Execute Package Task Always Fail When ExecuteOutOfProcess = False
May 29, 2006
Why does the Execute Package Task in SSIS always fail when set to execute in-process?
Having ExecuteOutOfProcess = False always results in that the package fails when run from within BI Studio.
I have also tried it from Command Line using dtexec., same results.
The problem with setting ExecuteOutOfProcess = True all the the time and running from within Bi Studio is that an enourmous amount of processes is created, none of which die because SSIS runs in Debug mode, another problem which is there doesn't seem to be a way to run it in Release mode so as not to get so many Dtexec processes, which ultimately results in having the Server die.
By Dying I mean, thrashing of the CPU & Memory. Page file to extreme limits.
And yes, the hardware should be able to take much more than what SSIS is supposed to eat. Dual 3GHz Xeon & 4GB of Ram.
Thank you.
My kind regards,
Eng. Ahmad Alkilani
View 2 Replies
ADVERTISEMENT
Jul 12, 2007
Hi all,
I have an error when a package is trying to execute a SubPackage using the "Execute Package Task". I have this problem for all packages that are running sub packages.
The packages are stored in the DTSPackages folder of the SQL Server installation folder.
The master package is called from an Event Handler on a document library in MOSS 2007.
The account from the Sharepoint Application Pool has Full Control on the DTSPackages folder.
What am I missing ?
View 2 Replies
View Related
Jul 1, 2015
I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
View 3 Replies
View Related
Dec 2, 2005
I have a SQL Task that calls a stored procedure and returns an output parameter. The task fails with error "Value does not fall within the expected range." The Stored Procedure is defined as follows: Create Procedure [dbo].[TestOutputParms] @InParm INT , @OutParm INT OUTPUT as Set @OutParm = @InParm + 5 The task uses an OLEDB connection and has a source type of Direct Input. The SQL Statement is Exec TestOutputParms 7, ? output The parameter mapping is: Variable Name Direction Data Type Parameter Name User::OutParm Output LONG @OutParm
View 7 Replies
View Related
Jun 30, 2006
I have a dts package that is essentially three transformation tasks that creates 3 text files. The transform data is accomplished through an sql query. Before I execute the transform tasks I would like to peform a couple of simple existence checks to verify data: i.e,
if exists (select * from table where week_ending = endoflastweek(getdate())
I could put the statement into the sql (if exists, begin/end) of each of the transformation tasks and prevent the process from executing, but it would be easier to put it into an "execute sql task" and if it succeeds, fail the task or make some kind of declaration not to proceed. I'm not sure how to do this...I know this can be done with an activeX script,
Main = DTSTaskExecResult_Failure
Is there a way to do this in an execute sql task step?
View 1 Replies
View Related
Apr 5, 2007
This task or container has failed, but because FailPackageOnFailure property is FALSE, the package will continue. This warning is posted when the SaveCheckpoints property of the package is set to TRUE and the task or container fails.
I have just spotted the message above in one of my log files.
I've never noticed it before. Is it new in SP1? I'm guessing it must be.
If so - good job. This is a very important addition because the behaviour of checkpoints without setting FailPackageOnFailure=TRUE is not intuitive (in my opinion).
-Jamie
View 3 Replies
View Related
May 9, 2007
I have a SSIS package that has several Execute SQL Components. One of the first components reurns a Full Result Set of IDs based on a stored procedure call. The stored procedure can return multiple rows. I store the results to an ADO recordset (object variable) to be used later. I want the component to fail, and the package if the return of the stored procedure is zero records. What is the best way to do this? I had a raise error statement if @@rowcount was zero but this did not fail the component. Any other suggestions?
View 5 Replies
View Related
Jun 9, 2006
I am new to this, but have scoured the web and not found an answer to my question...
I have an execute process task that runs a simple batch file. When this batch file completes with an ERRORLEVEL greater than 0, I would like the task to fail. I thought this simply meant setting the "FailTaskIfReturnCodeIsNotSuccessValue" property to true, and setting the SuccessValue to 0. However, this does not appear to work.
Even with a simple batch file forcing the errorcode to 1 as follows, the task still completes "successfully".
