Hi,
Im just wondering, does the Execute SQL task have a length limitation of how long the SQL statement can be, I tried to copy and paste a very long SQL statement from my DTS execute job task to a new SSIS execute SQL task and the statement was truncated and I cannot enter anymore text after that
anyone have experience with this ?
Out of Memory when working with big XML Files:when validating XSD it process small files but when size close to 1gb it throws .I have 16 xml files out of which 8-10 Â files size will be around 1gb processing one by one in FOR EACH LOOP container in SSIS[XML Task] Error: An error occurred with the following error message: "Exception of type 'System.OutOfMemoryException' was thrown.".Task XSD Validation failed.
system configuration :
processor:Intel(R) Xeon (R) CPU E5-2670 v2 @2.50GhZ 2.50 Hz
Installed memory (RAM): 61 GB
System type: 64 -Bit operating System
Visual studio:2012,32 bitÂ
virtual memory : 12499 MB
whether the size of the XML Document a limitation for the validation task ? or any system configuration i need to improve?
Hi,
Can somebody tell me if the 4 GB database size limit is per database or for all the databases
Regards
Harish
I found an article that stated that there was a limit of 1GB of total user databases for SQL on Small Business Server. I could not tell if that was SBS 2003 or an earlier version. Does anyone know if there is any limitation?
View 1 Replies View RelatedI have created a backup device. THe file it wrote (.dat) is 1.2 gig when I tried to run another backup to it it failed (3sec) Is there a size limitation on the Device or .dat file size?
Just testing things out I tried to directly open this file and it gave me a memory problem(Try closing other applications not enough memory to open "filename").
I would appreciate your help, thanks
Jerry
Hi,
I am porting data between sql65 servers. I am transfering data using bcp , while doing bcp i am getting following error.
DB-Library error: Attempt to bulk-copy an oversized row to the sql server.
DB-Library error: Attempt to convert data stopped by syntax error in source field.
My row size in the particular table is : 170 bytes length.
Can anyone have idea, what is row size limitation in 65.
i am having service pack 5a.
--RK
Hi all,I am new to the ADODB.StreamI am using following codelRecordset.Open "Select * from <some table-name>"'this query return more than 1000 recordsdim lstream as new ADODB.stream'assigning the recordset data to the streamlrecordset.save lstreamlStream.Position = 0Dim lRecordset2 As New ADODB.RecordsetlRecordset2.Open lstreamMsgBox lRecordset2.RecordCountmy problem is that query is returning say 1500 records but when i amagain assigning the same stream to another recordset it is copyingonly 485 recordsthat is lstream is saving only 485 records...is there any size limiton stream...?how i can do this using stream only....If u have any solution plz reply back..Thanks in advance...
View 1 Replies View Related
I am using FileSystemTask to copy around 4 gb file(ASCII). Is there any limitation on the file size.
SQL Server 2005 SP2, Windows 2003 server. Copying from one Windows 2K server to other Windows 2K server.
Thank you,
Hello,
Does anyone know of a reg hack we can use to temporarily increase the size of the sql express limitation of 4 GB?
thanks, ken
Hello,
View 6 Replies View RelatedHI Everyone,
I understand that there is a 4GB size limitation on SQL Server Express edition. right?
What I want to know is what if a database file created in SQL Express is hosted with SQL Server 2005 will the file still have the 4 GB size limitations?
Thanks
I am running 7.0 standard desktop on Workstation 4.0 and have run into a database size limitation of 10GB. I have all the newest
patches and have found no documentation that refers to a 10GB limitation. A September copy of VBA developer says that this edition
has a limitation of 4GB while the guides say that the Small Business Server edition would have a 10GB limitation. All other forms
of documentation say that there should be the standard mega-terabyte limit. I'm completely confused by this [lack of] documentation.
Any help???
Does sql server 2012 support varbinary data type for replication (Merge or transaction)?
And if so, is there a limitation of data size?
I've never worked with the XML data type in SQL Server, although I know its been there for a few iterations of SQL SErver. Now I've got a situation in which it might store some configuration data as XML, since that's the way it comes. (We had thought about storing the data in a VARCHAR(MAX) field.)
The first question is does the XML data type have a size limitation? For example do you do something like:
ConfigFile XML(1000) NULL
Or is it just something like this:
ConfigFile XML NULL
The second question is persisting the data to a file. As the name I choose for the variable suggests, we want to save the data from a configuration file into a SQL Server database. How do we go about doing that? We'll be developing a C# application, it will read and write the data both from the SQL table and the user's local HD.
