Execute Parameterized Select Statement From Data Flow
Aug 25, 2006
I have following requirement. From OLE-DB source I am getting IDS. Then lookup with some master data. Now I have only matching IDs. Now I need find some filed(say Frequency from some table for each above id). I already write stored procedure for same where I am passing ID as parameter.Which is working fine when I run it SQL server management studio.
Query is sort of
Select field1,fiel2... from table 1 where id = @id
@id is each ID from lookup
Now I want to call this stored procedure in Data flow. I tried it using OLE DB command but it did not return output of stored procudre. I am getting output same what ever I am passing input.
Is there way to do this? In short my requirement is execute parametrized select statement using data flow trasformation component.
View 8 Replies
ADVERTISEMENT
May 8, 2008
hi in my package, some sql operations need the special user name and admin privilage. so how do i create my ssis package so that when it executes it takes the given username and password from the table in some database.
View 8 Replies
View Related
Dec 30, 2006
I'm trying to use a parameterized SELECT statement, but I must not have it right - the code below gives this compile error: System.Data.SqlClient.SqlException: Must declare the scalar variable "@UserID".
string strUserID = (string)Session["UserID"];
string strSelectRatings = "SELECT [CommentID], [GameID], [UserID], [Rating], LEFT(Comment,40) as Comment FROM [Comments] WHERE [UserID] = @UserID";
SqlConnection myConnection = new SqlConnection("...");
SqlCommand myCommand = new SqlCommand(strSelectRatings, myConnection);
myCommand.Parameters.Add("@UserID", strUserID);
MySqlDataSource.SelectCommand = strSelectRatings;
GridView1.DataBind();
View 1 Replies
View Related
Dec 17, 2007
Hello,
I have been reading about how you shouldn't build dynamic SQL statements (see TextBox1.Text in line 3) and should use parameters instead, but I haven't yet found how to create a SELECT statement with a parameter that fills a dataset. If anyone can show me the correct way of doing this I would appreciate it so I can add it to my code snippets for proper coding practices. Thanks in advance for any assistance.
string strConnectionString = ConfigurationManager.ConnectionStrings["sqlConnectionString"].ConnectionString;
SqlConnection myConnection = new SqlConnection(strConnectionString);
-> string sqlSelect = "select * from customers where city = " + "'" + TextBox1.Text + "'";
SqlDataAdapter da = new SqlDataAdapter(sqlSelect, myConnection);
DataSet ds = new DataSet();
myConnection.Open();
da.Fill(ds, "myDataset");
myConnection.Close();
jcfrasco
View 1 Replies
View Related
Jul 30, 2007
I'm trying to create an interface for filtering profiles from an SQLServer 2005 database using an html form. The form allows filtering based on a minimum level required in between one and four different columns. The first (and only mandatory) column to be filtered on has its name hard-coded into the base query. In trying to get the other three possible criteria to work, I've taken several approaches, all of which failed.The other three potential criteria are selected from a drop down menu on the form and ideally these choices are passed into a query to be used as column names. My first attempt looked like this: query = "SELECT * FROM profiles_tbl WHERE (EngSkill >= @english)" .... if ReqSkill1 <> "" then level1 = Convert.ToInt32(Request.form("minskilllvl1")) query = query & pickclmleft & ReqSkill1 & pickclmright1 cmd.Parameters.Add("@ReqSkill1", SqlDBtype.text) cmd.Parameters("@ReqSkill1").value = ReqSkill1 cmd.Parameters.Add("@level1", SqlDBtype.int) cmd.Parameters("@level1").value = level1 end if above If statement was repeated for 2nd and 3rd optionsSecond approach was to remove all parameters from sections of the query that were appended onto the original statement. This involved lots of strings containing AND clauses with hard-coded column names which were appended on when the corresponding option was selected in the form. Code looked like this: query = "SELECT * FROM profiles_tbl WHERE (EngSkill >= @english)" ASPqry = " AND (ASPlevel >= " try con = new SqlConnection() con.ConnectionString = “**************string was correct****************� cmd = new SqlCommand() cmd.Parameters.Add("@english", SqlDBtype.int) cmd.Parameters("@english").value = english if ReqSkill1 <> "" then if ReqSkill1 = "ASPlevel" then query = query + " AND (ASPlevel >= " level1 = Convert.ToInt32(Request.form("minskilllvl1")) if level1 = 0 then query = query + "0)" end if if level1 = 1 then query = query + "1)" end if if level1 = 2 then query = query + "2)" end if if level1 = 3 then query = query + "3)" end if end if end ifFinally when this too failed, I created four entirely separate queries, detected how many criteria were used, and used the appropriate query, passing necessary skill level in as a parameter. I'll provide code if needed here. Queries were written as strings and then used to set the CommandText property for an SqlCommand variable. I think it's important to note that in all cases the most basic version of the query worked. In the first, if only the first criteria was used the statement executed fine. Same in the second. In the third, whatever query could be assigned first (even though only one could be assigned because of logical structure of if statements) worked and none of the others would. This last case was tested even with completely hard-coded queries that SQL Server 2005 validated as correct and would run. Any help is greatly appreciated. Will post as much code as people want/need, and if I can get any one of these methods working I'll be thrilled. I have no need for all three. A.S. Moser
View 4 Replies
View Related
Jan 12, 2006
I'm currently setting variables at the package level with an ExecuteSQL task. This works fine. However, I'm now starting to think about restartability midway through a package. It would be nice to have the variable(s) needed in a data flow set within the data flow so that I only have to restart that task.
