Executing A Stored Proc From DTS Package
Oct 1, 2005
My current task in my company is...
I got a Spreadsheet from which i have to get the data into a "Staging Table" and from there the data has to go into 10 different Tables in my database..
I had created a DTS package using ActiveX script and written a Stored Proc to get the records from Staging table to Database tables...every thing is working fine... but...
they asked me to send "TapeType' and "DealName" into two fields and "current datetime" into one more field of the stagingtable fields which are not present inthe Spreadsheet....
so in the Activex script i hard coded... destination"TapeType"= "BidTape" and destination"DealName"= "ABCD" and its working...
and for currentdate i had defined a DTS Task and in that i had written a SQL stmts..
update table....
set currentdate = getdate()
where TapeType = 'BidTape' ..... which is also working....but the problem is
if i got one more spread sheet with same "TapeType" i.e. BidTape but with different "DealName" i.e. "XYZ".... every thing is working out but....the Currentdate field is getting updated every where with as one date..???
can u suggest me a better solution here.....
and after this Iam planning to create one more Task to Execute the Proc..... but I have to pass 2parameters i.e. "Dealname" and "TapeType"... they want every thing to be get done with single mouse click...
can u suggest me here how to pass these 2parameters in the DTS package,..
I will be waiting for any one your valuable suggestions....
View 3 Replies
ADVERTISEMENT
Mar 25, 2005
Hi All,
I have stored proc that processes about 60,000 rows using a cursor. When I call the SP from Query Analyzer, I get the following error message after processing about 12,000 records :
Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionRead (InvalidParam()).
Server: Msg 11, Level 16, State 1, Line 0
General network error. Check your network documentation.
ODBC: Msg 0, Level 16, State 1
Communication link failure
Connection Broken
12614 records
What can i do to make this SP run sucessfully ? I even tried using a table variable instead of a cursor, but got the same result.
THE output from SP_CONFIG is
Option config_value
----------------------------------------------------------------------------------------------------------------------------------
affinity mask
0
allow updates
0
awe enabled
0
c2 audit mode
0
cost threshold for parallelism
5
Cross DB Ownership Chaining
0
cursor threshold
-1
default full-text language
1033
default language
0
fill factor (%)
0
index create memory (KB)
0
lightweight pooling
0
locks
0
max degree of parallelism
0
max server memory (MB)
2147483647
max text repl size (B)
65536
max worker threads
255
media retention
0
min memory per query (KB)
1024
min server memory (MB)
0
nested triggers
1
network packet size (B)
4096
open objects
0
priority boost
0
query governor cost limit
0
query wait (s)
-1
recovery interval (min)
0
remote access
1
remote login timeout (s)
20
remote proc trans
0
remote query timeout (s)
0
scan for startup procs
0
set working set size
0
show advanced options
1
two digit year cutoff
2049
user connections
0
user options
0
View 1 Replies
View Related
Mar 17, 2004
I am trying to execute stored procedures accross a network, which return recordsets. The problem I'm having is as follows:
I need to return the recordset with cursor type adOpenStatic and not adOpenForwardOnly, which is the default when using the execute command. So I decided to use the open cammand instead which seemed to work.
the probelm is that it takes a really long time to process the open command, but the execute is very fast. Does anyone know why this might be?
Here is the code which I am using:
bool SOMEFUNCTION( ..... )
_CommandPtr objCmd = NULL;
objCmd.CreateInstance(__uuidof(Command));
bool retval = true;
try
{
objCmd->ActiveConnection = connection;
objCmd->CommandText = "sp_as_played_list";
objCmd->CommandType = adCmdStoredProc;
recordset->CursorLocation = adUseClient;
// WORKS VERY SLOWLY - get to have Static cursor
recordset->Open( (IDispatch *)objCmd, vtMissing, adOpenStatic, adLockReadOnly, adCmdStoredProc );
// Or - WORKS VERY QUICKLY - adOpenForwardOnly default cursor
recordset = objCmd->Execute( NULL, NULL, adCmdStoredProc);
if(recordset->State == adStateClosed)
{
retval = false;
}
thanks
aidan
View 1 Replies
View Related
May 7, 2008
I have a database trigger that is set to call a CLR trigger/stored proc when a certain field in a table is updated. The issue is that if i execute the stored proc manually in enterprise studio, it works perfectly but the same call made through the trigger does not go through. A few more details -
I have CLR integration enabled on the sql server.
