Execute Same Statement For Each Value In Result Set
Jul 23, 2005
Hi everyone,
My brain refuses to remember the (undocumented?) stored procedure I'm
thinking of. It takes at least two parameters: a sql statement to
execute, and a table name (or something of that nature).
Then, for each value in the table, it executes the sql statement and
passes the value as a parameter.
Can anybody refresh my memory? The functionality may be slighly
different than described, but the principle is the same. Thanks very
much...
-Joe
View 3 Replies
ADVERTISEMENT
May 15, 2004
The Transact-SQL statements in the executed string do not have access to any of the variables declared in the batch that contains the sp_executesql or EXECUTE statement. The batch containing the sp_executesql or EXECUTE statement does not have access to variables or local cursors defined in the executed string
but I do not like to create a store procedure to get a output.
How can I get result from execute('...') like this:
declare @result int
set @result=0
execute('select @result=count(*) from table_cost')
View 1 Replies
View Related
Mar 5, 2008
On an Execute Process Task, are there properties I can examine to determine the outcome of a process? I know that I can use a Success/Failure constraint to direct my workflow appropriately, depending on the outcome, but I would prefer the workflow continue on to the same task regardless, and then be able to change the flow later on based on the outcome of the process.
I see there is an ExecValueVariable property, and this may be what I'm looking for, but I have no idea what this is and can not find any documentation on it. I tried using it, but kept getting a runtime error trying to set it to a variable.
I know that a process returns a numeric value, and it would be nice if I could store this somewhere.
Any suggestions?
Thanks in advance.
Jerad
View 3 Replies
View Related
Feb 19, 2007
I am getting the following error when I execute my sql task:
An error occurred while assigning a value to variable "NullVar": " NO result rowset is associated with the execution of this query. "
I am executing a SP that has one input & one output parameter. The output parameter is returning a single row for debugging if the sp failes.
I tried using Jamie's method:(http://blogs.conchango.com/jamiethomson/archive/2005/12/09/2480.aspx) to get it to work but keep getting the above error. I have the following variables:
sqlSource (string) := Exec RBCprcsInsertWmsInvTransactionRecords '" + (DT_WSTR,10 ) @[User::SnapShotDate] + "', NULL"
NullVar (string)
In the execute sql task, I set the ResultSet to single row. I set SQLSourceType = variable & sourcevariable = user::SqlSource. In the result tab, I added a result set, NewResultName with the variable user::NullVar. I tried different configurations with the parameter mappings but nothing seemed to work. I didn't know if i still had to use this if I am using the sqlSource variable to drive the task.
So I am not sure what I am missing here. Anyone have any suggestions?
Thanks!
John
View 5 Replies
View Related
Jan 25, 2007
Can I retrieve a result set from a sp into a variable within a Execute SQL Task?
View 23 Replies
View Related
Jun 13, 2007
Hi,
Let's say that the query in my SQL Task returns a single integer number.
How can I put that single number in a variable?
Thank you.
View 3 Replies
View Related
Sep 9, 2015
Code snippet that will Execute sql select query and automatically import the results to csv files.
View 6 Replies
View Related
Jul 11, 2007
Hello
How can i say this I would like my if statement to say: if what the client types in Form1.Cust is = to the Select Statement which should be running off form1.Cust then show the Cust otherwise INVALID CUSTOMER NUMBER .here is my if statement.
<% If Request.Form("Form1.Cust") = Request.QueryString("RsCustNo") Then%> <%=Request.Params("Cust") %> <% Else %> <p>INVALID CUSTOMER NUMBER</p> <% End If%>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:RsCustNo %>"
ProviderName="<%$ ConnectionStrings:RsCustNo.ProviderName %>" SelectCommand="SELECT [CU_CUST_NUM] FROM [CUSTOMER] WHERE ([CU_CUST_NUM] = ?)">
<SelectParameters>
<asp:FormParameter FormField="Cust" Name="CU_CUST_NUM" Type="String" />
</SelectParameters>
</asp:SqlDataSource>any help would be appreciated
View 2 Replies
View Related
Nov 5, 2007
I am building this as an expression, but it is not working. I am trying to return the row count into a variable to use later in an update statement. What am I doing wrong? I am using a single row result set. I have one variable defined in my result set. I am receiving an error stating: Execute SQL Task: There is an invalid number of result bindings returned for the ResultSetType: "ResultSetType_SingleRow". Any help is appreciated!
