Execute SQL Task – Output Parameter On Stored Procedure Causes Task To Fail.
Dec 2, 2005
I have a SQL Task that calls a stored procedure and returns an output parameter. The task fails with error "Value does not fall within the expected range." The Stored Procedure is defined as follows: Create Procedure [dbo].[TestOutputParms] @InParm INT , @OutParm INT OUTPUT as Set @OutParm = @InParm + 5 The task uses an OLEDB connection and has a source type of Direct Input. The SQL Statement is Exec TestOutputParms 7, ? output The parameter mapping is: Variable Name Direction Data Type Parameter Name User::OutParm Output LONG @OutParm
View 7 Replies
ADVERTISEMENT
Jul 1, 2015
I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
View 3 Replies
View Related
Feb 28, 2008
Hi all,
I'm trying to capture the OUTPUT from Execute Sql task...However when I run, the parameter didn't seem to capture the OUTPUT.
In my Sql Task, the parameter mapping:
Variable name: user::variable,
direction: OUTPUT,
Data Type: Varchar,
parameter name: 0,
parameter size: -1
connectiontype: OleDB
sourcetype: direct input
statement ELECT columnx FROM table1 WHERE (columnID=
(SELECT MAX(columnID) ASID
FROM table1 A)
I could be misunderstood on how Execute sql task work on Output.
thanks
View 5 Replies
View Related
Jun 1, 2006
I'm having a heckuva time with creating output parameters based on a query.
Here's what I'm doing. Every day, we copy rows from our mysql table to our sql server table. We only want to copy those rows that are new, so as to not have to recopy the entire table.
So I have a DataReader Source set to Ado.net/odbc provider that connects to the mysql db.
The destination is an OLE connection to the local sql server.
I create an Execute SQL Task.
The connection is set to the OLE connection
The type is direct input
The SQL Statement is "select max(id) from copy_table"
In Parameter Mapping, I create a user variable called maxId that is an int64. That variable is now used as the Variable Name. The Direction is Output. The Parameter Name is 0.
Whatever data type I use for the mapping does not work with the variable type. If the parameter was set to ULARGE_INTEGER, here's the error
[Execute SQL Task] Error: Executing the query "SELECT MAX(stats_id) AS max_id FROM copy_table" failed with the following error: "Type name is invalid.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
If parameter is set to LONG:
[Execute SQL Task] Error: An error occurred while assigning a value to variable "maxId": "The type of the value being assigned to variable "User::maxId" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object. ".
I found that if variable and parameter were dates to use datetime for the variable and DBTIMESTAMP for the parameter.
There are an awful lot of combinations between all the possible variable types, and the possible parameter types. Does anyone know the secret combination for your typical integer?
Thanks,
Lori
View 5 Replies
View Related
Dec 17, 2007
Hi ALL,
I have a Execute SQL Task to execute a stored procedure. It has no input and output parameters.
The stored procedure is defined as follows:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
CREATE PROCEDURE [dbo].[SetSLATimePriority]
AS
BEGIN
DECLARE @PriorityID tinyint,@MAXPriorityID tinyint
DECLARE @Priority NVARCHAR(MAX), @SLATime int
SET @PriorityID=1
SET @MAXPriorityID=0
SELECT @MAXPriorityID=MAX([Priority ID]) FROM [MTD Dashboard].[dbo].[Priority]
SET NOCOUNT ON;
WHILE @PriorityID<=@MAXPriorityID
BEGIN
SELECT @Priority= [Priority] FROM [MTD Dashboard].[dbo].[Priority]
WHERE [Priority ID]=@PriorityID
SELECT @SLATime= [SLA Time in hours] FROM [MTD Dashboard].[dbo].[Priority]
WHERE [Priority ID]=@PriorityID
UPDATE [MTD Dashboard].[dbo].[Remedy Dump-Filtered]
SET [SLA Time] = @SLATime WHERE [Priority] like @Priority
SET @PriorityID=@PriorityID+1
END
END
The Properties of Execute SQL Task are set as follows:
Result Set: None
Connection Type: OLEDB
SQL Source Type: Direct Input
SQL Statement: EXEC ? = [dbo].[SetSLATimePriority]
IsQueryStoredProcedure: True
ByPassPrepare: False
Parameter Mapping:
Variable Name : User::IntValue
Direction: ReturnValue
Data Type: Long
ParameterName: 0
I am getting the following error, when I run this package.