Hello,
I have a project (using classic ASP & SQL Server) which adds one execute sql statement at a time to a temporary array, and then I join that array with a chr(30) (record separator), to a string variable called strSQL. I then run the following line of code:
conn.execute(strSQL)
I was wondering if there was any limitation to how large the strSQL variable can be? Reason I ask is because thru log writes I can see all of my sql execute lines exist in the variable strSQL prior to running the "conn.execute(strSQL)" command; however, not all of the lines run at the time of execution. Remember, this bug only is occuring whenever I have say over 600 sql lines to execute.
My understanding is that there was no limitation on the size of the string strSQL; however, in the interest of getting the bug fixed quick enough, I decided to just run a loop for each sql statment and run "conn.execute(strSQL)" every 50 times. This, in turn, has solved the problem and I do save all of my data; however, my original bug still exists.
Does anyone know why I have to split the sql commands and execute.com every 50 times instead of just being able to do it once ?
Please let me know. Thanks in advance.
Hi everyone,
I wonder about this task.. which is the limit size for attachments? Is it depending of SMTP server?
Thanks in advance,
OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
Try
ds = CType(Dts.Variables("VP_EMAIL_RESULTS_RS").Value, DataSet)
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
thanks
John
Dear all:
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
Many thanks,
Tomorrow
I'm looking for a way to refer to a package variable within any
Transact-SQL code included in either an Execute SQL or Execute T-SQL
task. If this can be done, I need to know the technique to use -
whether it's something similar to a parameter placeholder question
mark or something else.
FYI - I've been able to successfully execute Transact-SQL statements
within the Execute SQL task, so I don't think the Execute T-SQL task
is even necessary for this purpose.
I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
View 3 Replies View Related
I am using SQL 2005 SSIS. I am joining several large tables and then the move result into another table in the same database.
I would like know which method is faster:
Use Execute SQL Task to insert the result set to the target table
Use the Data Flow Task to insert the result set to the target table. (Use OLE DB source to execute SQL command and then use the SQL destination)
Could you tell me why then other is slower?
Thanks.
I have a SQL Task that calls a stored procedure and returns an output parameter. The task fails with error "Value does not fall within the expected range." The Stored Procedure is defined as follows: Create Procedure [dbo].[TestOutputParms] @InParm INT , @OutParm INT OUTPUT as Set @OutParm = @InParm + 5 The task uses an OLEDB connection and has a source type of Direct Input. The SQL Statement is Exec TestOutputParms 7, ? output The parameter mapping is: Variable Name Direction Data Type Parameter Name User::OutParm Output LONG @OutParm
View 7 Replies View RelatedIn the Control flow tab, I have an Execute SQL Task that outputs full Result set into a variable of an object type. Now how can I write the contents of the Full Result Set into a text file using Script Task. I also want to format the following way while I output into a file:
Column Name 1 : Column Value
Column Name 2: Column Value and so on
I tried writing the contents of the Object Variable into a file, but the file had an output of single word: System.__ComObject.
Code for Writing the Full Result Set into a Text File
Dim RSsqloutput as String = Dts.Variables("objVariable").Value.ToString
Dim strVal as String = "File completed on " & Now() & vbCrLf & "------------------------------------------------------" & vbCrLf
oLogFile.WriteAllText("C:MyFile.txt", strValue)
oLogFile.WriteAllText("C:MyFile.txt", rsSQLOutput)
I went through this link that explains how to write XML Result Set into a File, But this doesn't help as it writes in XML format.
Would you please give me a hint of code how I can go upon.
Hi
I have an application like fetching records from the DataBase(MS Access 2000) and results i have to use in Script Task. At present i have used the record fetching query,connection string in Script itself. I would like to use in Independently. Is there any Tools like (Control Flow Tools like Execute SQL Task) are there to fetch the result set from Acccess and can use the fetching results in Script Task....
Thanks & Regards
Deepu M.I
I have a SSIS package contains an "Execute SQL Task". The SQL will raise error or succeed. However, it sounds the package won't pick up the raised error?
Or is it possible to conditional run other control flow items according the the status of SQL task execution?
