Hi Everyone:
Is it possible to create a package through the SQL Server Business Intelligence Studio, and then execute that package through an Excel file (by calling the package through VBA?).
I need some advice on the ways I can execute the package other than via command line utilities. Can you use Visual Basic 6.0? .NET?
Please advise,
Jason
I've put together a SSIS package that, once a user uploads an Excel spreadsheet from a webpage, grabs it, does a mess of calculations and spits it out into a datareader (this last part is tricky, but I haven't even gotten to this point yet). In BIDS, the package works fine. Run using the 32-bit version of dtexec, it runs fine. But when I try to call it from the page, I keep getting an error. The errors look familiar enough that I'm thinking it's due to the package trying to run 64-bit, and that not playing nicely with Excel. If that's true, is there an easy way to force the 32-but version to be used? I've already set the project properties to Run64BitRuntime = false, which I'd hoped would help. but no luck.
Here's the code I'm using:
Code Snippet
string pkg = @"pathpackage.dtsx";
Application app = new Application();
Package p = app.LoadPackage(p, null);
Variable varFileName = p.Variables["strExcelFileName"];
varFileName.Vaue = strFileName;
Variable varFilePath = p.Variables["strExcelFilePath"];
varFilePath.Value = strFilePath;
DTSExecResult dte = p.Execute();
Error handling
p.Dispose();
And it kicks out the following:
-1071636471
TestReports_UploadTestReport
Connection manager "Excel Connection Manager"
Microsoft.SqlServer.Dts.Runtime.DtsError0{8BDFE898-E9D8-4D23-9739-DA807BCDC2AC}
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
-1071611876
DFT - Upload spreadsheet to dataset
Excel Source [1]
Microsoft.SqlServer.Dts.Runtime.DtsError0dtsmsg.rll{8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
-1073450985
DFT - Upload spreadsheet to dataset
DTS.Pipeline
Microsoft.SqlServer.Dts.Runtime.DtsError0dtsmsg.rll{8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}
component "Excel Source" (1) failed validation and returned error code 0xC020801C.
-1073450996
DFT - Upload spreadsheet to dataset
DTS.Pipeline
Microsoft.SqlServer.Dts.Runtime.DtsError0dtsmsg.rll{8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}
One or more component failed validation.
-1073594105
DFT - Upload spreadsheet to dataset
Dear all,
I wrote this post others times but the answer did not satisfied so that I'd like to know if really anyone has ever used or experienced with this possibility. No by .Net language rather than Vb 6.0 or ASP or even instanciacing DMO library.
According this link http://support.microsoft.com/?kbid=817248 it seems possible but I haven't idea if possible keeping in mind that it has been made by yourself no for others... So that, I mean, these assemblies comes along with Sql Server 2005 installation.
Thanks a lot for your support,
Hi,
I created a SSIS Package programatically based on the few threads here in this forum. This package just has a data flow task, during data transfer for every 1000 rows or so I want to update the status in a table in the database.
How do I achieve this?
As of now I just have a source and a destination, no transformations in between the flow. I'm not sure if rowcount will help, when I tried it using a onprogress even handler it always showed up as zero.
Thanks
Hi,
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
I would like to fetch the data flow component name while package is executing. Since system variable named [System::SourceName] only fetches name of the control flow tasks? Is there a way to capture them?
View 5 Replies View RelatedI want to achieve the following in (SSIS/SSDT for SQL 2012) -Â
I have a generic SSIS package which simply sends out email notifications using SMTP email task (this package is within its own project, and has project level input parameters).
I need to be able to call this package in the Event handler section of every package (numbering in about less than 60) that we have. These packages are within their own respective projects.
I thought I could use the "execute package task", but it turns out , using this, I cannot call a package that is part of some other project. I also cannot call a package that is stored in the CATALOG. Is there any way I can do this ?
When I call the child package , I should be able to send in parameters like - error information and package name of the Parent package.
Hi,
In our project we have two SSIS package.
And there is a task (Execute SSIS package) in First package that calls the execution of second package.
I m continuously receiving an error "Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available."
As we are running first package by job, job runs successfully logging above error
The protection level of second package is set to "EncryptSensitiveWithUserKey"
Can anybody please suggest how to handle it?
Hi All,
I hav a strange problem. I created a SSIS package on my machine with protection level as "EncryptAllWithPassword".
