Execution '' Not Found
Sep 7, 2007
I have this annoying error and I cannot find a solution yet. Please help!
I'm generating some reports from a SQL Server 2005 database. I know these reports work fine because I've seen them working, but, sometimes, appearently random, it doesn't create the report, instead, it gives me this error:
Execution '' not found
With nothing inside the ''. Another case is when I try to refresh the report: I generate the report, I see it, and I press F5 to refresh, I get the same error again.
Could anybody help me please? I'm desperate.
View 13 Replies
ADVERTISEMENT
Jun 21, 2007
I am running a .Net web application that accesses many SQL reports using the Report Viewer.
If a report takes quite a while to load or if I leave the web application idle for quite some time, I get an error similar to the following:
Execution ' ' cannot be found
It seems like the connection to SQL times out and it tries to execute an empty SQL query. Is there any way to prevent this from happening?
View 5 Replies
View Related
Oct 25, 2006
have developed a couple of simple parameterised reports in SQL Server 2005 Enterprise Reporting Services for my current project. I am now trying to use Visual Studio 2005 and the ReportView control to hook into these remote reports from an application. I have run into an error and am unable to resolve it:
Execution 'wccc0s552po43i45n10vgmrq' cannot be found
I have trawled the Internet and a chapter in "Microsoft SQL Server 2005 Reporting Services" with no joy. Has anyone seen this before. I'm sure it will be something simple that I have overlooked.?
View 13 Replies
View Related
Oct 23, 2007
I am getting the following error some times when I am running my report.
Execution 'g00qpkmgjffz0xb1ydmvmx55' cannot be found
Please give me an idea to resolve this issue.
Thanks
View 1 Replies
View Related
Jan 24, 2008
We are intermittently seeing this error when viewing a report through the report viewer control.
Our setup is three load-balanced web servers all pointing to a single server that runs Reporting Services (front-end and DB). Do any special steps need to be taken to make RS compatible with a web farm? RS itself is not scaled out, just the calling web servers. Those web servers are set up to share session in a separate SQL Server.
Previous threads on this error seem to involve session timeout, but that doesn't appear to be the case here since we sometimes see the error on the very first request of the report. Refreshing the page will sometimes show the report and sometimes not.
Any suggestions?
View 2 Replies
View Related
Jan 23, 2008
Folks i have been dumped into the frying pan. Put in hours and hours of work and research over it already but still can't seem to figure out what the heck is going on. Can an expert listen to my troubles and perhaps share some hints. Thank you so much for reading.
Enviroments
Windows 2003 SP2 x64
SQL 2005 SP2, Reporting service
IIS6 no SSL/Cert with .NET SP1
Both ReportServer and ReportManager was working prior to an unfortunenate event, installing Exchange 2008.
Immediately after the installation of Exchange 2008 we experienced 2 problems
1. SSL certs was now required, which we resolved by unchecking the SSL required option in IIS6
2. After SSL, execution not found occured in ReportManager
Immediately after we discovered the Execution error, we went over logs after logs to see whats going on. Nothing worked
We have, uninstalled Exchange, Uninstalled Reporting service, Reinstalled reporting service, updated report viewer to sp1, increased the timeout limit to 5 minutes, checked and rechecked our login/password on sql asp w3k reporting and till now still no go.
<-- Error messeage -->
This error msg in reporting service i believe is the reason why we are getting Execution not found.
w3wp!session!1!01/23/2008-11:14:02:: i INFO: LoadSnapshot: Item with session: g4bqhtq0pvzpxh55leja4445, reportPath: /Report Bank/Deposit by Account, userName: NT AUTHORITYNETWORK SERVICE not found in the database
and
w3wp!library!1!01/23/2008-11:14:02:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'g4bqhtq0pvzpxh55leja4445' cannot be found, ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'g4bqhtq0pvzpxh55leja4445' cannot be found
<-- Error messeage -->
After reading tons of info, In our case our reports are simple reports, i can generate the report without problem from ReportServer in less than 10 seconds, just without the bells and whisles. But the second i hop on Report manager it will fight me till death with Execution. I think in our case, Its throwning a Username not found in database which might be preventing the creation of session key or the error is causing the render not to happen. If render dosen't happen then no key can be assigned to it?
We have tried to use impersonate via the web.config and also changing Windows account logins etc but none of them work. One thing that is consistent is that the userName: NT AUTHORITYNETWORK SERVICE not found has NEVER changed even if we impersonate or manually hardcode the username.
Can anyone please help us out here!! Thank you.
View 8 Replies
View Related
Nov 2, 2007
Configuration:
Reporting Services 2005 running on IIS/6.0 on Server A.
ReportServer and ReportServerTempDB is running on SQL2005 on Server B.
I have a simple SSRS report that runs on Server A and will connect to SQL 2005 on Server B to retrieve data for the report. My report has only one parameter and I use the value of this parameter as a connection string to the database.