Is there a way to do that using an SQL statement as the source of the value in a data flow?
OR, when using checkpoints will it save variable settings so that they are available when the package is restarted? This would make my issue a moot point.
View 2 Replies
View Related
May 18, 2008
SSIS Newbie Question:
I have a simple Control Flow setup that checks to see if a particular table exists. If the table does not exists, the table is created in an alternate path, if it does exist, the table is truncated before moving to a file import Data Flow that uses an OLE DB Destination to output the imported data.
My problem is, that I get OLE DB package errors if the table the OLE DB Destination Container references does not exist when I load the package.
How can I over come this issue? I need to be able to dynamically create the table in an earlier step, then use that table to import data into in a later step in the workflow.
Is there a switch I can use to turn off checking in the OLE DB Destination Container so that it will allow me to hook up the table creation step?
Seems like this would be a common task...
Steps:
1. Execute SQL Task to see if the required table exists
2. Use expresions to test a variable to check the results of step 1
3. If table exists, truncate the table and reload it from file in Data Flow using OLE DB Destination
4. If table does not exist, 1st create it, then follow the normal Data Flow
Can someone help me with this?
Signed: Clueless with a deadline approaching...
View 3 Replies
View Related
Mar 13, 2007
Hi Everyone,
In the data flow task, i have thosands of rows flowing, now just before inserting these rows into a table, i want to delete some rows in the destination table. For this, if i use the oledb command, then it will run several times. I think a script can do it but I want to avoid it because it would be an inefficient affair.
Please post your suggestions on this.
Regards,
Manu
View 13 Replies
View Related
Dec 27, 2007
I have a package that used to work fine, but after I imported it into a different existing solution and tried to run it, it always stalls during the data flow task at the very end.
It will run through and process all the rows and insert them into the destination except for the last chunk. The task blocks eventually all turn green as well, but then it never proceeds to the next task after the data flow. Looking at the Progress tab for the data flow task, I get the following:
Progress: Pre-Execute - 100 percent complete
[DTS.Pipeline] Information: Execute phase is beginning.
[DTS.Pipeline] Information: Post Execute phase is beginning.
Progress: Post Execute - 0 percent complete
Then it just stays at 0 percent for Post Execute. The program doesn't hang or anything, it just doesn't progress at all. I also just checked and I run the package from its original solution and it is now exhibiting the same behavior as well.
Any ideas what might be causing this or something to do to try and figure it out or at least get more information about what might be causing it?
Thanks.
View 13 Replies
View Related
Dec 5, 2006
I have a fuzzy lookup in a data flow but this data flow never gets pass pre-execute phase. What is the problem?
Thanks
View 2 Replies
View Related
Jun 20, 2006
Hi. I am trying to extract the data returned from a store procedure to a flat file. However, it fail to execute this package in the OLE DB Source.
I select the SQL Command in the Data Access Mode, then use:
USE [SecurityMaster]
EXEC [dbo].[smf_ListEquity]
It runs ok in the Preview, but not in the Run. Then the system returns during executing the package:
Error: 0xC02092B4 at Load TickerList, OLE DB Source [510]: A rowset based on the SQL command was not returned by the OLE DB provider.
Error: 0xC004701A at Load TickerList, DTS.Pipeline: component "OLE DB Source" (510) failed the pre-execute phase and returned error code 0xC02092B4.