SELECT count(*) FROM hsi.itemdata a
JOIN hsi.keyitem105 b on a.itemnum = b.itemnum
JOIN hsi.keyitem106 c on a.itemnum = c.itemnum
JOIN hsi.keyitem108 d on a.itemnum = d.itemnum
WHERE a.itemtypegroupnum = 102
AND a.itemtypenum = 108
AND b.keyvaluechar = " + (DT_WSTR,2)@[User::Branch] + "
AND c.keyvaluechar = " + (DT_WSTR,2)@[User:epartment] + "
AND d.keyvaluesmall = " + (DT_WSTR,7)@[User::InvoiceNumber] + ")
View 6 Replies
View Related
Oct 22, 2007
Howdy all,
I have an Execute SQL Task that may return a result set. If it returns a result set, I'd like to log a failure in my package with the results visible.
I have logging turned on and that's working great. I've read about assigning results to a user variable of type Object and that's great. I can shred my results, thanks Jamie, with a Foreach loop no problem. Within that loop, I've got some VB that manipulates the values and will call Dts.Events.FireError as appropriate. However, VB is frowned upon here so my boss has asked that I push the VB logic into a Control Flow item.
I've built custom components already so I've got some familiarity with the process. Where I'm stuck at is figuring out _what_ the actual object type is in my code. The Connection manager is Native OLE DBSQL Native client. My Execute SQL Task uses a connection type of OLE DB with a Full result set. Results are stored in a variable named ErrorResultSet. Within the Execute method, I currently have this code set up in an attempt to pick apart the object and discover the available methods.
Code Block
Variables _variableCollection = null;
if (variableDispenser.Contains("ErrorResultSet"))
{
variableDispenser.LockForRead("ErrorResultSet");
}
variableDispenser.GetVariables(ref _variableCollection);
// Iterate through the variables that we were
// able to lock. Assigning values to entities as
// available.
foreach (Variable _en in _variableCollection)
{
switch (_en.Name)
{
case "ErrorResultSet":
Object _rs = _en.Value;
System.Type _type;
_type = _rs.GetType();
System.Data.DataSet _realResults;
_realResults = _rs as System.Data.DataSet;
// My expectation is that the cast of _realResults would
// not fail.
break;
}
}
// unlock before we go
_variableCollection.Unlock();
return DTSExecResult.Success;
At this point, my assumption is that the unboxed type of the recordset is not in the System.Data.DataSet inheritance chain as the cast failed. Anyone have insight into what it is? I can't seem to get any hits on google for what it's using behind the scenes in the Foreach ADO Enumerator.
Beyond the immediate question, anyone have thoughts on how else I can solve the problem? I had thought perhaps the task could raise an event if it returned rows but it didn't seem to have that functionality. Even if that had worked, telling the logging provider to capture the result set into the log might have been too much for native functionality. Another option I was thinking about would be to continue using the Enumerator and my custom component is a pure rewrite of the current Script task with the obvious downside being that I'd lose the generic-ness I was hoping to get with being able to hit my dataset.
View 8 Replies
View Related
Apr 2, 2007
Hi Guys,
I wonder if you can help with the following requirement.
I want to be able to conditionally execute an 'execute process task' depending on the result of a query. I have a table which I will select one record/row from upon each execution, this record has a char 1 'type' field which is the indicator for what process to then execute.
This should be quite a simple package and will be run every 60 seconds so needs to be as efficient as possible.
I am thinking I should go along the lines of using an Execute SQL task to select my row in to a result set, and using a series of precedence expressions to determine what process to execute. But im not really sure how.....
