Execute Process Task Error - The Process Exit Code Was 1 While The Expected Was 0.
Jan 30, 2007
How do I use the execute process task? I am trying to unzip the file using the freeware PZUnzip.exe and I tried to place the entire command in a batch file and specified the working directory as the location of the batch file, but the task fails with the error:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC0029151 at Unzip download file, Execute Process Task: In Executing "C:ETLPOSDataIngramWeeklyUnzip.bat" "" at "C:ETLPOSDataIngramWeekly", The process exit code was "1" while the expected was "0".
Then I tried to specify the exe directly in the Executable property and the agruments as the location of the zip file and the directory to unzip the files in, but this time it fails with the following message:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC002F304 at Unzip download file, Execute Process Task: An error occurred with the following error message: "%1 is not a valid Win32 application".
The command in the batch file when run from the command line works perfectly and unzips the file, so there is absolutely no problem with the command, I believe it is just the set up of the variables on the execute process task editor under Process. Any input on resolving this will be much appreciated.
Dear list Im designing a package that uses Microsofts preplog.exe to prepare web log files to be imported into SQL Server
What Im trying to do is convert this cmd that works into an execute process task D:SSIS ProcessPrepweblogProcessLoad>preplog ex.log > out.log the above dos cmd works 100%
However when I use the Execute Process Task I get this error [Execute Process Task] Error: In Executing "D:SSIS ProcessPrepweblogProcessLoadpreplog.exe" "" at "D:SSIS ProcessPrepweblogProcessLoad", The process exit code was "-1" while the expected was "0".
There are two package varaibles User::gsPreplogInput = ex.log User::gsPreplogOutput = out.log
I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.
For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
I am using the Execute Process Task and the process parameters I am providing are:
The customer.bat file will have the following code: tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:SQL_bat_Filessql5TC_CTIsql_filescustomer1"
the .sql file will be generated at: C:SQL_bat_Filessql5TC_CTIsql_filescustomer1.
The Problem: The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
[Execute Process Task] Error: In Executing "C:SQL_bat_FilesSQL5TC_CTIpackage_occurrence.bat" "" at "C:Program Files (x86)Microsoft SQL Server90COM", The process exit code was "2" while the expected was "0". ]
Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
Could anybody tell me how can I stop the executable program which I am using in Arguments field of Execute Process Task Editor window. My SSIS process based on three steps.
1. retrieve the file from FTP location 2. Process the file by using windows 32bit application 3. transfer the processed file back to FTP location
The problem occurs in step 2, it opens the win32 application for processing and it does process BUT after that it won't exit untill I close it manually, so it never reaches to step 3 if I don't close it.
We have a Process Task component setup in a couple SSIS jobs to call a command batch file to support transfering a file via Secure FTP to other servers and the process works fine if we start the SQL Agent job manually, however when the job is started via the scheduler, it fails with an exit code of 4. Even though there is a proxy setup on the agent job, is there a different user account being invoked by the scheduler??? We're on 2005 SP1 Hotfix 1 (2153). Thanks
Some more info...have found that if we leave a login session open on the server (login is the proxy account) the process works. It appears the issue is associated with a need to render/create a command window for the command line/batch process to run in and without an active windows session it fails....would seem to be that a product setup to run on a server in a batch mode would be able to work without this...is this the case? if so, how? Thanks.
Can anyone tell me how to capture the return code of a process launched by an Execute Process Task? I am able to capture the output by using the StandardOutputVariable but can't seem to capture the actual code.
Folks, I have a SSIS package that works 3 out of 4 times but it does fail occasionally with the following error.
The return value was unknown. The process exit code was 128. The step failed. I have logging enabled ..but mysteriously the log has no information on the failure..
I am running a Sql Server 2005 job and this job is having 25 steps. Each step is calling the .dtsx packae from D: drive location. While running the job i found this error
"The return value was unknown. The process exit code was 128. The step failed."
This error occurs not for any perticular step. It occurs randomally at any step.
I am running this job on 1. Windows 2003 server with SP2 2. Sql Server 2005 (Developer Edition) with SP2
Can any one please help me out resolving this issue.
I have changed a SSIS package last week. Now, I met the problem that the package sometimes failed both in SQL agent and the BIDs.
SQL agent just give the detail: Process Exit Code -1073741819. The step failed.
In BIDs,when I Check the log,there is even no error. But the last Infomation in the output windows is the package canceled. It just like somebody stop running package manually.
