Is there a way to execute a report from a stored procedure and then wait for a status of the report? For example this would be my wish-list code:
declare @rc int
exec @rc=DoReport @reportName='Test Report', @Output='Email', @To='test@test.com', etc...
if @rc=0
-- Everything worked!
else
-- We have a problem
Thanks,
Stuart Fox
I am tring to fiqure out how i can run a TSQL and the have it start again 60 sec after it compleats, without me have to push the button. I just need it to loop over and over until my data is deleted. I have to do it this way so my site will still allow customers to login and I need the break so they can. Any help would be great.
View 3 Replies View RelatedI am building a stored procedure that changes based on the data that is available to the query. See below.
The query fails on line 24, I have the line highlighted like this.
Can anyone point out any problems with the sql?
------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------
This is the error...
Msg 8114, Level 16, State 5, Procedure sp_SearchCandidatesAdvanced, Line 24
Error converting data type varchar to numeric.
------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------
This is the exec point...
EXEC [dbo].[sp_SearchCandidatesAdvanced]
@LicenseType = 4,
@PositionType = 4,
@BeginAvailableDate = '10/10/2006',
@EndAvailableDate = '10/31/2007',
@EmployerLatitude = 29.346675,
@EmployerLongitude = -89.42251,
@Radius = 50
GO
------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------
This is the STORED PROCEDURE...
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[sp_SearchCandidatesAdvanced]
@LicenseType int = 0,
@PositionType int = 0,
@BeginAvailableDate DATETIME = NULL,
@EndAvailableDate DATETIME = NULL,
@EmployerLatitude DECIMAL(10, 6),
@EmployerLongitude DECIMAL(10, 6),
@Radius INT
AS
SET NOCOUNT ON
DECLARE @v_SQL NVARCHAR(2000)
DECLARE @v_RadiusMath NVARCHAR(1000)
DECLARE @earthRadius DECIMAL(10, 6)
SET @earthRadius = 3963.191
-- SET @EmployerLatitude = 29.346675
-- SET @EmployerLongitude = -89.42251
-- SET @radius = 50
SET @v_RadiusMath = 'ACOS((SIN(PI() * ' + @EmployerLatitude + ' / 180 ) * SIN(PI() * p.CurrentLatitude / 180)) + (COS(PI() * ' + @EmployerLatitude + ' / 180) * COS(PI() * p.CurrentLatitude / 180) * COS(PI()* p.CurrentLongitude / 180 - PI() * ' + @EmployerLongitude + ' / 180))) * ' + @earthRadius
SELECT @v_SQL = 'SELECT p.*, p.CurrentLatitude, p.CurrentLongitude, ' +
'Round(' + @v_RadiusMath + ', 0) AS Distance ' +
'FROM ProfileTable_1 p INNER JOIN CandidateSchedule c on p.UserId = c.UserId ' +
'WHERE ' + @v_RadiusMath + ' <= ' + @Radius
IF @LicenseType <> 0
BEGIN
SELECT @v_SQL = @v_SQL + ' AND LicenseTypeId = ' + @LicenseType
END
IF @PositionType <> 0
BEGIN
SELECT @v_SQL = @v_SQL + ' AND Position = ' + @PositionType
END
IF LEN(@BeginAvailableDate) > 0
BEGIN
SELECT @v_SQL = @v_SQL + ' AND Date BETWEEN ' + @BeginAvailableDate + ' AND ' + @EndAvailableDate
END
--SELECT @v_SQL = @v_SQL + 'ORDER BY CandidateSubscriptionEmployerId DESC, CandidateFavoritesEmployerId DESC, Distance'
PRINT(@v_SQL)
EXEC(@v_SQL)
-----------------------------------------------------------------------------------------------------------------
Hi,
Our report is working fine with data loaded from a stored procedure (#1) that contains a fairly simple Select statement. We need the same report to work with a dataset loaded from a stored procedure (#2) that uses 'Exec sp_executesql @queryString'. Unfortunately, attempts to call the latter cause an error in the report. From everything that I've read, there should be no difference between datasets created using either method. Any ideas what could be getting in the way of the latter?
I have doublechecked that the dynamic query is returning a valid dataset and that all the columns are in the same format as sp #1. The designer shows the dataset and the report with the data loaded, but the live system produces an error.
Any help is much appreciated.
Debbie
I can see report builder in IE (I am report admin), but my users are not able to, despite having ticked 'report builder' against their name in folder security.
They have
Browser, Report Builder
Why can't they see it?
"Site Settings - Security - Config sys wide role defs - sys user " has "execute report defs" ticked.