I am a newbie to SSIS and 2005 in general so would appreciate any help you can provide
Chris
View 3 Replies
View Related
Nov 20, 2007
Hi everybody,
For our customer we are trying to create dynamically local cube files. Because the requirements are complex and we need to generate a lot of cube files, we can't use the MDX script CREATE GLOBA CUBE to create the local cubes and we have to use SSIS to have it done automatically. These are the steps we are following:
1. In a SSIS package, through a Script task, we generate the ASSL script in order to create the database and we stores the script in a column of the XML datatype in SQL Server through a stored procedure "SSAS_TEST.InsertASSLScript". The following code is use in the script task:
Code Block
Imports System
Imports System.IO
Imports System.Data
Imports System.Math
Imports System.Xml
Imports System.Data.SqlClient
Imports Microsoft.SqlServer.Dts.Runtime
Imports Microsoft.AnalysisServices
Class ScriptMain
'Create writers and set formating for xml
Dim myScripter As Scripter
'Represents a writer to write information to a string
Dim myStringWriter As New System.IO.StringWriter()
Dim myStringWriterTrans As New System.IO.StringWriter()
'Represents a writer that provides a fast, non-cached, forward-only way of generating streams or files containing XML data that conforms to the W3C Extensible Markup Language (XML) 1.0 and the Namespaces in XML recommendations.
Dim myXmlTextWriter As System.Xml.XmlTextWriter
Dim myXmlTextWriterTrans As System.Xml.XmlTextWriter
Dim myXmlWriterSettings As XmlWriterSettings
Sub New()
myScripter = New Scripter
myXmlTextWriter = New System.Xml.XmlTextWriter(myStringWriter)
myXmlTextWriterTrans = New System.Xml.XmlTextWriter(myStringWriterTrans)
myXmlWriterSettings = New XmlWriterSettings
myXmlWriterSettings.OmitXmlDeclaration = True
myXmlWriterSettings.ConformanceLevel = ConformanceLevel.Auto
myXmlTextWriter.Formatting = Formatting.Indented
myXmlTextWriter.Indentation = 2
End Sub
Public Sub Main()
'Get Server name from DTS connection object and store in variable
Dim oDTSASConnection As ConnectionManager = Dts.Connections("SARP_Cubes")
Dim sASServer As String = CStr(oDTSASConnection.Properties("ServerName").GetValue(oDTSASConnection))
'MsgBox("Server " & sASServer & " has been connected")
Dim oASServer As New Microsoft.AnalysisServices.Server
'Connect to the requested server
oASServer.Connect(sASServer)
'Get Database name from DTS connection object and store in variable
Dim sASDBName As String = CStr(oDTSASConnection.Properties("InitialCatalog").GetValue(oDTSASConnection))
Dim oASDatabase As New Microsoft.AnalysisServices.Database
'MsgBox("InitialCatalog " & sASDBName & " has been found")
'Get database sASDBName and store in variable
oASDatabase = oASServer.Databases.GetByName(sASDBName)
'MsgBox("Database " & sASDBName & " has been connected")
'Get Cube
Dim CubName As String
If Dts.Variables.Contains("CubName") = True Then
CubName = CType(Dts.Variables("CubName").Value, String)
End If
Dim oASCube As New Microsoft.AnalysisServices.Cube
'MsgBox("Database " & sASDBName & " has been connected")
'Create a variable to store the create cube ASSL-script
'Dim sASSLCreateCub As String
'Store the create script in myXmlTextWriter
myScripter.ScriptCreate(New MajorObject() {oASDatabase}, myXmlTextWriter, False)
myXmlTextWriter.Flush()
'Create a string in order to manipulate the XML-string and append the Batch and process element
Dim sASSLString As String
sASSLString = "" & myStringWriter.ToString & "ProcessFull SARP_Cubes"
'Make a database conenction through connection manager
'Get Server name from DTS connection object and store in variable
Dim oDTSDBConnection As ConnectionManager = Dts.Connections("METADATA")
Dim sDBServer As String = CStr(oDTSDBConnection.Properties("ServerName").GetValue(oDTSDBConnection))
