Execute SQL Task Passing Parameters To A Restore Command
Mar 22, 2007
Hi,
I'm very new to SSIS and I€™m trying to do the following in a SQL task
RESTORE DATABASE @DatabaseName FROM DISK = @Backup WITH FILE = 1, MOVE @OldMDFName TO @NewMDFPath, MOVE @OldLDFName TO @NewLDFPath, NOUNLOAD, REPLACE, STATS = 10
I'm using an OLE DB connection and I have mapped user variables to the various parameter names. Unfortunately when i test the above command it fails on must declare the scalar variable "@DatabaseName". How can i get my values to be substituted into the command?
Many thanks
Martin
View 4 Replies
ADVERTISEMENT
Feb 20, 2008
Hi
Can anyone help me in for the following.
i want to execute a exe file with two variable parameters
Executable : C: empMyExe.exe
Parameter1 : User::Category type is string (below example A)
Parameter2 : User::Amount type is string (below example 1)
in dos it looks like this
c: empMyExe A 1
This will executes fine.
Thanks,
Madhu
View 1 Replies
View Related
Feb 23, 2008
Hello all,I'm writing a site with one page that uses the session variable (User ID) to pick one user ID out of a comma separated list in the field Faculty. The default parameterized query designed in the SqlDataSource wizard only returns lines that contain an exact match:SELECT * FROM tStudents WHERE ([faculty] = @faculty) The query: SELECT * FROM tStudents WHERE ([faculty] LIKE '%userID%') works as I need when I hard code the query with a specific user ID into the SqlDataSource in the aspx page. It will not work if I leave the @faculty parameter in it:SELECT * FROM tStudents WHERE ([faculty] LIKE '%@faculty%') e.Command.Parameters works to replace the @Faculty with a user ID, but again, adding the single quote and percentage sign either causes errors or returns no results. I've tried several variations of: string strEraiderID = "'%" + Session["eRaiderID"].ToString() + "%'"; e.Command.Parameters["@faculty"].Value = strEraiderID;no results are returned, not even the lines returned with the default select query.How do generate the equivalent of SELECT * FROM tStudents WHERE ([faculty] LIKE '%userID%') into the SqlDataSource? Thanks much!
View 3 Replies
View Related
Nov 24, 1999
EXECUTE sp_makewebtask
@outputfile = 'd:WEBmultiple11.htm',
@query = 'SELECT title, price FROM titles' ,
@templatefile = 'd:WEBTemplate.htm',
@dbname = 'pubs', @rowcnt = 5, @whentype = 9
hi, running the above code will create html page. Ineed to pass @price as a parameters, how can I do that, thanks for your help
Ali
View 2 Replies
View Related
Mar 8, 2008
Hi,
I'm looking into the idea of building an enhanced version of dtexec.exe that builds in some extra logging features. My utility will execute packages using the Package.Execute() method.
Thing is, I'd still want to support all of the command-line options that dtexec supports. For example, my utility should accept "/set package.variables[myvariable].Value;myvalue" and pass it through to the executing package but I can't find a way of doing it using Package.Execute().
Am I missing something or is this just not possible?
