I have created an app that requires a registration, but when I run the app I get the following error from the Registration page. Can someone please help? Thanks in advance.
String was not recognized as a valid DateTime.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.FormatException: String was not recognized as a valid DateTime.
Source Error:
Line 58: cmdCommandIns.Parameters.Add("@zipCode", SqlDbType.Int).Value = txbzipCode.Text
Line 59: cmdCommandIns.Parameters.Add("@email", SqlDbType.VarChar, 80).Value = txbemail.Text
Line 60: cmdCommandIns.ExecuteNonQuery()
Line 61: cnnConnection.Close()
Line 62: Private Sub Page_Load()
lblDateStamp.Text = Date.Now
End Sub
'Create Global SQLConnection, Insert SQLCommand ObjectsDim Ds As DataSet
Dim connString1 As String = ConfigurationSettings.AppSettings("connString1") 'iscorp/eVisitsDim cnnConnection As New System.Data.SqlClient.SqlConnection(connString1)
Dim cmdCommandIns As New System.Data.SqlClient.SqlCommand("Insert INTO personID (firstName,lastName,middleInitial,dateOfBirth,genderCode,subscriberNumber) Values (@firstName,@lastName,@middleInitial,@dateOfBirth,@genderCode,@subscriberNumber)", cnnConnection)Dim cmdCommandIns1 As New System.Data.SqlClient.SqlCommand("Insert INTO registrationID (personID,addressID,email) Values (@personID,@addressID,@email)", cnnConnection)
Dim cmdCommandSelect As New System.Data.SqlClient.SqlDataAdapter("Select person,registration From LakeShore WHERE person=@person AND registration=@registration", cnnConnection)Protected Sub btnReg_OnClick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnReg.Click
'Open a connection to the "iscorp" Database
cnnConnection.Open()
'Insert Content into personID tablecmdCommandIns.Parameters.Add("@firstName", SqlDbType.VarChar, 40).Value = txbfirstName.Text
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
I have a master package, which executes child packages that are located on a SQL Server. The Child packages execute other child packages which are also located on the SQL server.
Everything works fine when I execute in process. But when I set the parameter in the mater package ExecutePackageTask to ExecuteOutOfProcess = True, I get the following error
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "Row Count" (5349).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Custom Split" (6399).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Data Source" (5100).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "DST_SCR Load Data" (6149).
The child packages all run fine when executed directly, and the master package runs fine if Execute Out of Process is False.
Hi, I'm having an SSIS package which gives the following error when executed :
Error: 0xC002F210 at Create Linked Server, Execute SQL Task: Executing the query "exec (?)" failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Task failed: Create Linked Server
The package has a single Execute SQL task with the properties listed below :
General Properties Result Set : None
ConnectionType : OLEDB Connection : Connected to a Local Database (DB1) SQLSourceType : Direct Input SQL Statement : exec(?) IsQueryStorePro : False BypassPrepare : False
Parameter Mapping Properties
variableName Direction DataType ParameterName
User::AddLinkSql Input Varchar 0
'AddLinkSql' is a global variable of package scope of type string with the value Exec sp_AddLinkedServer 'Srv1','','SQLOLEDB.1',@DataSrc='localhost',@catalog ='DB1'
When I try to execute the Query task, it fails with the above error. Also, the above the sql statement cannot be parsed and gives error "The query failed to parse. Syntax or access violation"
I would like to add that the above package was migrated from DTS, where it runs without any error, eventhough it gives the same parse error message.
I would appreciate if anybody can help me out of this issue by suggeting where the problem is.
hello I have a problem with Sql task when sql task tried to assing a value to my variable I have this error ""La valeur n'est pas comprise dans la plage attendue." I'm using ODBC connexion for a csv file
[Execute SQL Task] Error: An error occurred while assigning a value to variable "JDETimezone": "Unable to find column Timezone in the result set.".
i know what the problem is i.e. no row is returned then what is the problem
here you are.... i want to it work... strange... ok i explain...
actully i have some processign to do with variable JDETimezone even no row is returned.... can u tell me the alternative to do the follwing task...
I want to retrieve a record from some table and do some processing and if no row is present or returned then i want to do seperate processing.... can ne one help me out ?
I have small problem with the ADO 2.6 - 2.8 Command object.