Dim sDBDatabase As String = CStr(oDTSDBConnection.Properties("InitialCatalog").GetValue(oDTSDBConnection))
Dim oBuilder As New SqlConnectionStringBuilder()
oBuilder.DataSource = sDBServer
oBuilder.InitialCatalog = sDBDatabase
oBuilder.ConnectTimeout = 1000
oBuilder.IntegratedSecurity = True
oBuilder.ApplicationName = "InsertASSLScript"
Dim oDBConnection As New SqlConnection(oBuilder.ConnectionString.ToString)
' Create Sql Command
Dim cmd As New SqlCommand("SSAS_TEST.InsertASSLScript", oDBConnection)
cmd.CommandTimeout = 60
cmd.Connection = oDBConnection
cmd.CommandType = CommandType.StoredProcedure
' Add parameters and their values
cmd.Parameters.Add(New SqlParameter("@COUNTRY_CODE", SqlDbType.VarChar, 255)).Value = "999"
cmd.Parameters.Add(New SqlParameter("@CUBE_XMLA", SqlDbType.VarChar)).Value = sASSLString
cmd.Parameters.Add(New SqlParameter("@DATABASE_ID", SqlDbType.VarChar, 255)).Value = sASDBName
cmd.Parameters.Add(New SqlParameter("@CUBE_ID", SqlDbType.VarChar, 255)).Value = "ALL CUBES"
' Open the connection
oDBConnection.Open()
' Execute the command
cmd.ExecuteNonQuery()
' Clean Up
myStringWriter.Close()
myStringWriterTrans.Close()
'myStringReader.Close()
'myXMLReader.Close()
myXmlTextWriter.Close()
'oDBConnection.Close()
oASServer.Disconnect()
Dts.TaskResult = Dts.Results.Success
End Sub
End Class
2. We manipulate the ASSL-script in order to create the cube that we want to have as local cube
3. We extract the final ASSL-script from the database through an "Execute SQL Task" with a XML Result Set. The SQL use in the task is:
Code Block
SELECT cast(CUBE_XMLA as varchar(max))
FROM SSAS_TEST.CUBE_XMLA
WHERE (COUNTRY_CODE = '500')
I have also tried
Code Block
SELECT CUBE_XMLA
FROM SSAS_TEST.CUBE_XMLA
WHERE (COUNTRY_CODE = '500')
and
Code Block
SELECT CUBE_XMLA
FROM SSAS_TEST.CUBE_XMLA
WHERE (COUNTRY_CODE = '500')
FOR XML AUTO
I always get the same error:
"Execute SQL Task: Executing the query "SELECT cast(CUBE_XMLA as varchar(max))
FROM SSAS_TEST.CUBE_XMLA
WHERE (COUNTRY_CODE = '500') " failed with the following error: "/ROOT/*[local-name()="Batch" and namespace-uri()="http://schemas.microsoft.com/analysisservices/2003/engine"][1]/*[local-name()="Create" and namespace-uri()="http://schemas.microsoft.com/analysisservices/2003/engine"][1]/*[local-name()="ObjectDefinition" and namespace-uri()="http://schemas.microsoft.com/analysisservices/2003/engine"][1]/*[local-name()="Database" and namespace-uri()="http://schemas.microsoft.com/analysisservices/2003/engine"][1]/*[local-name()="Cubes" and namespace-uri()="http://schemas.microsoft.com/analysisservices/2003/engine"][1]/*[local-name()="Cube" and namespace-uri()="http://schemas.microsoft.com/analysisservices/2003/engine"][1]/*[local-name()="MeasureGroups" and namespace-uri()="http://schemas.microsoft.com/analysisservices/2003/engine"][1]/*[local-name()="MeasureGroup" and namespace-uri()="http://schemas.microsoft.com/analysisservices/2003/engine"][1]/*[local-name()="Source" and namespace-uri()="http://schemas.microsoft.com/analysisservices/2003/engine"][1]
Type '{http://schemas.microsoft.com/analysisservices/2003/engine}MeasureGroupBinding' is not found in Schema."
Does anyone know how to handle this?
If we could use this XML variable, we will use another Script task to generate our Local Cube(s). The script task looks like this:
Code Block
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Imports Microsoft.AnalysisServices.AdomdClient
Imports System.Data.SqlClient
Imports System.Xml
Public Class ScriptMain
' The execution engine calls this method when the task executes.
' To access the object model, use the Dts object. Connections, variables, events,
' and logging features are available as static members of the Dts class.
' Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
'
' To open Code and Text Editor Help, press F1.
' To open Object Browser, press Ctrl+Alt+J.
