I have a strange problem that I can't find any information about and was hoping someone could help me out.
Some background:
* I am calling an SSIS package from ASP.Net using the in-process, .net methods.
* I am importing a flat file into a staging SQL Server table using the OLE DB Destination.
* After I import the data, I call some Execute SQL Tasks that does some cleaning of the data.
* I then move the data from the staging table to a final table.
Here's the problem:
When the SQL Task like this:
WHILE @@rowcount > 0
UPDATE Staging_Table
SET [Test1] = REPLACE([Test1], SUBSTRING([Test1], PATINDEX('%[^a-zA-Z0-9 ]%', [Test1]), 1), ' ')
WHERE PATINDEX('%[^a-zA-Z0-9 ]%', [Test1]) <> 0
is supposed to be run, sometimes it will, sometimes it won't. The character replacement always works when I test the package through BIDS but when I call the package from code, sometimes the task doesn't seem to get called. Or, at least, it isn't updating the table correctly. The staging table is poplated and copied to the final table but the character replacement doesn't occur in-between.
Does anyone have any advice on the possible causes or where to investigate further?
now it is throwing the below mentioned error: SSIS package "DNB_GMS_PO_Transition.dtsx" starting. Error: 0xC0202009 at DNB_GMS_PO_Transition, Connection manager "CTSINNVLSDNB1SQLEXPRESS.cedprod.cedprod": An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user 'cedprod'.". Error: 0xC00291EC at Taking backup of the affected tables, Execute SQL Task: Failed to acquire connection "CTSINNVLSDNB1SQLEXPRESS.cedprod.cedprod". Connection may not be configured correctly or you may not have the right permissions on this connection. Task failed: Taking backup of the affected tables Warning: 0x80019002 at DNB_GMS_PO_Transition: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. SSIS package "DNB_GMS_PO_Transition.dtsx" finished: Failure.
i was unable to figure it out.but i had connected correctly to Database.
if i run those queries in the Query analyser with the same DB connection its running fine.
My problem is that I am trying to set up an Execute Process Task to run a C# executable. The .exe captures information from an ftp site and downloads it into a directory on our server. Here is the command line run:
C:SAXOEodinReleaseSaxoEod
I have set the Execute Process Task up as follows:
I have the FailTaskIfReturnCodeIsNotSuccessValue set to False because when it is set to true I get the following error:
Error: 0xC0029151 at Execute Process Task, Execute Process Task: In Executing "C:SaxoEODobjReleaseSaxoEod.exe" "" at "", The process exit code was "-532459699" while the expected was "0".
Setting FailTaskIfReturnCodeIsNotSuccessValue to False does not work either because the files are not downloaded from the FTP site.
I am relatively new to the SSIS arena. I have googled this thing to death and have not found an answer. Any help in the right direction is appreciated. Thanks.
Forget it -- I decided to take to crappy way out -- Instead of executing a procedure and trying to get the output when running a SSIS package, I simply run the query in the first step of the SQL Agent Job and fill a table with the results. All I have SSIS do is export the table to a flat file.
I'm getting the following when I try to run in BIDS: [Execute SQL Task] Error: Executing the query "dbo.prcCreatePayExtract" failed with the following error: "Query timeout expired". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
It appears that the timeout hits at 30 seconds which I've captured in SQL Profiler but I can't see to find where on earth in the package I can set the timeout. The "Timeout" on the task is set to zero and the Connection Timeout and General Timeout are both zero.
I have a manager SSIS package that calls a generic loader SSIS package, via the 'Execute Process Task'. The manger package (amongst other things) creates a config file and and then executes DTExec passing the config specification in the Arguments property, i.e. '
It works as expected, but, I always get the warning message 'File/Process "DTExec" is not in path.', I know that it is because the exe runs and loads the correct package which then performs the correct actions.
Have I dropped the ball here? I cannot see any reason for the warning as DelayValidation==True, I could set RequireFullFileName==True, but I do not know where SQL is installed on the various nodes.
I have an execute process task in SSIS that executes a .Net program.When this is running as a Sql Server Agent job in Sql Server 2005, I have no issues. The operating system of the server is Windows Server 2003 R2.
Now I'm trying to get this working as a Sql Server Agent job in Sql Server 2012. The operating system of the server is Windows Server 2012 R2. And now I have issues.
If I run the SSIS package in Visual Studio debug mode, I have no issues! It's only when I try running the same package from a Sql Server Agent job that there are problems. The .Net program errors out with a System.TypeInitializationException.
