I have a sql server resultset that returns productid numbers. I would like to loop thru this resultset and run a stored procedure using the productid as the input parameter. Any samples would be helpful. thanks
View 3 RepliesHi,I would like to write a stored procedure that returns a resultset.e.g. select student_id, student_subject, subject_marksfrom student_resultswhere student_class_no = ?The input parameter is student_class_no (see ? as per above SQL).The output is a resultset, with each result consisting of student_id,student_subject, subject_marks.Can anyone advise how this is done in sql server stored procedure?Thanks,June Moore.
View 1 Replies View RelatedI am try to execute a stored procedure via HTML using an XML template. The last statement in the procedure is a select stmt with FOR XML specified which will provide the output back to the calling program.
The problem is, the stored procedure I am calling in turn calls other procedures, which may also provide result sets.
So, I get this error message back
<?MSSQLError HResult="0x80004005" Source="Microsoft XML Extensions to SQL Server" Description="Streaming not supported over multiple column result" ?>
I would really like a way to suppress all the resultsets produced during the execution of the procedure except the last one. Is there a way to do that within a procedure?
Hello,
I have a stored procedur like this:
--------------------------------------------
ALTER PROCEDURE dbo.pdpd_DynamicCall
@SQLString varchar(4096) = null
AS
create TABLE #T1
( column_1 varchar(10) ,
column_2 varchar(100) )
insert into #T1
execute ('execute ' + @SQLString )
select * from #T1
--------------------------------------------
The problem is that I want to call different procedures that can give back different columns.
Therefor I would have to define the table #T1 generically.But I don't know how.
Can anyone help me on this problem?
thank you
Werner
I have 2 stored procedures:
the 1st uses the second sp. to fill a parameter.
the 2nd has one output parameter defined.
When I run the 2nd sp. on its own in MS SQL Server Manangement studio, there is no resultset shown.
BUT when the 2nd sp. is executed inside the 1st sp., I get a '3' in the resultset everytime the 2nd sp. executes. What is causing this?????
This is the way I execute the 2nd sp. inside the 1st sp.:
select 'TEST1'
execute dbo.uspMonthlyHeadCount @soe, @eoe, @Months, @count output
select 'TEST2'
Results are like this:
TEST1
3
TEST2
... (it's displayed more times because the sp. is inside a while)
Why is this happening and what can I do about it? (I'll provide more info if needed!)
I have a store procedure (e.g. sp_FetchOpenItems) in which I would like to call an existing stored procedure (e.g. sp_FetchAnalysts). The stored proc, sp_FetchAnalysts returns a resultset of all analysts in the system.
I would like to call sp_FetchAnalysts from within sp_FetchOpenItems and insert the resultset from sp_FetchAnalysts into a local temporary table. Is this possible?
Thanks,
Kevin
I have two SQL Server stored procedures, PROC1 and PROC2. PROC1 hasabout 50 input parameters. PROC2 is the main procedure that does somedata modifications and afterwards calls PROC1 using an EXECUTEstatement.The input parameter values for PROC1 are stored in a table in mydatabase. What I like to do is passing those values to PROC1 using aSELECT statement. Currently, all 50 parameters are read and stored ina variable, and afterwards they are passed to PROC1 using:EXEC spPROC1 @var1, @var2, @var3, ... , @var50Since it is a lot of code declaring and assigning 50 variables, I waswondering if there is a possibility to run a statement like:EXEC spPROC1 (SELECT * FROM myTable WHERE id = 2)Any help on this is greatly appreciated!
View 1 Replies View RelatedI'm working on building a report and asked a developer which table some data comes from in an application. His answer was the name of a 3500 line stored procedure that returns 2 result sets. I could accomplish what I'm trying to do using the second result set, but I'm not sure how to put that into a temporary table so that I could use it.
Here's my plan according to the Kübler-Ross software development lifecycle:
Denial - Ask the developer to make sure this is correct (done)
Despair - Look hopelessly for a solution (where I am now)
Anger - Chastise developer
Bargaining - See if I can get him to at least swap the order that the resultsets are returned
Acceptance - Tell the users that this can't be done at present.