I created a Stored procedure preforming some tasks within a tran.
whitin the tran i'm collecting the @@ERROR values and in the end (after tran closing )generating the correct error string - which will be send back to the caller
in the VB6 app, i'm using a command object with the next line:
Set MyRecordset= MyCommand.Execute
In all the cases and option, when i run the SP - the command preform the tasks and return closed recordset (with the currect answer) and i can't read it.
the only solution that worked until now: i need to call MyRecordset.Open which will requery the SP again and generate an error (User defined error).
It happens only when i run command.execute with SP that preforms multitasks and return result recordset.
I'm not sure if this post is in the correct section but here goes.
I have a sp that when executed inserts data into two tables(shown below). The sp works fine when the correct information is inserted into the tables but when you try and insert data that breaks the constraints in the table it obviously errors, but it seems to inert a new row in to the tmptimesheet table(error message shown below). When you open the tmptimesheet table there isn’t the row of a data there but if you run this (SELECT IDENT_CURRENT('tmptimmesheets') after the error it will come back with a id one higher than what’s in the table. Then the next time you run the sp a record will be inserted into the tmptimesheet table and not in to the tmptimsheethours table!? I’m at a total lost at what to do can someone please help!?
Thanks in advance Dave
CREATE TABLE [dbo].[tmptimesheets]( [TimesheetID] [int] IDENTITY(1,1) NOT NULL, [Placementid] [int] NOT NULL, [Periodstarting] [datetime] NOT NULL, [createdon] [datetime] NOT NULL, [createduserid] [int] NOT NULL, [Issued] [nchar](1) COLLATE Latin1_General_CI_AS NOT NULL, [ReadyForBilling] [nchar](1) COLLATE Latin1_General_CI_AS NOT NULL, [Reject] [nchar](1) COLLATE Latin1_General_CI_AS NULL, [Comments] [text] COLLATE Latin1_General_CI_AS NULL, [Rate] [nchar](1) COLLATE Latin1_General_CI_AS NOT NULL, CONSTRAINT [PK_tmptimesheets] PRIMARY KEY CLUSTERED ( [TimesheetID] ASC )WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY], CONSTRAINT [IX_tmptimesheets_1] UNIQUE NONCLUSTERED ( [Placementid] ASC, [Periodstarting] ASC )WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY] ) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
CREATE TABLE [dbo].[tmptimesheethours]( [TmpTimesheethourid] [int] IDENTITY(1,1) NOT NULL, [Timesheetid] [int] NOT NULL, [applicantid] [int] NOT NULL, [Workedon] [datetime] NOT NULL, [Hoursworked] [numeric](10, 2) NOT NULL, [performancevalueid] [int] NOT NULL, [Reject] [ntext] COLLATE Latin1_General_CI_AS NULL, [Breaks] [numeric](10, 2) NOT NULL, CONSTRAINT [PK_tmptimesheethours] PRIMARY KEY CLUSTERED ( [TmpTimesheethourid] ASC )WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY] ) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO USE [Pronet_TS] GO ALTER TABLE [dbo].[tmptimesheethours] WITH NOCHECK ADD CONSTRAINT [FK_TimesheetHours_Timesheets] FOREIGN KEY([Timesheetid]) REFERENCES [dbo].[tmptimesheets] ([TimesheetID]) GO ALTER TABLE [dbo].[tmptimesheethours] CHECK CONSTRAINT [FK_TimesheetHours_Timesheets]
Error Message Msg 2627, Level 14, State 1, Procedure sp_tmptimesheet_insert_day, Line 40 Violation of UNIQUE KEY constraint 'IX_tmptimesheets_1'. Cannot insert duplicate key in object 'dbo.tmptimesheets'. The statement has been terminated. Msg 547, Level 16, State 0, Procedure sp_tmptimesheet_insert_day, Line 65 The INSERT statement conflicted with the FOREIGN KEY constraint "FK_TimesheetHours_Timesheets". The conflict occurred in database "Pronet_TS", table "dbo.tmptimesheets", column 'TimesheetID'. The statement has been terminated. Msg 547, Level 16, State 0, Procedure sp_tmptimesheet_insert_day, Line 86 The INSERT statement conflicted with the FOREIGN KEY