Execute Package Results Different To Step By Step Execution - Uses Raw File
Jan 31, 2007
I have a package that has multiple data flow tasks. At the end of a task, key data is written into a raw file (file name stored in a variable) that is used as a data source for the next task. Each task requires a success from the preceding task.
Here's the rub:
If I execute the entire package, the results of the package (number of records of certain tasks) differs significantly from when I execute each step in the package in turn (many more records e.g. 5 vs 350).
I get the feeling that the Raw file is read into memory before it is flushed by the previous task, or that the next task begins preparation tasks too early.
Any help is greatly appreciated.
I am running on Server 2003 64 (although the same thing happens when deployed on a Server 2003 32 machine)
Thanks
B.
View 2 Replies
ADVERTISEMENT
Jun 18, 2012
I want to convert .rdlΒ to .rdc need full steps.Actually i created .rdl report using sp sucessfully.Now i want to convert it to rdlc while doing it iam getting some authentication error and some thing else.I created rdl in 2008 and i want to change it to rdlc 2010.
View 5 Replies
View Related
Jun 18, 2002
This is a bug that I submitted to Microsoft. I wanted to see if anyone could assist me with a work-around.
1. Create a new DTS Package
2. Add an ActiveX Task and change 'Main = DTSTaskExecResult_Success' to 'Main = DTSTaskExecResult_Failure'.
3. Running this package will result in a Failed package.
4. Save Package as 'Failure' to local server
5. Create another new DTS Package.
6. Add an 'Execute Package' task, and configure the properties to have it launch the saved 'Failure' child package.
7. Add an ActiveX task and then click ok to close it.
8. Select the Execute Package task (which executes the failure package), hold control and click the ActiveX task. Add an 'On Success' Precendence constraint from the 'Workflow' menu.
9. Now execute the package. Notice that the ActiveX task will execute even though the Execute Package task FAILED.
10. If you change the Precendence constraint from 'On Success' to 'On Failure' the ActiveX task will not run, because the package thinks that the Execute Package task completed with success.
In summary... if a child package, executed by an Execute Package task fails, the Execute Package Task ALWAYS "reports" success to the following precedence constraint and the package continues to run. Even if 'Fail Package on first error' is enabled. Although you will see that the task actually failed while watching the status of the package execution.
I am currently trying to write vbscript in an ActiveX task that will follow an Execute Package Task. I am trying to make the vbscript check and see if the previous task really did succeed or fail, and then make the ActiveX task succeed or fail as required to make the precedence constraints work properly.
I have replicated this problem on many different machines.
---------------------------------------------------------------------------
Any ideas for my ActiveX task? I am trying to access the StepExecutionResult from the Execute Package task, and I have been unable to. If I can get the Step Execution reult, then I can in turn cause the ActiveX task to suceed or fail, based on the execution result of the Execute Package task.
Thank you for your time,
David Zebrowitz
dzebrowitz@apartners.com
View 1 Replies
View Related
May 3, 2006
I have this SSIS package which just doesn't seem to run when executing as a sql job and I keep getting this error:
"The command line parameters are invalid. The step failed."
I read some of the comments in forums and they were suggesting to verify the command line for the sql job since there is known bug in the command line for sql job.
But that didn't seem to resolve it and the reason could be one of the variable values that I am trying to set.
In this package one of the variables that I am trying to set is the connection string and my command line looks like this
dtexec /SQL "TestPkg" /SERVER [SVRNAME] /MAXCONCURRENT "-1" /CHECKPOINTING OFF
/SET " package.variables[User::MetaDataConnectionString].Value";"Data Source=[SVRNAME];Initial Catalog=[DBNAME];Integrated Security=True;"
When I try to run this from the command line I get the error as:
Argument " package.variables[User::MetaDataConnectionString].Value;Data Source=[SVRNAME];Initial Catalog=[DBNAME];Integrated Security=True;""
for option "set" is not valid.
I think the issue is in the set parameter where it seems to be intepreting the ;'s in the connection string as part of its command (which I seem to be escaping by putting them in quotes but it seems to be stripping them off)
Has anyone else encountered this issue? Is there any other escape character that I should be using?
Any help will be greatly appreciated.