Please give me some helps. Thanks.
View 13 Replies
View Related
Dec 4, 2006
I would like to put a select statement inside this execute statement
use [AnalysisReport]
GO
GRANT EXECUTE ON (select statement) TO [test]
GO
anyone?
View 5 Replies
View Related
Mar 20, 2014
I am a junior dba not a developer. So I'm just trying to get use to write code in T-SQL.
Anyways, I have a table which is dba.dbhakyedek.
Columns are
dbname, username, class_desc, object_name, permission_name, state_desc
I have statement
select case
when class_desc='OBJECT_OR_COLUMN' then 'GRANT '+permission_name+' ON '+'['+left(object_name,3)+'].'+'['+substring(object_name,5,len(object_name))+ '] TO '+username
WHEN class_desc='DATABASE_ROLE' THEN EXEC sp_addrolemember N'object_name', N'MC'
end
from dba.dbhakyedek
where username='MC'
This statement was running successfully until exec sp_addrolemember thing. I just learned that i can't call a sp in select case but i couldnt figure out how to do it.
View 6 Replies
View Related
Jul 2, 2015
Is it possible to do? I'm getting lock violations in I try to execute several tasks in parallel.
View 4 Replies
View Related
Nov 27, 2006
Hi you all,
In abc.aspx, I use a GridView and a SqlDataSource with a SelectCommand. The GridView's DataSourceID is the SqlDataSource.
In abc.aspx.cs, I would like to use an IF statement in which if a criterion is not satistied then I will use the SqlDataSource with another SelectCommand string. Unfortunately, I have yet to know how to write code lines in order to do that with the SqlDataSource. Plz help me out!
View 1 Replies
View Related
Feb 21, 2008
All,
I execute dynamic SQL with a return parameter like this:
SET @lSqlStr = ' SELECT @oRsltCount = COUNT(*) FROM foo';
EXECUTE sp_executesql @lSqlStr, N'@oRsltCount int out' @oRsltCount out;
The sp_executesql @stmt parameter is type nVarChar. Occationally, the size of @lSqlStr may be greater than 4000 bytes, which exceed the maximum allowable size of type nVarchar.
So, I may execute dynamic SQL like this:
EXECUTE ( @lSqlStr );
where the type of the argument is VarChar(MAX), and size of @lSqlStr may be up to 2^31 -- but cannot parameterize (or bind, if you will) the query result.
How can I execute dynamic query with string size greater than 4k bytes AND bind the query result?
-Kevin
View 9 Replies
View Related
May 11, 2007
Using SSIS to import from Excel to SQL Server.
In Excel they are showing Sale as -ve quantity and purchase as +ve quantity.
The database has quantity always as +ve figure and a separate column "isPurchase" set to true or false depending on whether purchase or sale.
So I need Derived Column to return a bolean (or int) depending whether quantity is positive or negative. I tried each of the following in the Expression but all of them were invalid expressions.
CASE WHEN [TotalQuantity] > 0 THEN 0 ELSE 1 END
If [TotalQuantity] > 0 THEN 1 ELSE 0 END
IIF ([TotalQuantity] > 0, 1,0)
Can anyone help me with correct syntax, or correct Data Flow Transformation if Derived column is wrong.
Thanks
Richard
View 3 Replies
View Related
Apr 24, 2007
The SQL computed is complex enough that I can't see a way to make it a parameterized query. The obvious approach seems to be to compute the SQL in a CONTROL FLOW SCRIPT TASK and then use it to load a variable to set the VARIABLE SOURCE of a CONTROL FLOW EXECUTE SQL TASK.
I see that I can return a resultset to a variable.
But getting the rows of the results into a dataflow is not obvious. I have heard mentione that a Derived Column can do this. I can see using a dummy SCRIPT COMPONENT as DATA SOURCE with nothing in it to then drop into DERIVED COLUMN. But when setting up DERIVED COLUMN I don't see how to pull the columns out of the RESULTSET variable.
If it makes a difference I think the columns of the resultset will always be the same in this scenario.
Maybe this is totally the wrong approach? Any clues would be appreciated.
View 1 Replies
View Related
May 31, 2007
Hi,
My name is Iram Levinger.
I'm trying to build ssis package that select rows from SQL Server table and
according to Conditional Split cube results I should execute oracle stored
procedure with in and out parameters.
The in parameters should come from the SQL select and the output parameters
should be inline parameter that I should declare on in the OleDB Command
selecet statement.