Anyone, hmm?
Can anyone please give me the equivalent tsql for sql server 2000 for the following two queries which works fine in sql server 2005
1
-- Full Table Structure
select t.object_id, t.name as 'tablename', c.name as 'columnname', y.name as 'typename', case y.namewhen 'varchar' then convert(varchar, c.max_length)when 'decimal' then convert(varchar, c.precision) + ', ' + convert(varchar, c.scale)else ''end attrib,y.*from sys.tables t, sys.columns c, sys.types ywhere t.object_id = c.object_idand t.name not in ('sysdiagrams')and c.system_type_id = y.system_type_idand c.system_type_id = y.user_type_idorder by t.name, c.column_id
2
-- PK and Index
select t.name as 'tablename', i.name as 'indexname', c.name as 'columnname' , i.is_unique, i.is_primary_key, ic.is_descending_keyfrom sys.indexes i, sys.tables t, sys.index_columns ic, sys.columns cwhere t.object_id = i.object_idand t.object_id = ic.object_idand t.object_id = c.object_idand i.index_id = ic.index_idand c.column_id = ic.column_idand t.name not in ('sysdiagrams')order by t.name, i.index_id, ic.index_column_id
This sql is extracting some sort of the information about the structure of the sql server database[2005]
I need a sql whihc will return the same result for sql server 2000
I have two SQL Server 2000 (one is localhost, one is remote with VPN IP 192.168.5.4).
I can select * from [192.168.5.4].db.dbo.test but I can't exec [192.168.5.4].db..spAdd in localhost.
These select and sp is OK for 1 or 2 week without any problem,but it didn't work one day.
Can some one explain why?
SQL server 2005 express reporting problem.
error message:
This feature "remote access to report data sources and/or the report server database" is not supported in this edition of reporting service
I got this error message when I try to connect to database hosted in another PC running SQL server 2000.
Is it true that SQlL server Express can only use Local Database Engine to host the database?
When I use EXEC in a stored procedure ( after building complex option logic) it produces an returns an error of 'Access denied' on the underlying tables.
All objects are dbo owned and execute permission has been given to all users.
Can ant one help?
Rob
When using a SP for getting a recordset is there any issues with using exec like in: rs.open "exec spWhatever"...
Should I use rs.open "spWhatever" or does it really matter performance wise on the SQL server?
Thanks
I am trying to create a awkward sp, just need to know if i can do this somehow, here i piece of the code...
create procedure IM_SP_TrPreProc /*@TableName Varchar(255),*/ @SystemFileName Varchar(255)
---------------------------------------------
--Param1 = Tablename
--Param2 = Systemfilename
---------------------------------------------
as
declare @TableName Varchar(255);--Just For Testing---DELETE!!
declare @Filename varchar(255); --Store Distinct filename
declare @DSNo Varchar(255);-- Use 'set' to execute Var TableName
declare @SumUnits Varchar(255); --Use 'set' to calculate sum of units
declare @SumValue Varchar(255);
Set @TableName = 'TrDs01' -- Testing Only--DELETE!!
------------------------Set Statements using @TableName Var------------------------------------------
Set @DSNo = 'select distinct DataSupplierNo from ' + @TableName
Set @SumUnits = 'select sum(Units) from ' + @TableName
Set @SumValue = 'Select sum(Value) from ' + @TableName
------------------------------------------------------------------------------------------------------
Insert into TransactionMaster([FileName],DataSupplierNo,ImportFileRecordID,FileLoadDate,
UnitsSum,ValueSum,RecordCount)
Select(@Filename),(exec(DSNo)), ................
Just the Bold and underlined bit "exec(DSNo)"..... is this doable in some way? can i use exec to retrieve the value to insert to data supplier. As far as i know i have to do it like this because im using a variable as the table name...
I need help understanding the syntax of the "exec sql" statement.
i am looking at code that build an sql string such as
sql="exec SOMETHING Session("id")"
or something like that.
then, there is
conn.execute(sql)
My question is the "SOMETHING" in the sql statement...is what? I know it is user defined (object or variable or such), but what exactly is it? i look through the rest of the code and don;'t see SOMETHING defined elsewhere.
i am not sure if i am asking the question right. i don't understand what the SOMETHING is doing, or why it is there.
in particular, the code i am examining is
sql="exec SurveyDelete "&"'" & Session("StudentID") & " ' "
conn.execute(sql)
i understand the this statement will delete a record, but how does it handle "SurveyDelete", how does it know what the is when it is not defined anywhere else in the code?