Hi All,
I have created a dynamic SQL STATEMENT , but the result of the execution of that statement matters to me. within stored procedure.
Note: If run the statement using EXEC() command, the result gets displayed on the SQL Editor.
But I DO NOT KNOW HOW to Capture that value.
Any idea how to capture as I would like capture the result and stored it in a table.
Thank you.
--Israr
I got some xml that is essentially an html table that I need to turn into a standard table resultset from a stored proc. If you take this xml and save it as html that is the desired resultset I am looking for. I realize the <td> tags repeat so I would just prefer 'col' + positional index for the col name. Keep in mind that <td> could be is 1 to n.
<table>
<tr>
<td>cell1</td>
<td>cell2</td>
<td>cell3</td>
[Code] .....
This is my attempt but I can't figure out how to get separate cols
declare @GridData xml = '<table><tr><td>cell1</td><td>cell2</td><td>cell3</td></tr><tr><td>cell4</td><td>cell5</td><td>cell6</td></tr><tr><td>cell7</td><td>cell8</td><td>cell8</td></tr></table>'
select T.C.value('.', 'nvarchar(max)')
from @GridData.nodes('//tr') T(C)
I have on stored procedure which returns mote than one resultset i want that to store in two different temp table how can achieve this in SQL server.
Following is the stored procedure and table that i need to create.
create procedure GetData as begin select * from Empselect * from Deptend
create table #tmp1 (Ddeptid int, deptname varchar(500),Location varchar(100))
Insert into #tmp1 (Ddeptid , deptname ,Location )
exec GetData
create table #tmp (empid int , ename varchar(500),DeptId int , salary int)
Insert into #tmp (empId,ename,deptId,salary)
exec GetData
Hi
I have written a stored procedure that returns 8 tables.
When I try to design a server report based on this stored procedure, reporting services only recognises the first table and not the other 7 tables.
I am using SQL Server 2005 and Visual Studio 2005.
Thank you in advance
Jav
Hi all,
I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.
Whenever I tried to right click stored procedure and select step into store procedure> i get following error
"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"
I am not sure what needs to be done on sql server side
We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.
Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?
Please advise..
Thank You
hi all,
in my execute sql task, i have a try catch statement to catch error code if there's an error...
begin try
insert into person.contact (contactid)
values ('1')
end try
begin catch
select @@error as ErrorCode
end catch
this ErrorCode will be mapped to a user variable.
my problem is the value for ResultSet.
in order to assign ErrorCode to the variable, i have to set the ResultSet value to Single row, but if this task does not fail, i need to set ResultSet value to None in order for it to run successfully.
How do i go about solving this problem?
Please help. thanks!
I am calling a stored procedure (say X) and from that stored procedure (i mean X) i want to call another stored procedure (say Y)asynchoronoulsy. Once stored procedure X is completed then i want to return execution to main program. In background, Stored procedure Y will contiue his work. Please let me know how to do that using SQL Server 2000 and ASP.NET 2.
View 3 Replies View RelatedHello,
I am hoping there is a solution within SQL that work for this instead of making round trips from the front end. I have a stored procedure that is called from the front-end(USP_DistinctBalancePoolByCompanyCurrency) that accepts two parameters and returns one column of data possibly several rows. I have a second stored procedure(USP_BalanceDateByAccountPool) that accepts the previous stored procedures return values. What I would like to do is call the first stored procedure from the front end and return the results from the second stored procedure. Since it's likely I will have more than row of data, can I loop the second passing each value returned from the first?
The Stored Procs are:
CREATE PROCEDURE USP_DistinctBalancePoolByCompanyCurrency
@CID int,
@CY char(3)
AS
SELECT Distinct S.BalancePoolName
FROM SiteRef S
INNER JOIN Account A ON A.PoolId=S.ID
Inner JOIN AccountBalance AB ON A.Id = AB.AccountId
Inner JOIN AccountPool AP On AP.Id=A.PoolId
Where A.CompanyId=@CID And AB.Currency=@CY
CREATE PROCEDURE USP_BalanceDateByAccountPool
@PoolName varchar(50)
AS
Declare @DT datetime
Select @DT=
(Select MAX(AccountBalance.DateX) From Company Company
INNER JOIN Account Account ON Company.Id = Account.CompanyId
INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID
Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId
WHERE SiteRef.BalancePoolName = @PoolName)
SELECT SiteRef.BalancePoolName, AccountBalance.DateX, AccountBalance.Balance
FROM Company Company
INNER JOIN Account Account ON Company.Id = Account.CompanyId
INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID
Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId
WHERE SiteRef.BalancePoolName = @PoolName And AccountBalance.DateX = @DT
Order By AccountBalance.DateX DESC
Any assistance would be greatly appreciated.