SET ERRORLEVEL = 1
Any ideas? Thanks!
View 8 Replies
View Related
Jun 2, 2006
In a DTS package, I have various SQL tasks which are linked by workflows, either 'on success' or 'on failure'.
What is the sql statement for making a sql task fail so that it follows the 'on failure' workflow?
Thanks
View 4 Replies
View Related
Jan 17, 2006
I'd like to use a SQL Task to execute a stored proc, which checks for a value, and if I don't like the result, raise an error. If the stored proc fails I'd like the package to fail as well.
When I run the stored proc outside of the package, it fails as it should. However, when I run it in the package, the package does not fail. It moves on to the next task and completes normally.
Any ideas on what I may be doing wrong?
Thank you,
Perry
View 3 Replies
View Related
Apr 19, 2007
I'm looking for a way to refer to a package variable within any
Transact-SQL code included in either an Execute SQL or Execute T-SQL
task. If this can be done, I need to know the technique to use -
whether it's something similar to a parameter placeholder question
mark or something else.
FYI - I've been able to successfully execute Transact-SQL statements
within the Execute SQL task, so I don't think the Execute T-SQL task
is even necessary for this purpose.
View 5 Replies
View Related
Mar 23, 2008
i have a package that contains a foreach loop container, in this container i have sql tasks, and execute package tasks, that end with a send mail task. if there something wrong with the smtp server, or it's down, the send mail task fails the package.
i don't want this to happen, what i want that if the send mail taks fails, the package will continue it's execution.
--i thought of using the event handler... but i don't know if it works...
thank you for any help!!!
View 5 Replies
View Related
Mar 1, 2007
Hi all,
I have a Send Mail Task in my control flow to notify users that the processing is done. I want to avoid the package to fall in error if the Send Mail task failed.
What is the best practice to do that ?
Should I raise the MaximumErrorCount of theSend Mail Task ? Should I play with ErrorHandler ?
View 1 Replies
View Related
Sep 21, 2006
Hi everyone,
For first time I'm testing this task and surprisingly, when I try "Edit Package" option:
1)The DTS host failed to load or save the package properly
2)The selected package cannot be opened
3)Error HRESULT E_FAIL has been returned from a call to a COM component
But after these messages you can see all the tasks but they haven't name!!
It seem as if RCW mechanism has failed between managed and unmanaged coded-partially.
I don't dare to follow doing more stuff, I don't know if that package is well-loaded or not from there. ?¿
Any guidance or idea about this?
View 5 Replies
View Related
Jul 19, 2007
Hi friends,
I have a for each loop that populates from a set of flat files into a Sql Server table, I run the Flat file Import via a dts package embedded into Execute DTS 2000 Task. I want to pass the Sourcefile Name that is fetched by the For Each Loop to assign it Global Variable in DTS. how this can be made ?
Thanks
Subhash Subramanyam
View 4 Replies
View Related
Feb 21, 2006
I have a master package that contains an Execute Package Task whose ExecuteOutOfProcess flag is True, and that calls a child package whose TransactionOption = Required. The job is running in Sql Agent, and the step that calls the master package is configured to run under a certain domain account that is not in the local Administrators group. With this, I get the following:
messageText: Error 0x80070005 while loading package file "C:program filesmicrosoft sql server90dtsPackagesETLFact_Various_TransactionalChannels.dtsx". Access is denied.
When I add the domain account to the local Administrators group, this error does not occur. From a blog entry, I read that when a child package is executed out of process, the resultant OS process is called dtshost.exe (http://blogs.conchango.com/jamiethomson/comments/1414.aspx). Do I simply need to give my domain account permission to spawn this process? If so, what permission is it? Is there a group that contains this permission?
View 2 Replies
View Related
Jun 8, 2007
I am having problems executing a child package from a parent package using the Execute Package Task. I am attempting to run the master package through a SQL Server Agent job.
The SQL Server Agent job is owned by sa. The step that runs the parent package is configured to load the package from the SSIS Package Store on the same server that the job is running.