[Execute SQL Task] Error: Executing the query "EXEC ? = [dbo].[SetSLATimePriority]" failed with the following error: "Invalid parameter number". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I am not able to figure out, where exactly the problem is.. Can some one please help me out?
View 3 Replies
View Related
Apr 17, 2008
Hi guys. I have a procedure with just one parameter. That's a output parameter. It's type is NVARCHAR
I think there's no problem with the procedure. Now I want to execute it. Can I declare that variable passed by parameter to the procedure ? Must I use the Execute command ?
thanks a lot.
View 3 Replies
View Related
Jun 30, 2006
I have a dts package that is essentially three transformation tasks that creates 3 text files. The transform data is accomplished through an sql query. Before I execute the transform tasks I would like to peform a couple of simple existence checks to verify data: i.e,
if exists (select * from table where week_ending = endoflastweek(getdate())
I could put the statement into the sql (if exists, begin/end) of each of the transformation tasks and prevent the process from executing, but it would be easier to put it into an "execute sql task" and if it succeeds, fail the task or make some kind of declaration not to proceed. I'm not sure how to do this...I know this can be done with an activeX script,
Main = DTSTaskExecResult_Failure
Is there a way to do this in an execute sql task step?
View 1 Replies
View Related
Mar 13, 2001
Hi
Is it possible in my DTS Package to check if a stored procedure which I'm executing from the Execute sql task icon can be tested for failure?
View 2 Replies
View Related
Jan 8, 2008
Dear all!
I have a SSIS packet. I declare a parameter that have scope of packet. I want to pass this parameter into a stored procedure and call this stored procedure from "Execute SQL Task".
Please help me how to call stored procedure with parameter from "Execute SQL Task".
Thank you very much
View 4 Replies
View Related
Jul 12, 2006
Hi ,
I am trying to exectue a stored procedure through execute sql task which takes two input parameters table name and filegroup to create a table and it also returns a value.
i am using the oledb connection
but i am getting the following error
[Execute SQL Task] Error: Executing the query "declare @rtn_value int exec spm_Utopia_FinanceUsage_Create_MonthlyTable ?,? select @rtn_value as rtn_value " failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
i tried with ado.net connection by directly giving the parameter names.
it will create a table but the the table name is something different from what i specified
Please do help as soon as possible
Thanks
Manish
View 2 Replies
View Related
May 29, 2006
Why does the Execute Package Task in SSIS always fail when set to execute in-process?
Having ExecuteOutOfProcess = False always results in that the package fails when run from within BI Studio.
I have also tried it from Command Line using dtexec., same results.
The problem with setting ExecuteOutOfProcess = True all the the time and running from within Bi Studio is that an enourmous amount of processes is created, none of which die because SSIS runs in Debug mode, another problem which is there doesn't seem to be a way to run it in Release mode so as not to get so many Dtexec processes, which ultimately results in having the Server die.
By Dying I mean, thrashing of the CPU & Memory. Page file to extreme limits.
And yes, the hardware should be able to take much more than what SSIS is supposed to eat. Dual 3GHz Xeon & 4GB of Ram.
Thank you.
My kind regards,
Eng. Ahmad Alkilani
View 2 Replies
View Related
Jul 12, 2007
Hi all,
I have an error when a package is trying to execute a SubPackage using the "Execute Package Task". I have this problem for all packages that are running sub packages.
The packages are stored in the DTSPackages folder of the SQL Server installation folder.
The master package is called from an Event Handler on a document library in MOSS 2007.
The account from the Sharepoint Application Pool has Full Control on the DTSPackages folder.
What am I missing ?
View 2 Replies
View Related
Jun 21, 2007
OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
Try
ds = CType(Dts.Variables("VP_EMAIL_RESULTS_RS").Value, DataSet)
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
thanks
John
View 5 Replies
View Related
Jan 15, 2008
Dear All!