I thought this might be an issue running the .Net program as 64 bit so I changed the agent setting to 32 bit. That didn't work. I thought it might be an issue with authorization (since I can run it in debug with me as the user). I put in a class in the program that changes the user through impersonation. That didn't work either.
Since I don't have a full-blown version of Visual Studio on the database server, I haven't been able to capture the error and debug the program to see where it is blowing up.
why something like this would work in Sql Server 2005/Windows 2003 but not in Sql Server 2012/Windows 2012 when run as an agent job? And on top of that, why would it work when I run it manually in debug mode but not when run as an agent job?
We're trying to run an EXE from SSIS through "Execute Process" task.
The EXE folder contains other DLLs as well.
The EXE interacts with the database and reporting services and sends some e-mails(max 500 a day) out to customers.
My question is: Is it ok to run this kind of EXE on the production SQL box? If not, why? (People argue that running EXEs is not advisable on production boxes)
Q: Why did Microsoft introduce "Execute Process" task when we cannot run EXEs on the production box?
If somebody can educate whether it's ok to run such EXEs on prod SQLs.
In either case, some explanation is greatly appreciated.
I'm trying to run a task that executes a script file (cmd). When i run it with in bids with my own users (domain admin) it works. When i start a cmd prompt and try to run the cmd file directly from the network location where it is it works (with my own rights and with the sql server agent user).
Now when i try to run in from smss > agent jobs > job and run job it never completes. Im not getting any error message either it just keeps on running on the step ??? It seems like a rights issue, but the account running the sql server agent is able to execute the cmd file directly from the command prompt.
There are no errors in any error logs anywhere and no error is displayed...
Ps. Im running the job step as a integration service pacgake.
when I run a package from a command window using dtexec, the job immediately says success. DTExec: The package execution returned DTSER_SUCCESS (0). Started: 3:37:41 PM Finished: 3:37:43 PM Elapsed: 2.719 seconds
However the Job is still in th agent and the status is executing. The implications of this are not good. Is this how the sql server agent job task is supposed to work by design.
OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
I'm looking for a way to refer to a package variable within any Transact-SQL code included in either an Execute SQL or Execute T-SQL task. If this can be done, I need to know the technique to use - whether it's something similar to a parameter placeholder question mark or something else.
FYI - I've been able to successfully execute Transact-SQL statements within the Execute SQL task, so I don't think the Execute T-SQL task is even necessary for this purpose.
I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
I am using SQL 2005 SSIS. I am joining several large tables and then the move result into another table in the same database.
I would like know which method is faster:
Use Execute SQL Task to insert the result set to the target table
Use the Data Flow Task to insert the result set to the target table. (Use OLE DB source to execute SQL command and then use the SQL destination) Could you tell me why then other is slower?
I have a SQL Task that calls a stored procedure and returns an output parameter. The task fails with error "Value does not fall within the expected range." The Stored Procedure is defined as follows: Create Procedure [dbo].[TestOutputParms] @InParm INT , @OutParm INT OUTPUT as Set @OutParm = @InParm + 5 The task uses an OLEDB connection and has a source type of Direct Input. The SQL Statement is Exec TestOutputParms 7, ? output The parameter mapping is: Variable Name Direction Data Type Parameter Name User::OutParm Output LONG @OutParm
In the Control flow tab, I have an Execute SQL Task that outputs full Result set into a variable of an object type. Now how can I write the contents of the Full Result Set into a text file using Script Task. I also want to format the following way while I output into a file:
Column Name 1 : Column Value
Column Name 2: Column Value and so on
I tried writing the contents of the Object Variable into a file, but the file had an output of single word: System.__ComObject.
Code for Writing the Full Result Set into a Text File
Dim RSsqloutput as String = Dts.Variables("objVariable").Value.ToString
Dim strVal as String = "File completed on " & Now() & vbCrLf & "------------------------------------------------------" & vbCrLf
I have an application like fetching records from the DataBase(MS Access 2000) and results i have to use in Script Task. At present i have used the record fetching query,connection string in Script itself. I would like to use in Independently. Is there any Tools like (Control Flow Tools like Execute SQL Task) are there to fetch the result set from Acccess and can use the fetching results in Script Task....
I have a SSIS package contains an "Execute SQL Task". The SQL will raise error or succeed. However, it sounds the package won't pick up the raised error?
Or is it possible to conditional run other control flow items according the the status of SQL task execution?
For first time I'm testing this task and surprisingly, when I try "Edit Package" option:
1)The DTS host failed to load or save the package properly 2)The selected package cannot be opened 3)Error HRESULT E_FAIL has been returned from a call to a COM component
But after these messages you can see all the tasks but they haven't name!!