Public Sub Main()
'Declare variables
'Connection
Dim conn As AdomdConnection
'Command
Dim cmd As AdomdCommand
'Cellset
Dim cst As CellSet
Dim strFilename As String = "D:TestLocal.cub"
Dim strSource As String = Dts.Variables("ASSLCreateScript").Value.ToString()
'*-----------------------------------------------------------------------
'* Open connection.
'*-----------------------------------------------------------------------
Try
' Create a new AdomdConnection object, providing the connection
' string.
conn = New AdomdConnection("Data Source=" & strFilename)
' Open the connection.
conn.Open()
Catch ex As Exception
Throw New ApplicationException( _
"An error occurred while connecting.")
End Try
Try
'*-----------------------------------------------------------------------
'* Open cellset.
'*-----------------------------------------------------------------------
' Create a new AdomdCommand object, providing the ASSL query string.
cmd = New AdomdCommand(strSource, conn)
' Run the command and return a CellSet object.
cst = cmd.ExecuteCellSet()
'*-----------------------------------------------------------------------
'* Release resources.
'*-----------------------------------------------------------------------
conn.Close()
Catch ex As Exception
' Ignore or handle errors.
Finally
cst = Nothing
cmd = Nothing
conn = Nothing
End Try
Dts.TaskResult = Dts.Results.Success
End Sub
End Class
I hope that someone can help us. We browse the net without result,
Thanks in advance.
View 5 Replies
View Related
Jul 18, 2007
Hi,
I have a 'Execute SQL Task' in my 'control flow', my 'Execute SQL Task' will return a value which I am assigning to a variable. Based on the value of the variable, I need to control my other flows. If the variable's value is 1 then I should invoke a dataflow, else I should write a failure error message in event viewer. Please could someone provide some inputs on how this can be done.
'Execute SQL Task' ----->value 1 ------>data flow to be executed
'Execute SQL Task' ----->value !=1 ------> write some error message in the event viewer and no tasks should be executed after that.
Thanks
raj
View 1 Replies
View Related
Jun 6, 2007
Hi guys
Is there anyone who was able to successfully retrieve a full result set? I'm really having troubles getting the result after executing my query. Its really even hard to get sample codes over the net.
Please help guys.
Thanks in advance.
kix
View 6 Replies
View Related
Dec 3, 2007
I am trying to have an Excecute SQL Task return a single row result set executed on SQL Server 2005.
The query in the Execute SQL Task is:
select 735.234, 2454.123
I get a conversion error when trying to assign to SSIS variables of type Double.
I have nothing configured in the "Parameter Mapping" tab.
I have the two SSIS Double variables mapped to the Tesult Name 0 and 1 in the "Result Set" tab
I don't want to use a for loop enumerator since there is a single row returned.
I simply want to assign these two values to SSIS Double variables (double is the closest match)
I can't even hack this by converting the decimals as string and then using DirectCast to convert them to Double.
Thanks for the help
View 1 Replies
View Related
Feb 13, 2008
I cannot find the data type for parameter mapping from Execute SQL Task Editor to make this works.
1. Execute SQL Task 1 - select max(columnA) from tableA. ColumnA is varbinary(8); set result to variable which data type is Object.
2. Execute SQL Task 2 - update tableB set columnB = ?
What data type should I use to map the parameter? I tried different data types, none working except GUI but it returned wrong result.
Does SSIS variable support varbinary data type? I know there's a bug issue with bigint data type and there's a work-around. Is it same situation with varbinary?
Thanks,
-Ash
View 8 Replies
View Related
Oct 10, 2006
This is the first time I've tried creating an "execute sql task" with a "full result set".
I've read in the documentation that I must set the resultname to 0, which is done, and that the variable must be of type object. Also done.
[Execute SQL Task] Error: Executing the query "select * from blah" failed with the following error: "The SelectCommand property has not been initialized before calling 'Fill'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Has anyone else had success with a full result set?
Thanks,
-Lori
View 10 Replies
View Related
Jul 20, 2007
I set up a connection to mysql using ADO.NET's ODBC Data Provider. And I'm running a simple query to return one table's maximum ID(int32 unsigned). There is no problem to achieve that.