I use a "Execute SQL Task" to call a Stored Procedure. My Stored Procedure have an input parameter with type: ntext. And in "Execute SQL Task", I set variable in Parameter Mapping as following:
Variable Name: User::xmlDocument (this variable is a String to store xml data)
Direction: Input
DataType: NVARCHAR
ParameterName: 0
When length of "User::xmlDocument" is too large then error is happen but on the contrary, "Execute SQL Task" run successfully.
So, Can you show me how to pass large data into stored procedure using "Execute SQL Task"?
I am looking forward to hearing from you
Thanks
View 20 Replies
View Related
Jun 9, 2006
I am new to this, but have scoured the web and not found an answer to my question...
I have an execute process task that runs a simple batch file. When this batch file completes with an ERRORLEVEL greater than 0, I would like the task to fail. I thought this simply meant setting the "FailTaskIfReturnCodeIsNotSuccessValue" property to true, and setting the SuccessValue to 0. However, this does not appear to work.
Even with a simple batch file forcing the errorcode to 1 as follows, the task still completes "successfully".
SET ERRORLEVEL = 1
Any ideas? Thanks!
View 8 Replies
View Related
Nov 7, 2015
I want to call "oracle" stored procedure with output parameter from SSIS ole db command task.
Actually I am able to successfully call the procedure but my Output value is not updating in the mapped column.
I used below PL/SQL query.
DECLARE
IS_VALID VARCHAR2(200);
BEGIN
IS_VALID(
PARAM1 => ?,
PARAM2 => ?,
IS_VALID => IS_VALID
);
? := IS_VALID;
END;
If I try to supply "OUTPUT" word I get error:
"ORA-06550: line 1, column 45:
PLS-00103: Encountered the symbol "OUTPUT" when expecting one of the following: . ( ) , * @ % & = - + < / >"
BEGIN
IS_VALID(
?,
?,
? OUTPUT
);
END;
how to receive output parameter value of oledb command while calling oracle stored procedures.
View 4 Replies
View Related
Apr 19, 2007
I have a stored procedure that returns XML and have defined my own "Root" element w/ "ROOT('urlset')" in the stored procedure. When I put this into my Control Flow, I have a subsequent task that takes this XML stream and writes it to a file. The issue I am running into is that SSIS is adding it's own "Root" element before my output. Is there any way of avoiding this?
View 4 Replies
View Related
Feb 1, 2007
Hi,
I am trying to do the following without success;
I have a UDF which returns a string of XML data (of the data type XML)
I want to use this UDF within an Execute SQL Task to set a variable to the output of the UDF. I then want to use the variable to pass the XML string to a XML Task to apply an XSLT to the XML.
I have set the following properties in the Execute SQL Task:
ResultSet: XML
SQLSourceType: Direct Input
SQLStatement: SELECT [dbo].[fn_GENERATE_XML](123) as rawxml
ResultName: 0
Variable Name:user::xml (where the variable is of type string)
My problem is something to do with the UDF call as if I substitute the UDF for a simple SELECT statement with a FOR XML Clause it works fine.
Any ideas where I am going wrong?
Thanks
View 1 Replies
View Related
Nov 12, 2007
I am using execute sql task to run a stored procedure in oracle database which returns a resultset. This works. Now I need to send the ouput to a destination table in a sql database. Should I use for each loop to pick the resultset and insert it into the destination one by one (which I dont think is a great idea) or is there a better way to accomplish this task (in data flow task) ?
When I use dataflow task instead of execute sql task, the main issue is I am not able to see the output columns when I execute an oracle stored procedure, but when I see the preview I can see the resultset . But I can see the output columns for a sql server stored procedure.
View 9 Replies
View Related
May 10, 2007
If ive got different pieces in a dataflow, how could I for example, see the output of a datasource before it gets to destination ? If im executing a task, what can i get access to from the immedate window to see the outputs at various stages ?
View 1 Replies
View Related
Aug 9, 2006
I'm having a hard time to getting back an xml data back from a stored procedure executed by an Execute SQL task.