The more strange thing is the package sometimes succeed with running the same data.
I wish to have a batch file exit with a return code of 3 if it fails. In the batch file I have the single command: Exit 3 On SQL Server the Process Exit Code of a successful command is set to 0.
Yet, when I run the job SQL Server says that it is successful.
Can someone tell me how i can generate an exit code (Cmdexec). Ive tried running an .exe file in a job but when i do that the job hangs. When i check the history it says the exit code is somewhere in 27000. Now i'm wondering if it is possible for me to generate an exit code if the executable closes. PS. When i run the file from a batch file it works great
I am having trouble running a package in SQL Agent. The step involves zipping up a number of files using SQL Agent. I know in the error message it states "Access is denied" but I can run the package manually in BIS. Also I have applied a SQL proxy to the step using my own credentials which have rights to the file location, but still no luck.
I get the following error:
Error: 2008-03-10 09:04:02.04 Code: 0xC002F304 Source: Call ZipFiles Batch Execute Process Task Description: An error occurred with the following error message: "Access is denied". End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 09:04:00 Finished: 09:04:02 Elapsed: 1.219 seconds. The package execution failed. The step failed.,00:00:02,0,0,,,,0
I am having trouble running a package in SQL Agent. The step involves zipping up a number of files using SQL Agent. I know in the error message it states "Access is denied" but I can run the package manually in BIS. Also I have applied a SQL proxy to the step using my own credentials which have rights to the file location, but still no luck.
I get the following error:
Error: 2008-03-10 09:04:02.04 Code: 0xC002F304 Source: Call ZipFiles Batch Execute Process Task Description: An error occurred with the following error message: "Access is denied". End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 09:04:00 Finished: 09:04:02 Elapsed: 1.219 seconds. The package execution failed. The step failed.,00:00:02,0,0,,,,0
I have an execute process task in SSIS that executes a .Net program.When this is running as a Sql Server Agent job in Sql Server 2005, I have no issues. The operating system of the server is Windows Server 2003 R2.
Now I'm trying to get this working as a Sql Server Agent job in Sql Server 2012. The operating system of the server is Windows Server 2012 R2. And now I have issues.
If I run the SSIS package in Visual Studio debug mode, I have no issues! It's only when I try running the same package from a Sql Server Agent job that there are problems. The .Net program errors out with a System.TypeInitializationException.
I thought this might be an issue running the .Net program as 64 bit so I changed the agent setting to 32 bit. That didn't work. I thought it might be an issue with authorization (since I can run it in debug with me as the user). I put in a class in the program that changes the user through impersonation. That didn't work either.
Since I don't have a full-blown version of Visual Studio on the database server, I haven't been able to capture the error and debug the program to see where it is blowing up.
why something like this would work in Sql Server 2005/Windows 2003 but not in Sql Server 2012/Windows 2012 when run as an agent job? And on top of that, why would it work when I run it manually in debug mode but not when run as an agent job?
Exec Prcoess task with source : ftp destination :ftpunzip work directory ftpunzip executable : c:Program FilesWinZip
i am using expressing.
It is doing the unzip but getting this error
package process on server server1 has failed within the Task 'Unzip Files' with the following errors: > > File/Process "WZUNZIP.EXE" does not exist in directory "c:Program FilesWinZip".
Hello all, I have the need to connect to a network drive as a different user id when my SSIS package runs. If I stick the command into a batch script (forums don't play well with Opera, so sorry for code block not working)
@echo off C:windowssystem32cmd /c net use \ServereeShare SecretPassword /usererverSecretUser
If I call that batch script from SSIS, at the conclusion of execution I'll have a share mapped. To ease deployment and maintenance, I want to refrain from using the batch script. So, I set my task as so Executable: cmd.exe Arguments: /C WorkingDirectory: C:windowssystem32 StandardInputVariable: User::FileShareMappingParameters StandardOutputVariable: User::FileShareMappingOutput StandardErrorVariable: User::FileShareMappingError
and the rest are the default values. The value of User::FileShareMappingParameters is "net use \ServereeShare SecretPassword /usererverSecretUser"
My task does not fail nor do the output or errors variables get populated but I do not get my share. Anyone out there run into a similar situation or have a pointer on this one?
We have an SSIS Execute Process Task which calls an executable along with the required parameters. When we run this package, it intermittently gives the error as shown below in red
Executing "ppscmd.exe" "StagingDB /Server http://SERVERNAME:46787 /path OSB_FY08.Planning.dimensionECFuncArea /Operation LoadDataFromStaging" at "", The process exit code was "1" while the expected was "0". End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 5:05:08 PM Finished: 5:08:40 PM Elapsed: 212.203 seconds. The package execution failed. The step failed.
