Hi ALl
I need a quick solution for my sql server problem as follows.
Actually Earlier we have SQL Server 7, Every 3 hours we execute one
Procedure it takes only 15 seconds. Now we
Install SQL Server 2000 and Same Procedure Is taking 30 Minutes for
execution what could be the reason
I want to minimize the execution time. how can i ?
Please help me
Thanks in advance
Shan
Hi,
I have a web application using Stored Procedure (SP). I see that there's a SP taking long time to execute. I try to capture it by Profiler Tool, and find out that with the same SP on the same db with the same parameter. The duration of executing by my web app is far bigger than the duration of executing on SQl server management studio - query window
Please see the image through this url http://kyxao.net/127/ExecutionProblem.png
Any ideas for this issue?
Thanks a lot
Hi,I have a web application using Stored Procedure (SP). I see that there's a SP taking long time to execute. I try to capture it by Profiler Tool, and find out that with the same SP on the same db with the same parameter. The duration of executing by my web app is far bigger than the duration of executing on SQl server management studio - query windowPlease see the image attached http://kyxao.net/127/ExecutionProblem.png Any ideas for this issue?Thanks a lot Jalijack
View 2 Replies View RelatedI have a problem with a SQL Server (2000) Agent Job that has 3 steps that don't produce the desired outcome when invoked in total but will produce the desired outcome if the first step is broken up from the last two steps.
1) The first step uses third party software to generate PDFs to a folder.
2) The second step executes the following command to ftp the PDFs to a folder and move these PDFs to a backup folder:
EXEC master..xp_cmdshell 'm: & cd C:Program Filesfoldername1 AutoGeneral_Ftp & dir & FTP -n -s:C:Progra~1foldername1AutoGeneral_FTPupload_G eneral.ibc www.someorgname.org & move /Y
\networkdriveArchiveGeneral*.pdf \networkdriveArchiveackupsGeneral'
3) The third step determines if any files remain in the folder that contained the PDFs. If files are still in the folder then the FTP and move step (step 2) did not work and a stored procedure is invoked to send an email to the appropriate administrator
DECLARE @result int
EXEC @result = master..xp_cmdshell 'Dir "\networkdriveArchiveGeneral*.pdf" | find /i "file"'
IF @result = 0
exec ibc_sp_Email_Report_Failure 'FTP General Report'
When I invoke this job from Enterprise Manager and view the job history, it says that all steps executed successfully (which I understand may be the case even if the files were not FTPed or moved since the command can still return a code indicating success even though it didn't do what I expected.) In fact, the PDF is generated and written to \networkdriveArchiveGeneral
eportname.pdf. Steps 2 and 3 do not do what I expect. The PDFs still remain in the folder.
But when I start the job from step 2, the files are then moved. So, invoking the entire job does not move the files; invoking the job from step 2 moves the files.
Simple, you think, it is obvious that you didn't set up your job steps correctly in that step 1 does not go to the next step upon success. But I already checked that. Step 1 goes to the next step upon success.
Anybody ever come upon this problem? Any suggestions as to what else I can look at?
Thanks in advance,
Stedan
how to use opendatasource to execute a stored procedure remotely in MySQL with parameters..I am using sp_configure to enable and disable Ad Hoc Distributed queries as below before and after the open data source statement
sp_configure show,1
reconfigure with override
go
sp_configure 'Ad Hoc Distributed Queries',1
reconfigure with override
go
[code]...
Hello,
I deaply need to know how to execute procedures from package in oracle, from sqlserver 2000 using linkserver.
Thank you very much,
Victor
DBA
What is the syntax for creating a update trigger and passing the values which were updated to a stored procedure on a linked server?? Specifically need syntax for updated value, as well as the syntax for executing the stored proc on the linked server.
Thank you
Is this possible, I am trying to execute a stored procedure depending on what parameter is selected, something like this????
Case
when field = 'value' then execute sp_procedure else execute sp_procedure_2 end
case
I have a stored procedure which executes about forty other stored procedures in several different databases. All of these other procedures truncate tables and insert new data into those tables selected from still other tables.
I want to run this top-level procedure using an account which can't do anything else.
Is there a simple way to give it all the permissions it needs without empowering it to do anything else?
I've managed to get my Instance connected to the internet and I can query it using PHP and SQL, I can also look at views with no problem.
I have it working as an "ADODB.Connection" and like I said it connects and I can query data and display results.