But when I bind the result to a variable and excute task. It gives out error message: "An error occurred while assigning a value to variable "MaxAuditLogID": "Result binding by name "MaxID" is not supported for this connection type. "
I tried to change the type of variable around but with no luck.
Could anyone help with this issue? Thanks!
View 6 Replies
View Related
Apr 21, 2008
Hi,
What I would like to do is run a select statement, and then have the result of the select be used/run thru the same select again untill it hits a certain where clause.
This is for a where used search in our BOM (Bill of Material) table.
So for example
BOM 1
level 1 Item# 123 type Finished Good
level 2 Item# 45 type subassembly
level 3 Item# 56 type purchased item
BOM 2
level 1 Item# 678 type Finished Good
level 2 Item# 78 type subassembly
level 3 Item#56 type purchased item
So my input into the select statement would be Item# 56, it will then first find Item# 45 and Item# 78, but those I am not interested in. I want the select to then take Item#45 and Item#78 and run it thru the same select so that it will find Item#123 and Item#678.
The select will know to stop there since these are flagged as "Finished Good" in our system, so they will not be in any other BOM. This is what I would imagine being specified in the "where clause".
I can write the first part, where the select will find Item #45 and Item#78, but don't know how to get past that point.
Any help or suggestions are greatly appreciated!!
Thanks,
Michiel
View 14 Replies
View Related
Apr 7, 2008
Dear All
I have no idea to write a store procedure or only query to pass a string parameter more than 4000 characters into execute() and return result for FETCH and Cursor.
Here is my query sample for yours to understand.
SET NOCOUNT ON
DECLARE @ITEMCODE int, @ITEMNAME nvarchar(50), @message varchar(80), @qstring varchar(8000)
Set @qstring = 'select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm'
PRINT '-------- ITEM Products Report --------'
DECLARE ITEM_cursor CURSOR FOR
execute (@qstring)
OPEN ITEM_cursor
FETCH NEXT FROM ITEM_cursor
INTO @ITEMCODE
WHILE @@FETCH_STATUS = 0
BEGIN
PRINT ' '
SELECT @message = '----- Products From ITEM: ' +
@ITEMNAME
PRINT @message
-- Get the next ITEM.
FETCH NEXT FROM ITEM_cursor
INTO @ITEMcode
END
CLOSE ITEM_cursor
DEALLOCATE ITEM_cursor
Why i use @qstring? It is because the query will be changed by different critiera.
Regards
Edmund
View 6 Replies
View Related
Nov 5, 2003
I am using MSDE and WebMatrix. My stored procedure is creating a Dynamic SQL query and is is about 200 lines long.
I am not getting the expected results, but also not generating any errors. I inserted a Print statement to print the resultant SQL query, but I don't know how to see or display that print result.
I do NOT have SQL2000, only MSDE. I am using WebMatrix and VB.net to create my application. Is there some class in asp.net that will help me, or some free utility. One of the problems is that the dynamic SQL is using over 20 parameters to create the query; the end result of the user picking fields on the webform.
View 7 Replies
View Related
Oct 28, 2007
I am using MSSQL 2000, SQL Server Developer Edition and product version is : 8.00.760 (SP3)
Application Server: JBoss v 4.0.4
Driver : sql 2005 driver.
Hi,
I am running my application in JBOSS and hibernate to do all the query to the DB. While we are testing our application, it is working fine for the 1st day of stress testing, however after running for one days, it starts throwing the following exception. This can occur in a number of method call with no fixed pattern. Anyone has any idea what is going on?