Here is an example of the parameter:
data source=Server B; initial catalog=TestDB; uid=sa; password=abc123
From the report manager, this report is configured to use custom data source.This report is also configured to use Credentials supplied by the user running the report.
Problem:
When I run the report through the Report Manager, as expected, I was prompted to enter a login name and password for report data source. I entered values in both fields and click on the View Report button. Now I am prompted to enter the connection string for the report parameter. I entered a value for parameter and click on the View Report button and I got the following error message:
Execution 'k5jkbu550bjzfy55j1uw1055' cannot be found (rsExecutionNotFound)
When I go back to the Data Sources property screen in report manager and change the credential from
Credentials supplied by the user running the report TO Credentials stored securely in the report server and hardcode the username and password there, the report will run fine.
Can you tell me what the error message means? Any suggestion to get this resolved would be greatly appreciated.
View 2 Replies
View Related
Feb 6, 2008
Hello.
Every time we try to view reports using Report Manager this error (
Execution 'kj1mek55bmhvft55cihmeb55' cannot be found) is occured. However, we can view reports using ReportViewer control from VS2005 and subscriptions works properly (without this error).
We are using integrated security to login to Report Manager.
Configuration: SQL Server 2005, SSRS 2005 SP1, Windows 2003, IIS 6.0
How can we fix it?
Please let me know if you need any additional information.
Thanks.
View 4 Replies
View Related
Aug 6, 2007
I have setup the Sharepoint 2007 Reporting Services add-in and am running into an issue. I was able to get a report to show up in a report viewer webpart once, but after that, I receive a message similiar to the following (for all reports);
'Execution 'ex2ubmetmr13vdffxciursfg' cannot be found '
Any help would be appreicated. I'm including my log file for the error as well as it should be helpful.
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.3042.00</Product>
<Locale>en-US</Locale>
<TimeZone>Mountain Daylight Time</TimeZone>
<Path>c:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesLogFilesReportServer__08_06_2007_12_33_12.log</Path>
<SystemName>DEV-AD-V2</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 1</OSName>
<OSVersion>5.2.3790.65536</OSVersion>
</Header>
w3wp!webserver!6!8/6/2007-12:33:14:: i INFO: Reporting Web Server started
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing ConnectionType to '1' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!resourceutilities!6!8/6/2007-12:33:15:: i INFO: Reporting Services starting SKU: Enterprise
w3wp!resourceutilities!6!8/6/2007-12:33:15:: i INFO: Evaluation copy: 0 days left
w3wp!runningjobs!6!8/6/2007-12:33:17:: i INFO: Database Cleanup (Web Service) timer enabled: Next Event: 600 seconds. Cycle: 600 seconds
w3wp!runningjobs!6!8/6/2007-12:33:17:: i INFO: Running Requests Scavenger timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!runningjobs!6!8/6/2007-12:33:17:: i INFO: Running Requests DB timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!runningjobs!6!8/6/2007-12:33:17:: i INFO: Memory stats update timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!library!6!08/06/2007-12:33:18:: Call to GetItemTypeAction(/).
w3wp!library!6!08/06/2007-12:33:18:: i INFO: Catalog SQL Server Edition = Enterprise
w3wp!library!6!08/06/2007-12:33:20:: Call to ListParentsAction(/).
w3wp!library!6!08/06/2007-12:33:20:: Call to ListChildrenAction(/, False).
w3wp!library!6!08/06/2007-12:33:22:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!security!6!08/06/2007-12:33:22:: i INFO: Exception while running with elevated privileges
w3wp!security!6!08/06/2007-12:33:22:: i INFO: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!library!6!08/06/2007-12:33:28:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!security!6!08/06/2007-12:33:28:: i INFO: Exception while running with elevated privileges
w3wp!security!6!08/06/2007-12:33:28:: i INFO: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!library!6!08/06/2007-12:33:28:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!security!6!08/06/2007-12:33:28:: i INFO: Exception while running with elevated privileges
w3wp!security!6!08/06/2007-12:33:28:: i INFO: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!library!6!08/06/2007-12:33:29:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!security!6!08/06/2007-12:33:29:: i INFO: Exception while running with elevated privileges
w3wp!security!6!08/06/2007-12:33:29:: i INFO: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!webserver!6!08/06/2007-12:33:29:: i INFO: Processed folder '/'
w3wp!library!9!08/06/2007-12:37:33:: Call to ListParentsAction(http://DEV-ad-v2/mySites).
w3wp!library!9!08/06/2007-12:37:33:: Call to ListParentsAction(http://DEV-ad-v2/mySites).
w3wp!library!9!08/06/2007-12:37:33:: Call to ListChildrenAction(http://DEV-ad-v2/mySites, False).
