Executing BCP Utility Inside Sp....
Feb 26, 2004
Hi ,
My reuierement is to execute a bcp to write the query output to a flat file. I am using the following syntax...
exec xp_cmdshell 'bcp "SELECT top 50 * tbl_xyz" queryout tbl_xyz_output.txt -c -S abc -U x -P x'
But I am getting the following error....
output
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CTLIB Message: - L6/O8/S5/N3/5/0:
ct_connect(): directory service layer: internal directory control layer error: Requested server name not found.
Establishing connection failed.
NULL
This bcp executes perfect if I am going to call from command prmomt.
Can anyone please help me in this....
Thanks in Advance.
-Mohit.
View 4 Replies
ADVERTISEMENT
Feb 29, 2008
Hi All,
I developed my package in BI studio and tested runnning it through BI. Now when i have to deploy the package to main server it will be executed via batch job. This package requires an input file name too.
Now when i am trying to run the package on my loacal box using following command on command prormpt i get error given below.
COMMAND USED BY ME: DTExec /FILE 'C:ProjectIntegrationServicesSFRIntegrationServicesinpkgSFRLocation.dtsx' /SET Package.Variables[InputParamFileName].Value;'C:DataDumpInputLOC00022'
ERROR MESSAGE:
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 1:29:54 PM
Error: 2008-02-22 13:29:54.96
Code: 0xC0011007
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Description: Unable to load the package as XML because of package does not ha
ve a valid XML format. A specific XML parser error will be posted.
End Error
Error: 2008-02-22 13:29:54.96
Code: 0xC0011002
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Description: Failed to open package file "'C:ProjectIntegrationServicesSFR
IntegrationServicesinpkgSFRLocation.dtsx'" due to error 0x800700A1 "The speci
fied path is invalid.". This happens when loading a package and the file cannot
be opened or loaded correctly into the XML document. This can be the result of
either providing an incorrect file name was specified when calling LoadPackage o
r the XML file was specified and has an incorrect format.
End Error
Could not load package "'C:ProjectIntegrationServicesSFRIntegrationServices
inpkgSFRLocation.dtsx'" because of error 0xC0011002.
Description: Failed to open package file "'C:ProjectIntegrationServicesSFRInt
egrationServicesinpkgSFRLocation.dtsx'" due to error 0x800700A1 "The specifie
d path is invalid.". This happens when loading a package and the file cannot be
opened or loaded correctly into the XML document. This can be the result of eit
her providing an incorrect file name was specified when calling LoadPackage or t
he XML file was specified and has an incorrect format.
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Started: 1:29:54 PM
Finished: 1:29:54 PM
Elapsed: 0.047 seconds
PLease let me know solution to creating batch job for executing this pkg with input param.
View 8 Replies
View Related
Feb 13, 2006
I have a strange problem, I want to execute different stored procedures based on certain criteria defined in the database. I am able to execute the sp using the sp_executesql system stored procedure.
Exec sp_executesql N’exec procedurename {parameterlist}’, N’{parameter declaration}’, Parametervalues
Now I want to read a particular value that is being return be the procedure.
NOTE: procedure is returning a resultset.
Please help me.
Thanks!
View 3 Replies
View Related
May 7, 2005
Hello :) I need to do something like this:
CREATE PROCEDURE SelectCostumers @name varchar(100)
Declare @SQL = "SELECT Id, Name FROM Costumers"
AS
IF (@name IS NULL)
@SQL
ELSE
@SQL += "WHERE Name LIKE @name"
See, what I need is a string variable that I can concatenate with whatever I want depending on the parameter I get.
Thank you
View 2 Replies
View Related
Nov 10, 2006
Hi
I have a problem executing a SELECT inside a TRAN against other computer
For example:
IN THE SQL Query Analizer of the COMPUTER2
1) this runs OK
BEGIN TRAN
SELECT * FROM COMPUTER2.DATABASE.DBO.TABLE
COMMIT TRAN
2) this runs OK
SELECT * FROM COMPUTER2.DATABASE.DBO.TABLE
3) this runs OK
SELECT * FROM COMPUTER1.DATABASE.DBO.TABLE
4) this runs bad
BEGIN TRAN
SELECT * FROM COMPUTER1.DATABASE.DBO.TABLE
COMMIT TRAN
The problem is that TABLE locks and it does not finish.
