tTippgeber (
TGName2 char(33)
)
INSERT INTO #tTippgeber (TGName2)
VALUES (@TGName)
*** see below ***
IF NOT exists (select TGName FROM Tippgeber WHERE TGName = @TGName)
INSERT INTO Tippgeber SELECT TGName2 FROM #tTippgeber
/* SELECT * INTO Tippgeber FROM #tTippgeber */
ELSE
UPDATE Tippgeber SET
TGName = t.TGName2
FROM #tTippgeber AS t, Tippgeber
WHERE TGName = t.TGName2
END
GO
I also created a cursor and used a fetch in to a veriable in the line with the stars to see the value of TGName2 but it was NULL.
Any ideas ?!
Thanks for any help !!
Sascha
I administer several servers. My login is a SysAdmin on all servers with not only the same Name and Password, but also the same SID. In setting up Linked Servers, I can successfully SELECT data from a server other than the host server, but if I try to SELECT * INTO I get the following error:
The object name 'DB1.ogSerial.dbo.' contains more than the maximum number of prefixes. The maximum is 2.
Here are the queries I've tried (using DB3 as the host, DB1 as the linked server).
SELECT * INTO DB1.MyDB.dbo.TestTableNew FROM DB3.MyDB.dbo.TestTable
SELECT * INTO DB1.MyDB.dbo.TestTableNew FROM DB1.MyDB.dbo.TestTable
SELECT * INTO DB1.MyDB.dbo.TestTableNew FROM MyDB.dbo.TestTable
I am writing some functions that work on a time series database of prices, ie volatility, correlation. I need to use the SELECT TOP syntax, but cannot do this with a variable, ie 'SELECT @x TOP * from prices'. My solution is to simply have a function for each potential period that will be looked at - 30day_volatility, 60day_volatility, etc. I looked at setting the ROWCOUNT variable but this is not allowed in functions. I haven't posted any DDL because I think the question is general enough - How do I return n ordered rows from a function without using SELECT TOP, or is there a way to use SELECT TOP with a variable that I am not aware of.
Thanks!
Hello to all,
i have a problem with IN-Operator. I cann't resolve it. I hope that somebody can help me.
I have a IN_Operator sql query like this, this sql query can work. it means that i can get a result 3418:
declare @IDM int;
declare @IDO varchar(8000);
set @IDM = 3418;
set @IDO = '3430'
select *
from wtcomValidRelationships as A
where (A.IDMember = @IDM) and ( @IDO in (3428 , 3430 , 3436 , 3452 , 3460 , 3472 , 3437 , 3422 , 3468 , 3470 , 3451 , 3623 , 3475 , 3595 , 3709 , 3723 , 3594 , 3864 , 3453 , 4080 ))
but these numbers (3428 , 3430 , 3436 , 3452 , 3460 , 3472 , 3437 , 3422 , 3468 , 3470 , 3451 , 3623 , 3475 , 3595 , 3709 , 3723 , 3594 , 3864 , 3453 , 4080 ) come from a select-statement. so if i use select-statement in this query, i get nothing back. this query like this one:select *
from wtcomValidRelationships as A
where (A.IDMember = @IDM) and ( @IDO in (select B.RelationshipIDs from wtcomValidRelationships as B where B.IDMember = @IDM))
I have checked that man can use IN-Operator with select-statement. I don't know why it doesn't work with me. Could somebody help me? Thanks
I use MS SQL 2005 Server Management Stadio Express
Thanks a million and Best regards
Sha
Hi!
I have several problems of my coding, please give me some advice.
1. How to let result data place at temptable temperary for other mapping? should i create temptable first ?
2. When I got the duplicated record result, I require to map with the main tables (tblROrder & tblSOrder)to find out the record reference no. Please advice how to handle this issue with reference no. at the outcome.
Many thanks,
New Learner
***Coding as following
SELECT code, SMSNo, holderNo, count(*) From tblROrder
WHERE Day = @Day
GROUP BY code, SMSNo, SholderNo
HAVING COUNT(*) > 1<=====result will be found, but since i didn't get the RefNo at the listing, please advise how to let the outcome with RefNo
INTO #tmpOne (code, SMSNo, holderNo) <====error found
SELECT code, SMSNo, holderNo, GrossAmt, count(*) From tblSOrder
WHERE Day = @prmDay between D1 AND D14
GROUP BY code, SMSNo, holderNo, GrossAmt
HAVING COUNT(*) > 1<=====result will be found, but since i didn't get the RefNo at the listing, please advise how to let the outcome with RefNo
INTO #tmpTwo (code, SMSNo, holderNo) <====error found
Hi,
If any one could suggest if Is it possible to make a JOIN of two different select statements.
