Execute SSIS Package On Vb.net
Mar 11, 2006
Hi All,
I would like to write a small application for execute a SSIS package manually, but i got a error message as following:
Coding:
Dim oPkg As DTS.Package2
oPkg = New DTS.Package2
'Error Message Here
oPkg.LoadFromSQLServer("SQL2005", "sa", "abc", DTS.DTSSQLServerStorageFlags.DTSSQLStgFlag_Default, Nothing, Nothing, Nothing, "AccessImport")
oPkg.Execute()
oPkg.UnInitialize()
oPkg = Nothing
Error Message:
The specified DTS Package ('Name='AccessImport';ID.VersionID = {[not specified]}.{[not specified]}') does not exist.
So what is the problem here?
Thank a lot.
Laputa
View 5 Replies
ADVERTISEMENT
Mar 6, 2008
Hi.
I have a master package, which executes child packages that are located on a SQL Server. The Child packages execute other child packages which are also located on the SQL server.
Everything works fine when I execute in process. But when I set the parameter in the mater package ExecutePackageTask to ExecuteOutOfProcess = True, I get the following error
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "Row Count" (5349).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Custom Split" (6399).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Data Source" (5100).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "DST_SCR Load Data" (6149).
The child packages all run fine when executed directly, and the master package runs fine if Execute Out of Process is False.
Any help would be greatly appreciated.
Thanks
Geoff.
View 7 Replies
View Related
Mar 6, 2008
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
View 5 Replies
View Related
Jul 6, 2006
Dear All,
I now have two SSIS package, "TESTING" and "LOADING". The "TESTING" package have an execute package task that call the "LOADING" package. When I want to execute the TESTING package, how can I setup the connection string so that I can edit the password of the database connected by the "LOADING" package?
Regards,
Strike
View 8 Replies
View Related
Mar 25, 2008
I have successfully created a SSIS package which execute a DTS 2000 package and with no problem to execute the task. But I failed to schedule this package. I was not success in setting the logging. When running the package in command line:
dtexec file "C:Documents and SettingslyangMy DocumentsVisual Studio 2005ProjectsTraingDTSTraingDTSDTSTraining.dtsx"
Error: 2008-03-24 08:03:24.36
Code: 0xC0012024
Source: Execute DTS 2000 Package Task
Description: The task "Execute DTS 2000 Package Task" cannot run on this edit
ion of Integration Services. It requires a higher level edition.
End Error
Warning: 2008-03-24 08:03:24.38
Code: 0x80019002
Source: DTSTraining
Description: The Execution method succeeded, but the number of errors raised
(2) reached the maximum allowed (1); resulting in failure. This occurs when the
number of errors reaches the number specified in MaximumErrorCount. Change the M
aximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Any help will be greatly appreciated.
(32 bit machine, standartd edition of SQL 2005)
View 7 Replies
View Related
Jul 30, 2007
Hi,
Using SSIS, how is it possible to execute another ssis package and pass a parameter to it?
For example, I would like to have a sql code that runs the package say "d:sysapplCEMSSISCSA.dtsx" and pass a parameter of fileName because the CSA.dtsx package requires a filename.
Something like:
execute "d:sysapplCEMSSISCSA.dtsx", varfileName
Thanks
View 3 Replies
View Related
Nov 29, 2007
Hi,
I have created a SSIS package in sql server 2005.
When I execute the package directly it works properly.
The purpose of package is to create a dollar table in sql server destination and import data from sheet of an Excel file which is source.
Now I need to execute this package using vb 6.0 by creating an exe file.
If you have code regarding the same.
Kindly let me know.
Regards,
Srinivas Alwala
View 4 Replies
View Related
Apr 16, 2006
Hi,
I am a newbie to SSIS. I am trying to execute a simple package that I created from my ASP.Net application.
I get the error 'DTSER_FAILURE'. Can anyone help?
Thanks
View 6 Replies
View Related
May 19, 2006
Dear all,
I wrote this post in another category but the answer did not satisfied so that I'd like to know if really anyone has ever used or experienced with this possibility. No by .Net language rather than Vb 6.0 or ASP or even instanciacing DMO library.