I've been looking for similar ERRORS in Microsoft Support but I found nothing
I've uninstall and install de SQL server 2000 SP4 and the problems continues the same
Please, someone could help me, thanks
View 11 Replies
View Related
Sep 12, 2007
For inserting current date and time into the database, is it more efficient and performant and faster to do getDate() inside SQL Server and insert the value
OR
to do System.DateTime.Now in the application and then insert it in the table?
I figure even small differences would be magnified if there is moderate traffic, so every little bit helps.
Thanks.
View 9 Replies
View Related
Nov 16, 2007
I'm trying to execute a stored procedure within the case clause of select statement.
The stored procedure returns a table, and is pretty big and complex, and I don't particularly want to copy the whole thing over to work here. I'm looking for something more elegant.
@val1 and @val2 are passed in
CREATE TABLE #TEMP(
tempid INT IDENTITY (1,1) NOT NULL,
myint INT NOT NULL,
mybool BIT NOT NULL
)
INSERT INTO #TEMP (myint, mybool)
SELECT my_int_from_tbl,
CASE WHEN @val1 IN (SELECT val1 FROM (EXEC dbo.my_stored_procedure my_int_from_tbl, my_param)) THEN 1 ELSE 0
FROM dbo.tbl
WHERE tbl.val2 = @val2
SELECT COUNT(*) FROM #TEMP WHERE mybool = 1
If I have to, I can do a while loop and populate another temp table for every "my_int_from_tbl," but I don't really know the syntax for that.
Any suggestions?
View 8 Replies
View Related
Jan 24, 2008
Hi,
I have a web application using Stored Procedure (SP). I see that there's a SP taking long time to execute. I try to capture it by Profiler Tool, and find out that with the same SP on the same db with the same parameter. The duration of executing by my web app is far bigger than the duration of executing on SQl server management studio - query window
Please see the image through this url http://kyxao.net/127/ExecutionProblem.png
Any ideas for this issue?
Thanks a lot
View 1 Replies
View Related
Jan 23, 2008
Hi,I have a web application using Stored Procedure (SP). I see that there's a SP taking long time to execute. I try to capture it by Profiler Tool, and find out that with the same SP on the same db with the same parameter. The duration of executing by my web app is far bigger than the duration of executing on SQl server management studio - query windowPlease see the image attached http://kyxao.net/127/ExecutionProblem.png Any ideas for this issue?Thanks a lot Jalijack
View 2 Replies
View Related
Oct 10, 2006
Hi all,I am facing an unusual issue here. I have a stored procedure, that return different set of result when I execute it from .NET component compare to when I execute it from SQL Management Studio. But as soon as I recompile the stored procedure, both will return the same results.This started to really annoying me, any thoughts or solution? Thanks very much guys
View 2 Replies
View Related
May 26, 2008
Just wonder whether is there any indicator or system parameters that can indicate whether stored procedure A is executed inside query analyzer or executed inside application itself so that if execution is done inside query analyzer then i can block it from being executed/retrieve sensitive data from it?
What i'm want to do is to block someone executing stored procedure using query analyzer and retrieve its sensitive results.
Stored procedure A has been granted execution for public user but inside application, it will prompt access denied message if particular user has no rights to use system although knew public user name and password. Because there is second layer of user validation inside system application.
However inside query analyzer, there is no way control execution of stored procedure A it as user knew the public user name and password.
Looking forward for replies from expert here. Thanks in advance.
Note: Hope my explaination here clearly describe my current problems.
View 4 Replies
View Related
Aug 6, 2002
Hello ,
I want to know how can i can use the bcp coomand to import a text file into a SQL database table . The text file contains info. like servername , date , time , logininfo and description .
The problem is i cannot import that file into the table through data import wizard . The wizard is not able to separate the fields properly and the import takes place with mixed up data in different columns . The separator in the text file is colon . I even tried fixed length with manual column separation .
The text in the text file are not aligned properly as these are log files generated by the system which i am trying to import in a table .
So how can use the bcp command to specify the column length properly and seperate the fields uniformly so that the data gets imported neatly .
Any thoughts how could the command look like ?
Thank you very much .
Anita.
View 1 Replies
View Related
Aug 2, 2001
Hi,
I used bcp utility to import and export data between databases. These exported data is it read only? If so how can I change the parameter so that we could edit as well.