View 5 Replies
View Related
Mar 17, 2007
Hi all,
I am new to SQL Server 2005 (but many years in SQL Server and .NET), and I am sort of having everything figured out for my company. However, one thing that still bothering me is that:
In the old Server 2000, you can execute a single step in a DTS package by right click the step and then click execute step.
In the new server 2005, I can only execute the whole package from the Management Tool and Edit the pack from VS 2005. Is there also a way for me to execute a single step in a SSIS package?
This is important for us, many thanks!
View 11 Replies
View Related
Nov 15, 2007
I would like to create a log of what happens with each step in the package, at least start & start time and email that at the end of the package
Is this possible?
Thanks
JPS
View 3 Replies
View Related
Jan 18, 2008
Hi All,
Please let me know where can i find the sample files and rs2005sbsDW database in msdn library as i dont have CD provided along with the book.
Please give me the link of the sample files so that i can download it for testing the sample application.
Regards,
Prabhanjana
View 1 Replies
View Related
Oct 13, 2006
is there such a paper? if so, can you pls point me to it? thx in advance
View 4 Replies
View Related
Oct 3, 2007
hye everyone,
after finished do the report and deploy at IIS/report manager in local pc..
i want to know , what is the step /how to deploy the report project at the user's pc/ client pc /other server..
thanks in advance
thank you very much
View 16 Replies
View Related
Mar 2, 2008
Hi!
I hope the answer is as simple as the question -- but after reading all the documentation I could find (understand?) and a lot of posts here, I'm no closer to achieving the goal.
I have a Visual C# app, DAYTRACKER, developed in VS2005. It uses a database with several tables constructed using SQL Server 2005 Developer Edition.
I want to deploy the app plus the database plus SQL Express to another machine, to be used by a single user (the administrator) with no need for network connectivity of any kind.
What I have so far is:
1. The application is successfully deployed from a CD-ROM, having used the Publish process within VS2005, and opens on the new machine -- without database connectivity, however.
2. SQL Express is successfully deployed (it deployed as a 'prerequisite' when I went through the Publish process in VS2005)
3. I manually copied the database's .mdf and .mdl files, using SQL Server Managers 'Copy Database' function, then transferred the copies to the new machine into the ..MSSQL.1MSSQLdata folder (where they appear along with the master.mdg, mastlog.ldf etc files)
Now, the DAYTRACKER application's DAYTRACKERConnectionString under 'Settings' in the VS2005 studio reads 'Data Source=DELL3;Initial Catalog=DayTracker;Integrated Security=True' (which are the appropriate parameters for the machine, DELL3, on which I wrote the program.)
The problem, of course, is that SQL Express on the new machine doesn't connect the application to the database. When I go to the 'SQL Server Configuration Manager' and go to the 'SQL Server 2005 Services' and double-click on the 'SQL Server (SQLEXPRESS)' icon (the service is running) and the user is logged on using 'Local System Account'. Under the 'Service' tab the Host Name is 'MUSIC' (which is the name of the new machine I've installed the app onto -- which of course is not the name - DELL3 - that the app's connection string is expecting). Under the 'Advanced' tab, I've tried correcting the name of the Startup Parameters default .mdf and .mdl entries to ..DayTracker.mdf and ..DayTracker_log.mdl, but the server won't start up after I make the changes.
What I'm hoping for: a step-by-step way of doing this type of deployment, preferable getting it all onto one CD-ROM, and installing it on the new machine so that it all works seamlessly from the start, not requiring any 'tweaking' of the SQLServer Express settings by the end-user.
But I'll take pretty much anything that fixes the specific db connectivity problem I've described.
Thank you very much.
John F.
View 11 Replies
View Related
Sep 23, 2014
I have created a Test SSIS Package within BIDS (VS 2K8, v 9.0.30729.4462 QFE; .NET v 3.5 SP1) that connects to our Test Listener.
There is only 1 Connection Manager Object, and OLE DB Provider for SQL Server.
The ConnectionString lists: Provider=SQLOLEDB.1;Integrated Security=SSPI
The Test Connection within BIDS works.
The Package Control Flow has just 1 Object, and Execute SQL Task that performs an Exec on an SP that contains only a Select (Read).