Here is the sql statement I wrote in the OleDB Command:
declare @out_return_status as int
declare @out_return_msg as varchar (1000)
begin
exec clickace.cns_clk_sst_iw_pkg.update_instal_warranty_dates ?,?,?,?,?,
@out_return_status,@out_return_msg
end
When I click on the Refresh button in the ssis GUI I get the following error:
An OLE DB error has occured. Error Code : 0x80040E51.
An OLE DB record is available. Source: OraOLEDB Hresult : 0x80040E51.
Description :"provider cannot provide parameter information and
SetParameterInfo has not been called."
Is someone can help with it?
Thanks
View 3 Replies
View Related
Nov 5, 2007
My goal is to run a bunch of select statements from different tables in one database and have them all insert to the same columns/table in the new database. Do I need a new data source for each statement, or is there a way to run all the statements in one set seeing as they all have the same destination. I keep receiving the SQL statement improperly ended error when trying.
View 5 Replies
View Related
Mar 12, 2008
I am using SQL 2005 SSIS. I am joining several large tables and then the move result into another table in the same database.
I would like know which method is faster:
Use Execute SQL Task to insert the result set to the target table
Use the Data Flow Task to insert the result set to the target table. (Use OLE DB source to execute SQL command and then use the SQL destination)
Could you tell me why then other is slower?
Thanks.
View 7 Replies
View Related
Aug 29, 2007
Hello,
Is it possible to use existing data flow components (Merge Join, aggregation,...) in a custom data flow component?
Thanks,
Yoann
View 15 Replies
View Related
Dec 14, 2004
I want to retrieve data from SQL containing non English character but fail, can anyone shed me some light?
What I use currently:
Dim strSQL As String
strSQL = "SELECT ArticleID, "
strSQL &= "ISNULL(Body, '') AS Body, "
strSQL &= "ISNULL(Subject, '') AS Subject "
strSQL &= "FROM Articles "
strSQL &= "WHERE (Subject LIKE N'%' + @Keyword + '%' OR [Body] LIKE N'%' + @Keyword + '%') "
Dim con As New SqlConnection(ConfigurationSettings.AppSettings("ConnectionString"))
Dim cmd As New SqlDataAdapter(strSQL, con)
cmd.SelectCommand.Parameters.Add("@Keyword", SqlDbType.NVarChar).Value = keyword
...
I'm not so sure where should I place the letter "N", I use :
SELECT ArticleID,
ISNULL(Body, '') AS Body,
ISNULL(Subject, '') AS Subject,
FROM Articles
WHERE (Subject LIKE N'%SomeNonEnglishString%' OR [Body] LIKE N'%SomeNonEnglishString%')
in Query Analzyer, it works! But it failed in my program... oh my god...
Thanks a lot!
View 4 Replies
View Related
Oct 26, 2007
Hello,
Is there any way to run a parameterized statement against SQL when you have an unknown ammount of inputs.
Instead of doing the following:
FOR i as integer = 0 to topValuestrWhere &= " OR myColName='"& myArr(i) &"'"
NEXT
wash up the string and submit this to SQL, I want to do it with parameters. I'm calling a sproc in SQL and I would prefer just to send in a string like "1,4,42',45" in a parameter split that in SQL and run my query.The query would be something like "...WHERE myColname=1 OR myColname=2 OR myColName=3" I only want to declare one parameter and not use string concatenation as described above.It doesn't matter if there's a split function in SQL or not, as long as it solves my problem in an efficient manner. Cheers!/Eskil
View 3 Replies
View Related
May 2, 2008
I am trying to create a stored procedure that will take a text value passed from an application and update a table using the corresponding integer value using a CASE statement. I get the error: Incorrect syntax near the keyword 'SET' when I execute the creation of the SP. What am I missing here? This looks to me like it should work. Here is my code.
