Dear Friends,
In the control flow, I have more than one sequence containers, and I have a script component that I want to be executed only when of 2 last sequence finished with sucess... these 2 sequences does not have any relation with each other...
Regards!
I use the 'execute sql task' componentοΌ
||
| sql task1 |
||
| |
____| |_____
| |
|| | |
| Sql task2 | |Sql task3 |
|| | |
When i run the package,i find that 'Sql task3' run after 'Sql task2' finished.
I would like them run at the same time.
Any suggestion?Thanks!
Howdy
If I have serveral queries as shown below:
================================================== ==========
USE XXX
SELECT XX_ZZZZZ, XX_YYY, XX_XXX
FROM ZZZ_ZZZZ_ZZZZ
WHERE QQQQQQQQQQQQQ ='PGL'
USE XXX
SELECT AAA_AAAAA_AAAA,AA_BBB, CC_DDD
FROM SSSS_SSSSS_SSSSS
WHERE FFF_FFFF ='A'
================================================== ===========
Can anyone tell me if the queries execute concurrently or
is it one after the other?
Many thanks,
W.
I've created an SSIS package that contains a Sequence Container with TransactionOption = Required. Within the container, there are a number of Execute Package Task components running in a serial fashion which are responsible for performing "Upserts" to dimension and fact tables on our production server. The destination db configuration is loaded into each of these packages using an XML configuration file. The structure of these "Upsert" packages are nearly identical, while some execute correctly and others fail. Those that fail all provide the same error messages.
These messages appear during Pre-Execute
[Insert new dimension record [1627]] Error: The AcquireConnection method call to the connection manager "DW" failed with error code 0xC0202009.
[DTS.Pipeline] Error: component "Insert new dimension record" (1627) failed the pre-execute phase and returned error code 0xC020801C.
... which are followed by
[Connection manager "DW"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".
[Connection manager "DW"] Error: An OLE DB error has occurred. Error code: 0x8004D00A.
While still in debug mode, I can check the properties of the "DW" connection and successfully test the connection within the packages that fail.
The same packages run successfully when tested outside the container (i.e. no transaction) or when the configuration file is modified to point the "DW" connection to a development version of the db which is running on the same server as the source database.
I have successfully used DTCtester to verify that transactions from source to destination server are working correctly. Also tried setting DelayValidation = True with no change. I have opened a case with Microsoft and am awaiting a reply so I thought I'd throw a post out here to see if anyone else has encountered this and might have a resolution. Here's some more on the environment:
Source Server:
Windows Server 2003 Enterprise Edition SP1
SQL Server 2005 Enterprise Edition SP0
Destination Server:
Windows Server 2003 Enterprise Edition SP1
SQL Server 2000 Enterprise Edition SP3 (clustered)
Thank you in advance for any feedback you might be able to provide.
KS
I have a SSIS package that has several Execute SQL Components. One of the first components reurns a Full Result Set of IDs based on a stored procedure call. The stored procedure can return multiple rows. I store the results to an ADO recordset (object variable) to be used later. I want the component to fail, and the package if the return of the stored procedure is zero records. What is the best way to do this? I had a raise error statement if @@rowcount was zero but this did not fail the component. Any other suggestions?