I have the Execute Package Task configured as follows:
Location: SQL Server
ExecuteOutOfProcess: True
Connecting as a SQL Server login (let's say TestEtl)
I have added the db_dtsoperator database role to both the TestEtl login and the login that SQL Server Agent connects through. I have also configured the child package's reader role to include db_dtsoperator. Per http://msdn2.microsoft.com/en-US/library/ms141053.aspx, this should allow these logins to run the child package.
I have enabled logging of all events in both the parent and child packages. I see the following in the logs when the Execute Package Task executes (omitted portions unrelated to the execution of the child package task):
450939 OnPreExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450940 OnPreValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450941 OnPostValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450942 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDataInitialize::GetDataSource'.450943 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDataInitialize::GetDataSource succeeded'. The external request has completed.450944 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBInitialize::Initialize'.450945 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBInitialize::Initialize succeeded'. The external request has completed.450946 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBCreateSession::CreateSession'.450947 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBCreateSession::CreateSession succeeded'. The external request has completed.450948 OnError ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450949 OnError ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450950 OnTaskFailed ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450951 OnPostExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450952 OnWarning ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. 450953 OnPostExecute ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450954 PackageEnd ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 End of package execution.
I am sure that what I am doing is quite common, and I obviously have something misconfigured somewhere - but I'm not sure what my misconfiguration is. Can anyone enlighten me?
View 6 Replies
View Related
Aug 25, 2006
I use a execute package task to run a child package in which I run some sql task.
as the error handle I insert a script task and link a line from execute package task to script task
of course the line is red,
but I found when the child package failed, the execute package task turns red,it stopped
the script task can't be run, I don't konw why?
View 9 Replies
View Related
Jan 19, 2008
Hi,
I am calling one SSIS package from another using the Execute Package Task.
I also need to pass a parameter to the called SSIS package.
Can I do this? If yes, how? If no, then what will be the work-around for this?
Thanks in advance.
View 16 Replies
View Related
Mar 16, 2007
I am using many Execute Package Tasks in a DTS packages to call a number of other DTS packages. The problem is that when I change one of the called DTS packages the execute package task does not run the updated packages. It looks like the execute package task references a Package ID guid instead of the name. Is there a way to make it so a change to a called DTS package will reflect in all references to it
View 2 Replies
View Related
Jul 21, 2007
I am missing something simple that's killing me.
I am trying to execute a child ssis package using the execute package task. I add execute package task to the parent package and in the package task editor, under the package options I choose: filesystem for location, I choose new connection and create a connection to the package on the filesystem I want to execute, packagenamereadonly is blank. I execute the parent package and get an error that I did not specify the name of the package in the execute package task object. Now, since I can't populate the package name, as that option is readonly, I am not sure how to remove my headache. Anyone see what I'm doing wrong? None of these packages have security.
-Aaron
View 1 Replies
View Related
Feb 13, 2008
Hi All,
I have a master package that has 3 child packages,so iam taking the child packages from the D drive of my QA machine.
I have used environmental variables to define the path in packages configurations,so that same environmental variables can be used to point to production server path.
The package is able to run on production server but it still fetching data from QA server.
Is the any other way to do it better.
How to use the subpackages in production server.
Please help.
Thanks,
SVGP
View 5 Replies
View Related
Apr 21, 2006
I have five DTS packages on a server.
Instead of executing these DTS packages individually, I have decided to create a 'parent' DTS package that will fire off each of the five 'child' DTS packages using 'On Success' precedences.
This seemed like a pretty straight forward task, but when one of the child DTS packages fails, the 'parent' DTS package continues to execute the next 'child' DTS package through the 'On Success' precedence. I was expecting the 'parent' DTS to fire off an 'on failure' precendence and stop executing
Can anyone tell me why the 'parent' DTS package continues with the 'on success' precedence after one of the 'child' DTS packages has failed.
Thanks in advance.
View 2 Replies
View Related
Mar 25, 2008
I have a package A which has execute package task which tryes to execute package B.
I am able to execute package B directly but when i execut epackage A.Its able to open package B but its failing at the very first task in B.The error iam getting is like this
Error: The task "Setup Connections" cannot run on this edition of Integration Services. It requires a higher level edition.