Thanks
Jamie
[Microsoft follow-up]
View 7 Replies
View Related
Feb 20, 2006
Hello,
I have a SQL task wich executes the following statement on a OLEDB connection (SQL 2005 DB):
TRUNCATE TABLE DimTime
GO
DECLARE @CurrentDate AS Datetime
DECLARE @EndDate AS Datetime
SET @CurrentDate = '10-20-2003';
SET @EndDate = '10-20-2005';
while(@CurrentDate < @EndDate)
begin
INSERT INTO DimTime SELECT
DATEPART(month, @CurrentDate) AS MonthNumberOfYear
,DATEPART(quarter, @CurrentDate) AS CalendarQuarter
,DATEPART(year, @CurrentDate) AS CalendarYear
,dbo.GetSemester(DATEPART(month, @CurrentDate)) as CalendarSemester
,DATEPART(quarter, @CurrentDate) AS FiscalQuarter
,DATEPART(year, @CurrentDate) AS FiscalYear
,dbo.GetSemester(DATEPART(month, @CurrentDate)) AS FiscalSelester
set @CurrentDate = dateadd(month, 1, @CurrentDate)
end
GO
Now I want to parametrize the statement creating an external variable:
1. I created a datetime package variable (DimTimeStartDate)
2. Add update the above SQL statement to
SET @CurrentDate = ?;
3. I mapped the package variable to a new parameter (name 0)
Executing I get the following error:
[Execute SQL Task] Error: Executing the query " DECLARE @CurrentDate AS Datetime DECLARE @EndDate AS Datetime SET @CurrentDate = ?; SET @EndDate = '10-20-2005'; while(@CurrentDate < @EndDate) begin INSERT INTO DimTime SELECT DATEPART(month, @CurrentDate) AS MonthNumberOfYear ,DATEPART(quarter, @CurrentDate) AS CalendarQuarter ,DATEPART(year, @CurrentDate) AS CalendarYear ,dbo.GetSemester(DATEPART(month, @CurrentDate)) as CalendarSemester ,DATEPART(quarter, @CurrentDate) AS FiscalQuarter ,DATEPART(year, @CurrentDate) AS FiscalYear ,dbo.GetSemester(DATEPART(month, @CurrentDate)) AS FiscalSelester set @CurrentDate = dateadd(month, 1, @CurrentDate) end " failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Not clear what is wrong. Any help ?
Thanks,
Pierre
View 12 Replies
View Related
Aug 28, 2007
how can you pass variables from one 'Execute SQL Task' to another?
View 9 Replies
View Related
Mar 20, 2008
Hi All,
I have a Doubt in Parameter Passing in Execute SQL Task.
In Execute SQL Task, I have an Insert query in which I want to pass the Database Name Dynamically i.e. passing it as a parameter.
Eg.
The query is --------- Insert into [?].[dbo].[DimCurrency] values( value1, value2, value3)
I want to pass this Database name using a user variable. But I am not able to do so.
What is the catch in this, Can anybody please help me out.
Thanks & Regards,
kapadia Shalin P.
View 5 Replies
View Related
Aug 6, 2015
In temp table there rae data which start with 1 and 2.I want to select only those record which start with 1 Zone is a parameter to the Execute sql task in ssis package..I have created sample code to test when I am running my query I am not getting anything
create table #temp
( zoneid bigint
)
insert into #temp values(100000000000000000)
insert into #temp values(100000000000000000)
insert into #temp values(100000000000000000)
insert into #temp values(100000000000000000)
insert into #temp values(200000000000000000)
insert into #temp values(200000000000000000)
[code]...
View 6 Replies
View Related
Apr 26, 2008
I have a SSIS Execute SQL Task that calls a stored procedure with a date parameter. The text of the stored procedure is an "INSERT INTO .. SELECT ..." statement. When I run the text in Query Analyzer, it completes successfully. When I call the Stored Procedure, it executes but does not insert the data. Setting ByPass Prepare to True does not affect the outcome. I also used the query directly in the SQL task itself to no avail. Executing the query in Query Analyzer works. Any assistance would be greatly appreciated.
Dan
View 6 Replies
View Related
Oct 12, 2007
Hi, this might be a simple one, but I have been stuck on it for days. I am just getting into SSIS and have been muddling through it for the rest of this package but I am stuck on this. I am using this SQL Execute Task to run some lookup queries and then call the sp_send_dbmail stored procedure. I have this placed in a For Each loop container. I am using a SELECT DISTINCT Branch FROM table1 into an Object parameter, and passing that into the loop container. I am then using a Input Parameter into this SQL Execute Task of type String. I have run a Script task right before this step to ensure that the variable is populated and correct. Any assistance would be greatly appreciated!
Here is the SQL Execute Task :
DECLARE @SQL varchar(2400), @emaillist varchar(200),
@branchMgrEmail varchar(100), @officeMgrEmail varchar(100),
@branchMgrEmpNo varchar(5), @officeMgrEmpNo varchar(5), @subjectline varchar (100),
@Today varchar(10), @BranchNumber varchar(2)
SET @BranchNumber = ?
