Is there a way to get the Report Manager to allow a single user to
execute more than 1 report at a time? Currently, each user can only
have a single report being executed at a time. It looks like any
other reports are being queued and executed serially.
Hi Everyone,
I have a software solution that consists of two separate applications that share a SQL Server Express database on a single computer. Everything is working great, except when both of the applications want to access the database at the same time. All I can find is information on configuring multi-user access in a distributed system. I'd appreciate any information on configuring multi-application access on a single computer.
Thanks,
Mike
Hi..
I have deployed reports on to the report server. When I try to open the reports from report server, I get the error," Value does not fall within the expected range." This error message appears as soon as I click on any report on the report manager.
I am not able to find the cause of the error.
Does anybody have any suggestions?
Thanks ,
Viva
Hi All,
I'm creating 15 reports based on one data source.
Once I created, I'm supposed to run this on daily and monthly basis. I'm going to use snapshot option in Report Manager. Is it fine?
Do I need to create a data base too?
Also when I change the target URL address in the report property box, can I deploy it to any other server? Do I have to change the settings of report configuration manager too, inorder to publish reports on another server(not in my local machine)
I really appriciate answers for these questions
Thanks
Hi,
I'm just starting out with SSIS and I'm currently looking to migrate some non-SSIS ETL processes to SSIS. Some of these processes are run manually depending on the results from a previous step. In these processes a user remotely executes an individual ETL program and is shown reports detailing the result of the program and various statistics about the data involved.
Is it possible to replicate this behaviour with SSIS / SSRS, or would the user have to execute a package and then manually find and bring up each of the relevant reports?
I'm new to SSIS and I'm still struggling to find out SSIS's capabilities, so I'd be really grateful if anyone could shed some light on this...
Thanks in advance,
Lawrie.
I am trying to create a report using Reporting Services.
My problem right now is that the way the table is constructed, I am trying to pull 3 seperate values i.e. One is the number of Hours, One is the type of work, and the 3rd is the Grade, out of one column and place them in 3 seperate columns in the report.
I can currently get one value but how to get the information I need to be able to use in my reports.
So far what I've been working with SQL Reporting Services 2005 I love it and have made several reports, but this one has got me stumped.
Any help would be appreciated.
Thanks.
I might not have made my problem quite clear enough. My table has one column labeled value. The value in that table is linked through an ID field to another table where the ID's are broken down to one ID =Number of Hours, One ID = Grade and One ID= type of work.
What I'm trying to do is when using these ID's and seperate the value related to those ID's into 3 seperate columns in a query for using in Reporting Services to create the report
As you can see, I'm attempting to change the name of the same column 3 times to reflect the correct information and then link them all to the person, where one person might have several entries in the other fields.
As you can see I can change the names individually in queries and pull the information seperately, it's when roll them altogether is where I'm running into my problem
Thanks for the suggestions that were made, I apoligize for not making the problem clearer.
Here is a copy of what I'm attempting to accomplish. I didn't have it with me last night when posting.
--Pulls the Service Opportunity
SELECT cs.value AS "Service Opportunity"
FROM Cstudent cs
INNER JOIN cattribute ca ON ca.attributeid = cs.attributeid
WHERE ca.name = 'Service Opportunity'
--Pulls the Number of Hours
SELECT cs.value AS 'Number of Hours'
FROM Cstudent cs
INNER JOIN cattribute ca ON ca.attributeid =cs.attributeid
WHERE ca.name ='Num of Hours'
--Pulls the Person Grade Level
SELECT cs.value AS 'Grade'
FROM Cstudent cs
INNER JOIN cattribute ca ON ca.attributeid =cs.attributeid
WHERE ca.name ='Grade'
--Pulls the Person Number, First and Last Name and Grade Level
SELECT s.personnumber, s.lastname, s.firstname, cs.value as "Grade"
FROM student s
INNER JOIN cperson cs ON cs.personid = s.personid
INNER JOIN cattribute ca ON ca.attributeid = cs.attributeid
WHERE cs.value =(SELECT cs.value AS 'Grade'
WHERE ca.attributeid = cs.attributeid AND ca.name='Grade')
I am generating hundreds of lines of sql with a tool and wish to execute is in runtime. The sql consists of table creation, procedure creation, aswell as inserts and updates. When i try with SqlDataAdapter I get an error. Does anyone have a solution on what I can do?
View 2 Replies View RelatedHey guys,
What is the best way to run multiple sql scripts against a database.