Has any one come accross this before...Help
Thanks
View 1 Replies
View Related
Feb 19, 2008
Hi,
I have a Load package which calls 3 other subpackages within it through the execute package task.
When i run the package thru batchfile it runs fine.
But when we run thru Autosys job scheduler i get the following error for the subpackages.
Code: 0xC00220DE
Source: Execute Package Task1
Description: Error 0x80070003 while loading package file "". The system cannot find the path specified.
i have given the path in the config file,which has the server name and the path of the subpackages.
Has anyone come across this situation before.
Pls help!
Thanks,
SVGP.
View 4 Replies
View Related
Feb 9, 2006
I'm trying to run a package from another package using Execute package task -
I'm getting the error:
Error: Error 0xC0012050 while preparing to load the package. Package failed validation from the ExecutePackage task. The package cannot run. .
I have Delay validation on the child package. Any other suggestions?
Thanks
View 13 Replies
View Related
Jan 20, 2006
I€™m using a For Loop container to with an Execute Package Task inside, looping until a folder is empty. I€™ve noticed some strange behaviors:
1. The child package keeps creating new connections. I start with 3 connections to the DB and when the For Loop container is done I€™ve got 364 connections.
2. The Execute Package Task is pulling the wrong version of the package I€™ve specified. I€™m using a package saved to the File System and there€™s only one copy on the drive. I€™ve verified the path is going to the correct location.
Does anyone have a work-around for the €˜connection generation€™ issue?
TIA
Eric
View 1 Replies
View Related
Jan 27, 2008
I have added a package from SQL Server to another package as an "Execute Package Task" it fails with this error:
Error: Error 0xC0014062 while preparing to load the package. The LoadFromSQLServer method has encountered OLE DB error code 0x80040E14 (Only the owner of DTS Package 'nVision_AgentPump' or a member of the sysadmin role may create new versions of it.). The SQL statement that was issued has failed. .
I tried setting the Protection Level to "don't save sensitive", and running the package in process and out. Any idea where to look?
Thanks,
Kayda
View 6 Replies
View Related
Sep 26, 2006
I have a package (i.e. child package) which runs itself perfectly fine without displaying any error.
However when I embeded this package inside another package (i.e. parent package) using Execute Package Task. The task always fails. It seems strange enough.
The child package has two variables that need to be passed in from parent package.
Can any expert here please help out? Thanks.
- Steve
View 10 Replies
View Related
Mar 3, 2008
Hi All,
I have strange problem. I have a package task that is setup to run a package from a file source. The package ran fine originally but VS placed a shared drive letter for the path. I went back to change it to a UNC path and now the package fails and gives an error saying the connection is not valid and that it failed validation. Going back into the connection manager to check the path and it looks good, even pressing the Browse button shows the correct directory.
What am I doing wrong?
View 5 Replies
View Related
Nov 7, 2007
Hi,
Is there anyway where i can pass the package name to an "execute package task" and run it through loop. My loop task will pass the package name which is assigned on a variable and the execute package task should pickup the name and run, is this possible, if yes how?
View 3 Replies
View Related
Jun 8, 2007
Hi,
We have used an execute package task in our master package to execute a child package and we have set the execute out of process=false. This master package is running fine in 32 bit server but is failing in 64 bit server. is there any settings to be done in the server or is it the problem with the property setting(execute out of process)
Vivek S
View 1 Replies
View Related
Oct 21, 2002
Currently, I'm developing an ETL program using Microsoft DTS on SQL Server 2000.
I've completed unit testing & component testing for all inner packages containing various types of executions - SQL task, ActiveX Script task, Error Handler, Transform Data task, Data Driven Query & Dynamic Properties task.
When unit & component tested, all inner package properties-"Limit the maximum number of tasks executed in parallel" is defaulted to 4.
However, the integration testing is failing because I've yet to successfully execute any of the Package tasks in the outer package, which runs & controls all inner packages from the outer package.
The error message encountered was:
---------------------------------------------------------------
| Error source: microsoft dts |
| Error description: execution was cancelled by another user. |
---------------------------------------------------------------
Please explain what might be the cause to this problem when I'm executing the outer package?
View 1 Replies
View Related