Thanks a lot for your support,
View 1 Replies
View Related
Mar 17, 2008
Hello,
I am trying to execute an SSIS package, but i get the following error:
Cannot detach from one or more processes. [3676] The object invoked has disconnected from its clients. Do you want to terminate instead?
Actually it is a fact table and we lookup for the keys from dimension tables. I have to mention that we have many dimensions linked to our fact table.
View 12 Replies
View Related
Jun 26, 2007
Dear Friends,
I have a SSIS project (You can see in my blog) with the main parameters, StartDate and EndDate.
How can I refresh this parameters? Where I save it?
Use a table in database with the fields Startdate and Enddate, and link it to my variables in SSIS?
Use the package configuration of SSIS?
Give me some tips!
regards!
View 4 Replies
View Related
Jun 14, 2006
Hi,
I have created four package, it should executed sequencely one by one. Is it there any option like sequencer in Data Stage for achive this requirement? I want to execute these package one by one using SSIS. could you help on this requirement?
Thanks & Regards
S.Nagarajan
View 5 Replies
View Related
Oct 31, 2006
Hi,
I've an application developed in VB 6.0. Now I had created a SSIS package which is used to import data from an Excel file. This package has a variable "App ID".
Now I need to execute the package from VB application. Also I need to pass the value for the variable "App ID".
Please help me in this regard.
View 21 Replies
View Related
Nov 12, 2006
A developer needs to execute an SSIS package from a stored procedure and I do not want to enable xp_cmdshell on SQL 2005.
One suggestion is to have the application invoke dtexec on the client PC, but this would cause the package to be executed on the client and also requires some SSIS components be installed on each client.
Another idea is to configure a Windows Service to execute dtexec, but I do not know the risks of this approach. Any thoughts?
Thanks, Dave
View 1 Replies
View Related
Dec 9, 2014
Looking for steps to execute the package from CMD ?
View 1 Replies
View Related
Jan 26, 2007
Hello, is it posssible to execute SSIS packages from ASP.NET ? Which code should I Use?
View 4 Replies
View Related
May 24, 2006
I need to execute a SSIS package from a ".vbs" file on a computer that don't have SSIS installed on it.
Thank You
View 3 Replies
View Related
Jun 20, 2006
Hey Folks,
I've got here a strange Problem. If I try to execute the SQL Server Agent Job, that executes my SSIS Package, it fails. The job succeedes when I run the Job as the Proxy, that maps on the User, that has deployed the Package, or when I run the Job under an System Administrator Proxy. Now my Question - how must I set up an Service-Account, which is no Admin and not has deployed the Package?
I already know, that the User has to be in the sysadmin role, and in all msdb SQLAgent*
Thanks and greez
Karsten
View 1 Replies
View Related
Apr 5, 2007
1. I am trying to load data from AS400 DB2 to SQL Database using integration services.
2. I am using microsoft ole DB for Db2 driver to pull data from AS400 and using native SQL driver to load data into MS SQL 2005.
AS400 View to pull this data is---
SELECT UPPER(CHAR(SVSGVL)) AS AccountID, UPPER(CHAR(SVLDES)) AS AccountDesc,
INT(SVSGTP) AS AccountTypeID, INT(SVTR) AS TranslationMethodID, INT(SVDEF) AS AccountValue, INT(SVRM) AS RemeasurementID
FROM V820PRMF.GSVL01
WHERE (UPPER(SVSGMN) = 'ACCT')
ORDER BY AccountID
AccountID String[DT_STR] Lenhth-16
AccountDesc String[DT_STR] Length -30
All other column is int.
MS SQL 2005 is were data to be loaded. Table Info.
CREATE TABLE [dbo].[DimAccount](
[AccountID] [varchar](50) NOT NULL,
[AccountDesc] [varchar](50) NOT NULL,
[AccountTypeID] [int] NOT NULL,
[AccountValueID] [int] NOT NULL,
[TranslationMethodID] [int] NOT NULL,
[RemeasurementMethodID] [int] NOT NULL,
CONSTRAINT [PK_DimAccount_1] PRIMARY KEY CLUSTERED
(
[AccountID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
Integration Package
[Destination - Account [34]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unspecified error".
[Destination - Account [34]] Error: There was an error with input column "ACCOUNTID" (284) on input "Destination Input" (47). The column status returned was: "The value violated the integrity constraints for the column.".