Vendor provided a DBupdate utility but it isn't working properly.....
any suggestions....
thanks,
jonathan
Hi,
I would like to execute multiple stored procs by calling a single script say A. I want to A to execute on a nightly basis. The multiple stored procs are bulk inserts into separate tables. I want to be notified of the error if one among the many stored procs fail when I call A. But if one fails, I don't want A to fail. The remaining stored procs should execute. Does anyone have a script wriiten for A? I guess A is just not about -
EXEC SP1
EXEC SP2
EXEC SP3
EXEC SP4
EXEC SP5
Thanks
I am trying to execute around 3 SSIS packages using Execute package task by having all the 3 in one SSIS package,
I am getting the below error:
Error: Error 0xC001000A while preparing to load the package.
The specified package could not be loaded from the SQL Server database. .
Can I use Execute package task for this purpose??
Thanks!!
I am probably missing something simple here but...
I have a CLR Stored Procedure where I am attempting to execute multiple SQL commands. Here is what happens.
Case One
1. Stored Procedure is invoked.
2. Create SQL Connection.
3. Open the connection.
4. Begin Transaction.
5. Create Command from Connection.
6. Set Command objects Transaction property to transaction created above.
7. Set Command Text Property to SQL Query.
8. Execute Query via ExecuteReader and get SQLReader.
9. Read query result set.
10. Close QueryReader.
11. Set Command Text Property to another SQL Query.
12. Execute Query
This is where I get one of two exceptions.
1. An Exception stating that I cannot have parallel transactions.
or
2. An Exception that I have an open SqlReader that must be closed.
Case Two
1. Stored Procedure is invoked.
2. Create SQL Connection.
3. Open the connection.
4. Begin Transaction.
5. Create Command from Connection.
6. Set Command objects Transaction property to transaction created above.
7. Set Command Text Property to SQL INSERT command.
8. Execute Insert command.
9. Set Command Text Property to SQL Query command.
10. Execute Query Command via ExecuteReader.
At this point the stored procedure appears to hang.
Could someone please enlighten me if I have missed something obvious while reading the manual, regarding what you can and cannot do?
Thanks in advance.
HI,
We are currently trying to import the Data from one DB to Multiple DBs.And these multiple DBs connection strings must be configurable. This I can do it by reading the connection strings from dtsconfig file and execute it for each DB.Is it possible to execute for all the DBs in parallel(Multithreaded).
Thanks,
Sabari.
hi,
i am making a n application which in between deletes the multiple tables from the sql database.
for that i have written the following code:
SqlCommand cmd = new SqlCommand();
cmd.CommandText = "delete from " + dbConstt.DBSchema + ".PicassoSelectivityLog where QTID=" + qtid;
cmd.ExecuteNonQuery();
cmd.CommandText = "delete from " + dbConstt.DBSchema + ".PicassoSelectivityLog where QTID=" + qtid;
cmd.ExecuteNonQuery();
in this way, many more tables are to be deleted.
is there any need to create the new SQLCommand object again and agin for each and every query. can iot be done like the given above or can there be some better method?
thanz in advance..
divya
Hi,
I am executing following script which return more than 1 query/row as there are more than 1 log backup :
select @Query = 'RESTORE LOG ' + @dbName + ' FROM DISK=' + '''' +@path+''''+ ' WITH' + ' NORECOVERY, FILE= ' + convert(varchar(10),Position) from #temp where BackupName = 'Log_Backup' and BackupType = 2 and Position> @Diff_Position EXEC(@QUERY)
[Above script restores database with latest Differential backup file and latest log files. ]
Now I want to execute this, but @Query don't work for more than one row returned . Can you please suggest me how to execute such query?
Thanks,
Dipak.
I am trying to execute around 3 SSIS packages using Execute package task by having all the 3 in one SSIS package,
I am getting the below error:
Error: Error 0xC001000A while preparing to load the package.
The specified package could not be loaded from the SQL Server database. .
Then I did the following:
1. Right click on MSDB
2. Import package
Inside Import package window:
Package location: SQL Server
Server: servername
authentication: windows authen
Package path: \serverC$folder1SSIS Packagesfolder2
Import package as:
Package name: package.dtsx
Below is the error I am getting:
TITLE: Import Package
------------------------------
Cannot find folder "\serverC$folder1SSIS Packagesfolder2".
Can I use Execute package task for this purpose??
Thanks!!