View 5 Replies View RelatedIn my data flow, I am reading addresses from a CSV file. Then for each row, I would like to execute a process from the command line which outputs the latitude and longitude for the address, parse the output, and add the latitude and longitude into the pipeline. To call the process, I am using a script component transform. Here's my code:
Dim m_Latitude As Double
Dim m_Longitude As Double
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
Dim street As String
Dim city As String
Dim state As String
Dim zip As String
street = Row.address
city = Row.city
state = Row.state
zip = Row.zip
Dim p As Process = New Process()
p.StartInfo.FileName = "C:\GeoCodeDotNet.exe"
p.StartInfo.Arguments = String.Format("""{0}"" ""{1}"" ""{2}"" ""{3}""", street, city, state, zip)
p.StartInfo.WorkingDirectory = "C:\"
p.StartInfo.UseShellExecute = False
p.StartInfo.CreateNoWindow = True
p.StartInfo.RedirectStandardOutput = True
AddHandler p.OutputDataReceived, New DataReceivedEventHandler(AddressOf ConsoleDataReceived)
p.Start()
p.BeginOutputReadLine()
If p.WaitForExit(10 * 1000) Then
Row.Latitude = m_Latitude
Row.Longitude = m_Longitude
Else
p.Kill()
Row.Latitude = 0.0
Row.Longitude = 0.0
End If
End Sub
Private Sub ConsoleDataReceived(ByVal sender As Object, ByVal e As DataReceivedEventArgs)
Dim output As String() = e.Data.Split(New [Char]() {" "c})
m_Latitude = CDbl(output(0))
m_Longitude = CDbl(output(1))
End Sub
I'm just getting very weird behavior. First of all, at the point where I assign values to Row.Latitude and Row.Longitude, m_Latitude and m_Longitude don't always have valid values (e.g. - they are unassigned). Secondly, after attempting to process the first couple rows, it just stops. In my data flow, the script component is yellow, but execution has ended, and the final step of writing to the output CSV file has not even started. Finally, in the directory where my source CSV file is located, I get a SQL dump file with the following content:
05/09/08 08:40:00, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Input parameters: 4 supplied
05/09/08 08:40:00, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ProcessID = 5480
05/09/08 08:40:00, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ThreadId = 0
05/09/08 08:40:00, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Flags = 0x0
05/09/08 08:40:00, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDumpFlags = 0x0
05/09/08 08:40:00, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, SqlInfoPtr = 0x0100C5D0
05/09/08 08:40:00, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, DumpDir = <NULL>
05/09/08 08:40:00, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExceptionRecordPtr = 0x00000000
05/09/08 08:40:00, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ContextPtr = 0x00000000
05/09/08 08:40:00, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExtraFile = <NULL>
05/09/08 08:40:00, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, InstanceName = <NULL>
05/09/08 08:40:00, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ServiceName = <NULL>
05/09/08 08:40:00, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 11 not used
05/09/08 08:40:00, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 15 not used
05/09/08 08:40:00, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 7 not used
05/09/08 08:40:00, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDump completed: C:Program FilesMicrosoft SQL Server90SharedErrorDumpsSQLDmpr0016.mdmp
05/09/08 08:40:00, ACTION, DtsDebugHost.exe, Watson Invoke: No
I'm guessing this all has to do with some kind of threading/concurrency thing and how the data flow pipeline works. Could someone please shed some light on this?
By the way, the script component transform is synchronous.
Much thanks.
Hello, I have been wrestling with a script component and the post execute method. I have obtained some bits of information from the discussions from previous posting - http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=97494&SiteID=1 and have also tried the suggested approaches. Being new to SSIS and .NET as well I am certain that I do not see the entire picture yet.
I have a Read/Write variable that I am assigning a value to. The variable is then processed through a derived column and subsequently used by a flat file.
I have eliminated the following exception thus far.
Error: 0xC0047062 at Data Flow Task, Script Component [518]: Microsoft.SqlServer.Dts.Pipeline.ReadWriteVariablesNotAvailableException: The collection of variables locked for read and write access is not available outside of PostExecute.
But, my flat file does not contain in it the assigned values to the variable. A brief summary of the process follows:
OLE DB SOURCE ===> followed by the Script Component ===> followed by the Derived Columns ===> followed by the flat file.
Sample Script is:
Public Class ScriptMain
Inherits UserComponent
Public NewName As String
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
'
' Add your code here
'
NewName = Row.BPNM
Me.Variables.ShortName = NewName
End Sub
Public Overrides Sub PostExecute()
MsgBox("In first script...")
Me.Variables.ShortName = NewName
MsgBox("variable is " & Me.Variables.ShortName)
End Sub
Question. What am I not doing that prevents me from extracting and passing the respective values to the derived column for each of the rows processed. When I try to assign the value of NewName to the Short Name variable, In red above, I encounter the post execute exception, again.
What code should I have in place to insure that I am not trying to reference the variable on a PostExecute within the normal process of the script component? Any guidance would be immensly appreciated.
Help Please!!
Hello,
I have a package that has a data lfow task. this task imports data from a db2 database (using the IBM Ole DB provider fro db2) and adds it to sql server database table. This package was created on the server. then though version control (using TFS source control) I check out the package on my local machine. and when I open the package I get the foll 3 errors.
Error 1 Validation error. Import Account Num from BMGP_BDR: DTS.Pipeline: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Error 2 Error loading BMAG Download Xref Tables - bmag.dtsx: Microsoft.SqlServer.Dts.Pipeline.ComponentVersionMismatchException: The version of component "DataReader Source" (1113) is not compatible with this version of the DataFlow. [[The version or pipeline version or both for the specified component is higher than the current version. This package was probably created on a new version of DTS or the component than is installed on the current PC.]] at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostCheckAndPerformUpgrade(IDTSManagedComponentWrapper90 wrapper, Int32 lPipelineVersion)
Error 3 Error loading BMAG Download Xref Tables - bmag.dtsx: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Please advice.