We are not able to debug this issue. We had a look at the logging information as well but we are not getting any information on this issue.
I am trying to exectue batch file which is located on other server. Can someone explain how to use execute process task? I can see Executable ,Arguments, working directory, standard input v ariable, standard output variable, Fail task if return code is not success, success value when I open execute process task .
Also when I try to execute the batch file I am getting "Publisher could not be verified window and then its working after clicking the RUN button on the message. How can I avoid this in SSIS ?
For example I have the batch files located in some location \112.156.82.9\BATCHFILES\FILENAME
A batch file when being executed using the "execute process task"(DTS package) gives problems whereas the same batch file without any change when executed manually from the explorer runs fine.
The problem in debugging is that sometimes the same task runs fine and sometimes not....
The batch file contains code to extract a zip file(zipped using arj) to a paricular directory.
In the properties sheet for a DTS Execute Process Task, there is a input box for 'Parameters' which allow you to add command-line options to the task exe specified. How can you use the DTS Global variables to be passed in this parameter field? Is there a special format to indicate that the parameters are in fact global variable tokens?
i have designed DTS packages, I have a script component that picks up the 'Path' of a file stored. The Path is a column in database and that obtained from OLEDB source.
now i need to zip the files in the path given above and than store it in some location. How do I do that?
We are attempting to use SSIS execute process task.
In a cmd.exe session the executable runs with normal arguments:
mycmd < myscript.txt > foo.txt 2>error.txt
We have attempted to several permutations of this without success. We declared variables and assigned them to stdin, stdout, stderr. However, mycmd opens in the SSIS session as if no arguments have been supplied.
Is there some expression that is required to connect the stdin/out/err variables in the Arguments within Execute Process Task. The help/examples are terse.
I have a FOREACHLOOP container, that is set up to loop through files in a directory:
Enumerator: Foreach File Enumerator
Folder: c:myfolder
Files: *.txt
Retrieve: Name and extension
Variable mappings: User::file_name, Index 0
So far, so good...
Then, inside the FOREACHLOOP, I have an Execute Process Task, which is simply a .bat file that I am running, and passing the name of the file to:
For example: myBat.bat file_name
In the Execute Process Task, I have:
RequireFullFileName: false
Executable: c:myFilemyBat.bat
WorkingDirectory: c:myFile
StandardInputVariable: User::file_name
Everything else is set to the defaults.
However, when I execute my container, I get the following error:
Error: 0xC0029151 at Execute Process Task, Execute Process Task: In Executing "c:myFilemyBat.bat" " " at "c:myFile", The process exit code was "1", while the the expected was "0".
Is there anything I am obviously doing wrong here at the package level? When I run the .bat file from the command line, it works fine.
My problem is that I am trying to set up an Execute Process Task to run a C# executable. The .exe captures information from an ftp site and downloads it into a directory on our server. Here is the command line run:
C:SAXOEodinReleaseSaxoEod
I have set the Execute Process Task up as follows:
I have the FailTaskIfReturnCodeIsNotSuccessValue set to False because when it is set to true I get the following error:
Error: 0xC0029151 at Execute Process Task, Execute Process Task: In Executing "C:SaxoEODobjReleaseSaxoEod.exe" "" at "", The process exit code was "-532459699" while the expected was "0".
Setting FailTaskIfReturnCodeIsNotSuccessValue to False does not work either because the files are not downloaded from the FTP site.
I am relatively new to the SSIS arena. I have googled this thing to death and have not found an answer. Any help in the right direction is appreciated. Thanks.
I need help with some C# code. I have build a SSIS package with an Execute Process Task. I need to send dynamic variables in to my C# program so I thought it was a good idea to use the StandardInputVariable.
On an Execute Process Task, are there properties I can examine to determine the outcome of a process? I know that I can use a Success/Failure constraint to direct my workflow appropriately, depending on the outcome, but I would prefer the workflow continue on to the same task regardless, and then be able to change the flow later on based on the outcome of the process.
I see there is an ExecValueVariable property, and this may be what I'm looking for, but I have no idea what this is and can not find any documentation on it. I tried using it, but kept getting a runtime error trying to set it to a variable.
I know that a process returns a numeric value, and it would be nice if I could store this somewhere.