Hi all,
Is there any way so that we can run/ execute multiple jobs or local packeges at once. Can we create any sql script which will execute multiple jobs/packeges at once. please advise
Hello!We have a set of individual .SQL scripts which we would like toexecute against a MS SQL Server 2000. Is there any way to have ISQLutility (or any other means) to execute all of them without having toestablish a separate database connection for each script:isql -Ux -Py -Ss -i script1.sqlisql -Ux -Py -Ss -i script2.sqlisql -Ux -Py -Ss -i script3.sql.....isql -Ux -Py -Ss -i scriptN.sqlAll scripts are in the same location, which could be made visible toby the SQL Server itself (so either a client-based or a server-basedinvokation is ok)TIA
View 6 Replies View RelatedHi All
I have been asked by developers if there is any advantage in processing multiple clustering models simultaneously by using AMO and multiple threads as against processing one after another.
I have limited experience with Analysis Services but based on my reading I don't see this method providing any advantage.
Does anyone have any recommendations or advice? The system Enterprise Edition running on an x86 Server with 2 dual core processors and 4GB of RAM. Would the answer alter if the server running x64 version of SQL Server and Windows.
Thanks
Nadreck
Happy new year everyone!!!
Ok, now for my not so happy new year problem ... here's the scenario:
I have a simple task of exporting data retrieved by a parameterized stored procedure to a delimited text file ... task done in 30 mins max using dataflow task from OLE DB Source with SQL Command to Text File Destination ... thank you very much SSIS!
But the problem is the OLE DB Source executed the SP MULTIPLE TIMES (3 to be exact)
Actually configuration is:
1. OLE DB Source
2. SQL Command access mode
3. The following command written in the command text box:
SET FMTONLY OFF;
exec sp_SampleSP @param1=?, @param2=?
4. Configured parameter mapping.
The stored procedure logs to a database table everytime it is executed to report how many rows were selected (please don't crucify me with this method, i'm re-using procs from old system). The log shows that during execution of this package the SP was executed on 3 times.
Help anyone? Please ...
Hi,
Can we execute multiple instances of the same SSIS package simultaneously??
If yes, how?
If no, what is the work-around to simulate such a functionality?
Thanks in advance.
Regards,
B@ns
Hello all -
Based on advice from this board, I am setting up our newly-converted DTSX packages (sql server 2000 (DTS) to 2005 (SSIS) package conversion) to utilize package configurations to make it easier to run them in multiple environments (dev, testing, production, etc...). This seems to be working just fine, but I now have another question.
We have approximately 12 DTSX packages which need to be executed in a specific sequential order. I was wondering what the best / most widely accepted method is to allow for running them as an automated process. If you double click on each DTSX file individually, the "Execute Package Utility" pops up, and you can run the package. I'd like to know the best way for us to be able to run each package, one after the other (each one waiting until the previous one completes before it begins), until they have all processed. It would be nice if it did not rely on SQL Server being installed on the machine on which it is being run...
thanks for all the fantastic support on this site
Hi Friends,
How do I display a bar graph in my main report? I dont want it to be displayed on separate page. When I click on some entities on my main report, a graph should be popped up in the same report in some corner? how do I do that ? Please let me know.
Thanks & Regards
Naveen J V
Hi all,
I have created a report that everyone is happy with.
My dataset (simplified) looks like this:
SELECT *
FROM FamilyMember
WHERE QuestionnaireID = @QuestionnaireID
Now, instead of running individual reports the users want to run several reports on a list of QuestionnaireID's.
I thought something like this would work:
SELECT *
FROM FamilyMember
WHERE QuestionnaireID IN (@QuestionnaireID)
but RS complains about converting '152,153' to an INT.
Is there a way to accomplish this?
I am guessing I need to convert the nvarchar @QuestionnaireID to a real list of INTs but am unsure how to do this...
Does anyone know of a way to execute sql code from a dynamically builttext field?Before beginning, let me state that I know this db architecture isbuilt solely for frustration and I hope to make it better soon.Unfortunately, there is never a non-crucial time in which we can do anupgrade, so we are stuck for now.Point 1:There are multiple tables: students, courses, cross-referencestudent/courses, teachers, cross-reference teacher/courses, andothers.Point 2:Yearly archiving is done by appending a 2 digit year suffix to thetable and rebuilding the table structure for the current year. Thatis, each of the tables named above has an archive table for 1999,2000, 2001, etc. This leads to many tables and a big mess whenunioning them.Point 3:A history report is run by building a big query that unions each unionof tables (students, courses, etc) by year. This query has grown toobig for a varchar(8000) field. Actually, it's too big for 2 of them.Point 4:I don't want to write code to maintain any more varchar(8000) fieldsfor this query. It should be much more easily handled with atemporary table holding each bit of yearly archive data. I have builtthis and it works fine. I have also figured out how to pull the rowsfrom that table, concatenate them, and insert the resulting lump intoa text field in another table.Point 5:I haven't figured out how to grab the 5 or so records from that tableand execute them on their own. I figured I could grab them, put theminto a text field that's big enough to hold the whole query and thenselect and execute that text field. I've had no luck with that and Ihaven't had any luck finding any references that might help me withthis problem. I keep thinking of nesting execute() calls, but thatdoesn't work.I'm open to questions, potential solutions, hints about different wayto approach the problem, anything.Many thanks in advance,Rick Caborn
View 7 Replies View RelatedHI,
i am a new to SSRS and i am facing a problem with Ad Hoc reporting.