SET @Today = convert(char(8),getdate(),1)
SET @SQL = 'SELECT rtrim(CONVERT(char(10), PostedDate, 101)) AS Posted_Date,
CAST(Branch AS CHAR(2)) AS Branch,
CAST(Department AS CHAR(2)) AS Department,
CAST(InvoiceNumber AS CHAR(7)) AS Invoice_Number
FROM onbase.dbo.MHC_IncompleteRepairOrders
WHERE Branch = ' + @BranchNumber +
'AND HardCardCount = 0
AND WorkAuthCount = 0
AND QualityControlCount = 0
AND MiscDocsCount = 0'
SET @subjectline = @Today + ' - Repair Order Validation Notification for Branch #' + @BranchNumber
SET @branchMgrEmpNo = (SELECT branchempno FROM onbase.dbo.BranchMaster WHERE Branch = @BranchNumber)
SET @officeMgrEmpNo = (SELECT officeempno FROM onbase.dbo.BranchMaster WHERE Branch = @BranchNumber)
SET @branchMgrEmail = (SELECT empemailaddress FROM onbase.dbo.ActiveDirectory WHERE CAST(empno AS integer) = @branchMgrEmpNo)
SET @officeMgrEmail = (SELECT empemailaddress FROM onbase.dbo.ActiveDirectory WHERE CAST(empno AS integer) = @officeMgrEmpNo)
SET @emaillist = @branchMgrEmail + '; ' + @officeMgrEmail
BEGIN
EXEC msdb.dbo.sp_send_dbmail
@recipients = 'email@email.com',
--@recipients = @emaillist,
--@copy_recipients = 'email@email,
@attach_query_result_as_file = 0,
@subject = @subjectline,
@body = 'This email contains a list of Stuff
',
@query = @SQL,
@query_result_header = 1,
@query_result_separator = '|',
@query_result_width = 150,
@exclude_query_output = 1,
@profile_name = 'MAIL'
END
This is a copy of the ERROR message that I am receiving. Any suggestions?
failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Send email to Branch Mgr and Office Mgr
View 11 Replies
View Related
Oct 18, 2006
Hi!
I have a execute sql task to create and drop logins. I want to create/drop the ASPNET login, but I need to pass the domain using a parameter. So I mapped a parameter:
Variable name: User::serverName
Direction: Input
DataType: Varchar
Parameter Name:0
and the sql is the following:
CREATE LOGIN [?ASPNET] FROM WINDOWS
But I get the error:
Executing the query "CREATE LOGIN [?ASPNET] FROM WINDOWS failed with the following error: "Windows NT user or group '?ASPNET' not found. Check the name again.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
What am I doing wrong?
Thank you!
View 10 Replies
View Related
Feb 21, 2004
Hi everybody, I would like to know if it's possible to execute a stored procedure, passing it parameters, using not CommandType.StoredProcedure value of sqlcommand, but CommandType.Text.
I tried to use this:
sqlCmd.CommandType = CommandType.Text
sqlCmd.Parameters.Add(sqlPar)
sqlCmd.ExecuteNonQuery()
With this sql command:
"exec sp ..."
I wasn't able to make it to work, and I don't know if it's possible.
Another question:
if it's not possible, how can I pass a Null value to stored procedure?
This code:
sqlPar = new SqlParameter("@id", SqlDbType.Int)
sqlPar.Direction = ParameterDirection.Output
cmd.Parameters.Add(sqlPar)
sqlPar = new SqlParameter("@parent_id", DBNull)
cmd.Parameters.Add(sqlPar)
doesn't work, 'cause I get this error:
BC30684: 'DBNull' is a type and cannot be used as an expression.
How can I solve this?
Bye and thanks in advance.
P.S. I would prefer first method to call a stored procedure ('cause I could call it with 'exec sp null' sql command, solving the other problem), but obviusly if it's possible...=)
Sorry for grammatical mistakes.
View 9 Replies
View Related
Apr 28, 2004
I have a package (Package1) that is run from another package (Package2) via a Execute Package Task. I set a Global Variable called sErrorMessage in the in Package1 and would like to access that Global Variable in an ActiveX Script Task in Package2. How can I do this?
View 6 Replies
View Related
Nov 9, 2007
I am running my "execute process task" in a foreach loop that uses two variables (file paths) from the recordset that feeds into it.
