Hi,
Is there anyway where i can pass the package name to an "execute package task" and run it through loop. My loop task will pass the package name which is assigned on a variable and the execute package task should pickup the name and run, is this possible, if yes how?
I'm looking for a way to refer to a package variable within any
Transact-SQL code included in either an Execute SQL or Execute T-SQL
task. If this can be done, I need to know the technique to use -
whether it's something similar to a parameter placeholder question
mark or something else.
FYI - I've been able to successfully execute Transact-SQL statements
within the Execute SQL task, so I don't think the Execute T-SQL task
is even necessary for this purpose.
Hi everyone,
For first time I'm testing this task and surprisingly, when I try "Edit Package" option:
1)The DTS host failed to load or save the package properly
2)The selected package cannot be opened
3)Error HRESULT E_FAIL has been returned from a call to a COM component
But after these messages you can see all the tasks but they haven't name!!
It seem as if RCW mechanism has failed between managed and unmanaged coded-partially.
I don't dare to follow doing more stuff, I don't know if that package is well-loaded or not from there. ?¿
Any guidance or idea about this?
Hi friends,
I have a for each loop that populates from a set of flat files into a Sql Server table, I run the Flat file Import via a dts package embedded into Execute DTS 2000 Task. I want to pass the Sourcefile Name that is fetched by the For Each Loop to assign it Global Variable in DTS. how this can be made ?
Thanks
Subhash Subramanyam
I am having problems executing a child package from a parent package using the Execute Package Task. I am attempting to run the master package through a SQL Server Agent job.
The SQL Server Agent job is owned by sa. The step that runs the parent package is configured to load the package from the SSIS Package Store on the same server that the job is running.
I have the Execute Package Task configured as follows:
Location: SQL Server
ExecuteOutOfProcess: True
Connecting as a SQL Server login (let's say TestEtl)
I have added the db_dtsoperator database role to both the TestEtl login and the login that SQL Server Agent connects through. I have also configured the child package's reader role to include db_dtsoperator. Per http://msdn2.microsoft.com/en-US/library/ms141053.aspx, this should allow these logins to run the child package.
I have enabled logging of all events in both the parent and child packages. I see the following in the logs when the Execute Package Task executes (omitted portions unrelated to the execution of the child package task):
450939 OnPreExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450940 OnPreValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450941 OnPostValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450942 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDataInitialize::GetDataSource'.450943 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDataInitialize::GetDataSource succeeded'. The external request has completed.450944 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBInitialize::Initialize'.450945 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBInitialize::Initialize succeeded'. The external request has completed.450946 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBCreateSession::CreateSession'.450947 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBCreateSession::CreateSession succeeded'. The external request has completed.450948 OnError ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450949 OnError ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450950 OnTaskFailed ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450951 OnPostExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450952 OnWarning ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. 450953 OnPostExecute ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450954 PackageEnd ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 End of package execution.
I am sure that what I am doing is quite common, and I obviously have something misconfigured somewhere - but I'm not sure what my misconfiguration is. Can anyone enlighten me?
I use a execute package task to run a child package in which I run some sql task.
as the error handle I insert a script task and link a line from execute package task to script task
of course the line is red,
but I found when the child package failed, the execute package task turns red,it stopped
the script task can't be run, I don't konw why?
Hi,
I am calling one SSIS package from another using the Execute Package Task.
I also need to pass a parameter to the called SSIS package.
Can I do this? If yes, how? If no, then what will be the work-around for this?
Thanks in advance.
Hi All,
I have the following issue, i want to make dynamic the Argument property of the Execute Process Task but i couldn't able to do so, i have posted several times , hopefully i will get a solution today. I am using the following Argument to execute (winzip) program.
Argument: /e C:FTPFile1.zip C:FTPUnzipped
This Argument works but since File1.zip gets change every time, i mean it will be File2.zip, thus i have to change it manually on the Execute Process Task every time, however i want it to change by itself.