When I deploy this package on a SQL Server on another machine (either in File System or SQL Server)and add it as a job in SQL Server Agent and try to run it through a scheduler or manually the job fails with the following message -
Executed as user:IBM-P4-1976SYSTEM. The package could not be loaded. The step failed.
However if I deploy it on my own machine the job runs successfully.
Also if I run the package using dtexec utility on the another machine it runs successfully.
It is not running as a job on another machine. All the logged in users have administrative rights. My databases are altogether on a different server.
Can any one help me out with this issue...Pleassssseeee...
Can someone tell me the best way to "automatically" execute a SSIS package. I have approximately 100 computers that I need to execute packages on. Here is the scenario:
I have some text files that are coming from our AS400 to a local computer (the package will NOT be used to bring files from our AS400. I will be using Client Access for that). The text files will be stored in a specified directory on the local computer. I will be importing these text files into a SQL Database on all 100 machines. Once I create the Import Package, what is the best way to execute this package on the devices?
I thought maybe after creating the package, I can put an EXE on the desktop that will execute the SSIS package. This way all I would have to do is click a icon on the desktop. I don't know if this is feasible or not. After building a package, do you make it a EXE or what? Pease advise. Thank in advance.
Hi again
First I explain my environment:
- SSIS Packages are stored on 64bit Server (Win 2003 64bit, SQL 2005 64bit)
- .NET (C#) application (on Win 2003 32bit Server) which loads and executes the SSIS Packages.
I can execute my SSIS Package localy on the 64bit Server and they work fine.
When I execute the SSIS Package from the Application I get following exeption:
Retrieving the COM class factory for component with CLSID {697AC67E-FDD5-46D1-90D7-F3D0DF1B2A47} failed due to the following error: 80040154. ...
at Microsoft.SqlServer.Dts.Runtime.Package..ctor()
The code looks like:
Microsoft.SqlServer.Dts.Runtime.Package local_Package = new Microsoft.SqlServer.Dts.Runtime.Package();
Microsoft.SqlServer.Dts.Runtime.DTSExecResult local_DTSExecResult = new Microsoft.SqlServer.Dts.Runtime.DTSExecResult();
Microsoft.SqlServer.Dts.Runtime.Application local_Application = new Microsoft.SqlServer.Dts.Runtime.Application();
local_Package = local_Application.LoadFromDtsServer("PackageName", "64bitServer", null);
local_DTSExecResult = local_Package.Execute();
Other question would be: how can I execute a package directly on the server??
I mean without "LoadPackage"?? I guess the problem on top is because on the
32bit Server there is only Framework installed but not Integration Services Tools ...
Would be happy for any comment!
Best regards
Frank Uray
Hi,
I have created a SSIS package through SSIS Tool. Protection Level is 'EncryptSensitiveWithUserKey'. When I execute , it works fine.
I have written a code to execute SSIS package through .net application. When i try in my local PC. The package works fine.
When I deployed in Webserver, it throws an error,
DTS Package: Package1 failed. Error Details as follows. 1. Source : Execute SQL Task Description : Failed to acquire connection "DatabaseConnection ADO.NET". Connection may not be configured correctly or you may not have the right permissions on this connection.
"DatabaseConnection ADO.NET". is a connection which is specified in the SSIS.
Can any one pls tell me how to solve this issue.
Thanks & Regards,
Ganesan
Is it possible to execute an SSIS package from Linux? Before with 2005, we were able to execute a job that would execute the DTS, now we're trying to execute an SSIS package in 2005.
---
"Try not to become a man of success but rather try to become a man of value."
I migrated the DTS package to SSIS package using the migration wizard...
but when i try to execute it it gives the following error plz help ...
error : Error retrieving file name for a component failed with the error code 0x043A1034
any suggestions ...
I have a parent package that calls a child package. When this is executed on SQL server (the actual server host SSIS services) it executes fine I can see data in the correct tables and I can determine that is ran. But I try to run this from my local pc within the designer (Visual Studios) and the parent package runs a few task that are before the child package task but once it gets to the child package it stops. I have set breakpoint on several task with the parent package and I can step thru them but once it gets to the child it tries to run it then the execute package task object turns red. I can not find any error messages or codes. I even have beak points set up on the child package itself and the process never hits those break points but I'm assuming is cause is puking before I get to the child package.
The child package is stored in SQL server and is in MSDB.
I just want to debug the child packages from BIDS or visual studios?
any one know how to debug child packages from BIDS or Visual Studios?