actually i wanted to create a report with data from two different table. now its the relation between these two tables that is not allowing me to create a req. adhoc report.
i want the report to have data from table A and table B and the relationship between A and B is many-to-many. so in the database design i have an associate table C between A and B. so in .dsv file i have C related to A as one-to-many and C related to B as one to many.
Now here how do i get data from both table A and table B?
I have a report that I pass parameters of a clientID. I run the report and export it to a .pdf file. I would like to be able to do this for multiple clients without manually having to enter the ID each time and exporting it.
I have thought about creating a report that calls this report so that I can pass in the clientID one at a time. The problem is trying to export each one.
Does anyone have any ideas? Thanks in advance!
Hi,
Can we share and schedule whole report folder(not just one report) by using management studio?
Thanks
I have a data set which has more than one record. Iam tyring to create a report without using the wizard. I want the report on multiple pages. I dragged some text boxes on to the design and added the expressions in there. If I run the program now Iam only getting the report with the last record. How do I get the report for all the records in the Dataset on multiple pages ? . I want each record on one page. I am forsure getting more than one record into the Dataset.
Thanks in advace for the help
I am trying to create a logon trigger. As I am testing this, I discovered that each time I do a connection, I get 19 rows, inserted into my audit table. I ran profiler, and I see it is going through the logon trigger multiple times, for a single connection. So, what am I doing wrong? The code is fairly simplistic, and the profiler doesn't give a clue, as to what is going on. When I look at the output, I see the spid for the first couple of connections are different, then a spid, that is different from those 2 is in the next 17 rows. But, when I do an sp_who2, that spid does not exist.
This issue was noticed on a 2012 version, that I was first testing on, then had the same issue on a 2008 R2. I am currently testing on a 2014 version, that is doing the same thing. Is the logon trigger itself, firing, and causing this?
I also tried using the After Logon option, and got the same issue.
Here is the code:
CREATE TRIGGER LogonAuditTrigger
ON ALL SERVER WITH EXECUTE AS 'sa'
FOR LOGON
AS
BEGIN
DECLARE @Body NVARCHAR(2000),
[code]....
Hi,
I have created bunch of reports using SSRS. Now I want to deliver all of these reports together. I can use data driven subscription in Report Manager. But that feature allows to deliver one report at a time. Can anyone tell me how to deliver all reports together?
Requirement is reports should be delivered to dirrent departments. These reports have parameterized. Can anyone tell me how to do this? at least if somebody provides sample codes I really appriciate.
Thanks
p/s ;
I found this one on MSDN. But I'm not sure whether I can change this and use for multiple reports subscription. I dont hv a good knowledge on C# or VB. Please can anyone help me to modify this? I think we can use a loop or smthing.
http://msdn2.microsoft.com/en-us/library/microsoft.wssux.reportingserviceswebservice.rsmanagementservice2005.reportingservice2005.createdatadrivensubscription.aspx
I'm looking for some advice on how to manage reports that use the same query in their datasets. I have multiple reports that use several datasets that are the same. If I need to make a change to one dataset, I need to remember to update the other datasets. Of course I don't always remember to do that!
Is there a way to create a dataset in a single location and then share it? I was thinking of using a View but I don't think it'll accept the parameters.
I've been cutting & pasting the entire query as I make change but I'm afraid it'll mess that up or forget to update a dataset.
How do you do it?
Any suggestions you have would be helpful.
Rob
I'm new to developing reports using 2005 SQL Reporting Services. Is it possible to develop reports based on more than one database, (generally MS SQL)? I need to set up a dataset that includes tables from several different databases linked together so that information can be viewed together in one report.
thanks
We have timed-based subscriptions set up for our standard set of 10 client
reports which run monthly with the appropriate parameters set for each
of our clients. Our management has requested that we provide them with
the ability to run the set of 10 reports together at will. So we would
provide the client parameter and all 10 reports would be generated.
What is the recommended approach to accomplish this? We are using Sql
Server 2005, Visual Studio 2003 and .Net 2.0.