Any suggestions will be helpful. Thank you!
View 1 Replies
View Related
Oct 8, 2002
I'm trying to use the bcp command to bcp out a single table in a database, what is the best way to do this in the query analyzer? Thanks in advance.
View 1 Replies
View Related
Jul 27, 2004
Hi all,
I want to use the BCP utility to import data from a .dat file into my database. The .dat file contains a table called xv_Appointments containing the following fields:
AppointmentKey
SurgerySlotKey
PatientKey
Cancelled
Continuation
Deleted
TimeArrived
I would like to import only two of these fields into a table called tbl_Appointments e.g.
AppointmentKey
TimeArrived
I can't seem to get the BCP util to do this. It only works if I import all of the fields from xv_Appointments. Does anyone know if this is possible?
Thanks
View 8 Replies
View Related
Jan 20, 2004
In the process of exporting data from SQL data file to text file through BCP utility I am not getting the Column names.How can I get the column names through BCP utility?
I used this script
exec master..xp_cmdShell 'bcp "select * from regulator.dbo.TEMPTBLBRANCHNOTUPLOAD" QueryOUT \indiadbftprootCLIENT_BRANCH_UPLOADranchnotup loaded.csv -S indiadb -U sa -P sasocrates -k -r -c -t "," -q'
View 1 Replies
View Related
Feb 28, 2004
Hello,
I am using the DTS utility available with Enterprise Manager in MSSQL server 2000. I can transfer the tables and views without any issues but when i try to transfer the stored procedures it always gives an error. I have tried transferring individual objects too but it does'nt works. The error given is "the user <username> cannot perform the following action". Any help is appreciated.
Thanks in Advance
View 4 Replies
View Related
Jun 2, 2008
Hello, I need to create a stored procedure that creates a csv file. this is the code I have so far.
Script is like
CREATE PROCEDURE dbo.GetQuestionInfoCSV AS
BEGIN
declare @sql varchar(8000)
SET @sql = 'bcp "SELECT * FROM dbo.ISO_table" queryout C:GetCSV.CSV -c -t, -T -S MANCHESTSQLEXPRESS'
print @sql
EXEC master..xp_cmdshell @sql
END
and I get these errors on execution
SQLState = 42S02, NativeError = 208
Error = [Microsoft][SQL Native Client][SQL Server]Invalid object name 'dbo.ISO_table'.
SQLState = 42000, NativeError = 8180
Error = [Microsoft][SQL Native Client][SQL Server]Statement(s) could not be prepared.
NULL
Any help would much appreciated.
View 2 Replies
View Related
Nov 29, 2005
Greetings,Just wanted to know if there is any parameter in BCPutility that can ignore triggers, indexes and constraint defined for atable?any help will be greatly appreciatedTIA
View 2 Replies
View Related
Nov 30, 2007
I'm using SQL 2005 to export data. I would like to use the bcp utilityto export data to an Excel file.I have to generate quite a few files and the names are dynamic. Theideal would be to loop through records in a stored procedure to createa file name to use in the bcp. My question is how can I use the bcpfrom a stored procedure? I know how to run it from the command prompt.Is there a way to control the command prompt from a stored procedure?Thanks all
View 2 Replies
View Related
Apr 9, 2001
Hello everyone,
I have a question about dtsrun hoping someone have an answer. Does anyone know if there is a switch that I can turn onoff so that it will suppress the output result when I execute the dtsrun ulitity?
This is what I ran:
master..xp_cmdshell 'dtsrun /Sclancy /E /N ExpDispute'
I get the following result back after it's done:
output
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
DTSRun: Loading...DTSRun:Executing...DTSRun OnStart: Copy Data from Results to [Transplus_TestArchive].[dbo].[SG_DISPUTE] Step DTSRun OnProcess: Copy Data
from Results to [Transplus_TestArchive].[dbo].[SG_DISPUTE] Step; 14 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 14 DTSRun OnFinish: Copy Data from Results to [Transplus_TestArchive].[dbo].[SG_DISPUTE] Step DTSRun:
Package execution complete.
(6 row(s) affected)
Thank you in advance for any help.
Mai Nguyen
View 2 Replies
View Related
Apr 19, 1999
Hello All!
I would like to have the SQL server to mail me the alert to my email account.