I can if I run the child package by itself but I need to test from end to end ....so within the parent packages which calls a few child packages..
thanks
Is it possible to execute a child package from a parent package ashnchronously.
I have a SQL Server table containing a list of packages to execute. I want to create a master package that will query this table, and execute each of the packages asynchronously.
I've tried using the Execute Package task and also executing packages programtically from a Script task, but these only seem to work synchronously.
I have also seen suggestions about executing packages asynchronously from T-SQL by starting a job, however, I'd rather not have to dynamically create jobs for each package I want to execute.
Any ideas would be welcome. Or even an answer of "No this is not possible".
Thanks in advance
I am trying to execute a ssis package, where a user will be able to excute the package from an ASP page, the user will select a file, this will be the source file for the SSIS package, this will change when ever the package is executed, I was thinking of just using a sqlClient.sqlCommand and editing the command text and excuting it that way, or through a SP, would this be the best solution? Is there a better solution? and if not what would be the SQL command to execute the package, along with editing the variable?
View 4 Replies View Related
While executiing an SSIS package i get the follwoing error:
Executed as user: <User>. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:00:00 PM Error: 2008-03-06 23:00:01.02 Code: 0x00000000 Source: Execute DTS 2000 Package Task Description: System.Runtime.InteropServices.COMException (0x80040427): Execution was canceled by user. at DTS.PackageClass.Execute() at Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.Exec80PackageTask.ExecuteThread() End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:00:00 PM Finished: 11:00:01 PM Elapsed: 0.859 seconds. The package execution failed. The step failed.
The SSIS package contains one "Execute DTS 2000 package" which is written in SQL server 2000. The DTS written in SQL server 2000 and then i made the SSIS package for the same to be executed as "Execute DTS 2000 package" BUt the package execution fails.
I have seen some workaround also for same where it was saying to install some dll files for SQL server 2000 Meta data services. SQL server 200 meta data services is required for running DTS packages in SQL server 2005 server.
I installed that also but still the same error.
I have done all but all in vain.
Your help will be very helpfull since this is the production issues.
Thanks,
Ashok
HI,
I am facing a problem in my packages. Whn I execute them in Visual Studio, it works fine but when I execute as standalone i.e by Cmd or by Double clicking on it, it throw PRODUCTLEVELTOERROR and "This component requires higher version of SSIS". I have SSIS running on my system as service and my SQL version is as below:
Microsoft SQL Server 2005 - 9.00.3186.00 (X64) Aug 11 2007 05:31:24 Copyright 1988-2005 Microsoft Corporation Developer Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2)
I went through some sites and they say the issue is SSIS service not running or Standard version of SSIS. But my SSIS version and ssis service are both fine.
I went through http://msdn2.microsoft.com/en-us/library/ms143761.aspx and as per this it should be working on my system. Can anybody explain the reason why I am getting this error. Also, in one of my components, I am using reflection but this should not be an issue.
Thanks in advance.
Regards
I have a package which reads from a source, does some transformation and then loads into a target table(custom transformation build to handle multiple scenarios for insert/update/delete etc). For couple of packages, I am facing an unusual problem. The package gets stuck after executing for some records. There is no data flow in the buffer. But again, if I stop executing the package and run it again, it runs through fine.
Any idea what could be issue or what particularly I should be looking for in order to debug this issue.
Thanks,
Manish
I have scheduled an SQL Job to run every 15 mins. This runs an SSIS package. But sometimes my package might execute for more than 15 mins. In this case, a second instance of the package would start. I don't want this to happen. So is there any way I can check whether the package is already running before I continue the execution of the same. Right now I am using a mutex to handle this problem. Are there any problems using the mutex and is there a better way to handle this?
Thanks in advance.
Sumesh
Hi,
I am using C# exe to run the SSIS packages. I have placed the SSIS packages in a folder. So everytime i try to execute the SSIS through the exe i get the error "
An OLE DB error has occurred. Error code: 0x80040E4D.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user '[UserName]'.".
While creating the SSIS, i have saved the password. But when i open the SSIS to check I just see that the password field is blank.
Is there any other property which i need to set to keep the password saved forever??
Regards,
I have a SSIS Package that I am executing from a Web service. The SSIS Package is stored as a file. That works fine. In the SSIS package I have one ADO.NET, .Net ProvidersSqlClient Connection. For the Protection Level I have EncryptSensitiveWithUserKey.