I'm passing in an XML data as a parameter and getting back resulting XML data as a parameter. The Execute SQL task is using ADO connection to do this job. The two parameters(in/out) are type of "string" and mapped as string.
When I execute the task, I get the following error message.
[Execute SQL Task] Error: Executing the query "dbo.PromissorPLEDataUpload" failed with the following error: "The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Parameter 2 ("@LogXML"): Data type 0xE7 has an invalid data length or metadata length.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I also tried mapping the parameter as XML type, but that didn't work either.
If anyone knows what's going on or how to fix this problem please let me know. All I want to do is save returning XML data in the parameter to a local package variable.
Thanks
View 10 Replies
View Related
Oct 25, 2006
I'm just starting to find my way around SSIS, coming from SQL 2000 DTS, but I can't see a way of including a Win32 Console application's output into the logging process.
I've started playing around with SSIS Logs (OnTaskFailed etc..), but I can find no where to allow me to capture the output from a console app. In SQL 2000 DTS I could capture this by specifying an "output file" on the advanced tab of the job step definition. Is there something as straight forward as this in SSIS ?
I'd be grateful for a few pointers in the right direction.
View 4 Replies
View Related
Nov 5, 2007
I am building this as an expression, but it is not working. I am trying to return the row count into a variable to use later in an update statement. What am I doing wrong? I am using a single row result set. I have one variable defined in my result set. I am receiving an error stating: Execute SQL Task: There is an invalid number of result bindings returned for the ResultSetType: "ResultSetType_SingleRow". Any help is appreciated!
SELECT count(*) FROM hsi.itemdata a
JOIN hsi.keyitem105 b on a.itemnum = b.itemnum
JOIN hsi.keyitem106 c on a.itemnum = c.itemnum
JOIN hsi.keyitem108 d on a.itemnum = d.itemnum
WHERE a.itemtypegroupnum = 102
AND a.itemtypenum = 108
AND b.keyvaluechar = " + (DT_WSTR,2)@[User::Branch] + "
AND c.keyvaluechar = " + (DT_WSTR,2)@[User:epartment] + "
AND d.keyvaluesmall = " + (DT_WSTR,7)@[User::InvoiceNumber] + ")
View 6 Replies
View Related
Nov 7, 2006
I am trying to create an Execute SQL task that sets a variable.
This is my SQL
DECLARE @Period AS DATETIME
SET @Period =Parameter0 + '/01/' + Parameter1
SET @Period = DATEADD(m, -1, @Period)
SELECT DATEADD(s, -1, @Period)
This statement parses okay.
I mapped two variables called "User::PeriodMonth" and "User::PeriodYear" in the Parameter Mapping tab to the parameters.
In the Result Set tabl I have mapped a variable "User::PeriodStartDate" to Result Name "PeriodStartDate".
The error I get is the following:
[Execute SQL Task] Error: Executing the query "DECLARE @Period AS DATETIME SET @Period =Parameter0 + '/01/' + Parameter1 SET @Period = DATEADD(m, -1, @Period) SELECT DATEADD(s, -1, @Period) " failed with the following error: "Parameter name is unrecognized.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
The Online Books are not helpful. They just say you have to bind the parameters to the application variables.
What am I doing wrong?
I want to set another variable called "PeriodEndDate" also. Can both variables be set in the same task?
View 12 Replies
View Related
Jul 10, 2015
IS that possible to get teh output of a execute sql task to excel destination.I have query which will comapre the data difference between two databses. It will comapre all tables in both databses and list out the difference in data by each table. I need to run this query using SSIS and need to get the output to a excel sheet...I have used the data flow task to run this query but my query is giving some error when used with data flow task. So i have used excecute sql task and need to write teh out put to a excel sheet.
View 11 Replies
View Related
Apr 17, 2008
I have 2 questions on this
(1) I know how to use the ? ? ? and 0, 1, 2 notation in Parameter Mapping within Execute SQL Task. However, the interface allows me to give descriptive names to my parameters (other than the ordinals 0, 1, 2, ...). To be more clear, if you go into Parameter Mapping and click in Parameter Name column, you are not just restricted to typing in 0, 1, 2, ... You can type anything you want for the name. Does this suggest that I can use other things besides a "?" in my SQL command?