Now I have coded a Stored Proc "GetMonthDays" in Sql Server:
Which returns days 1 through xxx in a given month and also returns the Day name eg... Sat for each date
2014-01-01 Thurs
2014-01-02 Fri
etc...
It works perfectly and very fast so All cool with that side BUT... I want to be able to query the Database through a Stored Proc, I've spent all day trying to find a way to get this to work and I've hit a wall
This T-SQL returns what it needs to
Begin
EXEC dbo.qselGetMonthDays '2015-01-01'
End
I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
Is there a way using a stored procedure in a local database to add a record to a database executing in a cloud environment when both entities reside in different domains?
View 2 Replies View RelatedI have to build a simple Windows Forms application that imports data for review and then exports it into a different format. I've created DTS packages in SQL 2000 for the import and the export.
What is the recommended way to execute the packages using buttons on a Windows form?
Hi,
I have StoredProcedure with 2 Parameters. I want to execute this procedure in SQLSERVER Query Builder.
I know without using parameters to execute. i.e EXEC pro_demo
But now i have with parameters.
How to pass that parameters in a Query Builder?
I have the following code. User clicks on a button, then textbox with
calendar icon is displayed, calendar appears when icon is clicked, user
selects date, date is populated in the textbox field. The value in the
textbox field is passed to a stored procedure. How can I check if the
sp call was successful and what can I do to add a message to the user.
Also, is the control flow appropriate or should I change it? Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click TextBox1.Visible = True ImageButton1.Visible = True If Calendar1.Visible = True Then ElseIf TextBox1.Text <> "" Then ' Create connection Dim conn As Data.SqlClient.SqlConnection = New Data.SqlClient.SqlConnection(SQLSTRING.ConnectionString) conn.Open() ' Create command Dim cmd As Data.SqlClient.SqlCommand = New Data.SqlClient.SqlCommand() cmd.Connection = conn cmd.CommandType = Data.CommandType.StoredProcedure cmd.CommandText = "sp" cmd.Parameters.Add("@date", Data.SqlDbType.DateTime) cmd.Parameters("@date").Value = Convert.ToDateTime(TextBox1.Text) cmd.ExecuteNonQuery() conn.Close() Else Response.Write("You must select a date.") End If
Hi,
I have create a DTS package "test"
i see the name is stored in msdb.sysdtspackages
how do i run this "test" package from stored procedure
thx
vik
Hello,
I'm using Sql Server 2005, and I am receiving an error when I attempt to run a stored procedure and I have no clue why. Can someone please help?
I receive an error when I attempt to execute the following stored procedure:
exec INSERT_OBJ
1234,
'Name',
123,
NULL,
GetDate(),
'system'
The error I receive is: "Incorrect syntax near ')'" All of the values are valid values and valid types.
Is it possible to be an error within the stored procedure itself? This error makes it sound like the syntax of my attempt is incorrect, thus it never gets ran.
Thank you ,
Crystal
Hi,
I Have the next problem:
I have a store procedure in my db which is called from an aplication (developed in Java). That sp contains a cursor which updates regs from a table. After calling from the java application I notice that some regs of the cursor have not entered in it, i mean if the sp executes 200 iterations in the cursor only 150 have worked. But all the iterations enter when i call the sp from the query analyzer!!! and it takes more time too.
Does anybody know something about it?????
Hi All,
I am trying to execute a "ServerB" Stored Procedure in "ServerA".This SP is in Multiple DB's in ServerB.
I am trying to use Openquery and Dynamic SQL to do that.But I am having issues.
Intially i am trying to pass just one DBname as parameter..if it returns values then i can use cursor or other options to retrieve for multiple DB's
Please Help!!!
Ex:
DECLARE @TSQL varchar(8000), @DBNAME char(20)
SELECT @DBNAME = 'DB1'
SELECT @TSQL = 'SELECT * FROM OPENQUERY(serverB'+','+''exec '' + @DBNAME + ''.dbo.sp_StoredProcedure''+')'
EXEC (@TSQL)
Thanks in Advance!!!
when i try to run a procedure i've been working on, i get the following Error:
Server: Msg 8144, Level 16, State 2, Line 0
Procedure or function has too many arguments specified.