constraint "FK_TimesheetHours_Timesheets". The conflict occurred in database "Pronet_TS", table "dbo.tmptimesheets", column 'TimesheetID'. The statement has been terminated. Msg 547, Level 16, State 0, Procedure sp_tmptimesheet_insert_day, Line 108 The INSERT statement conflicted with the FOREIGN KEY constraint "FK_TimesheetHours_Timesheets". The conflict occurred in database "Pronet_TS", table "dbo.tmptimesheets", column 'TimesheetID'. The statement has been terminated. Msg 547, Level 16, State 0, Procedure sp_tmptimesheet_insert_day, Line 130 The INSERT statement conflicted with the FOREIGN KEY constraint "FK_TimesheetHours_Timesheets". The conflict occurred in database "Pronet_TS", table "dbo.tmptimesheets", column 'TimesheetID'. The statement has been terminated. Msg 547, Level 16, State 0, Procedure sp_tmptimesheet_insert_day, Line 153 The INSERT statement conflicted with the FOREIGN KEY constraint "FK_TimesheetHours_Timesheets". The conflict occurred in database "Pronet_TS", table "dbo.tmptimesheets", column 'TimesheetID'. The statement has been terminated. Msg 547, Level 16, State 0, Procedure sp_tmptimesheet_insert_day, Line 178 The INSERT statement conflicted with the FOREIGN KEY constraint "FK_TimesheetHours_Timesheets". The conflict occurred in database "Pronet_TS", table "dbo.tmptimesheets", column 'TimesheetID'. The statement has been terminated. Msg 547, Level 16, State 0, Procedure sp_tmptimesheet_insert_day, Line 200 The INSERT statement conflicted with the FOREIGN KEY constraint "FK_TimesheetHours_Timesheets". The conflict occurred in database "Pronet_TS", table "dbo.tmptimesheets", column 'TimesheetID'. The statement has been terminated. Msg 3902, Level 16, State 1, Procedure sp_tmptimesheet_insert_day, Line 223 The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION.
I have a stored procedure that needs to run with elevated privliges, so I tried setting it to run as one of the db owners. When a regular user tries to execute the SP, I get the error
Cannot execute as the database principal because the principal "joejoe" does not exist, this type of principal cannot be impersonated, or you do not have permission.
What do I need to set up so a user can be impersonated?
I have a For Loop Container which has Execute SQL Task. The following SQL is not working in it.
Input Parameters: Batch_ID, Class_ID both of type long in the parameter mapping dialog.
The result set is of type 'One Row' and direction is input
Result set is: NextBatchID------>User::MinBatch_ID of type int
NextClassID------->User::MinClass_ID of type int
The query is giving very generic error
[Execute SQL Task] Error: Executing the query "" failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Code Snippet
DECLARE @ClassID int DECLARE @BatchID int SET @BatchID = ? SET @ClassID = ? SELECT MAX(T.Batch_ID) AS NextBatch_ID, MAX(T.Class_ID) AS NextClass_ID FROM (Select TOP (10) BD.Batch_ID, BD.Class_ID, ROW_NUMBER() OVER(ORDER BY Batch_ID, Class_ID)AS RowNum From dbo.Batch_Data As BD WHERE (BD.Batch_ID > @BatchID) OR (BD.Batch_ID = @BatchID AND BD.Class > @ClassID) ORDER BY Batch_ID, Class_ID) T WHERE T.RowNum = 10
When I hardcode values the query works. With parameters it fails.
I get the following error when trying to execute an sql statement in oracle and returning the results into an object variable with the execute sql task.
Error: 0xC002F210 at Execute SQL Task, Execute SQL Task: Executing the query "select <columnlist> from <tablename>" failed with the following error: "The SelectCommand property has not been initialized before calling 'Fill'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
It executes fine if I select no results or first row but I can't get full result set to work. The query and connection string are valid. Any ideas?
Could someone please tell me what to do with it and what might be causing it? The packages were fine yesterday.