[Destination - Account [34]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "Destination Input" (47)" failed because error code 0xC020907D occurred, and the error row disposition on "input "Destination Input" (47)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Account" (34) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0xC0209029. There may be error messages posted before this with more information on why the thread has exited.
View 7 Replies
View Related
Mar 31, 2008
Hi everybody,
I have the following method and it works well on my development workstation ;
Code Snippet
private DataTable ilaclariGetir(string dataReaderDestination) {
string dtexecArgs;
DtsConnection dtsConnection;
DtsCommand dtsCommand;
IDataReader dataReader;
DtsDataParameter dtsParameter;
DataTable dataTable = new DataTable();
dtexecArgs = @"/FILE ""C:TempEczaTakipProjessisPaketleriPackage.dtsx""";
dtsConnection = new DtsConnection();
{
dtsConnection.ConnectionString = dtexecArgs;
dtsConnection.Open();
}
dtsCommand = new DtsCommand(dtsConnection);
dtsCommand.CommandText = dataReaderDestination;
dataReader = dtsCommand.ExecuteReader(CommandBehavior.Default);
// IDataReader 'ın buradaki gerçekleştirimi diğer dataReader 'lardan farklı. Kayıtlar okunurken son kayıt okunmasına rağmen
// read() metodu bir kez daha true dönüyor ve kayıt sayısı + 1 tane okuma yapılıyor. Yapılan son okuma da istisna fırlatıyor.
try
{
dataTable.Load(dataReader);
}
catch (ApplicationException ae)
{
}
dtsCommand.Dispose();
dataReader.Close();
try
{
dtsConnection.Close();
}
catch (Exception ex)
{
}
return dataTable;
}
However it always fails after I publish the asp.net 2.0 application to our Win 2003 Server. I also copied the configuration and dtsx file to proper location on the server.
I can use dtexec to execute the package without any problem on the same location.
But when called from the application, the package fails to validate.
Is it about a user- permission problem ?
View 9 Replies
View Related
Jul 17, 2006
Dear folks,
I€™ve installed Sql25k Client Components on my own workstation (XP SP2) in order to build ssis packages comfortably against our production server (64 bit on A-P cluster)
I open my Visual Studio .Net 2003 and create a new Windows Application. But when I run the code for to launch a SSIS package fails.
It doesn€™t find the necessarry assemblies. Fine, I understand it. No problem. I copy them from %windir%sql server90assemblies... to C:windowsMicrosoft.NETFramework
After that I€™m going to add new reference from my project but .net complain telling me that these ones are not valid assemblies ¿¿
Assemblies are:
Microsoft.SqlServer.ManagedDTS.dll
Program FilesMicrosoft SQL Server90SDKAssemblies
.NET
Microsoft.SqlServer.DTSRuntimeWrap.dll
Program FilesMicrosoft SQL Server90SDKAssemblies
.NET
Microsoft.SqlServer.DTSPipelineWrap.dll
Program FilesMicrosoft SQL Server90SDKAssemblies
.NET
Let me know where am I failing.
I provide you the snippet of code:
Imports Microsoft.SqlServer.Dts.Runtime
Module Module1
Sub Main()
Dim pkgLocation As String
Dim pkg As New Package
Dim app As New Application
Dim pkgResults As DTSExecResult
pkgLocation = "\srvDESA20056798C$DEVELOPMENT1TEST.dtsx"
pkg = app.LoadPackage(pkgLocation, Nothing)
pkgResults = pkg.Execute()
Console.WriteLine(pkgResults.ToString())
Console.ReadKey()
End Sub
End Module
Thanks in advance and regards,
View 8 Replies
View Related
Feb 26, 2008
Hi..
I have Created an SSIS Package to Backup a database..
I want to execute that SSIS package from a .net application
How can i do this??
View 1 Replies
View Related
Oct 27, 2006
While executing packages in a file from a procedure, I get error:
Error: 2006-10-24 14:58:54.62
Code: 0xC0016016
Source:
Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
End Error
Please let me know how to solve this error.