The Package runs within BIDS.
I've placed this Package within a Job on the Primary Node. Ive run the job successfully using 32 bit runtime on and off. The location of the file on the server happens to be on a share that resides on what is currently the Secondary Node.
When I try to run the exact copy of this Job on the Secondary Node (Which has been Set up for Read All Connections; Yes), I get an error, regardless of the 32 bit runtime opiton. At this point, the location of the file is on the Secondary Node.
The Error is: "Login failed for user 'OurDomainAgent_Account'".
The Agent is a member of NT ServiceSQLServerAgent on both instances, and that account is a member of SysAdmin. Adding the Agent account as well, and giving that account SysAdmin, makes no difference either.
Why can't I get this to work?
View 1 Replies
View Related
Feb 2, 2006
when i right click and execute the package from the Management Studio, it runs fine, everytime. When i schedule a job to execute it, it fails, everytime.
"The package execution failed. The step failed."
i have made sure that the package and job ran using credentials with more than enough access to everything. Still, with no luck. PLEASE! I am at my wits ends here, and the boss is getting antsey...
Any and all help is greatly appreciated...
Anthony
View 13 Replies
View Related
May 19, 2008
Hi,
I have to transport a big database table and can't read it at once with "select * from table" because the table is bigger than my system memory.
Is there a way to read the table step by step? I thought it was possible with ADO and his serverside cursors but I don't now how. I need an "universal" solution that works on SQL Server 2000/2005, MySQL and Oracle.
Regards,
harry
View 2 Replies
View Related
Dec 5, 2007
Connecting to a networked SQL Server Box from my local machine
Open Query Analyzer from Start menu, logging in using sa account.
from the object browser i select my stored procedure (WEA_InsertClaim) - right click and select Debug.
i am prompted to enter the parameter values, which i do, auto rollback checkbox is checked - click Execute.
T-SQL Debugger opens and runs through the stored procedure.
but only buttons enabled are the "Go", "Toggle Breakpoint", "Clear All Breakpoints"
so i can set breakpoints etc. but when i select Go it will not stop at the breakpoints it just runs through the stored procedure from start to finish. giving the correct return code as its output
is there something i need to enable in order to make it stop at breakpoints??
Cheers,
Craig
View 3 Replies
View Related
Mar 2, 2008
Hi pals,
I have stored procedure which creates job with 3 job steps whichruns 3 SSIS packages in a sequence.
But i dont know why it is skipping the 2nd step and executing the 3rd step.
I can clearly observe it in the logs.
And if comment the 3rd step and re-run the job, now it is executing the 1st and 2nd step in a sequence.
I can see the log for 2nd package also.
Again i uncommented the code for calling the 3rd step which loads data into Oracle tables.
This time again it is skipping the 2nd step.
I dont know the reason why it is happening so.
It is really frustrating me a lot.
IS there any precedence/ priority given while loading data into Oracle database?
Job steps
First step loads data from staging database to ODS
Second step loads data from ODS to DataMart
Third step loads data from DataMart to Oracle Tables
Can anyone please help me out.
I have tried all options.
Here is my stored procedure.
Is anything wrong in the below stored procedure.