execution code:
exec search_orders_1 @dwelltype=1
stored procedure:
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO
ALTER PROCEDURE search_orders_1
@lowageint=null,
@highageint=null,
@highwealthint=null,
@lowwealthint=null,
@highpurpriceint=null,
@lowpurpriceint=null,
@lowmtgamtint=null,
@highmtgamtint=null,
@lowincomenvarchar(4000)=null,
@highincomenvarchar(4000)=null,
@marriedstatnvarchar(4000)=null,
@lowyearbuildnvarchar(4000)=null,
@highyearbuildnvarchar(4000)=null,
@mtgpresstatnvarchar(4000)=null,
@lenderpresstatnvarchar(4000)=null,
@ratetsnvarchar(4000)=null,
@loantsnvarchar(4000)=null,
@childstatnvarchar(4000)=null,
@homeownerstatnvarchar(4000)=null,
@lowpurdatenvarchar(4000)=null,
@highpurdatenvarchar(4000)=null,
@addresstype varchar(3)=null,
@SPSirvarchar(3)=null,
@debttypevarchar(3)=null,
@dwelltypevarchar(3)=null,
@zipselectnvarchar(4000)=null,
@acselectnvarchar(4000)=null,
@stselectnvarchar(4000)=null,
@cityselectnvarchar(4000)=null,
@counselectnvarchar(4000)=null,-- as
@debug bit = 0 AS
DECLARE @sql nvarchar(4000),
@paramlist nvarchar(4000)
SELECT @sql ='SELECT o.state_abbrv, count(o.state_abbrv) as kount FROM dbo.mortgage o WHERE 1 = 1'
IF @lowage<>0 and @lowage is not null
SELECT @sql = @sql + ' AND o.per1_age >= @xlowage'
IF @highage<>0 and @highage IS NOT null
SELECT @sql = @sql + ' AND o.per1_age <= @xhighage'
IF @lowincome<>'DF' and @lowincome IS NOT NULL
SELECT @sql = @sql + ' AND o.est_inc >= @xlowincome'
IF @highincome<>'DF' and @highincome IS NOT NULL
SELECT @sql = @sql + ' AND o.est_inc <= @xhighincome'
IF @highwealth<>0 and @highwealth IS NOT NULL
SELECT @sql = @sql + ' AND o.wealth_rating <= @xhighwealth'
IF @lowwealth<>0 and @lowwealth IS NOT NULL
SELECT @sql = @sql + ' AND o.wealth_rating >= @xlowwealth'
IF @highpurprice<>0 and @highpurprice IS NOT NULL
SELECT @sql = @sql + ' AND o.hm_purprice <= @xhighpurprice'
IF @lowpurprice<>0 and @lowpurprice IS NOT NULL
SELECT @sql = @sql + ' AND o.hm_purprice >= @xlowpurprice'
IF @lowyearbuild<>'DF' and @lowyearbuild IS NOT NULL
SELECT @sql = @sql + ' AND o.hm_year_build >= @xlowyearbuild'
IF @highyearbuild<>'DF' and @highyearbuild IS NOT NULL
SELECT @sql = @sql + ' AND o.hm_year_build <= @xhighyearbuild'
IF @lowmtgamt<>0 and @lowmtgamt IS NOT NULL
SELECT @sql = @sql + ' AND o.oo_mtg_amnt >= @xlowmtgamt'
IF @highmtgamt<>0 and @highmtgamt IS NOT NULL
SELECT @sql = @sql + ' AND o.oo_mtg_amnt <= @xhighmtgamt'
IF @lowpurdate<>'DF' and @lowpurdate IS NOT NULL
SELECT @sql = @sql + ' AND o.hm_purdate >= @xlowpurdate'
IF @highpurdate<>'DF' and @highpurdate IS NOT NULL
SELECT @sql = @sql + ' AND o.hm_purdate <= @xhighpurdate'
IF @marriedstat in ('M','S')
SELECT @sql = @sql + ' AND o.per1_ms = @xmarriedstat'
IF @ratets in ('V','F')
SELECT @sql = @sql + ' AND o.oo_mtg_rate_t = @xratets'
IF @homeownerstat in ('H','R')
SELECT @sql = @sql + ' AND o.homeowner = @xhomeownerstat'
IF @childstat in ('Y','N')
SELECT @sql = @sql + ' AND o.child_pres = @xchildstat'
IF @lenderpresstat ='Y'
SELECT @sql = @sql + ' AND o.oo_mtg_lender_name<>+ '' '''
IF @lenderpresstat ='N'