Here is the error message:
[Script Component 1 1 [3941]] Error: System.Runtime.InteropServices.COMException (0x80040154): Retrieving the COM class factory for component with CLSID {A138CF39-2CAE-42C2-ADB3-022658D79F2F} failed due to the following error: 80040154. at Microsoft.VisualBasic.Vsa.VsaEngine.CreateEngine() at Microsoft.VisualBasic.Vsa.VsaEngine.CheckEngine() at Microsoft.VisualBasic.Vsa.VsaEngine.set_RootMoniker(String value) at Microsoft.SqlServer.VSAHosting.Runtime.CreateVsaEngine() at Microsoft.SqlServer.Dts.Pipeline.ScriptRuntime..ctor(String projectName, String moniker, String language, Boolean showErrorUI) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.CreateUserComponent()
I've got a sql script that I wish to automate. It's really simple and works great in Management Studio. I thought I could simply create an SSIS Integration Services project, place the code in an "Execute SQL Task" object and go, but I'm running into problems. Here's the code:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! use polk_vector go
drop table gisadmin.TMS_Numbers_Not_Found_Tax_Database go
select distinct TMS as 'Not found in Tax Database' into gisadmin.TMS_Numbers_Not_Found_Tax_Database from gisadmin.parcel_polygons where not exists (select * from gisadmin.final_tax_data where gisadmin.parcel_polygons.tms = gisadmin.final_tax_data.akpar#) go !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I created a connection to the SQL database, then inserted the above code into the "Execute SQL Task" object. The query parsed correctly, but when I tried to "build" the query, it gave me the following error: "The USE polk_vector SQL construct or statement is not supported."
So I removed the 1st two lines and tried again. This time, I got this error: "The DROP TABLE SQL construct or statement is not supported."
Can anyone give me some guidance? I assumed I could simply stick the functioning query in and go, but there's obviously more going on than I realize.
Any advise will be much appreciated.
Thanks.
Kent Rothrock Highland Mapping, Inc. kentrothrock@hotmail.com
I am using an execute sql task as the last step in an SSIS package. The task has an insert statement in it that will be appending some transformed data to the end of a large table in our database.
All tasks are executing correctly except for this last one. It is giving me the following error that I cannot puzzle out:
Error: 0xC002F210 at LINPRM_Append, Execute SQL Task: Executing the query
"INSERT INTO LINPRM
SELECT * FROM LINPRM_Append"
failed with the following error: "No disconnected record set is available for the specified SQL statement.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: LINPRM_Append
Does anyone have any ideas on how I might get past this error?
I am getting the following error message while trying to run a Execute SQL task with Variables in BIDS. My connection type is ADO.NET . My Variables defined are
Varout and Varin. Both are String type Variables. @varout has a value set to "Category" and @varin has a value set to "Test Category". I am using the expression
" Select * into " + @[User::VarOut] + " FROM " + @[User::Varin]
The expression eveluates correctly. The error I get when i run the package is:
Package Validation Error. Failed to lock Variable "Select * into TestCategory from category" for read access with error 0XC0010001. The Variable cannot be found. This occurs when an attempt is made to retrieve a variable from the variables collection on a container during the execution of package and the variable is not there. The Variable name may have changed or the Variable is not being created.
Can anyone please tell me what I am doing wrong or where do I need to look at?.
I am trying to execute a Stored Procedure using an Execute SQL Task. my stored proc contains various input paramaters. And the datatype for some of the paramaters are numeric (decimal). So when I am passing values to those paramaters using Exec SQL Task, I have used variables of type Object as it is not working properly even if I declare the variable type as "double". So I have used Object datatype for those variables and it worked properly.
But suddenly from yesterday onwards I am getting an error message (find below).
[Execute SQL Task] Error: Executing the query "USP_InsertData" failed with the following error: "Failed to convert parameter value from a Object to a Double.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
If any one have idea on this, please let me know to rectify this error.
I keep getting an error message when I try to place the result of an execute scalar command into a text box. The msg is:"conversion from 'DBNull' to type 'String' is not valid" The code I am using is:
Dim con as OLEDBConnection con =NewOleDB connection("Provider = MIcrosoft.JetOLEDB.4.0, Data Source = "c:caps.mdb") Dim cmd As OLEDBCommand cmd= NewOLEDBCommand("Select Product from [Inventory Table] Where [Customer ID] = " & grid View1.SelectdValue texBox1.Text = cmd.ExecuteScalar
The code works fine as long as there is a value for the Product. However if the value in the database is NULL I get an error message: :"conversion from 'DBNull' to type 'String' is not valid". How do I wok around this? Chas28
Hello. It is the first time that Im using IMAGE field type..