used by: org.hibernate.exception.GenericJDBCException: could not execute query
at org.hibernate.exception.SQLStateConverter.handledNonSpecificException(SQLStateConverter.java:103)
at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:91)
at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:43)
at org.hibernate.loader.Loader.doList(Loader.java:2148)
at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2029)
at org.hibernate.loader.Loader.list(Loader.java:2024)
at org.hibernate.loader.hql.QueryLoader.list(QueryLoader.java:392)
at org.hibernate.hql.ast.QueryTranslatorImpl.list(QueryTranslatorImpl.java:333)
at org.hibernate.engine.query.HQLQueryPlan.performList(HQLQueryPlan.java:172)
at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1114)
at org.hibernate.impl.QueryImpl.list(QueryImpl.java:79)
at org.hibernate.impl.AbstractQueryImpl.uniqueResult(AbstractQueryImpl.java:756)
at org.hibernate.ejb.QueryImpl.getSingleResult(QueryImpl.java:63)
... 88 more
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.doExecutePreparedStatement(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement$PreparedStatementExecutionRequest.executeStatement(Unknown Source)
at com.microsoft.sqlserver.jdbc.CancelableRequest.execute(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeRequest(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.executeQuery(Unknown Source)
at org.jboss.resource.adapter.jdbc.WrappedPreparedStatement.executeQuery(WrappedPreparedStatement.java:236)
at org.hibernate.jdbc.AbstractBatcher.getResultSet(AbstractBatcher.java:186)
at org.hibernate.loader.Loader.getResultSet(Loader.java:1669)
at org.hibernate.loader.Loader.doQuery(Loader.java:662)
at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:224)
at org.hibernate.loader.Loader.doList(Loader.java:2145)
... 97 more
View 2 Replies
View Related
Mar 14, 2008
Hi, I execute a select statement
SELECT COUNT(*) FROM TABLEA WHERE DTRECORD < '1-MARCH-2008'
every times I execute it I get different result.
1st result : 17036986
2nd result : 17037903
3rd result : 17038309
Any idea??? There is no any inserting on TABLEA, so it should not has changes. Is that because of statistic is still updating?? I don't have much knowledge on this so I cannot sure the cause of the problem. Please advise.
View 18 Replies
View Related
Jun 11, 2008
Hi,I have this code following my signature to SELECT a number.I don't know what am I missing, because it always return the number which the variable banID was initialized (32 in this case).The strangest thing is that if I run the statement inside MS SQL SERVER, I get the right result.Any help would be appreciated.Warm Regards,Mário Gamito--// Get inserted user IDint banID = 32 ;SqlConnection myConn = new SqlConnection("Data Source=192.168.1.6; Initial Catalog=db1; User=sa; Password=secret");try{myConn.Open()}catch (Exception e){Console.WriteLine(e.ToString());}try{SqlCommand myCommand = new SqlCommand("SELECT MAX(PublisherID) FROM table1", myConn);banID = Convert.ToInt32(myCommand.ExecuteScalar);}catch (Exception e){ Console.WriteLine(e.ToString());}Response.Write(banID);
View 3 Replies
View Related
Nov 24, 2005
here is my update statement in a stored procedure:
create proc proc_add_comp
@comp_answer nvarchar(300),
@admin nvarchar(100),
@comp_id int
as
update tbComp set
comp_answer = comp_answer + ' - ' + @admin + ', ' + @comp_answer
where comp_id=@comp_id
then I try it like this :
exec proc_add_comp 'new answer','by me',1
result is : (1 row(s) affected)
but when I look in the db, nothing was changed, comp_answer still has its old value..
comp_answer is nvarchar type column..isnt add operation allowed in update statement?
thanks...
View 1 Replies
View Related
Nov 2, 2004
The query is (Select (25/20*100))
The wrong giving result is 100 it's should be 125
How I can use a query statement to get a correct result?
View 4 Replies
View Related
Jun 6, 2012
I want to export the data from a database and place it on a csv file to be imported to another database. However, I want some columns from the selected data (result of select statement) to be encrypted. What should I do? Is this possible? How do you decrypt the data during import?
The original data is from an MS SQL database to be transferred to a PostgreSQL database.
MS SQL ----- CSV (some columns are encrypted) ---- PostgreSQL (all columns decrypted)
I posted the same question on the mysql category. I wanted to delete it since I just realized today that I posted it on the wrong category but seems like there is no way I can delete.
View 2 Replies
View Related
Dec 28, 2007
How to get the CASE results highlighted in BOLD into this equation; "(LogOut - LogIn) + (LunchBreak) -(AMBreak) + (PMBreak) AS TimeWorked" ?
Thank you.