Thank you,
Dave
Hello! I would like to write a value from a column to a parameter in SSIS with the Execute SQL task. The problem is that I will never get a value for the parameter.
You can recreate the problem with the AdventureWorksDW sample database.
1. Drop an execute SQL task in the control flow
2. Set the connection to the AdventureWorksDw database
3. Write this in the SQL Statement box Select Max(FullDateAlterNateKey) as LastDate
From DimTime
4. Set the resultset to single Row
5. Under result set assign LastDate as the Result Name and create a parameter with a default date.
6. Execute the task, that will finish succesfully but the value of the parameter in 5 have not changed.
I have tried to change the scope to both the package level and the task level without any success. The value of the variable is still the default value. I have also tried a string variable without sucess.
Any ideas?
Kind Regards
Thomas Ivarsson
Hi,
Can anybody please tell me if it is possible to execute an url from stored procedure.
thanks in advance,
preeth
Hello:
I have created a stored procedure that will backup and restore a database.
I would like to be able to execute this sp using public rights - any ideas?
Thanks
How can I use in stored procedure the faction ‘’in’’ to select values, using execute and the values must not be specified before in the stored procedure
View 6 Replies View RelatedHow do you execute a stored procedure in MS SQL Server?I can design and execute them from MS Access dev front end, but cannot seemto find how to run them in the Enterprise Manager.TIA.~ Duane Phillips.
View 2 Replies View RelatedI have setup a user which has execute rights on a stored procedure. The sp is owned by dbo. The user can execute the stored procedure, but it fails, because the stored procedure calls other tables and procedures that the user does not have rights to. Is there a way to allow those procedures to execute without allowing access to everything else for the user I setup? Thanks!
View 3 Replies View RelatedI need to disable and move orphaned computer objects in my Active Directory. The SQL Agent has permission to do this. I have created a stored procedure for the task with intentions of executing it with sp_start_job. However, I cannot execute it in SQL 2005. How can I grant permission to this (login) to execute sp_start_job? This is all run from a web page and NOT the Query Window.
View 1 Replies View RelatedPlease anyone help me with my question
How do I execute a stored Procedure using SSIS ?
I have a stored procedure in SQL SERVER 2005 database that I need to execute using a SSIS package using Execute SQL Task from Toolbox in Visual studio 2005
Thanks,
George
Hi,
I am strugling to execute a insert stored procedure on a button click. The stored procedure is taking values from a temp table and inserting them into a identical table. The procedure is expecting 1 value from a Query string, the stored procedure works as expected when hard coded.
Im completely new to this and have no idea where to begin, i have been looking through the forums for several hours and am still none the wiser.
please can someone point me in the right direction
hi to all,
i have a stored procedure and i want to run a program from it..
i think that i need use api functions but how can i do that..
if there is a nother ways please tell me..
thanx..
I have a button in a form that I want to execute a simple stored procedure to insert a single value into a database table. The Stored Procedure is:=================CREATE PROCEDURE bplog_insert_invoice_detail (@invo_Id Int) ASINSERT INTO Invoice_Detail (Invo_Id) VALUES(@Invo_Id)GO=================How do i pass the value from and text field (@invo_id) and execute the stored procedure when a button is clicked.Regards.
View 1 Replies View RelatedHello,I was wondering if it is possible to dynamically execute a stored procedure; for example, in SQL, you can do:insert into Table1( id, name)select id, namefrom Table2Can you do something like:exec spProc @id = id, @name = namefrom Table1Or something like that? I know I can select a row at a time and execute, or write a program, but I was looking to see if there was an easier way.Thanks.