I created a stored procedure that should return an IMAGE field back to a c-sharp program . (@OutImg IMAGE declared as an output parameter of the procedure.) (Select @OutImg = ImgFld from table) Well,I can compile it , but when execute i get this error : Msg 2739, Level 16, State 1, Line 14 The text, ntext, and image data types are invalid for local variable.
Is there something I can do ,OR should I use any cast/convert func to solve it ..? Many thanks.:o
I have a package A which has execute package task which tryes to execute package B. I am able to execute package B directly but when i execut epackage A.Its able to open package B but its failing at the very first task in B.The error iam getting is like this Error: The task "Setup Connections" cannot run on this edition of Integration Services. It requires a higher level edition.
now it is throwing the below mentioned error: SSIS package "DNB_GMS_PO_Transition.dtsx" starting. Error: 0xC0202009 at DNB_GMS_PO_Transition, Connection manager "CTSINNVLSDNB1SQLEXPRESS.cedprod.cedprod": An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user 'cedprod'.". Error: 0xC00291EC at Taking backup of the affected tables, Execute SQL Task: Failed to acquire connection "CTSINNVLSDNB1SQLEXPRESS.cedprod.cedprod". Connection may not be configured correctly or you may not have the right permissions on this connection. Task failed: Taking backup of the affected tables Warning: 0x80019002 at DNB_GMS_PO_Transition: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. SSIS package "DNB_GMS_PO_Transition.dtsx" finished: Failure.
i was unable to figure it out.but i had connected correctly to Database.
if i run those queries in the Query analyser with the same DB connection its running fine.
I have a package that has its source as an Oracle DB on another server. This package will feed data from that source to a SQL Server 2005 DB. So far, the package works fine if it is executed manually even in SQL Mgmt Studio. It's only failed when I tried it as a scheduled job. I guess I need to do "Package Configurations" which includes the UserID and password for accessing Oracle DB ... but I don't know how. Please help.
Regards,
dnncpt
----------------------------------
Here is the error message:
Date,Source,Severity,Step ID,Server,Job Name,Step Name,Notifications,Message,Duration,Sql Severity,Sql Message ID,Operator Emailed,Operator Net sent,Operator Paged,Retries Attempted 05/08/2007 09:49:00,DataFeed,Error,0,<MyDBServer>,DataFeed,(Job outcome),,The job failed. The Job was invoked by Schedule 8 (Schedule DataFeed Grant Tables). The last step to run was step 1 (DataFeed Grant Tables).,00:00:02,0,0,,,,0 05/08/2007 09:49:00,DataFeed,Error,1,<MyDBServer>,DataFeed,DataFeed Grant Tables,,Executed as user: <MyDBServer>SYSTEM. ....3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 9:49:00 AM Error: 2007-05-08 09:49:00.81 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTSassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2007-05-08 09:49:01.86 Code: 0xC0202009 Source: AWARDS Connection manager "SourceConnectionOLEDB" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "ORA-01005: null password given; logon denied". End Error Error: 2007-05-08 09:49:01.86 Code: 0xC020801C Source: Feed data t... The package execution fa... The step failed.,00:00:02,0,0,,,,0
1. I am trying to load data from AS400 DB2 to SQL Database using integration services.
2. I am using microsoft ole DB for Db2 driver to pull data from AS400 and using native SQL driver to load data into MS SQL 2005.
AS400 View to pull this data is---
SELECT UPPER(CHAR(SVSGVL)) AS AccountID, UPPER(CHAR(SVLDES)) AS AccountDesc, INT(SVSGTP) AS AccountTypeID, INT(SVTR) AS TranslationMethodID, INT(SVDEF) AS AccountValue, INT(SVRM) AS RemeasurementID FROM V820PRMF.GSVL01 WHERE (UPPER(SVSGMN) = 'ACCT') ORDER BY AccountID
AccountID String[DT_STR] Lenhth-16
AccountDesc String[DT_STR] Length -30
All other column is int.
MS SQL 2005 is were data to be loaded. Table Info.
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
Integration Package
[Destination - Account [34]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unspecified error".
[Destination - Account [34]] Error: There was an error with input column "ACCOUNTID" (284) on input "Destination Input" (47). The column status returned was: "The value violated the integrity constraints for the column.".