It seem as if RCW mechanism has failed between managed and unmanaged coded-partially.
I don't dare to follow doing more stuff, I don't know if that package is well-loaded or not from there. ?¿
My development environment is IIS 5.1, asp.net 2.0, Visual Web Developer 05 Express, MS Sql 2005 Express with XP Pro. I used a "stored procedure" in a webpage Formview to insert a record in a child table after inserting a record in the parent table. All went well when testing in VWD. After deploying to remote site on same machine, I get an error "EXECUTE permission denied on object 'usp_Insertdataset', database 'Job_Tracker_SQL', schema 'dbo'"
when trying to insert. I know that SQL Express is not suppose to support stored procedures. Is there a work around? I need to host this site on this machine for the immediate future.
I am trying to execute a SP in the execute SQL task in SSIS 2005..
but I keep getting an error:
SSIS package "Package.dtsx" starting. Error: 0xC002F210 at Load_Gs_Modifier_1, Execute SQL Task: Executing the query "exec Load_GS_Modifier_1 ?, ?" failed with the following error: "Could not find stored procedure 'exec Load_GS_Modifier_1 ?, ?'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. Task failed: Load_Gs_Modifier_1 SSIS package "Package.dtsx" finis
I have set up two user parameters: startdate and enddate.. I am not sure what I am doing wrong????
Here's a little SP to break up those long-running, massively-locking, bring-app-to-a-halt queries. By default it does 500 rows at a time and allows for a maximum SQL query size of 4000 characters; it should be trivial to adjust those.
Cheers -b
CREATE PROCEDURE p_BatchExecute (@vcSQL varchar(4000)) AS set nocount on DECLARE @iRows int select @iRows=1 SET ROWCOUNT 500 WHILE @iRows>0 BEGIN print 'Executing batch of 500...' exec (@vcSQL) set @iRows=@@ROWCOUNT END GO
How can I execute a long running transaction using something similar to the fire and forget pattern? I intend to start the execution of a very long stored proc from within IIS. I would like to execute a sql script that will start the job and return immediately so that it doesn't hold an IIS thread.
Phil writes "I have a simple question. My scenerio is that I would like to read a column from a table in a SQL database in the Execute SQL Task in SSIS. I would like to assign the value of that column (which is a nvarchar(50) column) to a variable.
The issue I'm having is that unless I make the variable's data type an "object" I am getting the:
"The type of the value being assigned to variable "User::output_location" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object."
error.
I've checked profiler and verified the call is getting to the database. Why can't I populate a nvarchar column to a string data type variable?
[Execute SQL Task] Error: Executing the query "INSERT INTO SSISLog (EventDate,StaffNo, EventType, EventDescription) VALUES ( '@[System::CreationDate]+', ' +@[System::SourceName]+' , 'OnError', '+ @[System::ErrorDescription] +' ) " failed with the following error: "Parameter name is unrecognized.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Any pointers will be highly appreciated. Oh and the purpose of this is to put error logs into the SSISLog table.
I am trying to run a Direct Input SQL query to SELECT MAX value of ColA. This query when I run on Query Window runs fine - means it is NOT a NULL. I get a max value.
When I run this query on a SSIS package outputing to a variable - I get the error. -
[Execute SQL Task] Error: An error occurred while assigning a value to variable "MAXROWKEYID": "The type of the value being assigned to variable "User::MAXROWKEYID" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object. ".
I need this output to be used for the subsequent steps which follows this.
I am using Value Type as Double. This was the default when I migrated this DTS package from SQL 2000. I use the proper Single Row for the Result Set and for outputing the Result Set, I use the correct Variable Name.
I execute a sql task to get full resultset. How do i stop processing (With Package success) the package (With Package success) if the resultset returned is empty? Their does not seem to be any swith or expression to stop processing if i dont get any results.
In the sqlstatement for Execute SQL Task, I want to specify a sql statement (if (select count(*) from table1 > 0) then execute next task, which is send mail task.
how do i achieve this? , how can I specify a conditional statement and execute the next task based on the result?
Hi, can anyone tell me how to create multiple tables using execute sql task. i am getting error messages when i try to execute. I am using OLE DB Connection type. and i am running Execute sql task insede the Foreach looop container. Error messgae is: [Execute SQL Task] Error: An error occurred with the following error message: "Access to the path 'C:Documents and SettingsAdministratorDesktopCreateTableSQLStatements' is denied.".
Thanks and regards, Sheetal sheetal_net@hotmail.com