My problem comes when I change the Protection Level to EncryptSensitiveWithPassword. Now the SSIS package is throwing an error when trying to connect to the sql database: Login failed for user _ _
I believe my problem is that I don€™t know how to pass the password of the SSIS package from the Web service into the SSIS package.
Below is part of the code for the Web service:
<WebMethod()> _
Public Function LaunchSSISPackage( _
ByVal variableName As String, _
ByVal variableValue As Object) As Integer 'DTSExecResult
Dim packagePath As String
Dim myPackage As Package
Dim integrationServices As New Application
Dim SSISvar As Variable
myPackage = integrationServices.LoadPackage(packagePath, Nothing)
SSISvar = myPackage.Variables.Add(variableName, False, "User", variableValue)
LaunchSSISPackage = myPackage.Execute()
I appreciate your help with this issue I am having. Thank You.
How can I execute an SSIS package from TSQL without using xp_cmdshell?
I have a web-app which calls some SQL which executes my SSIS package (a DTSX file, but stored in the server). But the security policy for my application won't permit me use to xp_cmdshell.
I want to do this:-
DECLARE @returncode int
EXEC @returncode = xp_cmdshell 'dtexec /sq pkgOne"'
Is there another way for executing a Package without going to the command line (e.g. is there some other system stored proc)?
Thanks
In SQL Server 2005 I need a stored procedure that will execute an SSIS Package for me. There is some earlier stuff on the board but I don't understand it. I don't want to create a Job to do it if I don't have to.
Thanks,
George Cooper
Hi,
I have an SSIS package that utilises a 3rd party ftp program to transfer files (over HTTPS). This software stores details in the users profile relating to addresses, user names and password for transfers. As this is the case the Package needs to be executed by the domain user who has the details set in their profile. The package needs to be executed at a scheduled interval - so I have set up an Agent job to do this, and have the the 'Run As' setting, as a proxy which maps to the required domain user.
The package works fine when executing manually when the required user is logged in. If, however, the user is not logged in - ie when the job kicks off at the schecduled time, the file transfer fails. On debugging I can see that the agent job does not load the user's profile -but instead uses the 'Default User' profile.
The job owner is set as the same domain user that the Run As setting for the step is set. The SQL Server Agent services runs as a different Domain user.
Has anyone else had similar problems - Are there any extra permissions I need to set?
cheers..
I have a small SSIS package which:
- drops existing table in Excel,
- creates a new one in Excel,
- copies data from SQL to newly created sheet.
So there are 2 connections: one to a excel file, and second to SQL using sa account. I am working on my account belonging to Administrators group.
SQL Server and Excel file are on my development machine. Everything works ok when I run package from file system using DTExecUI.exe (in context of my user belonging to Administrator group). But when I have created job to execute this package problem with security occured. Even assigning local account on which SQL Server and SQL Server Agent works to Administrator group do not help. I have simulated what can happen when running DTExecUI.exe utility in contex of different user. I have used Administrator (I start it using "Run As..." from context menu in Explorer"). And what occured, SSIS package can not login to SQL Server using sa user!
1. Why running DTExecUI.exe in context of different user impact login to SQL on sa accout? If it were Windows Integrated I could understand it.
2. Especially if the different user is also Administrator!!!
I have found solution for running a task in SQL Agent - SQL Agent has to work on the same account on which SSIS package was created. But this is crazy when I would like to deploy it to a production server.
Please help.
Przemo
Hey guys,
I've got a problem here. I need to send the query result to a csv file then transfer the file to a website. I thought this is a good candidate for a SSIS package. The package is ready now but I don't know how can I execute it from within a stored procedure.
I thought sp_OA family of extended procedure would be helpfull. After following steps:
EXEC @hr1 = sp_OACreate 'DTS.Package', @oPKG OUT
EXEC @hr1 = sp_OAMethod @oPKG, 'LoadFromSQLServer("foo", ,, 256, , , , "foo1")', NULL
EXEC @hr1 = sp_OAMethod @oPKG, 'exec'
EXEC @hr1 = sp_OADestroy @oPKG
it tells me command execute successfully. But no package actually gets executed and I can see no results
Thanks
How can I execute an SSIS package from TSQL without using xp_cmdshell?
I have a web-app which calls some SQL which executes my SSIS package (a DTSX file, but stored in the server). But the security policy for my application won't permit me use to xp_cmdshell.