View 5 Replies
View Related
Feb 7, 2008
I'm new to SSIS so I have not found the answer yet. I have a SSIS package that needs to be run everyday,that loads a basic text file. The only problem is that the text file may not be in the same location everyday so my users will need to locate the path prior to running the package. Is there a way to browse to the text file then have my users execute the package sort of like the old DTS in SQL 2000.
Shanon
View 4 Replies
View Related
Mar 19, 2008
How to execute SSIS package from CMD or using xp_cmdshell?
SSIS package is saved in the folder of the integration services Db.
Thanks in advance.
View 2 Replies
View Related
Mar 20, 2006
Hi all
I am executing a SSIS Package in C# (2005).
Does anybody know how to find out, in case of an error, the
error message?
I am doing the follwoing:
Microsoft.SqlServer.Dts.Runtime.Package local_Package = new Microsoft.SqlServer.Dts.Runtime.Package();
Microsoft.SqlServer.Dts.Runtime.DTSExecResult local_DTSExecResult = new Microsoft.SqlServer.Dts.Runtime.DTSExecResult();
Microsoft.SqlServer.Dts.Runtime.Application local_Application = new Microsoft.SqlServer.Dts.Runtime.Application();
local_Package = local_Application.LoadPackage("c: empssis_package.dtsx", null);
local_DTSExecResult = local_Package.Execute();
if (local_DTSExecResult == Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure)
{
Display MessageBox of the error message ...
}
Thanks for any comment.
Best regards
Frank Uray
View 3 Replies
View Related
May 31, 2007
I have some applications in Access and I execute a DTS from there, Can I execute a SSIS package fron access?
Regards
View 3 Replies
View Related
Mar 24, 2006
What this?
An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80040E14 Description: "Could not bulk load because SSIS file mapping object 'GlobalDTSQLIMPORT ' could not be opened. Operating system error code 2(error not found). Make sure you are accessing a local server via Windows security.".
View 1 Replies
View Related
Jul 3, 2007
I have a SSIS package that I want users to be able to execute by clicking a button on an a web page. The package does not require any parameters to be passed to it. Previously I've executed DTS packages without any problems but after a fair bit of investigation and trawling the net I've not found a way to do this successfully with SSIS. Some code I've tried - Dim app As New Application()
'
' Load package from file system
'
Dim package As Package = app.LoadPackage("c:ssisPackage.dtsx", Nothing)
'package.ImportConfigurationFile("c:ExamplePackage.dtsConfig")
'Dim vars As Variables = package.Variables
'vars("MyVariable").Value = "value from c#"
Dim result As DTSExecResult = package.Execute()
lblResult.Text = "Package Execution results: {0} " & result.ToString()
All I get is a message 'Failure'.
Does anyone have an example of how to do this?
View 10 Replies
View Related
Dec 28, 2014
I am tasked with creating a batch file to execute SSIS packages.
View 3 Replies
View Related
Apr 18, 2008
Hi all
I am running a excel macro from SSIS package, after executing macro I just want to remove the module(Macro code) from Excel file.
can you please tell me how it?
MichaelRaj Arokiyasamy
View 1 Replies
View Related
May 3, 2006
I have this SSIS package which just doesn't seem to run when executing as a sql job and I keep getting this error:
"The command line parameters are invalid. The step failed."
I read some of the comments in forums and they were suggesting to verify the command line for the sql job since there is known bug in the command line for sql job.
But that didn't seem to resolve it and the reason could be one of the variable values that I am trying to set.
In this package one of the variables that I am trying to set is the connection string and my command line looks like this
dtexec /SQL "TestPkg" /SERVER [SVRNAME] /MAXCONCURRENT "-1" /CHECKPOINTING OFF
/SET " package.variables[User::MetaDataConnectionString].Value";"Data Source=[SVRNAME];Initial Catalog=[DBNAME];Integrated Security=True;"
When I try to run this from the command line I get the error as:
Argument " package.variables[User::MetaDataConnectionString].Value;Data Source=[SVRNAME];Initial Catalog=[DBNAME];Integrated Security=True;""
for option "set" is not valid.
I think the issue is in the set parameter where it seems to be intepreting the ;'s in the connection string as part of its command (which I seem to be escaping by putting them in quotes but it seems to be stripping them off)
Has anyone else encountered this issue? Is there any other escape character that I should be using?
Any help will be greatly appreciated.
View 5 Replies
View Related