Hi,
Can I execute my MDX statement as in the exhibit format!
DECLARE @test VARCHAR(MAX)
SET @test = 'WITH test AS (SELECT * FROM merchants)'
EXEC(@test)
SELECT * FROM test
If I don't use that dynamice sql statement, everything work fine.
Thanks,
Myo
Hi,
I have a written a SP to do indexdefrag to all user table indexes in a databases...I had to use dynamic sql so I can reuse this code for any DB...
declare @strsql varchar(500)
set @strsql = ' dbcc indexdefrag('+'''DBName'''+',554556545,3)'
exec (@strsql)
When I execute the above script, I immeaditely see the results in the query analyser like below:
Pages Scanned Pages Moved Pages Removed
------------- ----------- -------------
3 0 0
Looks like the indexdefrag did not happen since the logical fragmentation is still a high number like 30%.....
Just wondering whats goin on..
Thanks.
Ranga
Hi, I have an sql query like this :DECLARE @TableName varchar(200), @ColumnName varchar(200), @EmployeeID varchar(200), @Result varchar(200);SET @TableName = 'Customer';SET @ColumnName = 'First_Name';SET @CustomerID = 28;-- This line return ErrorSET @Result = EXEC ('select' + @ColumnName + ' from ' + @TableName + ' where Recid = ' + @CustomerID + '');Print @Result; I am pretty sure the SELECT statement in EXEC will only return 0 or 1 record. But how to capture result from EXEC? Thanks
View 1 Replies View Relatedis it possible to have a sproc with a input parm of a column name and have this column name be inserted into an exec statement that runs and provides the output as a OUTPUT parm instead of a result set?
i can get the sproc to take the column name as a parm, run the exec, but cannot figure out how to assign the "dynamic sql" output to a OUTPUT variable instead of returning the result set.
How can i get the result from a dynamic sql like - exec('select ' + fieldName
+ ' from ' + TableName)
I found this statement in BOL and it didn't make it to work.Is anybody out there who ha the same problem?
Database is MASTER.
USE master EXEC ("USE pubs") SELECT * FROM authors
Running this dynamic sql construct gives me an error because somehow it does not accept my variable @table or it is recognised differently. If run directly no problem but apparently the single quotes are a problem.
Print @Table (db and table name: opms..transactions)
Select @sql = 'Select * From Payments where not exists (Select * from Hist Where TableName = ' + @Table + ' and sYear = '+ @Year + ' and sMonth = ' + @Month + ')'
Print @sql
EXEC (@sql)
opms..Transactions
Select * From Payments where not exists (Select * from Hist Where TableName = opms..Transactions and sYear = 2003 and sMonth = 12)
Server: Msg 1004, Level 15, State 1, Line 1
Invalid column prefix 'opms.': No table name specified
Any idea?
mipo
I would like to execute something like that with sql6.5 :
select @cmd = 'use ' + quotename(@dbname) + ' exec sp_helprotect'
exec (cmd)
I tried like this but I don't know what's wrong
exec ("USE "+ RTRIM(@dbname) +"exec sp_helprotect")
Thank you
Hi,
I am seeking an expert help for the following issue, please find the code am using first ...the problem mentioned below that...
----------------------------------------------
DECLARE
,@DBName VARCHAR(128)
,@LoginName VARCHAR(128)
,@SQL VARCHAR(2000)
SET @DBName='dbname'
SET @LoginName='loginname'
SELECT @SQL=@DBName+'..SP_EXECUTESQL N''SP_REVOKEDBACCESS ['+@LoginName+']'''
EXEC(@SQL)
IF @@ERROR <> 0
PRINT @@ERROR
ELSE
BEGIN
PRINT 'Revoked database access of [' + @LoginName + '] from the database ['+ @DBName +']
PRINT @@ERROR
END
--------------------------------------------------------------
Suppose I am trying to REVOKE a database access which not exist iw will give me a mesage like ,
Server: Msg 15008, Level 16, State 1, Procedure sp_revokedbaccess, Line 36
User 'Loginname' does not exist in the current database.
But the @@ERROR will return 0 as it was a successfull execution of EXEC(@SQL) .
So How can I retrieve the error value 15008 in a variable ..?
:confused:
Hello,
I'm trying to do something like the following, but it keeps complaining that I need to declare @max, even though I have (and it is of the same type as link_id).
EXEC('SELECT @max=MAX(link_id) FROM '+ @str1)
I've looked into sp_executesql but I'm not entirely sure how that functions. Any suggestions?