To make it clear, the /e mean winzip usage for extract file, the C:FTPFile1.zip is where the zipped file is, and the C:FTPUnzipped is where i dumped the unzipped files. as you see the file name will change every time like File1.zip, File2.zip, File3.zip, etc... Thus i want to make it daynamic, for example if i execute today File1.zip, then i have to execute tomorrow File2.zip automatically, and then File3.zip etc, that means the source file is changing every time, how do i make it then to be Dynamic.
Please help, i need your input badly.
Thank you in advance,
I am using many Execute Package Tasks in a DTS packages to call a number of other DTS packages. The problem is that when I change one of the called DTS packages the execute package task does not run the updated packages. It looks like the execute package task references a Package ID guid instead of the name. Is there a way to make it so a change to a called DTS package will reflect in all references to it
View 2 Replies View RelatedI am missing something simple that's killing me.
I am trying to execute a child ssis package using the execute package task. I add execute package task to the parent package and in the package task editor, under the package options I choose: filesystem for location, I choose new connection and create a connection to the package on the filesystem I want to execute, packagenamereadonly is blank. I execute the parent package and get an error that I did not specify the name of the package in the execute package task object. Now, since I can't populate the package name, as that option is readonly, I am not sure how to remove my headache. Anyone see what I'm doing wrong? None of these packages have security.
-Aaron
Hi All,
I have a master package that has 3 child packages,so iam taking the child packages from the D drive of my QA machine.
I have used environmental variables to define the path in packages configurations,so that same environmental variables can be used to point to production server path.
The package is able to run on production server but it still fetching data from QA server.
Is the any other way to do it better.
How to use the subpackages in production server.
Please help.
Thanks,
SVGP
I have five DTS packages on a server.
Instead of executing these DTS packages individually, I have decided to create a 'parent' DTS package that will fire off each of the five 'child' DTS packages using 'On Success' precedences.
This seemed like a pretty straight forward task, but when one of the child DTS packages fails, the 'parent' DTS package continues to execute the next 'child' DTS package through the 'On Success' precedence. I was expecting the 'parent' DTS to fire off an 'on failure' precendence and stop executing
Can anyone tell me why the 'parent' DTS package continues with the 'on success' precedence after one of the 'child' DTS packages has failed.
Thanks in advance.
I have a package A which has execute package task which tryes to execute package B.
I am able to execute package B directly but when i execut epackage A.Its able to open package B but its failing at the very first task in B.The error iam getting is like this
Error: The task "Setup Connections" cannot run on this edition of Integration Services. It requires a higher level edition.
Has any one come accross this before...Help
Thanks
Hi,
I have a Load package which calls 3 other subpackages within it through the execute package task.
When i run the package thru batchfile it runs fine.
But when we run thru Autosys job scheduler i get the following error for the subpackages.
Code: 0xC00220DE
Source: Execute Package Task1
Description: Error 0x80070003 while loading package file "". The system cannot find the path specified.
i have given the path in the config file,which has the server name and the path of the subpackages.
Has anyone come across this situation before.
Pls help!
Thanks,
SVGP.
I'm trying to run a package from another package using Execute package task -
I'm getting the error:
Error: Error 0xC0012050 while preparing to load the package. Package failed validation from the ExecutePackage task. The package cannot run. .
I have Delay validation on the child package. Any other suggestions?
Thanks
I€™m using a For Loop container to with an Execute Package Task inside, looping until a folder is empty. I€™ve noticed some strange behaviors:
1. The child package keeps creating new connections. I start with 3 connections to the DB and when the For Loop container is done I€™ve got 364 connections.
2. The Execute Package Task is pulling the wrong version of the package I€™ve specified. I€™m using a package saved to the File System and there€™s only one copy on the drive. I€™ve verified the path is going to the correct location.
Does anyone have a work-around for the €˜connection generation€™ issue?
TIA
Eric
I have added a package from SQL Server to another package as an "Execute Package Task" it fails with this error:
Error: Error 0xC0014062 while preparing to load the package. The LoadFromSQLServer method has encountered OLE DB error code 0x80040E14 (Only the owner of DTS Package 'nVision_AgentPump' or a member of the sysadmin role may create new versions of it.). The SQL statement that was issued has failed. .