CREATE PROCEDURE [dbo].[spExecDTSPackage]
as
declare @jid uniqueidentifier
declare @cmd1 varchar(4000)
declare @cmd2 varchar(4000)
declare @cmd3 varchar(4000)
SET @cmd1 = '"C:Program FilesMicrosoft SQL Server90DTSBinnDTExec.exe" /F "D:RepositoryPackage1.dtsx" '
SET @cmd2 = '"C:Program FilesMicrosoft SQL Server90DTSBinnDTExec.exe" /F "D:RepositoryPackage2.dtsx" '
SET @cmd3 = '"C:Program FilesMicrosoft SQL Server90DTSBinnDTExec.exe" /F "D:RepositoryPackage3.dtsx" '
declare @jname varchar(128)
set @jname = cast(newid() as char(36))
exec msdb.dbo.sp_add_job
@job_name = @jname,
@enabled = 1,
@delete_level = 1,
@job_id = @jid OUTPUT
exec msdb.dbo.sp_add_jobserver
@job_id = @jid,
@server_name = '(local)'
exec msdb.dbo.sp_add_jobstep
@job_id = @jid,
@step_name = N'step1',
@step_id = 1,
@on_success_action=4,
@on_success_step_id=2,
@subsystem = N'CMDEXEC',
@proxy_name = N'Proxyname',
@command = @cmd1,
@on_fail_action = 2 -- quit with failure
exec msdb.dbo.sp_add_jobstep
@job_id = @jid,
@step_name = N'step2',
@step_id = 2,
@on_success_action=4,
@on_success_step_id=3,
@subsystem = N'CMDEXEC',
@proxy_name = N'Proxyname',
@command = @cmd2
exec msdb.dbo.sp_add_jobstep
@job_id = @jid,
@step_name = N'CoreD_To_Oracle',
@step_id = 3,
@on_success_action=1,
@on_success_step_id=0,
@subsystem = N'CMDEXEC',
@proxy_name = N'Proxyname',
@command = @cmd3
-- Start job
exec msdb.dbo.sp_start_job
@job_id = @jid,
@step_name = N'step1'
I have also tried out with an simple example , a job with 3 steps which basically inserts 3 recs into a table.
Here is the code and this one is executing fine.
USE [msdb]
GO
BEGIN TRANSACTION
DECLARE @ReturnCode INT
SELECT @ReturnCode = 0
DECLARE @jobId BINARY(16)
EXEC @ReturnCode = msdb.dbo.sp_add_job @job_name=N'2D4474C9-2B4F-45C2-8640-EB8DE30A5276',
@enabled=1,
@notify_level_eventlog=2,
@notify_level_email=0,
@notify_level_netsend=0,
@notify_level_page=0,
@delete_level=1,
@description=N'No description available.',
@category_name=N'SRM',
@owner_login_name=N'sa',
@job_id = @jobId OUTPUT
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
EXEC @ReturnCode = msdb.dbo.sp_add_jobstep @job_id=@jobId, @step_name=N'Step_1',
@step_id=1,
@cmdexec_success_code=0,
@on_success_action=4,
@on_success_step_id=2,
@on_fail_action=2,
@on_fail_step_id=0,
@retry_attempts=0,
@retry_interval=0,
@os_run_priority=0,
@subsystem=N'TSQL',
@command=N'use ods
go
insert into test select 1,''ram''
go',
@database_name=N'master',
@flags=0
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
EXEC @ReturnCode = msdb.dbo.sp_add_jobstep @job_id=@jobId, @step_name=N'Step_2',
@step_id=2,
@cmdexec_success_code=0,
@on_success_action=4,
@on_success_step_id=3,
@on_fail_action=2,
@on_fail_step_id=0,
@retry_attempts=0,
@retry_interval=0,
@os_run_priority=0,
@subsystem=N'TSQL',
@command=N'use ods
go
insert into test select 2, ''ganesh''
go',
@database_name=N'master',
@flags=0
IF (@@ERROR <> 0 OR @ReturnCode <> 0)
GOTO QuitWithRollback
EXEC @ReturnCode = msdb.dbo.sp_add_jobstep @job_id=@jobId,
@step_name=N'Step_3',
@step_id=3,
@cmdexec_success_code=0,
@on_success_action=1,
@on_success_step_id=0,
@on_fail_action=2,
@on_fail_step_id=0,
@retry_attempts=0,
@retry_interval=0,
@os_run_priority=0,
@subsystem=N'TSQL',
@command=N'use ods
go
insert into test select 3,''Vinod''
go',
@database_name=N'master',
@flags=0
IF (@@ERROR <> 0 OR @ReturnCode <> 0)
GOTO QuitWithRollback
EXEC @ReturnCode = msdb.dbo.sp_update_job @job_id = @jobId,
@start_step_id = 1
IF (@@ERROR <> 0 OR @ReturnCode <> 0)
GOTO QuitWithRollback
EXEC @ReturnCode = msdb.dbo.sp_add_jobserver @job_id = @jobId, @server_name = N'(local)'
IF (@@ERROR <> 0 OR @ReturnCode <> 0)
GOTO QuitWithRollback
COMMIT TRANSACTION
GOTO EndSave
QuitWithRollback:
IF (@@TRANCOUNT > 0) ROLLBACK TRANSACTION
EndSave:
I dont know why the stored procedure is not working as expected.