[Destination - Account [34]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "Destination Input" (47)" failed because error code 0xC020907D occurred, and the error row disposition on "input "Destination Input" (47)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Account" (34) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0xC0209029. There may be error messages posted before this with more information on why the thread has exited.
I am trying to execute a dts from asp.net, but getting an error €œThe specified DTS Package ('Name = 'DTS_USERS_LIST'; ID.VersionID = {[not specified]}.{[not specified]}') does not exist.€? I know I have saved the dts package on the sqlserver, and have run it from the server successfully.
Here is my code:
Package2Class package = new Package2Class(); object pVarPersistStgOfHost = null;
My configuration database is made to work with both SQL Server 2005 and 2000, could this be an error that has to do with that?
Here is the query that I am using...
DECLARE @Server [nchar] (100) SET @Server = (CONVERT(char(100), (SELECT SERVERPROPERTY('Servername'))))
INSERT INTO [tempdb].[dbo].[Server_Roles] (Server, ServerRole, UserName) SELECT @Server, role.name, member.name FROM sys.server_role_members rm inner join sys.server_principals member ON rm.member_principal_id = member.principal_id inner join sys.server_principals role ON rm.role_principal_id = role.principal_id
********Begin Errors*************** " failed with the following error: "Invalid object name 'sys.server_principals'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. Task failed: Execute SQL Task I Error: 0x0 at Execute SQL Task I: Invalid object name 'sys.server_role_members'. Error: 0x0 at Execute SQL Task I: Invalid object name 'sys.server_principals'.
While executing packages in a file from a procedure, I get error:
Error: 2006-10-24 14:58:54.62 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error
I'm converting a package from DTS to IS. My manager does not want to spend the time re-writing it to make use of the Script task so that's why I'm using a DTS 2000 task which contains some ActiveX.
The tasks themselves run fine when I'm in the designer and click the run button, but when part of the entire package it fails. I search on the error message and nothing comes up.
This is the error message: Error: System.Runtime.InteropServices.COMException (0x8004043B): Exception from HRESULT: 0x8004043B at DTS.PackageClass.Execute() at Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.Exec80PackageTask.ExecuteThread()
I've set them to run on the main thread but that doesn't seem to help.
I am having trouble running a package in SQL Agent. The step involves zipping up a number of files using SQL Agent. I know in the error message it states "Access is denied" but I can run the package manually in BIS. Also I have applied a SQL proxy to the step using my own credentials which have rights to the file location, but still no luck.
I get the following error:
Error: 2008-03-10 09:04:02.04 Code: 0xC002F304 Source: Call ZipFiles Batch Execute Process Task Description: An error occurred with the following error message: "Access is denied". End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 09:04:00 Finished: 09:04:02 Elapsed: 1.219 seconds. The package execution failed. The step failed.,00:00:02,0,0,,,,0
I am getting the following error when I try to double click on an Execute Sql Task to open it using VS2005:
=================================== Cannot show the editor for this task. (Microsoft Visual Studio) =================================== Method 'get_ParameterSize' in type 'GridRow' from assembly 'Microsoft.SqlServer.SQLTaskUI, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' does not have an implementation. (Microsoft.SqlServer.SQLTaskUI)
I have a strange problem with calling packages from c# code. Packages start to execute, but never finish. Instead an error occures in eventlog:
(message is translated into english so it can sound a bit different)
Erring application AppName.exe, version 1.0.0.0, timestamp 0x4784c811, erring module ntdll.dll, version 6.0.6000.16386, timestamp 0x4549d372, exception code 0xc0000374, error shift 0x00000000000c87b7, process ID 0x1284, application start time 0x01c852ceb26bbad3.
In debuger, execution stoppes on line "DTSExecResult res = dtsPkg.Execute();", but no error is showed.
This behaviour occured unexpectally. Application worked correctly and in a minute I wasn´t able to execute any package from an application. I also tryed it from another computer and got the same error. Calling packages directly from management studio works fine.
OS: Windows Vista Bussiness 64b
Code:
Package dtsPkg = new Package();
Variables variables = dtsPkg.Variables;
Microsoft.SqlServer.Dts.Runtime.Application dtsApp = new Microsoft.SqlServer.Dts.Runtime.Application();