The dbo has UNSAFE ASSEMBLY rights
I have the both the assembly and the serialized dll imported in the database.
Here's the definition of the stored proc -
CREATE PROCEDURE [dbo].[WriteXMLNotification]
@TaskID [nvarchar](20)
WITH EXECUTE AS CALLER
AS
EXTERNAL NAME [DataInterfaceWebServices].[TaskUpdateXMLWriter.WriteXMLNotification].[run]
and the trigger -
CREATE TRIGGER [dbo].[tr_Task_U]
ON [dbo].[_Task]
FOR UPDATE, INSERT AS
IF UPDATE (TaskType_Status) OR UPDATE (TaskType) OR UPDATE (TaskType_SubType1)
BEGIN
SET NOCOUNT ON;
DECLARE @status AS INT
DECLARE @taskType AS INT
DECLARE @taskSubType AS INT
DECLARE @taskID as sysname
DECLARE @cmd as sysname
DECLARE @parentTask as sysname
DECLARE @NotificationXMLTaskID as sysname
SELECT @status = [TaskType_Status] FROM inserted
SELECT @taskType = [TaskType] FROM inserted
SELECT @taskSubType = [TaskType_SubType1] FROM inserted
SELECT @taskID = [TaskID] FROM inserted
SELECT @parentTask = [Parent_TaskID] FROM inserted
SELECT @NotificationXMLTaskID = [MCCTaskID] FROM _TaskNotificationXML WHERE [MCCTaskID] = @parentTask
IF (@status = 2602) AND (@taskType = 2282) AND (@taskSubType = 19500)
BEGIN
exec WriteXMLNotification @taskID;
END
ELSE IF (@taskType = 2285) AND (@parentTask IS NOT NULL) AND (@NotificationXMLTaskID IS NOT NULL)
BEGIN
exec WriteXMLNotification @parentTask;
END
END
I stepped into the trigger and it seems to execute the line " exec WriteXMLNotification @taskID;" but nothing happens, but if I run that same line manually, it works. Could it be that the impersonation by the EXECUTE AS clause is causing it to fail?
Please advise!
Thanks in Advance,
-Mihir Sonalkar.
View 1 Replies
View Related
Jul 27, 2004
We have a stored procedure that will return at most about 600 records. In almost all cases it works fine, but in a few odd cases the command times out when used from a webform. We changed the CommandTimeout property to 120 seconds... no difference. If we run a query that times out in Query Analyzer, it runs in under 3 seconds (on the SQL Server machine). We also did a lot of profiling, and for any page that runs fine, the query takes about the same time when called from a webform and run in the Query Analyzer.
We ran our tests on the pre-production environment with absolutely no one else on the machines. We also created a test page that just fills a DataSet. Straightforward... get connection object, create command, set params, create data adapter, fill dataset. It suffers the same problem.
The web server and SQL server are two separate machines. Oh, and before I forget... This is SQL 2000. It used to run SQL 7, and all the queries there were (slightly) slower, but none timed out, not even the ones that do now.
Maybe the first question should be:
How can it be that a query that runs fine in Query Analyzer times out from a webform?