CREATE VIEW dbo.vwu_ReportViewASSELECT EmployeeID , LastName , FirstName , LocationCode , UserID , Today , Login , AMBreakOut , AMBreakIn , CASE WHEN ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) >= 0 AND ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) <= 19 THEN '0' WHEN ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) >= 20 AND ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) <= 34 THEN '15' WHEN ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) >= 35 AND ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) <= 49 THEN '30' WHEN ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) > = 50 AND ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) <= 64 THEN '45' ELSE '60' END AS AMBreak , LunchOut , LunchIn , CASE WHEN ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) >= 0 AND ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) <= 66 THEN '0' WHEN ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) >= 67 AND ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) <= 81 THEN '15' WHEN ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) >= 82 AND ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) <= 96 THEN '30' WHEN ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) >= 97 AND ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) <= 111 THEN '45' WHEN ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) >= 112 AND ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) <= 126 THEN '60' ELSE '75' END AS LunchBreak, PMBreakOut , PMBreakIn , CASE WHEN ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) >= 0 AND ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) <= 19 THEN '0' WHEN ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) >= 20 AND ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) <= 34 THEN '15' WHEN ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) >= 35 AND ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) <= 49 THEN '30' WHEN ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) >= 50 AND ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) <= 64 THEN '45' ELSE '60' END AS PMBreak , Logout , Comments , LoginLogon , AMBreakOutLogon , AMBreakInLogon , LunchOutLogon , LunchInLogon , PMBreakOutLogon , PMBreakInLogon , LogoutLogon ,(LogOut - LogIn) + (LunchBreak) -(AMBreak) + (PMBreak) AS TimeWorked
View 7 Replies
View Related
Oct 19, 2004
Ok, for a bunch of cleanup that i am doing with one of my Portal Modules, i need to do some pretty wikid conversions from multi-view/stored procedure calls and put them in less spid calls.
currently, we have a web graph that is hitting the sql server some 60+ times with data queries, and lets just say, thats not good. so far i have every bit of data that i need in a pretty complex sql call, now there is only one thing left to do.
Problem:
i need to call an aggregate count on the results of another aggregate function (sum) with a group by.
*ex: select count(select sum(Sales) from ActSales Group by SalesDate) from ActSales
This is seriously hurting me, because from everything i have tried, i keep getting an error at the second select in that statement. is there anotherway without using views or stored procedures to do this? i want to imbed this into my mega sql statement so i am only hitting the server up with one spid.
thanks,
Tom Anderson
Software Engineer
Custom Business Solutions
View 3 Replies
View Related
Jan 3, 2001
Hi all,
I want to save DBCC's result into a table to execute my statement but I don't know how to, exmple for DBCC OPENTRAN (my database) - how can I put SPID & UID to my variable from this statement?
Thanks in advance
Happy New Year
PTH
View 1 Replies
View Related
Apr 25, 2006
Gurus.I do not know if it is possible, but here is what I want to do.I want to allow user to page the SQL result, so he could decides toreturn from row 10 to row 20, or row 100 to 200, without returns thewhole resultset. Every time he sends another request, I do not mind tohit the database again, (I do not want to cache the result in themiddle tier server, scalability issue), and I know that I could achievethis with CURSOR, but unfortunately the FOR XML is not allowed in aCURSOR statement .(I know that I could achieve what I want to do by writing custom codein the middle tier, but I just want to see if there is a way to do thison the database side.)Any comments & suggestion is greatly appreciated.Thanks in advance.(I am using SQL2005)John
View 2 Replies
View Related
Jun 8, 2007
I'm trying to migrate to the 2005 JDBC driver against SQL Server 2000, but I'm getting the following exception: com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set. This is similar problem to a past thread: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=413019&SiteID=1
The difference is that my stored procedure uses cursors. This same stored procedure works fine with the 2000 JDBC driver.
Does anybody have any ideas how to resolve this problem?
View 14 Replies
View Related
Feb 1, 2008
Hi,
When a record is to be inserted, how can I check whether the insert is succeeded or not?
CREATE TRIGGER MY_TRIGGER ON MyTable AFTER INSERT
AS
DECLARE @id INT
DECLARE @name NVARCHAR(50)
SELECT @id=id,@name=name FROM INSERTED
BEGIN
INSERT INTO MySubTable(id,name) VALUES(@id,@name)
-- if failed, rollback
END
GO
GO
View 3 Replies
View Related