SELECT @sql = @sql + ' AND o.oo_mtg_lender_name=+ '' '''
IF @mtgpresstat='Y'
SELECT @sql = @sql + ' AND o.oo_mtg_amnt>0'
IF @mtgpresstat='N'
SELECT @sql = @sql + ' AND o.oo_mtg_amnt=0'
IF @loants<>'DF' and @loants IS NOT NULL
SELECT @sql = @sql + ' and o.oo_mtg_loan_t in ( ''' + REPLACE( @loants, N',', N''',''' ) + N''' )'
if @dwelltype='1'
SELECT @sql = @sql + ' and o.addr_unit_desnum='' '''
if @dwelltype='2'
SELECT @sql = @sql + ' and o.addr_unit_desnum<>'' '''
if @acselect <> 'DF' or @stselect <> 'DF' or @cityselect <> 'DF' or @counselect <> 'DF' or @zipselect <> 'DF'
SELECT @sql = @sql + ' and (1=2'
IF @acselect<>'DF' and @acselect IS NOT NULL
SELECT @sql = @sql + ' OR o.areacode in ( ''' + REPLACE( @acselect, N',', N''',''' ) + N''' )'
IF @stselect<>'DF' and @stselect IS NOT NULL
SELECT @sql = @sql + ' OR o.state_abbrv in ( ''' + REPLACE( @stselect, N',', N''',''' ) + N''' )'
IF @cityselect<>'DF' and @cityselect IS NOT NULL
SELECT @sql = @sql + ' OR o.citystate in ( ''' + REPLACE( @cityselect, N',', N''',''' ) + N''' )'
IF @counselect<>'DF' and @counselect IS NOT NULL
SELECT @sql = @sql + ' OR o.countystate in ( ''' + REPLACE( @counselect, N',', N''',''' ) + N''' )'
IF @zipselect<>'DF' and @zipselect IS NOT NULL
SELECT @sql = @sql + ' OR o.zip in ( ''' + REPLACE( @zipselect, N',', N''',''' ) + N''' )'
if @acselect <> 'DF' or @stselect <> 'DF' or @cityselect <> 'DF' or @counselect <> 'DF' or @zipselect <> 'DF'
SELECT @sql = @sql + ')'
SELECT @sql = @sql + ' group by o.state_abbrv ORDER BY o.state_abbrv '
IF @debug = 1
PRINT @sql
SELECT @paramlist = '@xlowageint,
@xhighageint,
@xlowincomenvarchar(4000),
@xhighincomenvarchar(4000),
@xmarriedstatnvarchar(4000),
@xhighwealthint,
@xlowwealthint,
@xhighpurpriceint,
@xlowpurpriceint,
@xlowyearbuildnvarchar(4000),
@xhighyearbuildnvarchar(4000),
@xlowmtgamtint,
@xhighmtgamtint,
@xmtgpresstatnvarchar(4000),
@xlenderpresstatnvarchar(4000),
@xratetsnvarchar(4000),
@xloantsnvarchar(4000),
@xchildstatnvarchar(4000),
@xhomeownerstatnvarchar(4000),
@xlowpurdatenvarchar(4000),
@xhighpurdatenvarchar(4000),
@xzipselectnvarchar(4000),
@xacselectnvarchar(4000),
@xstselectnvarchar(4000),
@xcityselectnvarchar(4000),
@xcounselectnvarchar(4000)'
EXEC sp_executesql @sql, @paramlist,
@lowage,
@highage,
@lowincome,
@highincome,
@marriedstat,
@highwealth,
@lowwealth,
@highpurprice,
@lowpurprice,
@lowyearbuild,
@highyearbuild,
@lowmtgamt,
@highmtgamt,
@mtgpresstat,
@lenderpresstat,
@ratets,
@loants,
@childstat,
@homeownerstat,
@lowpurdate,
@highpurdate,
@addresstype,
@SPSir,
@DebtType,
@DwellType,
@zipselect,
@acselect,
@stselect,
@cityselect,
@counselect
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
could someone help me figure out what's up? someone told me you can have 1,024 parameters for a stored procedure.... what am i missing?
do i have to many IF clauses?
Hi,
Can anyone tell me how to execute a stored procedure using vb6.0.I am able to connect to sqlserver from my application.Simple select queries are working.
The stored procedure contains a select statement at the end.I want to get that as the resultset in vb6.0.How do I do this.