View 8 Replies
View Related
Jul 20, 2005
Ok, I thought this one would be easy.I have a stored proc: master.dbo.restore_database_fooThis is on database server B.Database server A backs up database foo on a daily basis as a scheduledtask.What I wanted to do was, at the end of the scheduled task is then call thestored proc on B and restore the database.If I go into Query Analyzer and log into database A, then execb.master.dbo.restore_database_foo works.But if I take the same command and make it part of the scheduled task itfails.Error is:OLE DB provider 'SQLOLEDB' reported an error. [SQLSTATE 42000] (Error 7399)[SQLSTATE 01000] (Error 7312). The step failed.To me this seems like a permissions issue, but nothing I've tried seems tohave helped.Suggestions?----Greg D. MoorePresident Green Mountain SoftwarePersonal: http://stratton.greenms.com
View 3 Replies
View Related
Jul 30, 2007
I need to loop the recordset returned from a ExecuteSQL task and transform each row using a Data Conversion task (or a Script Task).
I know how to loop the recordset returned by an ExecuteSQL task:
http://www.sqlis.com/59.aspx
I loop the returned recordset (which is mapped to a User variable of type System.Object) and assign the Variable Mappings in the ForEach Loop to different user variables which map to the Exec proc resultset (with names and data types).
I assume to now use these as the Available Input columns for the Data Conversion task, I drag a Data Flow task inside the For Each Loop container and double-click it, then add a Data Conversion task.
But the Input columns (which I entered in the Variable Mappings in the ForEach Loop containers) dont show up in the Available Input columns of the Data Conversion task.
How do I link the Variable Mappings in the ForEach Loop containers from the recordset returned by the Execute SQL Task to the Available Input columns of the Data Conversion task?
.......................
If this is not possible, and the advice is to use the OLEDB data flow as the input for the Data Conversion task (which is something I tried too), then the results from an OLEDB Command (using EXEC sp_myproc) are not mapped to the Available Input columns of the Data Conversion task either (as its not an explicit SQL Statement and the runtime results from a stored proc exection)
I would like to use the ExecuteSQL task to do this as the Package is clean and comprehensible. Which is the easiest best way to map the returned results from a Stored proc execution to the Available Input columns of any Data Flow transformation task for the transform operations I need to execute on each row of data?
[ Could not find any useful advice on this anywhere ]
thanks in advance!
View 4 Replies
View Related
May 24, 2006
In SQL Server 2005 I need a stored procedure that will execute an SSIS Package for me. There is some earlier stuff on the board but I don't understand it. I don't want to create a Job to do it if I don't have to.
Thanks,
George Cooper
View 3 Replies
View Related
Mar 8, 2006
Hey guys,
I've got a problem here. I need to send the query result to a csv file then transfer the file to a website. I thought this is a good candidate for a SSIS package. The package is ready now but I don't know how can I execute it from within a stored procedure.
I thought sp_OA family of extended procedure would be helpfull. After following steps:
EXEC @hr1 = sp_OACreate 'DTS.Package', @oPKG OUT
EXEC @hr1 = sp_OAMethod @oPKG, 'LoadFromSQLServer("foo", ,, 256, , , , "foo1")', NULL
EXEC @hr1 = sp_OAMethod @oPKG, 'exec'
EXEC @hr1 = sp_OADestroy @oPKG
it tells me command execute successfully. But no package actually gets executed and I can see no results
Thanks
View 1 Replies
View Related
Mar 28, 2006
Hello everybody,
I can't find any posts concerning this error. While executing the stored package (using Execute Package Utility). I get error: SSIS Execution Properties "Could not load package "File Systemmigration_package_1" because of error 0x80010112." The package is there and it was correctly loaded.
Please can anybody suggest what do do now or some workaround?
Thank you for any suggestions
Patrik Svestka
View 1 Replies
View Related
Mar 11, 2008
Hi,
I have an ssis package which reads a file and upload the data into a table.
Im executing this package through Stored procedure through dtexec /F command
If im uploading this file from local machine the package is executing and the data is uploaded to the table.
If it is in network and try to upload it will through an error that can't upload the file..
I have also shared the file on the network.
Can anyone help
View 9 Replies
View Related
Jan 26, 2005
Good day all! :cool:
I have a DTS package that consists of 2 tasks, one empties a table(1) to receive data from a transformation task(2)...