I tried setting the Protection Level to "don't save sensitive", and running the package in process and out. Any idea where to look?
Thanks,
Kayda
I have a package (i.e. child package) which runs itself perfectly fine without displaying any error.
However when I embeded this package inside another package (i.e. parent package) using Execute Package Task. The task always fails. It seems strange enough.
The child package has two variables that need to be passed in from parent package.
Can any expert here please help out? Thanks.
- Steve
Hi All,
I have strange problem. I have a package task that is setup to run a package from a file source. The package ran fine originally but VS placed a shared drive letter for the path. I went back to change it to a UNC path and now the package fails and gives an error saying the connection is not valid and that it failed validation. Going back into the connection manager to check the path and it looks good, even pressing the Browse button shows the correct directory.
What am I doing wrong?
Hi,
We have used an execute package task in our master package to execute a child package and we have set the execute out of process=false. This master package is running fine in 32 bit server but is failing in 64 bit server. is there any settings to be done in the server or is it the problem with the property setting(execute out of process)
Vivek S
Currently, I'm developing an ETL program using Microsoft DTS on SQL Server 2000.
I've completed unit testing & component testing for all inner packages containing various types of executions - SQL task, ActiveX Script task, Error Handler, Transform Data task, Data Driven Query & Dynamic Properties task.
When unit & component tested, all inner package properties-"Limit the maximum number of tasks executed in parallel" is defaulted to 4.
However, the integration testing is failing because I've yet to successfully execute any of the Package tasks in the outer package, which runs & controls all inner packages from the outer package.
The error message encountered was:
---------------------------------------------------------------
| Error source: microsoft dts |
| Error description: execution was cancelled by another user. |
---------------------------------------------------------------
Please explain what might be the cause to this problem when I'm executing the outer package?
Hello,
I have several DTS packages that take data from SQL Server and exports them onto an Access DB located on the network. Basically, one Execute Process Task from within my DTS package takes the Access DB and zips it while another such task copies the zipped DB and pastes it onto another location on the network. All this works fine.
This export process happens once a month so each month I have to manually add a datestamp to the end of the Access DB file that’s being exported to distinguish it from prior month's export. For example, this month's export file would have AccessDB_20040727.mdb name and the next month it would be AccessDB_20040820.mdb (date is determined based on the date the output is exported on). AccessDB.mdb is the default name of the export DB and datestamp is added at the end of the file name depending on what date the export was run. As I said, I can do this manually each month and it works fine.
I want to, however, know if there is a way to automatically supply the datestamp to the Execute Process Task's Parameters' text box? Following is what I have right now in the Parameters box:
\ghf1-ndc8-sqll$productionoutputlob200406LOB_CF_forDril ldown_All_20040727.zip \ghf1-ndc8-sqll$productionoutputlob200406LOB_CF_forDril ldown_All.mdb
I want to take above text from the parameters box and replace it with something like:
\ghf1-ndc8-sqll$productionoutputlob200406FileName_RunDa te.zip \ghf1-ndc8-sqll$productionoutputlob200406LOB_CF_forDril ldown_All.mdb
Where FileName_RunDate is a variable/placeholder for the name of the output with the datestamp the output is exported on.
There are three different Execute Process Tasks that are happening within each of my DTS packages so it's a time consuming job to have to manually add a datestamp to each package every month when data is exported.
Does anyone know if what I am asking is doable? If I can use a variable in the parameters box of each Execute Process Task’s properties and supply current datestamp values to it prior to executing the package each month? If so then what are the ways? How would I do that?
Thanks much.
JN
This is a bug that I submitted to Microsoft. I wanted to see if anyone could assist me with a work-around.
1. Create a new DTS Package
2. Add an ActiveX Task and change 'Main = DTSTaskExecResult_Success' to 'Main = DTSTaskExecResult_Failure'.
3. Running this package will result in a Failed package.
4. Save Package as 'Failure' to local server
5. Create another new DTS Package.
6. Add an 'Execute Package' task, and configure the properties to have it launch the saved 'Failure' child package.
7. Add an ActiveX task and then click ok to close it.
8. Select the Execute Package task (which executes the failure package), hold control and click the ActiveX task. Add an 'On Success' Precendence constraint from the 'Workflow' menu.