SELECT PartNumber,SUM(Value) FROM dbo.List_Parts where PartNumber like '%TX'
To be Joined with
SELECT PartNumber,COUNT(PartNumber) FROM dbo.List_Orders where Part Number like '%TX'
The result should be:
PartNumber , SUM(Value),COUNT(PartNumber)
Hi everybody,
I have this problem I have been struggling with for more than an hour now, hoping for some help.
Using SQL Server 2005.
DECLARE @IPAddress nvarchar(15)
SET @IPAddress = '127.0.0.1'
DECLARE @UA nvarchar(300)
SET @UA = 'MSIE'
DECLARE @UserID int
SET @UserID = 123
EXEC sp_executesql N'User_LogonLog',N'@UserID int, @IPAddress nvarchar(15), @UA nvarchar(300)',@UserID,@IPAddress,@UA
It keeps given me the following error:
Msg 102, Level 15, State 1, Line 1
Incorrect syntax near 'User_LogonLog'.
In my head it should be perfectly valid syntax. I have also read Mr. Sommarskog's nice guide http://www.sommarskog.se/dynamic_sql.html, but no luck either..
I have tried to remove datatypes in parameters declaration, the Unicdode N' and so... nu luck.
If I run the following (without sp_executesql) there is no problem, which indicates the User_LogonLog procedure is work perfectly fine.
EXEC User_LogonLog @UserID,@IPAddress,@UA
What am I missing?
i know this topic has been covered and i've searched but i can't find the answer.
-SQL server is a diffrent server than my backup server
-i've installed the sql agent option on the backup exec server
-i've installed the client network utility on the remote server
the backup server doesn't see the SQL server databases. any thoughts
could it be a security issue?
thanks!
I'm pretty new to DTS, so forgive me if this is basic. I created a simple DTS package to run a query and export it to a text file. I can execute the package fine from my workstation through EM, but when I try to execute the job to run the package I get this error:
Error = -2147467259 (80004005) Error string: Error opening datafile: Access is denied.
I think that maybe SQL Agent doesn't have the right permissions to write to that network drive. What should the permissions be?
This is probably very simple, but I can't get passed this problem.
I have a report in MS Access that uses info generated by a query. One of the text fields in the query contains either the word 'Select' or the name of a course.
The report should display a space if the value is 'Select', or the actual value of the field in any other case. The field can never contain a null value.
I've used:
=IIf([optVoc1]="Select","",[optVoc1])
in the text box on the report, but this only returns #error regardless of the actual content of the field.
What am I doing wrong?
Regards,
BD
Hi all,
I create and schedule a SQL job to run every minute to update a table base on certain condition but it doesn't work. Job history says successful every time but the table doesn't get updated.
However if I move it to Query Analyzer and run it under dba, it will work. Thinking that it may have to do with the user the job run as, I then change run as user from self to dba. But still SQL job won't update my table.
Anything about user permission or security that I can check? Or it there any other possibility?
TIA
When I run the select its fine but I cannot delete..... i have done this many times and it has worked.... I cannot see the error what am i missing
select
eqnow.empnumber,
eqnow_names.empnumber,
eqnow_names.names
--delete
from
eqnow
inner join eqnow_names
on eqnow.empnumber = eqnow_names.empnumber
where
eqnow_names.names is null
i get this error
Server: Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'inner'.
Msg 15123, Level 16, State 1, Procedure sp_configure, Line 78
The configuration option 'user instances enabled' does not exist, or it may be an advanced option.