Thank you.
Hi,
I have a package which reads an Access file from a folder. My connection manager to this file is .NET providers for OledbMicrosoft Jet 4.0 OLE DB Provider.
Package works from my computer. But when I execute it on the server as a SQL Agent job, I get
The component metadata for "component "DataReader Source" (1) could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
I copied the mdb file to a folder on the server which my packages have no problem reading data from.
My packages run under the same domain account as defined in proxies.
Appreciate a help.
Gulden
I have this on my page
Dim backUpDB2 As SqlClient.SqlCommand
backUpDB2 = New SqlClient.SqlCommand
backUpDB2.CommandType = CommandType.StoredProcedure
backUpDB2.CommandText = "msdb.dbo.SP_RESUMENFAC"
backUpDB2.Connection = SqlConnection1
backUpDB2.ExecuteNonQuery()
The SP has this
CREATE PROCEDURE .[SP_RESUMENFAC] AS
EXEC sp_start_job @job_name = 'TransferirDatos(FACT) '
GO
WHen I execute the page after the SP it fills some datagrid but the data is not updated bacuase the job takes 1 minute or more to finish.
Is there anyway to prevent to show the old data? or to detect when the job has finished?
Thanks
I am trying to create a SQL Job which will report on another job which hasn't finished within its normal completion time. I schedule the new job late enough after the first job that the first should have finished by then.
I would like to have just queried msdb..sysjobhistory.run_status. However, this seems to only report on job STEP status - and after the step is finished! It is always showing run status = 1 (Complete).
Does anyone know the base meta-data table and column I could query? Enterprise Manager shows the current status as running and I want to know where it gets that.
If it is still running, I will raise an error to notify our support group, etc.
PS: My job steps include a combination of DTSRun commands and TSQL commands. I don't think the flavour of commands should matter...
Thanks.
Hi,
I'm a MS Access developer who needs to help someone migrate/convert from a 'finished' SQL application to Access. How do I gain access to the SQL backend so I can examine/export the raw data? For example, in Access, I would hold down the Shift key while opening the program and it would give me editing rights to the database.
Please be very specific because I have zero experience with SQL.
Thanks,
David
Currently we have a process where 4 files are ftp'd down to our server. We have DTS package which tests for the existence of these files and once these exist, the DTS package loads the data from these files into a SQL database. Sometimes, however, though the files exist they haven't finished being downloaded so that when the DTS package tries to process them the package is saying the files are empty (though they're not).
Thanks for any help.
My ssis package errors out because one of the database connection failed. I successfully logged error but also indicated that package finished successfully. My confusion is if a sheduling software schedules this package, what would be return code sent by dtexe... . would it be success or failure? In this scnerio i want it to return failure so that appropriate team can be contacted.
thanks,
kushpaw
I have a SSIS package which process 12699 files in a folder. After about 20 minutes it looks like the loading is finished (the record count of database table doesn't change any more) and I believe it's finished, but if I check the Progress tab, it's still showing the file name being processed and still moving. So my first question is: is it still loading files or it's just that the progress message is behind?
Then I click on stop debugging, after a while it stopped but then it's frozen, nothing responds no matter what I click. I haven't saved the package yet so I don't want to close it out. Should I just wait? And what is the problem?
Thanks a lot for your help in advance!!
p.s. I'm exploring SSIS and will convert our current DTS packages to SSIS so you'll see me post more and more questions down the road.
I have a job I want to run everyday but before this job starts and I want to check and see if another job has completed before I start this job. i would like to do this in the job steps in SSMS. step 1 is job 'xxxxxxx' running if no go to step 2 if yes exit
View 3 Replies View Related
Hi All,
I have a solution which is synchronised with visualsourcesafe. Now there are some reports present in the solution, I am able to view the preview of the reports but when I am going to view the dataset definition It is not able to retain its defintion and its becoming blank but this happens to only datasets which were developed from cube and its able to retain dataset which are developed from Database.
Any help would be of great use.
Thanks in advance
Regards
Hi,
I want to generate a new snapshot using stored procedures. I want to wait for the snapshot files to be created and then execute a stored procedure. What's the best way to determine that the snapshot has completed successfully? I thought of doing something like:
exec msdb.dbo.sp_help_job
@job_name = @job_name
@job_aspect = 'job',
@execution_status = 1
however I can't put the results of that proc into a temp table because I get this error:
Msg 8164, Level 16, State 1, Procedure sp_get_composite_job_info, Line 72
An INSERT EXEC statement cannot be nested.