My executable line looks like this: C:Program FilesWinZipWZZIP.EXE ,
which runs the command line Winzip executable and my argument line looks like this: -rp @ZipArch @ZipTxt.
When I replace the variables with literal strings, the process works (only once, of course).
My Argument won't parse in the expression editor, nor does the process run when embedded in the foreach loop. What am I doing wrong? Thanks for your help.
View 12 Replies
View Related
Oct 18, 2007
Hi,
I have an Execute SQL Task that contains the following line:
kill ?
I have a variable (Spid) that I would like to pass as a parameter.
The connection is OLEDB.
I have tried naming the parameter 0, 1 but to no avail
I have also tried:
kill @spid
and named the parameter @Spid. This also does not work.
The variable contains a value obtained from a query that returns a spid for a locked table and is type INT32.
Can I even use the kill statement in such a context?
View 4 Replies
View Related
Apr 22, 2008
Hi,
Can any one give me a solution how to call exe. Also, i need to pass 1 input to that exe.
I tried using Execute process task but it is not working.
My task is:
I have DFT , it generate a output file then after the output file generated i need to upload it SharePoint server.
So i developed one .exe using .net, C#. ( it is running fine when cmd line)
But i want to embbed in SSIS package.
Like :
DFT ( DataFlowTask) --------------------> OutPutFile.txt
EPT ( ExecuteProcessTask) ----------> Upload it to SharePointPortal.
Kindly give the solution ASAP.
Thanks
Senthil
View 4 Replies
View Related
Apr 2, 2008
I know you can pass parameters into a Direct Input and a Stored Proc in the Execute SQL Task Editor, but can you pass parameters to a File Connection? If so, then how would I do that?
Thank you,
Steve...
View 5 Replies
View Related
Apr 25, 2007
Hi,
we have a Package, that worked fine for a long time. Now, it always fails on all computers with SP2 instaled. The problem apears in execute sql task, which uses ole db connection manager and calls a procedure with some input parameters (from sql server).
Package sends a undesirable data (".") into the procedure from variable, which has NULL or Empty string value. Originaly, data type of the Variable was Object, I tried to use also string, but in both cases the procedure was called with parameter "."
Please, can anybody tell me what's wrong?
Thanks
Janca
View 2 Replies
View Related
Jul 28, 2005
I have created a job to execute a SSIS package located in the SSIS Package Store. When starting the job I receive an error. The history log reports:
View 12 Replies
View Related
Mar 29, 2007
I've encountered a new problem with an SSIS Pkg where I have a seq. of Execute SQL tasks. My question are:
1) In the First Execute SQL Task, I want to store a single row result of @@identity type into a User Variable User::LoadID of What type. ( I tried using DBNull Type or Object type which works, not with any other type, it but I can't proceed to step 2 )
2) Now I want to use this User::LoadID as input parameter of What type for the next task (I tried using Numeric, Long, DB_Numeric, Decimal, Double none of there work).
Please give me solutions for the above two..
View 6 Replies
View Related
Dec 8, 2005
Hi, I need to send a table data into flat and then ftp into different location.
I was using xp_cmdshell via sql task but my network engineer is saying that this xp_cmdshell will break the security and recomond to use "Execute Process Task". If i'm using this task getting the below error.
Could you advice me regrding network engineer thought and any solution for avoiding this error.
---------------------------
Execute Process Task: C:WINDOWSsystem32ftp.exe
---------------------------
CreateProcessTask 'DTSTask_DTSCreateProcessTask_1': Process returned code 2, which does not match the specified SuccessReturnCode of 0.
---------------------------
Thanks,
View 1 Replies
View Related
Jan 8, 2002
Hi
SQL server 2000 DTS Problem
I'm trying to pass the value of a global variable
as an input parameter in a 'execute sql task' DTS object.
However, SQL refuses to accept the global variable
assigned to the input parameter '?'. When you run the
DTS package the error message 'no value given for one or
more parameters' appears.
When you save / exit the DTS object by clicking OK, and then go
back into it, the 'input Global variables'
parameter field is empty again.
Searched msdn/knowledgebase to no avail - please help ! Thanks
Help much appreciated please !