Valid configuration options are
Hi to all, I'm building (and learn) an application with VB Express. In "edit dataset with designer" I've build this sql query:
SELECT tbl_soggetto.[ID Soggetto], tbl_soggetto_tipo.Tipo, tbl_soggetto.[Cognome/Denominazione], tbl_soggetto.Nome, tbl_soggetto.Indirizzo, tbl_soggetto.CAP, tbl_soggetto.Città , tbl_soggetto.Provincia, tbl_soggetto.[Telefono 1], tbl_soggetto.[Telefono 2], tbl_soggetto.[Telefono 3], tbl_soggetto.[Telefono 4], tbl_soggetto.[eM@il 1], tbl_soggetto.[eM@il 2], tbl_soggetto.Note
FROM tbl_soggetto INNER JOIN tbl_soggetto_tipo ON tbl_soggetto.[ID Tipo] = tbl_soggetto_tipo.[ID Tipo]
WHERE (tbl_soggetto.[Cognome/Denominazione] LIKE '%' + @Testo + '%')
The LIKE doesn't work!
I call the query with Me.griglia.DataSource = Me.TA_tbl_soggetto_ricerca.Search_Cognome(Me.txt_trova.Text.Trim)
But with LIKE '%ABC%' work!
Me.griglia.DataSource = Me.TA_tbl_soggetto_ricerca.Search_Cognome()
Someone can help me? Thanks...
When I try to install the problem I get the following error.
The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The log tells me nothing useful. I can't start the thing manually because after clicking cancel on the error message, the installer proceeds to roll back the installation.
How do I fix this problem?
This is the autogenerated code from the SelectCommand of my DataAdapter, except the red text. This DataAdapter is used to fill a DataGrid. What I want to do, is to calculate the total memory (4 slots) / PC.This code makes the sum of all memory of all PC's together.I'm not sure if the group by clause is needed here ...Me.OleDbSelectCommand1.CommandText = "SELECT PC.ID, PC.Nummer, PC.Netwerknaam, Case_Type.Type AS Case_Type, Processor_T" & _"ype.Type AS Processor_Type, Processor_Snelheid.Snelheid AS Processor_Snelheid, " & _"(SELECT SUM(Memory) FROM Memory, PC, RAM WHERE RAM.PcID = PC.ID AND RAM.GrootteID = Memory.ID)" & _"AS Memory, OS.Naam AS OS, OS_SP.Nummer AS OS_SP, Gebru" & _"iker.Naam AS Gebruiker_Naam, Status.Status, PC.Tagged FROM (Status RIGHT OUTER J" & _"OIN ((((((((PC LEFT OUTER JOIN (RAM LEFT OUTER JOIN Geheugen ON RAM.GrootteID = " & _"Geheugen.ID) ON PC.ID = RAM.PcID) LEFT OUTER JOIN Case_Type ON PC.Case_TypeID = " & _"Case_Type.ID) LEFT OUTER JOIN OS_SP ON PC.OS_SpID = OS_SP.ID) LEFT OUTER JOIN Ge" & _"bruiker ON PC.GebruikersID = Gebruiker.ID) LEFT OUTER JOIN Processor_Snelheid ON" & _" PC.Processor_SnelheidID = Processor_Snelheid.ID) LEFT OUTER JOIN Processor_Type" & _" ON PC.Processor_TypeID = Processor_Type.ID) LEFT OUTER JOIN OS ON PC.OsID = OS." & _"ID) LEFT OUTER JOIN Switchbox_Details ON PC.ID = Switchbox_Details.PcID) ON Stat" & _"us.ID = PC.StatusID) GROUP BY PC.ID, PC.Nummer, PC.Netwerknaam, Case_Type.Type, " & _"Processor_Type.Type, Processor_Snelheid.Snelheid, OS.Naam, OS_" & _"SP.Nummer, Gebruiker.Naam, Status.Status, PC.Tagged"I would like to know how to calculate the total memory for each separate PC.Hope you can help me.
View 5 Replies View RelatedI had a SQL Server falure. I rebiuld Master and tried to attach my database
with sp_attach_db? but get an error
Location: pageref.cpp:3931
Expression: rowLog.RowCount () == 1 || pPage->IsEmpty ()
SPID: 10
Process ID: 119
Connection Broken
I try to copy a DB from one server to another. On the target server an older version of the DB has been deleted and I now try to attach the new version using "sp_attach_db DBname, Filelocation", but I always get an error "Device Activation error. The physical file name 'D:mssql7dataAgency_log.ldf' may be incorrect"
"Database 'Agency' cannot be Created"
To me it seems that the database is looking for the log files (now deleted).
I've tried forcing a new log file I created using the same locations for the mdfs. I've tried using create a new database and replace the mdf file, but nothing works.
Hi,
I wanted to create a new trigger, but Enterprise Manager tells me about an "Incorrect syntax near @UpdatedByID, line 28". I double-checked everything, but it still does not work :mad: .