9. Now execute the package. Notice that the ActiveX task will execute even though the Execute Package task FAILED.
10. If you change the Precendence constraint from 'On Success' to 'On Failure' the ActiveX task will not run, because the package thinks that the Execute Package task completed with success.
In summary... if a child package, executed by an Execute Package task fails, the Execute Package Task ALWAYS "reports" success to the following precedence constraint and the package continues to run. Even if 'Fail Package on first error' is enabled. Although you will see that the task actually failed while watching the status of the package execution.
I am currently trying to write vbscript in an ActiveX task that will follow an Execute Package Task. I am trying to make the vbscript check and see if the previous task really did succeed or fail, and then make the ActiveX task succeed or fail as required to make the precedence constraints work properly.
I have replicated this problem on many different machines.
---------------------------------------------------------------------------
Any ideas for my ActiveX task? I am trying to access the StepExecutionResult from the Execute Package task, and I have been unable to. If I can get the Step Execution reult, then I can in turn cause the ActiveX task to suceed or fail, based on the execution result of the Execute Package task.
Thank you for your time,
David Zebrowitz
dzebrowitz@apartners.com
Please help me with this error, I am desperate.
SSIS package "Clear.dtsx" starting.Error: 0xC0202009 at Clear, Connection manager "10.11.60.30.msdb.sa": An OLE DB error has occurred. Error code: 0x80040E4D.An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user 'sa'.".Error: 0xC00220E4 at Execute Package Task: Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!..Task failed: Execute Package TaskWarning: 0x80019002 at Clear: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.SSIS package "Clear.dtsx" finished: Failure.
Okay, can someone explain why when I execute children packages within a loop that only a couple of them work?
When I first started this I had Child Package 1 and Child Packge 2 working from the Parent Package 1. It would loop through twice (I had 2 organizations in my outer loop) and pass in the Parent Package variables correctly.
I am using a simple "Foreach Item Enumerator" with a collection of string enumerators that are the Names of the children packages - these are assigned to a variable that is scoped to the outer loop.
Now, when I add a new Child Package 3 and set it up the same as the other 2, when it goes to execute Child Package 3 it fails with the error:
"Error: The connection manager "[My Package Name].dtsx" is not found. A component failed to find the connection manager in the Connections collection. "
What in the world have I done? I was under the assumption that since the first 2 packages worked, that any other packages I added would work the same.
Hi,
We have used an execute package task in our master package to execute a child package and we have set the execute out of process=false. This master package is running fine in 32 bit server but is failing in 64 bit server. is there any settings to be done in the server or is it the problem with the property setting(execute out of process)
Vivek S
Hi all
For selecting different load targets we use package configurations to override the connection parameters in the connection manager.
To organize the different tasks we splittetd our load processes into multiple package files (dtsx) which are then put together into a workflow using "Execute Package Task" component.
With the option /CONFIGFILE its possible to override the configuration file for the package that is called with DTExec. Unfortuanetly it does not override the configuration of subpackages calles by the "Execute Package Task".
Are there some ways to configure subpackages on the command line?
Thomy
Have written a SSIS package which in turn runs a couple of child packages via the Execute Package control flow task. All is fine if I use a Location of File System for the task. However when I deploy to production I'd like the main package and it's child packages to be under SQL Server.
I can set the Execute Package task location to SQL Server after copying my packages into a development SQL box and again it works. However as it's now executing the package from SQL rather than wihin BIDS it doesn't give me the debugging/flow information for the Child package when I run the parent package. It's also a bit of a pain because even though all the packages are part of the same solution if I make a change to a child package I've got to remember to re-save a copy of it to the SQL database.
Have looked into seeing if I can make the location field for the Execute package task configurable so that I could run as a File System package within BIDS but as a SQL package in production but the Location field doesn't seem to be exposed as a property for the Execute Package task so can't set this as an expression or from a configuration.
Does anyone have any advice on using the Executing package task for child packages which are stored in SQL.