Any thoughts?
Welch can you please help on this regard?
View 12 Replies
View Related
Jul 17, 2007
hi,
i am currently in the process of moving a bunch of jobs into SSIS from another ETL tool. I would like to benchmark the two products against each other by comparing how long each step of an ETL process would take.
I see no way to do this in SSIS, there is the Progress tab but it doesnt list start/time and end/time. Plus I having loops and things which I want to know how long each iteration takes.
Is there a way to track all this?
Thanks
View 5 Replies
View Related
Feb 15, 2006
Is there a good step by step guide to setting up an indirect configuration? I've followed the steps in Kirk Haselden's 'Keep your packages in the dark' article 3 or 4 times this afternoon and nothing seems to work. I cannot even get the XML configuration file to work by accessing it directly. I'm using the wizard to create the file.
Just wondering if there was something else out there....
Thanks in advance for any help.
MarkA
View 3 Replies
View Related
Oct 25, 2006
Have 10 pkgs in an SSIS solution. All share a common data source but none of the pkgs call each other. I store everything on the hard drive. I build the solution and it builds all the 10 pkgs and places the 10 pkgs in the bin folder.
When I call a pkg from a job step, do I just want to point to the pkg in the bin folder. It works either way, calling the pkg in the bin and non-bin folder. Im thinking I should call the one in the bin folder. Or should I be calling the pkg somehow with the syntax - MySSISsolution.Pkg3?
View 1 Replies
View Related
Jul 20, 2005
hii got a query that takes about 14 minshere it isselect BDProduct.ProductCode,BDProduct.ProductName,SALTer ritory.TerritoryID,SALTerritory.TerritoryName,SALAccount.AccountID,S ALAccount.AccountName,sum(SalesNetFact.Qty2) as Quantity,sum(SalesNetFact.bonus) as Bonusfrom SalesNetFactinner join BDProducton BDProduct.ProductID=SalesNetFact.ProductIDinner join SALAccounton SALAccount.AccountID=SalesNetFact.AccountIDand SALAccount.BranchID=SalesNetFact.branchidinner join SALTerritoryon dbo.SALAccount.TerritoryID = dbo.SALTerritory.TerritoryIDand dbo.SALAccount.BranchID = dbo.SALTerritory.BranchIDgroup by BDProduct.ProductCode,BDProduct.ProductName,SALTerritory.TerritoryID,SALTerritory.TerritoryNa me,SALAccount.AccountID,SALAccount.AccountNamethe SalesNetFact table has BranchID,TransactionLineID as primary keythe BDProduct table has ProductID as primary keythe SALAccount table has AccountID,BranchID as primary keythe SALTerritory table has TerritoryID,BranchID as primary keyi have no other indices in any of these tablesthe execution plan shows that the sort step takes 96% cost,that is themost expensive step,it is done after all the joining steps and beforethe group by stepfor the sort step:the estimated row count is 1552242,the argumentsare:ORDER BY [BDProduct].[ProductCode]asc,[SALTerritory].[TerritoryID] asc,[SALTerritory].[TerritoryName]asc,[SalesNetFact].[AccountID] asc,[SALAccount].[AccountID] asc)any ideas about how to improve this sort step
View 1 Replies
View Related
Mar 12, 2008
Hi
I posted this on the sql server security forums too. Here is the error that i get when i change the type of the step to ssis
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
Additional information:
An exception occured while executing a Transact-SQL statement or batch.
(Microsoft.SqlServer.ConnectionInfo)
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction.(Microsoft SQL Server, Error: 3930)
This error pops up right after i change the type of the step to "SQL Server Intergration Services Package"
I have made the following configurations:
The user group (windows group) that the user belongs has the following roles in msdb :
db_dtsadmin
db_dtsltuser
db_dtsoperator
SQLAgentOperatorRole
SQLAgentReaderRole
SQLAgentUserRole
i have made a proxy to sql server agent which has the following subsystems :
"SQL Server Integration Services Provider" the proxy is tied to the same login which has those SQLagent and dts roles in msdb database.