View 1 Replies View RelatedHello, I'm having trouble trying to execute a simple stored procedure. Could someone please take a look at this and let me know where I went wrong.
Dim cn As SqlConnection = New SqlConnection("Data Source=localhost;Initial Catalog=TEST;Persist Security Info=True;User ID=sa;Password=test")
Dim cmd As SqlCommand = cn.CreateCommand
cn.Open()
cmd.CommandText = "cssp_family"
cmd.CommandType = CommandType.StoredProcedure
cmd.ExecuteNonQuery()
cn.closed
Within a stored procedure, is it possible to call multiple other stored procedures asychronously? For example, I'd like to execute both local and remote stored procedures, but don't want/need to wait for the output while the original stored procedure continues to execute each subsequent command.
View 1 Replies View RelatedWhen I run the code microsoft give to launch a DTS package from a stored procedure, the procedure runs continuously, never ending.
When I run the DTS package manually, or from a dtsrun utility, it only takes seconds.
I'm trying to automate this package so it will run after a field in a table has been updated.
Any suggestions are more than welcome.
PS. Here's the code I've been using (that doesn't seem to work):
--- Declare Variables
Declare @hr int
Declare @oPkg int
--- Create Package Object
Exec @hr = sp_OACreate 'DTS.Package', @oPkg OUT
If @hr <> 0
Begin
Print '*** Create Package Object Failed'
Exec sp_oageterrorinfo @oPkg, @hr
Return
End
--- Load Package
---DTSSQLStorageFlags :
---DTSSQLFlag_Default = 0
---DTSSQLStgFlag_UseTrustedConnection = 256
Exec @hr = sp_OAMEthod @oPkg,'LoadFromSqlServer("JENNSERVER", "", "", 256, , , , "RunMS")',null
If @hr <> 0
Begin
Print '*** Load Package Failed'
Exec sp_oageterrorinfo @oPkg, @hr
Return
End
--- Execute Package
Exec @hr = sp_OAMethod @oPkg, 'Execute'
If @hr <> 0
Begin
Print '*** Execute Failed'
Exec sp_oageterrorinfo @oPkg, @hr
Return
End
--- Clean Up Package
Exec @hr = sp_oadestroy @oPkg
If @hr <> 0
Begin
Print '*** Destroy Package Failed'
Exec sp_oageterrorinfo @oPkg, @hr
Return
End
Is it possible to create a stored procedure to run a custom dos command (eg. c:ProgramName param1 param2)?
Thanks,
Ben
Hi, hoping someone may be able to shed some light on this.
I have a stored procedure that conditionally executes different DTS Packages. Everything seems to work, there's no errors at all, but the DTS Packages are never executed. Wondering if anyone has any ideas.
Here's the stored procedure....
CREATE PROCEDURE exportLists
AS
DECLARE @script VARCHAR(8000)
DECLARE @id INT
DECLARE @max INT
select regionid,count(distinct homephone) as phone
into #phone
from tbl_template
Where exportid is null
group by regionid
select officeid,listpath
into #office
from tbl_office
WHERE startdate <= GETDATE()
AND (enddate >= GETDATE() OR enddate IS NULL)
and listpath is not null
and listpath <> ''
Select case when phone > 2500 then '"exportLists" /A MDBFile="' + listpath + '" /A OfficeID ="' + convert(varchar(10),officeid) + '" '
Else '"resetTemplate" /A OfficeID="' + convert(varchar(10),officeid) + '" '
end as cmd
,Identity(int,1,1) as rowno
,phone
into #temp
from #office as O
inner Join #phone as p
on o.officeid=p.regionid
Set @max=@@rowcount
set @id = 1
While @id <=@max
Begin
Select @script='"Dtsrun /S "' + @@SERVERNAME + '" /E /N ' + cmd
+ case when phone > 2500
then '/A ExportID="' + convert(varchar(10),(Select coalesce(Max(listid),0) + 1 from tbl_sf3Lists)) + '" '
else ' ' end
, @id=@id+1
from #temp
Where rowno = @id
End
Return
GO