Any hints :confused: ?
TIA,
-Gernot
Here is the statement (line 28 is marked with ***):
CREATE TRIGGER TransferToABII ON [dbo].[CALGeneral]
FOR INSERT
AS
BEGIN TRANSACTION
BEGIN
DECLARE @Event varchar(255),
@BBaseUID int,
@StartDate smalldatetime,
@EndDate smalldatetime,
@Details varchar(255),
@AddressID int,
@ProjectID int,
@UpdatedByID int,
@ActID int,
@EventID int
SELECT @Event = Event,
@BBaseUID = BBaseUID,
@StartDate = StartDate,
@EndDate = EndDate,
@Details = Details,
@AddressID = AddressID,
@UpdatedByID = UpdatedBy,
@ProjectID = ProjectID
FROM INSERTED
BEGIN
EXEC BrainBase.dbo.BB_NEW_CREATE_NoteTask_Ret *** (@UpdatedByID,
@AddressID,
@ProjectID,
@BBaseUID,
@StartDate,
GetDate(),
@Event,
NULL,
NULL,
NULL,
NULL,
@Details text,
@ActID = @ActID OUTPUT,
@EventID = @EventID OUTPUT)
END
BEGIN
UPDATE CALGeneral SET ActID = @ActID WHERE ID = INSERTED.ID
END
END
IF @@ERROR <> 0
BEGIN
RAISERROR('Error occured',16,1)
ROLLBACK TRANSACTION
END
COMMIT TRANSACTION
I'm working with mssql 6.5
I have an primary key column with Identity property.
And at the moment server doesn't insert the proper value to this column.
Error message is following
Msg 2601, Level 14, State 3
Attempt to insert duplicate key row in object 'Spot' with unique index 'XPKSpot'
Command has been aborted.
The datatype of this column is int, and number of rows ~17000.
If I execute select @@identity it returns null.
I'm combining first name, last name, middle name, and an ID number together into an alias. Then I need to match that alias with a variable passed to the page (its a search results page). The problem is it claims that there is no table with the name of my alias. Anyone know what I'm doing wrong?
A mockup of the SQL looks like this:
SELECT UserID, Last_Name + ', ' + First_Name + ' ' + Middle_Name + '.' AS name
FROM Table
WHERE name LIKE 'variable%'
Everything looks right with the results, if I take out the WHERE clause it has name displayed properly and joined together with the rest of the data in the results properly.
Thanks in advance for any help that can be provided!
I have a query that doesn't work when i use 4 name convention instead of a openquery. The msg is below. Anyone know what is going on?
Both queries are the same but one doesn't work.
-- works
SELECT TOP 1 * FROM OPENQUERY(AS400_PROD, 'SELECT * FROM PPTREASUSA.ORDDET')
-- doesnt work
SELECT TOP 1 * FROM AS400_PROD.S1030Y3M.PPTREASUSA.ORDDET
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'MSDASQL' reported an error.
[OLE/DB provider returned message: Unspecified error]
[OLE/DB provider returned message: [IBM][iSeries Access ODBC Driver][DB2 UDB]CPF5715 - File ORDDET01 in library QTEMP not found.]
OLE DB error trace [OLE/DB Provider 'MSDASQL' IDBSchemaRowset::GetRowset returned 0x80004005: ].
http://www.sqlserverstudy.com
hi all,
i made a stored procedure that uses the sp_send_dbmail to send mails. SQL server dislays the message "mail queued" but nothing is recieved
here is the code of the stored procedure i made
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'Exams',
@recipients = 'me@domain.com',
@Body_format = 'HTML' ,
@subject = 'Room Preparation' ,
@body='hi there';
so can anyone help with this issue
thanks in advance
I have a drill through that passes four parameters. Three are passed from the current selections in that reports parameters and the fourth needs to be the customer name they click on in the body of the report so it's passed as Fields!fieldname.Value. When I click on the customer name, the drillthough fires but the report simply doesn't load. If I remove the parameter from the field clicked on and just pass the three parameters, it goes to the drill through correctly and that fourth parameter just sets to the default for that parameter in that report.
I can then simply check that parameter and select the value from the list that is exactly the same as the value I was attempting to pass it in the drill through and report refreshes correctly.