Im using windows authentication and the user that logs into the sql server is in the same group that i have set all of the rights.
Ps. Clearly im missing some role or right somewhere because as soon as i give the group sysadmin role then all the users in that group can create SSIS steps in the agent.
Ps. Ps. I have been living under the impression that i dont have to give sysadmin rights to people that create ssis packages and schedule then with the agent.
View 3 Replies
View Related
Aug 13, 2001
I have a DTS package that I want to execute from within a sql 7.0 scheduled task step. I tried the following and got the following error on the DTS step:
Operating System Task:
dtsrun /S 'Server1' /E /N'REFRESH'
Error Thrown:
DTSRun: Loading... Error: -2147008507 (80074005); Provider Error: 0 (0) Error string: Unspecified error Error source: Microsoft Data Transformation Services (DTS) Package Help file: sqldts.hlp Help context: 713 Error: -2147467259 (80004005); Provider Error: 11 (B) Error string: [DBMSSOCN]General network error.
Can someone help me with the syntax? Suggestions?
View 1 Replies
View Related
Oct 3, 2001
Hi, All
Since I install SQL 7 SP3 twice, in EM/DTS/local packages, open any pacakage, right click one of the step, one of the drop down item 'execute step' was missing. Does anyone know how to bring it back?
Thank you in advance!
Theresa
View 1 Replies
View Related
Oct 12, 2007
Dear all hi,
I would like to create a job in my database to be occurring once a day. This job runs a dts package for transfer data in some tables that we have in other kind of database(Access). The Dts package first delete the rows and then insert the new rows.
I have defined the relationships in my database. I want the job to be
Step 1: run the d:sqlscriptsDrop_relation.sql
Step 2:execute dts package
Step 1: run the d:sqlscriptscreate_relation_w_2006.sql
I couldnt find a command like sp_execute d:sqlscriptsDrop_relation.sql a command that i can run an in query analyzer. Has anyone any suggestions?
Best Regards,
Hellen
View 2 Replies
View Related
Apr 26, 2007
I am trying to learn Reporting Services using the title "MS SQL Server 2005 Reporting Services Step by Step" by Stacia Misner and Hitachi Consulting, published in 2006. I am experiencing problems with some of the exercises. I got as far as Chapter 4 when I followed directions to create a SQL statement to define a query string for a dataset. Pg 80:
select * from vProductProfitability
where year = 2003 and
MonthNumberOfYear = 1
The view vProductProfitability does not exist in the tutorial database that came with the book, rs2005sbsDW. The result of this query is the basis for the entire chapter on developing basic reports and I'm being denied a learning opportunity because the view does not exist. In short, I'm stuck.
I have tried to find somewhere at Microsoft to place this question and get some answers so I can continue thru the tutorial. To no avail. Does anyone have any suggestions?
BTW, the solution that came in the CD is also wrong because the query noted above is also in the solution.
This humble grasshopper seeks wisdom.
Respectfully Submitted,
Dave Matthews
Atlanta, GA
aka FlooseMan Dave
View 17 Replies
View Related
Jun 13, 2006
Is it possible to skip all steps following the script task results (Step 1) in a For Each container. I am iterating thru all the files in a For Each container and parsing a few lines of the file and based on the result I want to force the For Each loop to get to the next file instead of executing the next steps. Is it possible to force the for each loop to get the to the next file if the test criteria in the very first step (Script Task) fails. Any inputs will be much appreciated.
THanks,
MShah
View 1 Replies
View Related
Dec 27, 2007
I have a package that used to work fine, but after I imported it into a different existing solution and tried to run it, it always stalls during the data flow task at the very end.
It will run through and process all the rows and insert them into the destination except for the last chunk. The task blocks eventually all turn green as well, but then it never proceeds to the next task after the data flow. Looking at the Progress tab for the data flow task, I get the following:
Progress: Pre-Execute - 100 percent complete
[DTS.Pipeline] Information: Execute phase is beginning.
[DTS.Pipeline] Information: Post Execute phase is beginning.
Progress: Post Execute - 0 percent complete
Then it just stays at 0 percent for Post Execute. The program doesn't hang or anything, it just doesn't progress at all. I also just checked and I run the package from its original solution and it is now exhibiting the same behavior as well.