Hi,
I need to run an SQL command, in which one of the fields is based on the current time, represented as a string in a specific format.
I used a script task to create the string from the current time, and store it in a package variable named "newDate". Later, in the execute sql task, I have the following update statement: "update table_1 set field_1 = ?" (OLE DB connection is used)
and in the parameters mapping I set parameter 0 to the string package variable "newDate".
The problem is that on runtime, the sql executes with the default value of the variable - i.e. it doesn't take the new value.
I checked it and placed another script task after the first one, that simply tries to read the variable "newDate" and print it to screen, but even here the default value is used.
how can I use the new value of the variable?
thanks.
I have imported a series of SQL 2000 DTS packages to our 64bit AMD SQL 2005 server. I then created SSIS pkgs to run each SQL 2000 package using the Execute DTS 2000 package task. Then I deployed these packages to the Yukon server as well.
I can run these packages when launching them via Integration Services from Management Studio on my workstation, but when I try to run them via a SQL Job or the DTExec command on the server, I get this error. Anyone know of a workaround?
OnError,xxxxxx,xxxxxxx,Execute DTS 2000 Package Task,{94769783-575C-4D1E-90F6-C2BDB3EA3CE2},{E05551C1-CDDE-40E3-87B4-C65D4E1B3A53},4/26/2006 3:01:37 PM,4/26/2006 3:01:37 PM,0,0x,This task does not support native Win64 environment. Please run the package in 32-bit WOW environment instead.
OnError,xxxxxx,xxxxxxx,Execute DTS 2000 Package Task,{94769783-575C-4D1E-90F6-C2BDB3EA3CE2},{E05551C1-CDDE-40E3-87B4-C65D4E1B3A53},4/26/2006 3:01:37 PM,4/26/2006 3:01:37 PM,-1073594105,0x,There were errors during task validation.
Is the DTS 2000 Package Task not supported on Win64?
I have installed the SQL Server 2000 DTS components from the November feature pack on both my workstation and the server.
Thanks for your help!
Hi,
I am having trouble getting the Execute SQL Task to recognize the package-level variables in an SSIS package. The tasks fail execution. The package contains three Execute SQL tasks and none of them receive the variables. However, when I replace the '?' in the code with the variable values they execute fine. These are the steps I have taken thus far:
Made sure the three variables are package level.
Verified I'm using an OLE DB valid connection.
Verified the variables are properly mapped in the parameters mapping section of the task properties.
Tried all 4 types of variable to parameter mapping (even though '?' in the query and '0,1,2..' in the name should work).
Changed the Bypassprepare property to 'True'.
Breakpoints and watch windows to verify the variable values.
I actually tried the simple tutorials on a one-liner SQL statement that uses variables, but had the same problem. I know there must be something simple that I'm missing here, but any info would be greatly appreciated!
Thanks!
I am making some changes to a tracking SP that I'm using in about 100 SSIS packages. I don't want to go into each package and add the additional parameter (A "?") and map a variable to some ordinal position. I'd like to do this programmatically.
I have some expirence in validing variables and manipulating connection objects in packages though a utility that I wrote. However, I cannot find any guidance on How to create/edit Execute SQL Tasks via code in the package. I would like to do something like this..
Code Snippet
private Microsoft.SqlServer.Dts.Runtime.Application app = new Microsoft.SqlServer.Dts.Runtime.Application();
Package p = app.LoadPackage(DTSPackage, null);
p.Executables["My Execute SQL Task"]
However, the Executables returns an Executable object that is a DtsObject. Do I have to add a reference to the task and cast this executable to that type? Any help is appreciated.
Thanks
Scott
I have a main package that calls several other packages using Execute Package Tasks. I also have OnPreExecute, OnPostExecute, and OnError event handlers at the package level to audit the beginning and completion of each package. I want to prevent each task from bubbling up to the package event handlers as well as prevent each task from bubbling up to the main package event handlers. I've tried setting the Propagate variable for each of the event handlers to False and setting the DisableEventHandlers property of each task to True but neither solution seems to work. Is there a way to do this that I'm missing?
View 8 Replies View Related