(2) What is Parameter Size? Is this like a data type? If so, why am I allowed to type in anything I want in there?
View 3 Replies
View Related
Dec 13, 2007
Hi All,
I am using a stored procedure defined as follows:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
-- =============================================
-- Author: <Author,,Name>
-- Create date: <Create Date,,>
-- Description: <Description,,>
-- =============================================
CREATE PROCEDURE [dbo].[GetPriority] @PriorityID TINYINT
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
SELECT [Priority]
FROM [MTD Dashboard].[dbo].[Priority] WHERE [Priority ID]=@PriorityID
END
I want to use this stored procedure in a Execute SQL Task. What should be the SQL Statement, Parameter mappings and Result Set?
Can someone please help me in doing this.
Thanks
View 5 Replies
View Related
Mar 9, 2006
I am trying to assign the same package variable value to three different parameters in a query. The variable contains the name of a database which the user will input during package execution. First I check to see if the database exists (if it does I drop it), then in either case I create the database. See code:
if exists
(
select name
from sys.databases
where name = ?
)
begin
drop database ?;
end;
go
create database ?;
go
This is the error I am getting:
[Execute SQL Task] Error: Executing the query "if exists ( select name from sys.databases where name = ? ) begin drop database ?; end; " failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
My "User::DestinationDatabase" variable is mapped to 0,1,2 using an OLE DB connection. Any suggestions would be welcome.
Regards,
DO
View 13 Replies
View Related
Mar 20, 2008
Hi All,
I have a Doubt in Parameter Passing in Execute SQL Task.
In Execute SQL Task, I have an Insert query in which I want to pass the Database Name Dynamically i.e. passing it as a parameter.
Eg.
The query is --------- Insert into [?].[dbo].[DimCurrency] values( value1, value2, value3)
I want to pass this Database name using a user variable. But I am not able to do so.
What is the catch in this, Can anybody please help me out.
Thanks & Regards,
kapadia Shalin P.
View 5 Replies
View Related
Jun 22, 2006
Is it not possible to have table name as a parameter? For example have the SQL something like:
Delete From ? Where ID = ?
.. I get error:
[Execute SQL Task] Error: Executing the query "Delete From ? Where ID = ?" failed with the following error: "Must declare the table variable "@P1".". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
View 5 Replies
View Related
Jun 18, 2007
I have a stored proc which starts like this:
CREATE PROCEDURE dbo.AddAttachmentListItem
@ListID uniqueidentifier,
@AttachmentPath varchar (260),
@DeleteAttachmentAfterSend bit = 0
I have a Script task which generates a GUID and stores it in the variable @[User::AttachmentListId], which is of type System.Object since Guid wasn't an option. Following this is an Execute SQL task (with an OLE DB connection to an SQL Server 2000 database) whose SQL statement is
EXEC AddAttachmentListItem ?, ?, 0
My parameter mapping looks like this (variable name, direction, data type, parameter name, parameter size):
@[User::AttachmentListId], Input, GUID, 0, -1
@[User::AFilePath], Input, VARCHAR, 1, 260
When I execute my package I get the following error:
[Execute SQL Task] Error: Executing the query "EXEC AddAttachmentListItem ?, ?, 0" failed with the following error: "The type is not supported.DBTYPE_GUID". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
This worked earlier when the first parameter was an int and not a uniqueidentifier, but I reworked my design because the GUID was a better choice for what I was doing. Well, at least 'til I got to this point....
Any ideas?
View 6 Replies
View Related
May 29, 2007
I'm trying to use "findstr.exe" to extract some lines of interest from a data file, which I will later load to a table. I'd like to issue this form of a command:
findstr.exe "^SEARCHSTRING" "srcfile" > "dstfile"
I build the arguments using expressions, and both the search string and source file get correctly set. However, the ">" seems to be ignored--I can see the lines spitting out to the temporary window when I run under VS.
QUESTION: how do you redirect the output of a command run under an Execute Process Task?
View 3 Replies
View Related