Keerthi
In a few places in my application I want to execute a procedure for every selected record. The only way that I know how to do this is to use a cursor, as below. This code works perfectly, but everything I read says that one should use set operations rather than cursors wherever possible, as they are much more efficient. So what I really want to do is something like Exec procedure argument [,argument]... where argument in (Selet value from ....)or perhaps Exec procedure (select ...) [,argument]or SELECT (procedure....
all of which are invalid. Is there any syntax that avoids the cursor in: ---Copy all facts (and their details, if any) to the new INDI
Declare ccopyIndi cursor for --Step through facts
Select Factid from gdbfact
where factindiid = @IndiidFrom
Open ccopyIndi
FETCH Next from ccopyIndi into @Factid
while @@Fetch_status = 0
Begin
exec dbo.gdbcopyfact @NewIndiid, @Factid
Fetch next from ccopyIndi into @Factid
End
CLOSE ccopyIndi
DEALLOCATE ccopyIndi
(BTW, dbo.gdbcopyfact is NOT a simple INSERT statement)
Hi
I have a stored procedure in SQL Server 2005. It make a backup of a database and restores it to a different name.I use ASP.NET and Framework 1.1.It works really fine when I use SQL Server 2000.
But!When trying to do the same thing on SQL Server 2005, the database seems to be created "half way" I can see that the database is created, but after the name is the text Restoring....It never finish restoring.... and nothing shows in the server logs.
Any ideas?Differences between SQL Server 2000 and SQL Server 2005 that I must be aware of?Priviliges?ConnectionString parameters?Drivers?
I'm using .NET Framework 1.1ODBC (SQL Native Client)
Here is the Store procedure code:set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[CreateProjectDataBase]
@AFModelDatabaseProject varchar(200),
@TemplateDbBackupFileAndName varchar(200),
@DatabaseName varchar(200),
@DataFilePathAndName varchar(200),
@LogFilePathAndName varchar(200)
AS
BACKUP DATABASE @AFModelDatabaseProject TO DISK = @TemplateDbBackupFileAndName
WITH INIT
RESTORE DATABASE @DatabaseName FROM DISK = @TemplateDbBackupFileAndName
WITH MOVE 'AdressTNG_Project_Data' TO @DataFilePathAndName,
MOVE 'AdressTNG_Project_Log' TO @LogFilePathAndName
and here is how it is called from within .NET:this.odbcCreateDataBaseCommand.CommandType = System.Data.CommandType.StoredProcedure;
this.odbcCreateDataBaseCommand.Parameters["@AFModelDatabaseProject"].Value = afModelDataBaseName;this.odbcCreateDataBaseCommand.Parameters["@TemplateDbBackupFileAndName"].Value = TemplateDbBackupFileAndName;
this.odbcCreateDataBaseCommand.Parameters["@DatabaseName"].Value = dbName;this.odbcCreateDataBaseCommand.Parameters["@DataFilePathAndName"].Value = DataFilePathAndName;
this.odbcCreateDataBaseCommand.Parameters["@LogFilePathAndName"].Value = LogFilePathAndName;this.odbcCreateDataBaseCommand.CommandText = "{ CALL CreateProjectDataBase(?,?,?,?,?) }";
this.odbcCreateDataBaseCommand.ExecuteNonQuery();
RegardsTomas
We have a test and production environment. After transfering some tables from
test to prod and all stored procedures using those tables.
We get an error when executing those stored procedures:
" DB-library: Possible network error:
Bad token from SQL Server:
Datastream processing out of sync.
Net-library error 0:
DB-libray Process Dead - Connection Broken. "
When we execute the stored procedure with 1 parameter less we get a parameter
missing error. Then we execute the stored procedure again and everything is allright?
Has anyone experienced this before? If so, please help.
SQlServer 6.50.201
Kees Visser
How can I execute a package from a store procedure. The package function will export a table to a text file in c:export.
I can run the package manually by clicking on it to execute it. I am looking for another way to run the package from a store procedure. any ideas
Thanks
Ali
Hi Guys..
How Can i Execute a result from a StoredProcedure... I got a sp that generates drop index and pk from all tables in the DB..
I got this results from running (sp_dropallindex) like this:
ALTER TABLE Table1 DROP CONSTRAINT PK_Table1 GO
ALTER TABLE Table2 DROP CONSTRAINT PK_table2 GO
DROP INDEX table1.index1 GO
DROP INDEX table1.index2 GO
I need to execute that result.. I know that i can copy/paste into Query Analyzer and then run it but how can i handle that result and run all in shot ...