Any ideas? I'd like a T-SQL solution.
Thanks,
Mark.
Hi everyone! Good day!
I'm not really sure if my question should fall on Service Broker or T-SQL, but I hope someone helps me with this... After activating the stored procedure assigned to the queue, is there any way for me to find out if the stored procedure is already finished executing?
I have successfully sent messages to my queue but I have no way to know if all the processing is already done.
Thanks so much!
I am working with a stored procedure that needs to roll up a week number column once a week - columns are numbered 1-10, 1 being this week, 2 being last week and so forth
Once a week the 10th column is deleted, the 9th becomes 10, the 8th becomes the 9th and so forth and the 1st is calculated the week numbers are getting all screwed up - and we think it's because one statement starts before the one before it completes the statements go like this:
delete theTable where week_num=10;
update theTable set weeknum=10 where weeknum=9;
update theTable set weeknum=9 where weeknum=8;
and so forth
is that the reason? is there any way not to start one statement until the one before it finishes?
Dear All
Please I need an urgent help
After i finished all Transaction Log Shipping Configuration.
I tried to use the database in the secondary database but i couldn't access it
i saw it in SQL Managment Studio as (Restoring......)
i tired to make a database snapshot from it , i had a message
Msg 1822, Level 16, State 1, Line 1
The database must be online to have a database snapshot.
Please urgently
Hello,
We are running Windows Server 2003 SP 1 and trying to upgrade SQL 2000 SP 4 to SQL 2005 using the command line.
The process finishes in under ten minutes. Summary.txt file we have this information:
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup_<ServerName>_SQL.log
Last Action : ValidateUpgrade
Error String : The installer has encountered an unexpected error. The error code is 2259. Database: Table(s) Update failed
Error Number : 2259
In the log file named SQLSetup_ServerName_Core.log I found the following:
Error: Action "LaunchLocalBootstrapAction" threw an exception during execution. Error information reported during run:
"C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe" finished and returned: 1627
Aborting queue processing as nested installer has completed
Message pump returning: 1627
After receiving this info, I can navigate to the setup.bat for the SQL 2005 upgrade and complete the upgrade without error. We are planning on 500 of these, so manual updates is a very ugly concept.
I'd appreciate any and all ideas on where to go from here.
Most Sincerely.
We've recently upgraded to SQL Server 2014, and are now using SSIS integrated with Visual Studio. We have a SSIS project which contains about 20 packages which are nested in Sequence Containers and executed concurrently. These packages have been set up as project references.
The problem is that when I press the start button to run the packages, they all light up green reporting completion before the data has finished loading into the SQL database. If I press the stop button without waiting a sufficient length of time, then not all of the data gets loaded. i.e. a certain number of rows will be missing from some of the SQL tables.
If I click through to the individual package items and check the data flow progress while running, some of the data flows appear to hang at a certain number of rows without ever reaching completion. The number of rows indicated in the data flow is incorrect - i.e. it will count up to ~150,000 and stay there indefinitely in the running state, when in actual fact there are ~500,000 rows to load.
To clarify, the main package will show all items green and display the "Finished: Success" message in the log window, however when I drill through to certain packages in the set, they'll be stuck in the yellow running state, with no way of knowing whether they've actually completed or not.
My current workaround is to just wait a certain length of time before pressing the stop button. This bug doesn't seem to inhibit rows being loaded - it just incorrectly identifies the point when the load finishes, causing people to terminate the load prematurely.
This issue only occurs if I run the project from the main package container. If I execute the child packages individually, they correctly report the number of rows being loaded and light up green once complete.
In a Data Flow, I have the necessity to use a SSIS variable of type Object? inside Script Component and assign to it the content of 'n' variables of string type.
On exiting from the script the variable of type object should contain something like in the following lines:
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
BBBBBBBBBBBBBBBBBBBBBBBBBBBBB
CCCCCCCCCCCCCCCCCCCCCCCCCCCCC
DDDDDDDDDDDDDDDDDDDDDDDDDDDDD
¦¦¦¦¦¦¦.
¦¦¦¦¦¦¦.
On exiting from the data flow I will use the variable of type Object in a Script Task, by reading each element in a cyclic fashion.
Is there anyone who have experienced something like this? Could anyone provide any example of that?
Thanks in advance!