The mail server is not in our domain.
So how would I set this up so that the alert can be emailed.
Thanks in advance for ur help.
Venkat
View 1 Replies
View Related
Jan 19, 2001
I am currently in the process of transfering data from an existing SQL 6.5 server to new box. Both boxes have SQL 6.5 with SP4. I having a problem with a paticular database transfer. The Database/Object transfer utility starts and then about 20% in it says that it is complete. The transfer creates all the objects in the new server but does not transfer the data. I have manually transferred the data but I am curious if anyone else has had this problem or if this is a known bug. Just curious. Thanks
View 2 Replies
View Related
Aug 6, 2001
Hi,
All the wanted to know whether the ISQL utility is optional during the sqlserver setup??? Is it possible to install sql server without installing ISQL utility??
Thanks in advance,
Asha
View 1 Replies
View Related
May 31, 1999
hi....
ok...all i want to do is take a global variable and pass it to another procedure using a wrapper... what am i missing...
if i call the 2nd procedure from the first it works fine.... but if i use the wrapper to call both procedures...and yes before you ask i am calling the first procedure that creates the variable before the second which uses it...
it doesn't see it... says it has no value...what am i missing.. please help...
kim
View 5 Replies
View Related
Jan 28, 2001
I am trying to do BCP from a comma separator .txt file to upload it into two tables. That is I want the first row (4 columns of header details ) into one table and from the second row (21 columns each of detail rows) to be uploaded into another table. I have written a batch file to upload the header details by giving the first and last column as 1.It is working fine. But when I try to upload the detail rows into another table by giving the first row as 2, the bcp is not able to read from the second row. It skips the second row and reads from the third row. This happens for all separators like pipeline separators also.So to avoid this I have to give blank 21 separators(i.e. , or |) in the second row to avoid the loss of data. Please provide a solution for this, as I cannot insist my customer to provide me a text file with blank comma in the second row.
Thanks and Regards,
S.Raghuraman
View 1 Replies
View Related
Jul 28, 2004
using osql utility i have converted a table in database to excel format. I have also chinese data in my database . The problem is while converting the data into excel format ,the chinese data is not comming in excel sheet.
Does anybody have an idea about this .
For converting i have used
declare @x varchar(300)
set @x = 'osql -S Servername -U username -P passwd -q "select * from northwind..region order by cand_index" -w 3000 -s "," -o C:directoryfilename.csv'
Thanks
View 2 Replies
View Related
Aug 14, 2004
Hi all
I am using osql utility in sql server 2000 to convert data in database to excel sheet. My datas contain both english and chinese . While converting to excel sheet english datas are comming but the datas in chinese is comming like (?) this. Does any body has any idea to solve this problem. is there any way to set font in osql utility.
set @x = 'osql -S servername -U username -P password -q "select * from
northwind..region" -w 3000 -s "," -o C:Downloaddownload.csv'
This is what i have used.
Note: I tried giving chinese font in excel still it is not working.
Its really urgent pls reply
thanks
View 2 Replies
View Related
Apr 22, 2008
The following webpage desribes the rs utility:-
http://msdn2.microsoft.com/en-us/library/ms162839.aspx
And it says that rs supports the optional parameter, -ltimeout
Can someone tell me what this timeout does/means?
We are passing in a VB.NET script file that reads an XML file that executes a series of reports. Does the timeout apply to the whole VB.NET script file, or to the individual execution of each report?
Can you also tell me, what happens if it times-out? Does SQL Server kill the SQL job generating the report? Or does it just disconnect the client from the server leaving the job to continue generating the report?
Thanks
View 1 Replies
View Related
Dec 9, 2007
Hi guys,
I'm trying to use the bcp utility to transfer data from an SQL Server table (CUSTOMERS) to a text file (test.txt).
Here is what I have:
DECLARE @FileName varchar(50)
SET @FileName = 'C: est.txt'
EXEC bcp BAirwaysDB..CUSTOMERS out @FileName -S<servername> -T
only I keep getting the error:
Msg 102, Level 15, State 1, Line 4
Incorrect syntax near '.'.
and when running:
bcp BAirwaysDB..CUSTOMERS out C: est.txt -S<servername> -T
on the command line I get:
SQLState = 28000, NativeError = 18456
Error = [Microsoft][SQL Native Client][SQL Server]Login failed for user 'RIVERAMelanie'.