Any ideas what might be causing this or something to do to try and figure it out or at least get more information about what might be causing it?
Thanks.
View 13 Replies
View Related
Aug 22, 2002
I trying to right some custom error handeling activex controls inside a DTS Package. The only problem is i need the specific name of the step that it is checking. The easiest way I found was to save the package to Meta Data Services and then look at the properties. The only problem with that is it doesnt specify what is what. its more or less a guess. and if the package is huge or has been through multiple revisions, it makes it even harder. anyone that could lend an hand? i though for sure i might be able to pull it from one of the sys tables in msdb, but there isnt anything for the individual steps, only the packages. Thanks in advance.
Late,
Matt
View 3 Replies
View Related
Apr 11, 2008
I am getting an error when I try to create a Step in a SQL Agent Job and select the Type "SQL Server Integration Services Package". As soon as I select this type in the drop down box, I get the error message:
The specified module could not be found. (Exception from HRESULT: 0x8007007E) (SqlManagerUI)
It then takes me back to the Step window, but I do not get the option to select packages.
I was able to do this in the past, and I do have jobs set up to run packages, so this may be something related to "permissions" or recent upgrades. I am a sysadmin on the SQL Server, but I have limited rights on the Windows server (I'm not a Network admin). OR, could this be related to recent service packs or windows upgrades?
Any help appreciated.
View 18 Replies
View Related
Sep 13, 2007
Dear Experts,
please guide me for replcation.....
i'm using sql server 2005 server tools developer edition. my OS is professional 2000.
and i've sqlserver 2000 client tools also
i've two databases in my machine. publisher is in different instance, and the transactions might be maximum 50 per day. my aim is when ever developer enters the data into the main database, automatically it should be updated on the my two databases also.
i mean the server is sysA and the database is srtp.
my machine is sys20 and the databases are srtp1, srtp2.
how should i make sysA as publisher?
i've right click on the server databases, but it is showing newsubscriptions option only.
Vinod
Even you learn 1%, Learn it with 100% confidence.
View 8 Replies
View Related
Aug 3, 2007
Am I correct in thinking that I need to place a dummy script component which does nothing in order to route logic depending on the value of a variable?
ie. I want to output to a file if a Parent variable is a certain value, or i want to load a table if its a different value.
View 1 Replies
View Related
Mar 28, 2007
I've deployed an ssis package to the database server through the manifest file over the network..
The package runs great when testing through vs.net on my client.
I've added the package to a job step in the sql server job agent.
When I test the new job, the package step fails, but there is no error or log information in the job history.
Wwhere can I get error information? And/or How can make SSIS error information more verbose in the job history?
Thanks for any help or information.
View 6 Replies
View Related
Aug 5, 2005
I have a Job Step defined to execute a SSIS Package. This SSIS package contains a Script Task. The Job fails with the message "Package execution failed. The step failed."
View 23 Replies
View Related
Feb 4, 2007
Visual C# 2005 Step by Step John Sharp
Intel D975XBX 930 2GB ram HD 300GB - MatroxVD
Windows XP Sp2 + updates
Visual Studio 2005 Professional edition
SQL Sever 2005 Standard Edition
20070203
Install Practice Files at D:Program FilesMicrosoft PressVisual C Sharp Step by Step.
Configuring SQL Sever Express Edition
Hostname - xxxxxxxxx..
At sqlcmd s xxxxx...SQLExpress E got - Pipes error.
Open Microsoft SQL Sever 2005 - Configuration Tools SQL Configuration Manager select Protcols for SQLEXPRESS select Named Pipes enable close.
At sqlcmd s xxxxx..SQLExpress E get Sqlcmd: : Unknown Option. Enter -? for help.
Chdir C:Documents and SettingsAll UsersStart MenuProgramsMicrosoft Server 2005
Sqlcmd s xxxxxx..SqlExpress E
Hresult 0x2, Lvel 16, State 1
Named Pipes Provider: Couldnot open a connection to SQL Server [2].
Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections..
Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired.
How do I fix this?
Need to be able to to use the Northwind Traders data base
Thanks
View 1 Replies
View Related