Hi all
I'm into a project which uses a lot of views for joining 2 or more tables. Using the MERGE component in SSIS will be a huge effort coz it only has 2 inputs and I gotta SORT the input too.
Isnt it possible to have a VIEW like component that joins more than 2 tables and DOESNT need sorting??
(I've thought about creating views in database engine but it breaks my data floe in SSIS and is'nt a practical solution)
I am writing a custom dataflow transformation component and I need to get the name of the preceeding component.
I have been trying to find a way to get a reference to the Package object, MainPipe object or IDTSPath90 object (connecting to the IDTSInput90 of my component) from my component because I think from there I can get to the information I want.
Does anyone have any suggestions?
TIA . . . Ed
No idea where this bug crept in from. Have been using SSIS for 1.5 years now without hitting this problem.
I had a script component opening an XML document and parsing it using XPATH. I added some code that uses StreamReader / Streamwriter (closing one stream before starting the other). The code works without issue in my C# app.
And it ran without issue 2-3 times in SSIS. Then suddenly after running my package again, the script component says it completes successfully, yet nothing happens. I set a breakpoint on the first line of code - it never hits it. I add a msgbox as the first line of code - and it never displays.
I then close my package / exit out of ssis ... and then re-open it. When i open my script component, all of my code is GONE. All references that I added are gone.
I tried adding the streamreader/writer process to a dll I created from my c# app ... and added the DLL to the package -- same result.
I can reproduce this on 2 different computers.
Anyone experience this problem ? Any idea how to stop it ? Or debug it ?
Here is a slimmed down code sample of what causes the error :
Public Class ScriptMain
Public Sub Main()
Try
Dim xmlDoc As New XmlDocument
xmlDoc.Load("c:ulkasync_86281519_20070628045850225_4.xml")
MsgBox("xmlLoaded") --this doesn't display once the package starts "acting up"
Catch ex As Exception
MsgBox(ex.Message)
UpdateXML("c:ulkasync_86281519_20070628045850225_4.xml", ex.Message)
End Try
Dts.TaskResult = Dts.Results.Success
End Sub
Private Sub UpdateXML(ByVal fileName As String, ByVal message As String)
Try
Dim invalidChar As String = message.Trim().Substring(message.Trim().IndexOf("0x"), 4)
Dim rd As StreamReader = New StreamReader(fileName)
Dim xml As String = rd.ReadToEnd()
Xml = Xml.Replace(invalidChar, String.Empty)
xml = xml.Replace("", String.Empty)
xml = xml.Replace("<![CDATA[<![CDATA[", "<![CDATA[")
xml = xml.Replace("]]>]]>", "]]>")
MsgBox("replaced")
rd.Close()
Dim wr As StreamWriter = New StreamWriter(fileName)
wr.Write(xml)
wr.Close()
Dim xdoc As XmlDocument = New XmlDocument()
xdoc.Load(fileName)
Catch ex As Exception
UpdateXML(fileName, ex.Message)
End Try
End Sub
End Class
I have a BOM table with all finished item receipes and semi items recipes. create a query where semi item materials are also listed in finished item recipe.
View 5 Replies View RelatedDear all:
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
Many thanks,
Tomorrow
I'm looking for a way to refer to a package variable within any
Transact-SQL code included in either an Execute SQL or Execute T-SQL
task. If this can be done, I need to know the technique to use -
whether it's something similar to a parameter placeholder question
mark or something else.
FYI - I've been able to successfully execute Transact-SQL statements
within the Execute SQL task, so I don't think the Execute T-SQL task
is even necessary for this purpose.
Hi.
I have a master package, which executes child packages that are located on a SQL Server. The Child packages execute other child packages which are also located on the SQL server.
Everything works fine when I execute in process. But when I set the parameter in the mater package ExecutePackageTask to ExecuteOutOfProcess = True, I get the following error
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "Row Count" (5349).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Custom Split" (6399).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Data Source" (5100).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "DST_SCR Load Data" (6149).
The child packages all run fine when executed directly, and the master package runs fine if Execute Out of Process is False.
Any help would be greatly appreciated.
Thanks
Geoff.
I have a SSIS package contains an "Execute SQL Task". The SQL will raise error or succeed. However, it sounds the package won't pick up the raised error?
Or is it possible to conditional run other control flow items according the the status of SQL task execution?
Hi,
How can I generate a sequence No. using a simple SELECT statement.
like
declare @key
set @key = 1
SELECT @key, e.name from Employee
Now I want to display name of the employee and Key value which should get incremented automatically for each employee..
Is there any way?
Please help me..