I found 'code' for a stored procedure to run a DTS package.. problem is that it is only running the first task... I need it to run the whole she-bang!
Anyone know how to do this?
Here is the stored proc:
/************************************************** **************************************/
/* Filename: spExecutePKG.sql*/
/* Description:Execute DTS Packages via sp_OAxxxx*/
/* Created:Darren Green 200006013*/
/************************************************** **************************************/
if exists (select * from sysobjects where id = object_id(N'[dbo].[spExecutePKG]') and OBJECTPROPERTY(id, N'IsProcedure') = 1)
drop procedure [dbo].[spExecutePKG]
GO
CREATE PROC spExecutePKG
@Server varchar(255),
@PkgName varchar(255), -- Package Name (Defaults to most recent version)
@ServerPWD varchar(255) = Null,-- Server Password if using SQL Security to load Package (UID is SUSER_NAME())
@IntSecurity bit = 0,-- 0 = SQL Server Security, 1 = Integrated Security
@PkgPWD varchar(255) = ''-- Package Password
AS
SET NOCOUNT ON
/*
Return Values
- 0 Successfull execution of Package
- 1 OLE Error
- 9 Failure of Package
*/
DECLARE @hr int, @ret int, @oPKG int, @Cmd varchar(1000)
-- Create a Pkg Object
EXEC @hr = sp_OACreate 'DTS.Package', @oPKG OUTPUT
IF @hr <> 0
BEGIN
PRINT '*** Create Package object failed'
EXEC sp_displayoaerrorinfo @oPKG, @hr
RETURN 1
END
-- Evaluate Security and Build LoadFromSQLServer Statement
IF @IntSecurity = 0
SET @Cmd = 'LoadFromSQLServer("' + @Server +'", "' + SUSER_SNAME() + '", "' + @ServerPWD + '", 0, "' + @PkgPWD + '", , , "' + @PkgName + '")'
ELSE
SET @Cmd = 'LoadFromSQLServer("' + @Server +'", "", "", 256, "' + @PkgPWD + '", , , "' + @PkgName + '")'
EXEC @hr = sp_OAMethod @oPKG, @Cmd, NULL
IF @hr <> 0
BEGIN
PRINT '*** LoadFromSQLServer failed'
EXEC sp_displayoaerrorinfo @oPKG , @hr
RETURN 1
END
-- Execute Pkg
EXEC @hr = sp_OAMethod @oPKG, 'Execute'
IF @hr <> 0
BEGIN
PRINT '*** Execute failed'
EXEC sp_displayoaerrorinfo @oPKG , @hr
RETURN 1
END
-- Check Pkg Errors
EXEC @ret=spDisplayPkgErrors @oPKG
-- Unitialize the Pkg
EXEC @hr = sp_OAMethod @oPKG, 'UnInitialize'
IF @hr <> 0
BEGIN
PRINT '*** UnInitialize failed'
EXEC sp_displayoaerrorinfo @oPKG , @hr
RETURN 1
END
-- Clean Up
EXEC @hr = sp_OADestroy @oPKG
IF @hr <> 0
BEGIN
EXEC sp_displayoaerrorinfo @oPKG , @hr
RETURN 1
END
RETURN @ret
GO
View 3 Replies
View Related
Jan 19, 2004
how can a go about running a stored proc when my dts package is finished running?
View 2 Replies
View Related
Aug 16, 2000
Do you know, if there are any ways to start DTS package from the stored procedure?