Whatever it is, is something in the manner that the value is passed in the drill through specifically.
Any ideas?
Hello,
I've rescued a MDF and LDF files off a client's old server, and I wanted to attach it to our own, but I can't seem to get the command to work, basically I have these two files, which I've dropped on our server:
C:Program FilesMicrosoft SQL ServerMSSQLDataMYCLIENTNAME_Data.MDF
C:Program FilesMicrosoft SQL ServerMSSQLDataMYCLIENTNAME_Data.LDF
So when I do a
SP_ATTACH_SINGLE_FILE_DB 'somedb','C:Program FilesMicrosoft SQL ServerMSSQLDataMYCLIENTNAME_Data.MDF'
It says the LDF path my be incorrect, and that there's two other files that are missing:
MYCLIENTNAME_LOG (no extension)
extra_log (no extension)
I thought the whole point of the command is that you only need a single file?
Its very hard to go back to the client's old server and try to find these two files, and it doesn't really matter if we loose a bit of data, so long as the bulk of it is available.
Update: I think I've found the answer...its not possible to do this, it really needs all the log files.
Any workarounds?
This works:
-- authenticator
CREATE FUNCTION [dbo].[cc2_Helper]( @SecretData VARBINARY(256), @cId INT )
RETURNS NVARCHAR(50)
WITH EXECUTE AS 'DBO'
AS
BEGIN
RETURN convert( NVARCHAR(50), decryptbykeyautocert( cert_id( 'cert_SecretTable_SecretData_Key' ), null, @SecretData, 1, convert(varbinary, @cId) ) )
END
go
CREATE VIEW [dbo].[cc2View2]
AS
SELECT CardID as CardID, [dbo].[cc2_Helper](CardNumber, CardID) as CardNumber FROM [dbo].[cc2]
go
GRANT SELECT ON [dbo].[cc2View2] TO [user_low_priv]
This doesn't:
-- auth2/view3
CREATE FUNCTION [dbo].[cc2_Helper2]( @SecretData VARBINARY(256), @vBin VARBINARY )
RETURNS NVARCHAR(50)
WITH EXECUTE AS 'DBO'
AS
BEGIN
RETURN convert( NVARCHAR(50), decryptbykeyautocert( cert_id( 'cert_SecretTable_SecretData_Key' ), null, @SecretData, 1, @vBin ) )
END
go
CREATE VIEW [dbo].[cc2View3]
AS
SELECT CardID as CardID, [dbo].[cc2_Helper2](CardNumber, convert(varbinary, CardID)) as CardNumber FROM [dbo].[cc2]
go
GRANT SELECT ON [dbo].[cc2View3] TO [user_low_priv]
WHY? Note that the conversion to VARBINARY was moved from the call to DecryptByKeyAutoCert to the call to cc2_Helper2. That is the only change...
But if I declare @vBin as VARBINARY(256) then it does work! Guess I'm a little confused on declaring vars...anyone can elucidate? Thanks.
In the Data Source Wizard the "insert,delete,update" advanced options are greyed out.
The table's PK is not an identity, but a uniqueidentifier.
I have been looking at this for over a day now. I cannot see why this procedure does not work, its so simple.
No matter what happens it always returns 0. If it locates a record, it doesnt update it, yet it still returns 0.
It should not be returning 0 if its not updating so I can't figure out why it does.
Why does this always return 0?
[pre]Create Procedure CreateNewCategory @title nvarchar(100), @description nvarchar(1000), @displayOrder intAS DECLARE @Result as int
IF EXISTS(SELECT categoryTitle FROM categories WHERE categoryTitle = @title) BEGIN SELECT @Result = 1 ENDELSE BEGIN INSERT INTO categories(categoryTitle, categoryDescription, displayOrder) VALUES(@title, @description, @displayOrder) /* If no error was encountered, 0 will be returned. */ SELECT @Result = @@Error ENDGO[/pre]
Thanks!
Since I have to go across the network, I'm trying to use the UNC. However, this won't even work when I'm using the UNC to point to the server on which this is run. I'm trying to restore a single table on 6.5. What is the obvious piece that I'm missing?
This works.
LOAD TABLE address
FROM DISK = 'd:MSSQLackupDBBackup.DAT'
WITH source='address'
This doesn't.
LOAD TABLE address
FROM DISK = 'server1d$MSSQLackupDBBackup.DAT'
WITH source='address'