How do I attached the file by using xp_sendmail?
exec xp_sendmail
@recipients='myemail@yahoo.com',
@subject='test',
@attach_results='True'
??? 'C:FileName.xls'
I have a stored proc that assigns a value to a field based on user input from an Access front end.
The last part of the stored proc sends an email if certain conditions are met.
It appears that users do not have permission to execute xp_sendmail. I guess this is because it is executed on the master database. Is there a way I can give them permission to this stored proc?
The users are getting this message:
EXECUTE permission denied on bject 'xp_sendmail', 'database master', owner 'dbo'.(#229)
I am creating a dynamic query and using exec to execute it inside of a function. This query will return only one value. How can I get the value the query returns into a variable?
Functions can not call stored procedures, and they can not use temporary tables.
Thanks much
I am trying to do an insert statement utilizing a variable string.
something like:
Set @cString = 'SELECT top 10 *
FROM OPENDATASOURCE(
' + char(39) + 'SQLOLEDB' + char(39) + ',' + char(39) +
'Data Source=' + @lServer + ';User ID=' + @user + ';Password=' + @pword + char(39) + '
).myServer..
Insert into #Temp_table (field1, field2)
select exec @cString
--What is the syntax for this?
OK, I'm fairly new to SQL Server, but I know SQL and databases pretty well. I'm just starting to use the dynamic SQL feature of SQL Server (with EXEC), and am wondering how to return a scalar value from a dynamic SQL expression. I realize I can't use EXEC in a user-defined function, but I want to create a stored procedure with one OUTPUT variable so I can simulate a function. The following code does not work, because EXEC does not return a value:
CREATE PROCEDURE dbo.ExecFunction ( @ScalarSELECTString varchar(250), @@ReturnVal sql_variant )
set @@ReturnVal = ( exec @ScalarSELECTString )
go
So, I was wondering if someone might be able to suggest a way to re-write the above code to achieve the same effect. Thanks in advance.
I need to insert the results into a temp table and i recieve the "MSDTC on server 'servername' is unavailable error".
declare @thestringall varchar(1000)
set @thestringall = 'select statment here'
insert into #temptable exec (@thestringall)
Thanks
Wooanaz
hi guys
maybe an easy one for you
in stored procedure I create follving select
@cmd = 'select ' + @column_name + 'from ticket_dump_datawarehouse '
execute (@cmd)
problem is thant I want to gave return value from this select
something like
set @return = execute(@cmd)
but I recieve error
Incorrect syntax near the keyword 'execute'
Can I do that some other way?
hi guys
maybe an easy one for you
in stored procedure I create follving select
@cmd = 'select ' + @column_name + 'from ticket_dump_datawarehouse '
execute (@cmd)
problem is thant I want to gave return value from this select
something like
set @return = execute(@cmd)
but I recieve error
Incorrect syntax near the keyword 'execute'
Can I do that some other way?
this might sound dumb or impossible, but is there a way to run exec commands forcing them to not return results
View 6 Replies View RelatedI need get the o/p of a system sp into a table. I am doing the following,
insert #repl_monitor
exec [distribution].sys.sp_replmonitorhelpsubscription @publisher =
N'FGRWA0508', @publisher_db = N'DB_Name', @publication = N'publication'
Code is really not important. Any sys SP can replace the above code.
I am getting the following error
Msg 8164, Level 16, State 1, Procedure sp_MSload_tmp_replication_status, Line 80
An INSERT EXEC statement cannot be nested.
I have seen the following link which discuss this issue,
http://www.sommarskog.se/share_data.html
But there is no solution there.
I tried with sp_executesql and EXEC(), but unable to get the result. Can anyone put some light?
------------------------
I think, therefore I am - Rene Descartes
Hi,
How to exec the following function from my select statement and get my return value:-
ALTER FUNCTION [dbo].[fn_qty]
(@qty decimal (10,4),
@price decimal (10,4),
@pieces int,
@mpt int=0)
returns decimal (10,4)
AS
begin
declare @totamt decimal (10,4)
if @pieces = 0
begin
SET @totamt = (@QTY * @price)
end
else
begin
SELECT @mpt = (SELECT case mpq
when 1 then 10
when 2 then 100
else 100
end
FROM ims.parm)
SET @totamt=(((FLOOR(@QTY)*@PRICE))+(((@qty-FLOOR(@QTY))* @mpt)/@pieces)*@price)
end
return @totamt
end
I can exec the function as exec command as follows:-
exec @totamt( erpinv.dbo.fn_qty 3.5,6,24 )
Best Regards