Thank you,
Anastasia
View 2 Replies
View Related
Jul 20, 2005
I'm a rookie with MSSQL. I need to run a DTS package to export a result setto an MX Excel spread sheet. I need to call the DTS from a stored procedureand pass it three values, depending on the input parameters to the storedproc.DTS package is no problem. Pretty easy with the DTS wizard. My problem isthat I can't figure out how to instansiate the DTS package object from astored proc and pass the three values as parameters to the DTS package sothey can populate the parameters I created in it.I found an article related to it, but I'm too much of a rookie to grasp it.It showed how to do this from a stored procedure:EXEC @hr = sp_OASetProperty @oPKG, 'GlobalVariables("MyGVName").Value,'MyGVValue'IF @hr <> 0BEGINPRINT '*** GlobalVariable Assignment Failed'EXEC sp_displayoaerrorinfo @oPKG, @hrENDI have three values and tree global variables to populate. Do I need to dothe above 3 times?How do I instantiate the package object? I've read up some on sp_OACreate,but I don't get it, yet.How do I initiate the variable @oPKG?It contains the name of the sp_OACreate string, right? How do I address aDTS package in the sp_OACreate string?I would really appreciate just writing out the sp_OACreate string and how Ipass values for three existing global variables to a DTS package named"DTS_1".I'm under some real pressure to get this done.Thanks for any help I can get.Gunny
View 1 Replies
View Related
Jul 7, 2006
is there a way to execute SSIS Package through stored proceedure.
Or any other method of executing the SSIS Package command line in stored proceedure
Thanks,
jas
View 10 Replies
View Related
Jul 23, 2014
I am using Excel VBA to run a stored procedure which executes a package using the built-in SQL Server stored procedures. The VBA passes two values from excel to the stored proc., which is then supposed to pass these "parameters" to the package to use as a variable within the package.
@Cycle sql_variant = 2
WITH EXECUTE AS 'USER_ACCOUNT' - account that signs on using windows authentication
AS
BEGIN
SET NOCOUNT ON;
declare @execution_id bigint
[code]....
When I try to execute the package, from SQL Server or Excel using the Macro I built, I get the following error:"The parameter '[User::Cycle]' does not exist or you do not have sufficient permissions." I have given the USER_ACCOUNT that runs executes the stored procedure permission to read/write to the database and the SSIS project folder.
View 4 Replies
View Related
Apr 16, 2007
Hi all,
I have created an SSIS package with protection level - EncryptSensitiveWithUserKey. It is running alright from Visual Studio Environment but i need to call the package from an application, so i created a stored proc to call it, but getting the following error while running the stored proc:
Error: 2007-04-16 17:55:05.78
Code: 0xC0016016
Source:
Description: Failed to decrypt protected XML node "DTSassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that
the correct key is available.
End Error
any solution?
View 1 Replies
View Related
Aug 6, 2007
My Package Exist in
C:WROXWROXinexcel_database package exist
OR sql server agent ->job-> excel_database package exist
now i want to excute the from master database how please send the
stored procedure code
Regards
koti
View 1 Replies
View Related
Oct 24, 2007
Hi,
I have a package that I need to loop (possibly multiple times) based on a return value from a stored procedure.
I know that in DTS you could use the return value of "execution status" to do this.
Is there a way in SSIS to loop based on a return value?
Thanks much
View 5 Replies
View Related
Jun 11, 2015
We are executing a SSIS package using a xp_cmdshell command in a SP as shown below. This package does consumes time to execute almost 90 minutes and does get executed successfully too. But the strange thing is we don't get the result in @result variable just because somehow the next sql statement after the below highlighted statement doesn't get executed at all. After checking execution stats for the SP using the query attached below we observed that somehow the SP vanishes out of the execution stats for the server.
SELECT @cmd = 'dtexec /FILE "D:Program FilesMicrosoft SQL Server100DTSPackages.....PopulateReport.dtsx"'
SELECT @cmd = @cmd + ' /Decrypt T@!0er '
SELECT @cmd = @cmd + ' /set package.variables[vAppID].Value;' + CONVERT(VARCHAR(10),@appId)
SELECT @cmd = @cmd + ' /set package.variables[vDBName].Value;' + '"' + @db + '"'
SELECT @cmd = @cmd + ' /set package.variables[vBuildMFF].Value;' + CONVERT(VARCHAR(10),@BuildMFF)
[code]....