SQLState = 42000, NativeError = 4060
Error = [Microsoft][SQL Native Client][SQL Server]Cannot open database "BAirways" requested by the login. The login failed.
Can you see where I'm going wrong with this? Any feedback would be really appreciated.
Thank you
Butterfly82
View 7 Replies
View Related
Aug 18, 2005
I have been successful at setting up three or four DTS packages to runusing the DTSrun command line utility and the Windows scheduler untilnow. The latest package gives me the following error no matter what Itry.Error: -2147217355 (80041035); Provider Error: 0 (0)Error string: General error -2147217355 (80041035).Error source: Microsoft Data Transformation Services (DTS) PackageHelp file: sqldts80.hlpHelp context: 705I googled the error but got only two hits, only one of which actuallydiscussed the error. That one talked about the security and ID contextof the system agent but I can't even run the package from the commandline, never mind using the Windows chron. The DTS command line I'musing looks like this:DTSRun /S MyServerInstance /R DBName /N MyDTSPacakgeName /EVariations included /U MyUserName /P MyPassWord and a couple others.Next step would have been to use /!Y and /!C to create an encoded batchfile to use for the Windows scheduler.Any help would be most appreciated.Randy
View 4 Replies
View Related
Feb 22, 2007
I'm getting some errors when I run rs.exe from command line with regard to Parameters, and was hoping I might get some help here. I'm somewhat new to RS. I'm running SQL 2000 and RS 2000 on a Windows 2003 Server.
Here is my script:
***********************************************************
' File: RunReport.rss
Dim format as string = "Excel"
Dim fileName as String = "C:Export2.xls"
Dim reportPath as String = "/APSAgentCourseCompletionByUserGroup"
Public Sub Main()
' Prepare Render arguments
Dim historyID as string = Nothing
Dim deviceInfo as string = Nothing
Dim showHide as string = Nothing
Dim results() as Byte
Dim encoding as string
Dim mimeType as string = "ms-excel"
Dim warnings() AS Warning = Nothing
Dim reportHistoryParameters() As ParameterValue = Nothing
Dim streamIDs() as string = Nothing
rs.Credentials = System.Net.CredentialCache.DefaultCredentials
' Report Parameters
Dim parameters(5) As ParameterValue
parameters(0) = New ParameterValue()
parameters(0).Name = "User Group"
parameters(0).Value = "66179312-f341-4df7-a855-79c5b8abaf9f"
parameters(1) = New ParameterValue()
parameters(1).Name = "Start Date"
parameters(1).Value = "12/22/2006"
parameters(2) = New ParameterValue()
parameters(2).Name = "End Date"
parameters(2).Value = "2/17/2007"
parameters(3) = New ParameterValue()
parameters(3).Name = "Course Name"
parameters(3).Value = "AA2B1AA0-E78A-4F84-834F-8EAAB75BEBD3"
parameters(4) = New ParameterValue()
parameters(4).Name = "Status To Include"
parameters(4).Value = "0"
results = rs.Render(reportPath, format, _
Nothing, Nothing, parameters, _
Nothing, Nothing, encoding, mimeType, _
reportHistoryParameters, warnings, streamIDs)
' Open a file stream and write out the report
Dim stream As FileStream = File.OpenWrite(fileName)
stream.Write(results, 0, results.Length)
stream.Close()
End Sub
'End of script
***********************************************************
As you can see, right now I've got all 5 report parameters hard-coded.
Here is the command line that I'm using as well as the error that I receive:
rs.exe -i c:RunReport.rss -s http://localhost/reportserver -t
Unhandled exception: The value of parameter 'Parameters' is not valid. Check the documentation for information about valid values.
Any insight that anyone can provide is greatly appreciated.
Thanks!
Ray
View 2 Replies
View Related
Feb 1, 2008
Hi,
I want to know is it possible to export column data to a http folder ? When I executed the following bcp command
exec master.dbo.xp_cmdshell 'bcp "SELECT code from Table" queryout http://[server]:[portno]/Sample1.aspx -T -c'
the system throws an error.
SQLState = HY000, NativeError = 0
Error = [Microsoft][SQL Native Client]Unable to open BCP host data-file
Is it possible such a bcp command ?
Thanks
Maju
View 2 Replies
View Related