View 6 Replies
View Related
Sep 20, 2007
Hi,
I have an Execute SQL Task in my SSIS Package.
Now, this Execute SQL Task has the following query (Connection Type is OLE DB):
Code SnippetSELECT dbo.udf_CommonDateTime_Get (GetDate(), ?) As User_Datetime
I want 2 things from this Task:
1) It should take the 2nd argument to the UDF from a variable.
2) It should store the value returned by this SELECT statement into another variable.
So, I go ahead and modify the Parameter Mapping for the Task. Here I add the Input variable name, Data type and I give the Parameter Name as 0.
I also modify the Result Set for the Task. Here, I specify the Result Name as User_Datetime and give the appropriate Variable Name.
I am getting an error here and I believe it is due to the input parameter. The UDF is not getting the 2nd argument correctly.
My questions:
1) Has the Execute SQL Task been designed to handle UDFs like this. If not, then where am I going wrong?
2) What is the work-around for this? I need to pass a parameter (variable) to the UDF.
Thanks in advance.
Regards,
B@ns
The error message is:
Code Snippet
Execute SQL Task: Executing the query "SELECT dbo.udf_Common_DateTime_Get (GetDate(), ?)
As User_Datetime" failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Set UserDateTime
View 5 Replies
View Related
Mar 4, 2014
I've got a package in SSIS 2012 that has an Execute SQL task in the control flow level.
The SQL in question does an Upsert via the SQL merge statement. What I want to do, is return the count of records inserted and records updated (No deletes going on here to worry about). I'm using the output option to output the changed recs to a table variable.
I've tried returning the values as:
Select Count(*) as UpdateCount from @mergeOutput where Action = 'Update'
and
Select Count(*) as InsertCount from @mergeOutput where Action = 'Insert'
I've tried setting the resultset to both Single rowset and Full rowset, but i'm not seeing anything returned to the package variables I've set for them (intInsertcount and intUpdatecount).
View 2 Replies
View Related
Oct 2, 2006
I have a ForEachLoop parent pkg that reads thru the file system of dtsx to be executed.
I would like to pass CLI parms to the command itself (dtexec). I'm not looking at passing values to the child pkgs but rather additional command line values such as:
/CONFIGFILE "C:myconfig.dtsConfig.
In my expression builder for the PackageName I added the additional string but during the execution, the reference to my dtsconfig is ignored without any errors and the child pkg runs using the default values provided at design time.
@[User::PackageToRun] + " /CONFIGFILE C:\myconfig.dtsConfig ".
How does one add additional CL values during the runtime for Execute Package Task?
Thanks,
Anatole
View 3 Replies
View Related
Jul 27, 2004
Hello,
I have several DTS packages that take data from SQL Server and exports them onto an Access DB located on the network. Basically, one Execute Process Task from within my DTS package takes the Access DB and zips it while another such task copies the zipped DB and pastes it onto another location on the network. All this works fine.
This export process happens once a month so each month I have to manually add a datestamp to the end of the Access DB file that’s being exported to distinguish it from prior month's export. For example, this month's export file would have AccessDB_20040727.mdb name and the next month it would be AccessDB_20040820.mdb (date is determined based on the date the output is exported on). AccessDB.mdb is the default name of the export DB and datestamp is added at the end of the file name depending on what date the export was run. As I said, I can do this manually each month and it works fine.
I want to, however, know if there is a way to automatically supply the datestamp to the Execute Process Task's Parameters' text box? Following is what I have right now in the Parameters box:
\ghf1-ndc8-sqll$productionoutputlob200406LOB_CF_forDril ldown_All_20040727.zip \ghf1-ndc8-sqll$productionoutputlob200406LOB_CF_forDril ldown_All.mdb
I want to take above text from the parameters box and replace it with something like:
\ghf1-ndc8-sqll$productionoutputlob200406FileName_RunDa te.zip \ghf1-ndc8-sqll$productionoutputlob200406LOB_CF_forDril ldown_All.mdb
Where FileName_RunDate is a variable/placeholder for the name of the output with the datestamp the output is exported on.