Hi everyone,
For first time I'm testing this task and surprisingly, when I try "Edit Package" option:
1)The DTS host failed to load or save the package properly
2)The selected package cannot be opened
3)Error HRESULT E_FAIL has been returned from a call to a COM component
But after these messages you can see all the tasks but they haven't name!!
It seem as if RCW mechanism has failed between managed and unmanaged coded-partially.
I don't dare to follow doing more stuff, I don't know if that package is well-loaded or not from there. ?¿
Any guidance or idea about this?
An Execute SQL task takes 1 min to run a statement "insert into Mytable select * from view_using_joins"
Output: 10,225 rows affected.
But a Dataflow task configured to fetch data from the same view_using_joins into MyTable takes hours to do the same.
Could you please explain why is it so ?
Thanks
Subhash Subramanyam
I am trying to execute a SP in the execute SQL task in SSIS 2005..
but I keep getting an error:
SSIS package "Package.dtsx" starting.
Error: 0xC002F210 at Load_Gs_Modifier_1, Execute SQL Task: Executing the query "exec Load_GS_Modifier_1 ?, ?" failed with the following error: "Could not find stored procedure 'exec Load_GS_Modifier_1 ?, ?'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Load_Gs_Modifier_1
SSIS package "Package.dtsx" finis
I have set up two user parameters: startdate and enddate.. I am not sure what I am doing wrong????
Phil writes "I have a simple question. My scenerio is that I would like to read a column from a table in a SQL database in the Execute SQL Task in SSIS. I would like to assign the value of that column (which is a nvarchar(50) column) to a variable.
The issue I'm having is that unless I make the variable's data type an "object" I am getting the:
"The type of the value being assigned to variable "User::output_location" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object."
error.
I've checked profiler and verified the call is getting to the database. Why can't I populate a nvarchar column to a string data type variable?
Thanks,
Phil"
hi
I have created an Execute SQL Task package and save as package.dtsx
using northwind database
In this package, i have a sql statement: Select * into tblTest from dbo.Orders where OrderID >= ? and OrderID <= ?
I have created 2 package level variables which is OrderID1 and OrderID2, both are Int32 and Value = 0.
I have also used parameter mapping: user:OrderID1,Input, Long, 0, -1
user:OrderID2,Input, Long, 0, -1
I have created a proc to test:
Create Proc spTest
@Value1 int,
@Value2 int
as
Declare @cmd varchar(1000)
set @cmd = 'dtexec /FILE "C:Package.dtsx" /SET Package.Variables[OrderID1].Value;@Value1 /SET Package.Variables[OrderID2].Value;@Value2'
exec master..xp_cmdshell @cmd
When I execute spTest 10249,11029, it gave me "it could set Package.variables[OrderID1].value;@Value1 and so on.
I hope someone could help me with this. Thanks
Hey all
I have created an SQL Task with the following as SQL Statement Source expression:
"INSERT INTO SSISLog (EventDate,StaffNo, EventType, EventDescription)
VALUES (
'@[System::CreationDate]+',
' +@[System::SourceName]+' ,
'OnError',
'+ @[System::ErrorDescription] +'
)
"
And I get the following error:
[Execute SQL Task] Error: Executing the query "INSERT INTO SSISLog (EventDate,StaffNo, EventType, EventDescription) VALUES ( '@[System::CreationDate]+', ' +@[System::SourceName]+' , 'OnError', '+ @[System::ErrorDescription] +' ) " failed with the following error: "Parameter name is unrecognized.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Any pointers will be highly appreciated. Oh and the purpose of this is to put error logs into the SSISLog table.
Many thanks
Rupa
I am trying to run a Direct Input SQL query to SELECT MAX value of ColA. This query when I run on Query Window runs fine - means it is NOT a NULL. I get a max value.
When I run this query on a SSIS package outputing to a variable - I get the error. -
[Execute SQL Task] Error: An error occurred while assigning a value to variable "MAXROWKEYID": "The type of the value being assigned to variable "User::MAXROWKEYID" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object. ".
I need this output to be used for the subsequent steps which follows this.
I am using Value Type as Double. This was the default when I migrated this DTS package from SQL 2000. I use the proper Single Row for the Result Set and for outputing the Result Set, I use the correct Variable Name.
Help will be greatly appreciated...
Thanks.
SAM.
In SSIS Control Flow, I a have an Execute SQL Task that populates a result set with data.
How can I make that same data accessible to my data flow - so that I can export the data to a flat file?
Thank you