CREATE PROCEDURE OfficeMove
-- Add the parameters for the stored procedure here
@UserName nvarchar(10),
@NewLocation nchar(5),
@NewCity nvarchar(250)
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
Execute as user = '***'
DELETE FROM [SQLSZD].[SZDDB].dbo.Employee_Office_Assignments
WHERE User_Name = @UserName
INSERT INTO [SQLSZD].[SZDDB].dbo.Employee_Office_Assignments
SET User_Name = @UserName,
Room_ID = @NewLocation
UPDATE [SQLSZD].[SZDDB].dbo.Employee_Locations
SET Office_ID =
CASE
WHEN @NewCity = 'Columbus' THEN 1
WHEN @NewCity = 'Cleveland' THEN 2
WHEN @NewCity = 'Cincinnati' THEN 4
WHEN @NewCity = 'Raleigh' THEN 5
WHEN @NewCity = 'Carrollwood' THEN 6
WHEN @NewCity = 'Orlando' THEN 7
END
WHERE User_Name = @UserName
END
GO
View 4 Replies
View Related
Feb 14, 2006
Hi, All,
I need to pass a parameter from control flow to data flow. The data flow will use this parameter to get data from a Oracle source.
I have an Execute SQL task in control flow to assign value to the Parameter, next step is a data flow which will need take a parameter in the SQL statement to query the Oracle source,
The SQL Looks like this:
select * from ccst_acctsys_account
where to_char(LAST_MODIFIED_DATE, 'YYYYMMDD') >?
THe problem is the OLE DB source Edit doesn€™t have anything for mapping parameter.
Thanks in Advance
View 2 Replies
View Related
Mar 9, 2007
I have an Execute SQL Task that returns a Full Rowset from a SQL Server table and assigns it to a variable objRecs. I connect that to a foreach container with an ADO enumerator using objRecs variable and Rows in first table mode. I defined variables and mapped them to the columns.
I tested this by placing a Script task inside the foreach container and displaying the variables in a messagebox.
Now, for each row, I want to write a record to an MS Access table and then update a column back in the original SQL Server table where I retreived data in the Execute SQL task (i have the primary key). If I drop a Data Flow Task inside my foreach container, how do I pass the variables as input to an OLE DB Destination on the Data Flow?
Also, how would I update the original source table where source.id = objRects.id?
Thank you for your assistance. I have spent the day trying to figure this out (and thought it would be simple), but I am just not getting SSIS. Sorry if this has been covered.
Thanks,
Steve
View 17 Replies
View Related
Jan 17, 2008
Dear All!
My package has a Data Flow Task. In Data Flow Task, I use a Script Component and a OLE BD Destination to transform data from txt file to database.
Within Data Flow Task, I want to call File System Task to move file to a folder or any Task of "Control Flow" Tab. So, Does SSIS support this task? Please show me if any
Thanks
View 3 Replies
View Related
May 17, 2007
Hi everyone,
Primary platform is 64 bit cluster.
How to move information allocated in SSIS variables from Data Flow to Control Flow layers??
We've got a SSIS package which load a value into a variable inside a Data Flow. Going back to Control Flow how could we retrive that value again????
Thanks in advance and regards,
View 4 Replies
View Related
Jul 22, 2007
Hi all! I recently started working with SSIS and one of the things that is puzzling me the most is what's the best way to go:
A small control flow, with large data flow tasks
A control flow with more, but smaller, data flow tasksAny help will be greatly appreciated.
Thanks,
Ricardo
View 7 Replies
View Related
Sep 4, 2007
Hello,
I have a SELECT statement which returns a result, depending on the selection the users make (application written in Visual Basic 2005). I want to export the result of the SELECT statement to a Excel file (.csv, or .txt). How should I proceed?
View 1 Replies
View Related
Dec 28, 2007
Hi,
I'm trying to implement an incremental data pull (Oracle to SQL) based on Andy's blog:
http://sqlblog.com/blogs/andy_leonard/archive/2007/07/09/ssis-design-pattern-incremental-loads.aspx
My development machine is decent: 1.86 GHz, Intel core 2 CPU, 3 GB of RAM.
However it seems the data flow task gets hung whenever I test the package against the ~6 million row source, as can be seen from these screenshots. I have no memory limitations on the lookup transformation. After the rows have been cached nothing happens. Memory for the dtsdebug process hovers around 1.8 GB and it uses 1-6 percent of CPU resources continuously. I am not using fast load to insert new records into my sql target table. (I am right clicking Sequence Container 3 and executing this container NOT the entire package in the screenshots)
http://i248.photobucket.com/albums/gg168/boston_sql92/1.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/2.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/3.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/4.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/5.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/6.jpg
The same package works fine against a similar test table with 150k rows.
http://i248.photobucket.com/albums/gg168/boston_sql92/7.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/8.jpg
The weird thing is it only takes 24 minutes for a full refresh of the entire source table from Oracle to the SQL target table.
Any hints,advice would be appreciated.
View 18 Replies
View Related