I want to do this:-
DECLARE @returncode int
EXEC @returncode = xp_cmdshell 'dtexec /sq pkgOne"'
Is there another way for executing a Package without going to the command line (e.g. is there some other system stored proc)?
Thanks
Hi, here is my problem :
I want to run ssis package in sql server 2005 agent.
i've made a new JOB with 3 steps ( 3 ssis package)
But when i run the job, i see only 2 "actions step" in the windows :
Start job .....
Execute job ....
I would like to see at least the execution status of every ssis package and if it's possible,
the execution of every task ( to see quickly if there's some error and what's wrong)
What's the best solution to doing that
Thank for helping
BG.
Hi,
I have created SSIS Package using DTS vizard in SQL 2005 Express. Help me out to execute the Package.
Thanks
I'm trying to execute an SSIS package from an ASP.NET web page. Using some code from http://msdn2.microsoft.com/en-us/library/ms403355.aspx I have managed to get this working when executing a package that contains a stored procedure, however it does not work when there is an Analysis Services cube to build.
Here is my code for the webservice
Code Snippet
Public Class SCCBuildDW
Inherits System.Web.Services.WebService
' LaunchPackage Method Parameters:
' 1. sourceType: file, sql, dts
' 2. sourceLocation: file system folder, (none), logical folder
' 3. packageName: for file system, ".dtsx" extension is appended
_
Public Function LaunchPackage( _
ByVal sourceType As String, _
ByVal sourceLocation As String, _
ByVal packageName As String) As Integer 'DTSExecResult
Dim packagePath As String
Dim myPackage As Package
Dim integrationServices As New Application
' Combine path and file name.
packagePath = Path.Combine(sourceLocation, packageName)
Select Case sourceType
Case "file"
' Package is stored as a file.
' Add extension if not present.
If String.IsNullOrEmpty(Path.GetExtension(packagePath)) Then
packagePath = String.Concat(packagePath, ".dtsx")
End If
If File.Exists(packagePath) Then
myPackage = integrationServices.LoadPackage(packagePath, Nothing)
Else
Throw New ApplicationException( _
"Invalid file location: " & packagePath)
End If
Case "sql"
' Package is stored in MSDB.
' Combine logical path and package name.
If integrationServices.ExistsOnSqlServer(packagePath, ".", String.Empty, String.Empty) Then
myPackage = integrationServices.LoadFromSqlServer( _
packageName, "(local)", String.Empty, String.Empty, Nothing)
Else
Throw New ApplicationException( _
"Invalid package name or location: " & packagePath)
End If
Case "dts"
' Package is managed by SSIS Package Store.
' Default logical paths are File System and MSDB.
If integrationServices.ExistsOnDtsServer(packagePath, ".") Then
myPackage = integrationServices.LoadFromDtsServer(packagePath, "localhost", Nothing)
Else
Throw New ApplicationException( _
"Invalid package name or location: " & packagePath)
End If
Case Else
Throw New ApplicationException( _
"Invalid sourceType argument: valid values are 'file', 'sql', and 'dts'.")
End Select
Return myPackage.Execute()
End Function
End Class
This is the code from my page
Code Snippet
Protected Sub btnBuildDW_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnBuildDW.Click
ExecutePackage()
End Sub
Protected Sub ExecutePackage()
Dim launchPackageService As New SCCBuildDW.SCCBuildDW
Dim packageResult As Integer
Try
packageResult = launchPackageService.LaunchPackage("file", "c:ssis", "PackageTest")
Catch ex As Exception
' The type of exception returned by a Web service is:
' System.Web.Services.Protocols.SoapException
lblResult.Text = "The following exception occurred: " & ex.Message
End Try
lblResult.Text = CType(packageResult, PackageExecutionResult).ToString
' Console.ReadKey()
End Sub
Private Enum PackageExecutionResult
PackageSucceeded
PackageFailed
PackageCompleted
PackageWasCancelled
End Enum
I'm using windows authentication and impersonating an identity. The identity has access to the analysis services role but the package still fails to run.
Can anyone offer any help or advice on this?
Thanks
Is there a way to execute ETL packages programatically? Specifically, is it possible to
manually invoke the ETL package to execute from, say, an ASP.NET
application?
If so, how do you do that?
I've been searching MSDN regarding this but all I see are examples on programatically building packages.