View 6 Replies
View Related
Feb 13, 2008
I am working with a large application and am trying to track down a bug. I believe an error that occurs in the stored procedure isbubbling back up to the application and is causing the application not to run. Don't ask why, but we do not have some of the sourcecode that was used to build the application, so I am not able to trace into the code.
So basically I want to examine the stored procedure. If I run the stored procedure through Query Analyzer, I get the following error message:
Msg 2758, Level 16, State 1, Procedure GetPortalSettings, Line 74RAISERROR could not locate entry for error 60002 in sysmessages.
(1 row(s) affected)
(1 row(s) affected)
I don't know if the error message is sufficient enough to cause the application from not running? Does anyone know? If the RAISERROR occursmdiway through the stored procedure, does the stored procedure terminate execution?
Also, Is there a way to trace into a stored procedure through Query Analyzer?
-------------------------------------------As a side note, below is a small portion of my stored proc where the error is being raised:
SELECT @PortalPermissionValue = isnull(max(PermissionValue),0)FROM Permission, PermissionType, #GroupsWHERE Permission.ResourceId = @PortalIdAND Permission.PartyId = #Groups.PartyIdAND Permission.PermissionTypeId = PermissionType.PermissionTypeId
IF @PortalPermissionValue = 0BEGIN RAISERROR (60002, 16, 1) return -3END
View 3 Replies
View Related
Jan 24, 2008
Hi,
I have a web application using Stored Procedure (SP). I see that there's a SP taking long time to execute. I try to capture it by Profiler Tool, and find out that with the same SP on the same db with the same parameter. The duration of executing by my web app is far bigger than the duration of executing on SQl server management studio - query window
Please see the image through this url http://kyxao.net/127/ExecutionProblem.png
Any ideas for this issue?
Thanks a lot
View 1 Replies
View Related
Jan 23, 2008
Hi,I have a web application using Stored Procedure (SP). I see that there's a SP taking long time to execute. I try to capture it by Profiler Tool, and find out that with the same SP on the same db with the same parameter. The duration of executing by my web app is far bigger than the duration of executing on SQl server management studio - query windowPlease see the image attached http://kyxao.net/127/ExecutionProblem.png Any ideas for this issue?Thanks a lot Jalijack
View 2 Replies
View Related
Jan 12, 2008
Hello,
I am trying to use an Execute SQL Task to execute a stored procedure with parameters in SSIS but it keeps giving me errors, for example I type in 'exec someproc ?, ?, ?' in SQL Task it wouldnt parse correctly and when I set the bypassPrepare to 'true' the package runs but gives me error at the destination saying couldnt find stored procedure 'someProc'.
Does anybody know how I can solve this problem?
Also how do I pass the results of the queries in the Execute SQL Task into the Data Flow Task? The proc is supposed to retrieve data and transform them into XML format to be placed at a XML file. I am not sure if I should used an OLEDB source or an XML source since the data has been transformed into XML. Any help will be greatly appreciated.
Please note proc runs fine when it does not have any parameters.
View 8 Replies
View Related
Feb 2, 2007
Hi,
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
View 1 Replies
View Related
Feb 2, 2007
Hi,
I am planning to develop a single package that will download files from ftp server, move the files to internal file server and upload it in the database. But I want to run this package for multiple ftp file providers. For each provider the ftp server might be different and the transformation to upload the files into a database table might be different.
So can I create a single package and then multiple configuration files (xml), which will contain the details fo the ftp file providers and then pass the xml file as a parameter while executing the package. The reason being that the timings of fetching the files is different for each ftp file provider and hence cannot be combined into one.
Is this possible?
Thanks for your help.
$wapnil
View 6 Replies
View Related
Jun 3, 2014
I would like to fetch the data flow component name while package is executing. Since system variable named [System::SourceName] only fetches name of the control flow tasks? Is there a way to capture them?