There are three different Execute Process Tasks that are happening within each of my DTS packages so it's a time consuming job to have to manually add a datestamp to each package every month when data is exported.
Does anyone know if what I am asking is doable? If I can use a variable in the parameters box of each Execute Process Task’s properties and supply current datestamp values to it prior to executing the package each month? If so then what are the ways? How would I do that?
Thanks much.
JN
View 2 Replies
View Related
Feb 23, 2006
Hi,
I need to run an SQL command, in which one of the fields is based on the current time, represented as a string in a specific format.
I used a script task to create the string from the current time, and store it in a package variable named "newDate". Later, in the execute sql task, I have the following update statement: "update table_1 set field_1 = ?" (OLE DB connection is used)
and in the parameters mapping I set parameter 0 to the string package variable "newDate".
The problem is that on runtime, the sql executes with the default value of the variable - i.e. it doesn't take the new value.
I checked it and placed another script task after the first one, that simply tries to read the variable "newDate" and print it to screen, but even here the default value is used.
how can I use the new value of the variable?
thanks.
View 7 Replies
View Related
May 15, 2015
I am using SSIS 2012 to dynamically backup stored procedures on a list of Servers and Databases.Here are the steps in my package,
1. Execute SQL Task: Captures a result set (configured to save the data set in an Object variable) with all the Servers and Databases on which stored procedures exist.
2. For each loop that is configured to get each each row(server name @[User::Server_Name] and databases name @[User::DataBase_Name]) from the object variable (@[User::Connection_Strings])and pass it to a connection manager that has an expression for servername
and database name.
2a) Â Within the for each loop, i have an execute process task that is configured as
 i) Executable:  C:WindowsSystem32WindowsPowerShellv1.0powershell.exe
 ii) Arguments:  Configured this to fetch value from an expression. The expression i am using is,'C:batch - CopyPowerShell Scripts to Backup Stored ProceduresScriptOutSPs.ps1' -$Server_Name "+ @[User::Server_Name]+ " -$Database_Name "+ @[User::DataBase_Name]
      Â
Note:  @[User::Server_Name] is the Servername from object variable and so is @[User::DataBase_Name] for database name . The execute task is to run a command line that triggers a powershell script with parameters. Here is the powershell script that i am using,
param([String]$Server_Name,[String]$Database_Name)
$Server = $Server_Name
$Database = $Database_Name
$savePath = "SalesDepartmentsData ScienceUsersSANDEEP PStoredProcedures_Backup"
[code]...
When i execute the script, by passing parameters from arguments, it executes successfully but nothing happens. Passing wrong arguments in the expression?
View 3 Replies
View Related
Jul 12, 2006
Hi ,
I am trying to exectue a stored procedure through execute sql task which takes two input parameters table name and filegroup to create a table and it also returns a value.
i am using the oledb connection
but i am getting the following error
[Execute SQL Task] Error: Executing the query "declare @rtn_value int exec spm_Utopia_FinanceUsage_Create_MonthlyTable ?,? select @rtn_value as rtn_value " failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
i tried with ado.net connection by directly giving the parameter names.
it will create a table but the the table name is something different from what i specified
Please do help as soon as possible
Thanks
Manish
View 2 Replies
View Related
Aug 29, 2007
[Microsoft follow-up]
dtexec.exe allows us to pass values into a package using /SET and a property path. Why can't we do the same using the Execute Package Task?
And yes, I know about Parent Package Configurations, I use them alot. But I would still like the ability to pass values in.
-Jamie
View 11 Replies
View Related
Dec 31, 2007
Good day everyone,
I have a question concerning the Execute SQL task.
Problem Statement:
I have a table containing the following sample data.
Catalog_ID, Product_ID, IsBlocked
56789, 1, 0
56789, 3, 1
23567, 1, 0
23567, 2, 1
The data types of the fields are:
Catalog_ID: bigint
Product_ID: bigint
IsBlocked: bit
I have two variables called "old_catalog_id" and "new_catalog_id" with the following values:
old_catalog_id: 56789
new_catalog_id: 11111
Now, I would like to select all the recods, whose Catalog_ID fields equals the value in the variable "old_catalog_id" and insert identical recods with the "new_catalog_id" value.