I tried something like this:
DECLARE @DROP AS VARCHAR(8000)
SET @DROP='exec sp_drop_allindex'
EXECUTE (@DROP)
and i see the same out , but my indexes and PK still there ... i'm confused about it ..
PLEASE HELP ME OUT :D
i wanna execute a stored procedure in a select and use its return type
i.e
select name from table1 where id = sp 1,1
i executed it and occurred an error
help me pls
Hi,
I have a web application using Stored Procedure (SP). I see that there's a SP taking long time to execute. I try to capture it by Profiler Tool, and find out that with the same SP on the same db with the same parameter. The duration of executing by my web app is far bigger than the duration of executing on SQl server management studio - query window
Please see the image attached
Any ideas for this issue?
Thanks a lot
Hi everyone,first time here, so I'm sorry if this has been covered already agesago. :(I am trying to learn T-SQL and Stored Procedures and bought the bookon these topics by Djan Sunderic, Publisher McGraw Hill/Osborne. I'malready stuck on my first Stored Procedure and getting error messagesthat I cannot understand. I've already tried Google and Microsoftonline to no avail. I do have the .NET Framework on my system and useit for programming in C# sometimes and by the looks of the error, it'ssomething to do with that? Please note I am only using SQL ServerExpress.Here is the first Stored Procedure:SET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGOCREATE PROCEDURE ap_HelloASBEGINSET NOCOUNT ON;SELECT 'Hello world'SELECT * from dbo.EqTypeENDGOThe error in its entirety is this:Msg 6522, Level 16, State 1, Procedure ctrd_DDL_PROCEDURE_EVENTS_vb,Line 1A .NET Framework error occurred during execution of user definedroutine or aggregate 'ctrd_DDL_PROCEDURE_EVENTS_vb':System.UnauthorizedAccessException: Access to the path 'c:server_login.log' is denied.System.UnauthorizedAccessException:at System.IO.__Error.WinIOError(Int32 errorCode, StringmaybeFullPath)at System.IO.FileStream.Init(String path, FileMode mode, FileAccessaccess, Int32 rights, Boolean useRights, FileShare share, Int32bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, StringmsgPath, Boolean bFromProxy)at System.IO.FileStream..ctor(String path, FileMode mode,FileAccess access, FileShare share, Int32 bufferSize, FileOptionsoptions)at System.IO.StreamWriter.CreateFile(String path, Boolean append)at System.IO.StreamWriter..ctor(String path, Boolean append,Encoding encoding, Int32 bufferSize)at System.IO.StreamWriter..ctor(String path, Boolean append)at VbTriggers.Triggers.trigger_DDL_PROCEDURE_EVENTS() ..The statement has been terminated.Can anyone assist please? :(Many thanks in advance,Lara
View 3 Replies View RelatedHI,I need to run same kind of transactions (basically deleting records)in a loop but I have only 1 hour in a day to run my procedure. So Ineed to set a timer in a SP so that SP terminates after one hour andthen rest of the transactions will be done next day.Can anybody suggest as how to check execution time in a storedprocedure? The execution of the SP will be scheduled every night.If u need any further info pls ask.Thanks,Subodh
View 2 Replies View RelatedHi All,
I have a Execute SQL Task I get some values from a table onto three variables. Next step in a DFT, I try to execute a stored proc by passing these variables as parameters.
EXEC [dbo].[ETLloadGROUPS]
@countRun =?,
@startTime =?,
@endTime = ?
This is the syntax i use, in the parameters tab of the DFT I ensured that all the parameters are correctly mapped.
When I run the package, it executes successfully but no rows are fectched. I tried running the stored proc manually in the database, and it seems to work fine.
Am I missing something here ? Please Advice
Thanks in Advance
I have a maintenance stored procedure that executes a script using xp_cmdshell and sqlcmd. The stored procedure has one argument that is contains the name of the procedure to update.
The stored procedures retrieves the location of the stored procedures (stored in a table) and then builds a variable that contains the sqlcmd command. Note that the file name of the script is <stored procedure name>.sql
Basically stored procedure is ...
select @cmd = 'sqlcmd -E -d ' + @dbname + ' -i "' + @filelocation + @proc + '.sql" '
exec master..xp_cmdshell @cmd
Is there a way to execute sql scripts within a stored procedure without using xp_cmdshell?
Thanks!!
Is there a way to call SQLCMD from within an executing procedure?