View 5 Replies
View Related
Aug 24, 2006
I am having trouble executing a stored procedure on a remote server. On my
local server, I have a linked server setup as follows:
Server1.abcd.myserver.comSQLServer2005,1563
This works fine on my local server:
Select * From [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.dbo.TableName
This does not work (Attempting to execute a remote stored proc named 'Data_Add':
Exec [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.Data_Add 1,'Hello Moto'
When I attempt to run the above, I get the following error:
Could not locate entry in sysdatabases for database 'Server1.abcd.myserver.comSQLServer2005,1563'.
No entry found with that name. Make sure that the name is entered correctly.
Could anyone shed some light on what I need to do to get this to work?
Thanks - Amos.
View 3 Replies
View Related
Jun 15, 2006
Hi All,Quick question, I have always heard it best practice to check for exist, ifso, drop, then create the proc. I just wanted to know why that's a bestpractice. I am trying to put that theory in place at my work, but they areasking for a good reason to do this before actually implementing. All Icould think of was that so when you're creating a proc you won't get anerror if the procedure already exists, but doesn't it also have to do withCompilation and perhaps Execution. Does anyone have a good argument fordoing stored procs this way? All feedback is appreciated.TIA,~CK
View 3 Replies
View Related
Feb 23, 2007
I have an ASP that has been working fine for several months, but itsuddenly broke. I wonder if windows update has installed some securitypatch that is causing it.The problem is that I am calling a stored procedure via an ASP(classic, not .NET) , but nothing happens. The procedure doesn't work,and I don't get any error messages.I've tried dropping and re-creating the user and permissions, to noavail. If it was a permissions problem, there would be an errormessage. I trace the calls in Profiler, and it has no complaints. Thedatabase is getting the stored proc call.I finally got it to work again, but this is not a viable solution forour production environment:1. response.write the SQL call to the stored procedure from the ASPand copy the text to the clipboard.2. log in to QueryAnalyzer using the same user as used by the ASP.3. paste and run the SQL call to the stored proc in query analyzer.After I have done this, it not only works in Query Analyzer, but thenthe ASP works too. It continues to work, even after I reboot themachine. This is truly bizzare and has us stumped. My hunch is thatwindows update installed something that has created this issue, but Ihave not been able to track it down.
View 1 Replies
View Related
Nov 16, 2004
Hello,
I have a web application that I kick off a DTS package. I tested the package and it works fine. However, when running the package through ASP.NET, I get the following error:
Type mismatch. (mscorlib (80004005): Missing parameter does not have a default value. Parameter name: parameters)
I've traced it to a dynamic task step. I have this as the first step in the workflow, but for some reason, it is executing last. Which is definitely not the place where I want it. Is there anyway I can force it, or why is it doing that?
Any ideas?
Brian
View 2 Replies
View Related
Dec 27, 2006
Hi Friends
I am trying to execute the DTS package from the T-Sql
Its basically Exporting the table from Sql Server to tab delimited text file
DECLARE @Command varchar(1000)
declare @partcode varchar(100)
set @command = 'DTSRun /S "servername" /U "username" /P "password" /N "TabFormat" /G "{459784D8-0170-400C-8919-AC25423D7F34}" /W "0" '
EXEC master..xp_cmdshell @Command
It Comes up with the Following Error
output
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
DTSRun: Loading...
DTSRun: Executing...
DTSRun OnStart: DTSStep_DTSDataPumpTask_1
DTSRun OnError: DTSStep_DTSDataPumpTask_1, Error = -2147467259 (80004005)
Error string: Error opening datafile: The system cannot find the path specified.
Error source: Microsoft Data Transformation Services Flat File Rowset Provider
Help file: DTSFFile.hlp
Help context: 0
Error Detail Records:
Error: 3 (3); Provider Error: 3 (3)
Error string: Error opening datafile: The system cannot find the path specified.
Error source: Microsoft Data Transformation Services Flat File Rowset Provider
Help file: DTSFFile.hlp
Help context: 0
DTSRun OnFinish: DTSStep_DTSDataPumpTask_1
DTSRun: Package execution complete.
NULL
(22 row(s) affected)
Vic
View 5 Replies
View Related