The result of that operation on my sample records is:
Catalog_ID, Product_ID, IsBlocked
56789, 1, 0
56789, 3, 1
23567, 1, 0
23567, 2, 1
11111, 1, 0
11111, 3, 1
blue: selected fields
green: inserted fields
My Solution:
In order to realize this solution, I have created the following tasks on the Control Flow.
1. Create an Execute SQL Task for the selection. (Name: Selection Task)
2. Create a For-Each-Loop for iterating on the result set. (Name: Loop on results Container)
3. Create an Execute SQL Task inside the For-Each-Loop container for inserting the new records. (Name: Insertion Task)
Configurations and Problems:
1. Selection Task:
General Tab:
Result Set: Full Result Set
SQL Statement:
select Product_ID, IsBlocked
from MyTable
where Catalog_ID = ?
Parameter Mapping Tab:
Variable Name -- Direction -- Data Type -- Parameter Name
User:: old_catalog_version -- Input -- Large_Integer -- 0
Result Set Tab:
Result Name -- Varibale Name
0 -- User::FullResultSet (which has the Data Type: Object)
When I execute this task, I get no records.
Thus, I have hard-coded the value of Catalog_ID in the Sql Statement parameter. Now, I get the correct 2 records in the result set.
Question 1: What am I doing wrong in the Parameter Mapping?
2. Loop on results Container:
Collection Tab:
Enumerator: Foreach ADO Enumerator
ADO object source variable: User::FullResultSet
Enumeration mode: Rows in the first table
Variable Mappings Tab:
Variable -- Index
User:: old_prod_id -- 0 (Data Type of "old_prod_id" is Int64)
User:: old_isBlocked -- 1 (Data Type of "old_isBlocked" is Boolean)
When I execute the package, it fails with the following error message:
Error: 0xC001F009 at SQL Tasks: The type of the value being assigned to variable "User:: prod_id" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
Thus, I have changed the data type of the variable "old_prod_id" to Object. Now, the package runs successfully.
Question 2: Why isn't the package accepting "Int64" as the data type of my variable, although the corresponding DB field has the type "bigint"?
3. Insertion Task:
General Tab:
Result Set: None
SQL Statement:
insert into MyTable
(Catalog_ID, Product_ID, IsBlocked)
values (?, ?, ?)
Parameter Mapping Tab:
Variable Name -- Direction -- Data Type -- Parameter Name
User::new_catalog_version -- Input -- Large_Integer -- 0
User:: old_prod_id -- Input -- Large_Integer -- 1
User:: old_isBlocked -- Input -- Variant_Bool -- 2
When I execute this task, it fails with the following error message:
Error: 0x0 at Insertion Task: The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Catalog2Context_CATALOGS". The conflict occurred in database "XS_EC_CCH_PEGXSAP2", table "eSearch4.CATALOGS", column 'ID'.
Well, the message implicitly states that the value of the variable "new_catalog_version" has violated the mentioned FOREIGN KEY constraint. But I have set a breakpoint and I saw that the value was set correctly. So, it seems that the Execute SQL Task is not able to read the value of the variable correctly.
Question 3: What am I doing wrong in the Parameter Mapping, which causes the task not being able to read the value of the variables correctly?
Thanks in advance for your help.
Regards,
Samar
View 3 Replies
View Related
Aug 26, 2015
I'm trying to execute a simple VBS file from the Executable command line in the Execute Process Task Editor.
My line is this : cscript.exe "c:convertcsvssisXlsToCsv.vbs"
SSIS keeps saying there are illegal characters here. Â I've Googled and looked about 20 articles and I can't resolve it.
I have a ForEach that loops through Excel files and changes them to CSV files using code i found. This script takes an original Excel file and transfers it to a new CSV file in a new directory.
So in DOS at the CMD line I would type : XlsTocsv.vbs originalfile.xls newfile.csv
I have the original file and new file in the Arguments line so I'm assuming that after the script executes it will look at the filepaths in the loop and loop through them so I want it do to this when it runs:
XlsTocsv.vbs [User::@ExcelFile] [User::@CSVFile]
I just can't get it to execute and I keep getting illegal characters. Â
View 5 Replies
View Related