w3wp!webserver!9!08/06/2007-12:37:34:: i INFO: Processed folder 'http://DEV-ad-v2/mySites'
w3wp!library!9!08/06/2007-12:39:28:: Call to GetSystemPropertiesAction().
w3wp!library!9!08/06/2007-12:40:18:: Call to GetPermissionsAction(http://DEV-ad-v2).
w3wp!library!9!08/06/2007-12:40:18:: Call to GetSystemPropertiesAction().
w3wp!library!9!08/06/2007-12:40:18:: Call to GetPermissionsAction(http://DEV-ad-v2/Test Reports/Report1.rdl).
w3wp!library!9!08/06/2007-12:40:26:: i INFO: Call to RenderFirst( 'http://DEV-ad-v2/Test Reports/Report1.rdl' )
w3wp!library!9!08/06/2007-12:40:29:: Using folder c:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesRSTempFiles for temporary files.
w3wp!webserver!9!08/06/2007-12:40:30:: i INFO: Processed report. Report='http://DEV-ad-v2/Test Reports/Report1.rdl', Stream=''
w3wp!library!9!8/6/2007-12:43:17:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams
w3wp!library!9!8/6/2007-12:53:17:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams
w3wp!library!9!08/06/2007-12:59:05:: Call to GetItemTypeAction(http://DEV-ad-v2/Shared Documents/Reports/Report Project3).
w3wp!library!9!08/06/2007-12:59:05:: Call to GetItemTypeAction(http://DEV-ad-v2/Shared Documents/Reports).
w3wp!library!9!08/06/2007-12:59:05:: Call to GetItemTypeAction(http://DEV-ad-v2/Shared Documents).
w3wp!library!6!08/06/2007-12:59:06:: Call to CreateFolderAction(Reports, http://DEV-ad-v2/Shared Documents).
w3wp!library!6!08/06/2007-12:59:08:: Call to CreateFolderAction(Report%20Project3, http://DEV-ad-v2/Shared Documents/Reports).
w3wp!library!6!08/06/2007-12:59:09:: Call to GetItemTypeAction(http://DEV-ad-v2/Shared Documents/Data Sources).
w3wp!library!6!08/06/2007-12:59:09:: Call to GetItemTypeAction(http://DEV-ad-v2/Shared Documents).
w3wp!library!6!08/06/2007-12:59:09:: Call to CreateFolderAction(Data%20Sources, http://DEV-ad-v2/Shared Documents).
w3wp!library!6!08/06/2007-12:59:10:: Call to GetItemTypeAction(http://DEV-ad-v2/Shared Documents/Data Sources/EDR.rsds).
w3wp!library!6!08/06/2007-12:59:10:: Call to CreateDataSourceAction(EDR.rsds, http://DEV-ad-v2/Shared Documents/Data Sources, True).
w3wp!library!6!08/06/2007-12:59:15:: Call to GetItemTypeAction(http://DEV-ad-v2/Shared Documents/Reports/Report Project3/Report1.rdl).
w3wp!library!6!08/06/2007-12:59:15:: Call to CreateReportAction(Report1.rdl, http://DEV-ad-v2/Shared Documents/Reports/Report Project3, True).
w3wp!library!6!08/06/2007-12:59:18:: Call to SetItemDataSourcesAction(http://DEV-ad-v2/Shared Documents/Reports/Report Project3/Report1.rdl).
w3wp!library!6!08/06/2007-13:02:46:: Call to GetPermissionsAction(http://DEV-ad-v2/Shared Documents/Reports/Report Project3/Report1.rdl).
w3wp!library!6!08/06/2007-13:02:46:: Call to ListParentsAction(http://DEV-ad-v2/Shared Documents/Reports/Report Project3/Report1.rdl).
w3wp!library!6!08/06/2007-13:02:49:: Call to GetPermissionsAction(http://DEV-ad-v2).
w3wp!library!6!08/06/2007-13:02:50:: Call to GetSystemPropertiesAction().
w3wp!library!6!08/06/2007-13:02:50:: Call to GetPermissionsAction(http://DEV-ad-v2/Shared Documents/Reports/Report Project3/Report1.rdl).
w3wp!session!6!08/06/2007-13:02:56:: i INFO: LoadSnapshot: Item with session: kabqahahtxbdrgqfqza3zf45, reportPath: http://DEV-ad-v2/Shared Documents/Reports/Report Project3/Report1.rdl, userName: SHAREPOINTsystem not found in the database
w3wp!library!6!08/06/2007-13:02:56:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'kabqahahtxbdrgqfqza3zf45' cannot be found, ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'kabqahahtxbdrgqfqza3zf45' cannot be found
w3wp!webserver!6!08/06/2007-13:02:56:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'kabqahahtxbdrgqfqza3zf45' cannot be found
at Microsoft.ReportingServices.WebServer.HttpClientRequest.InitForRequest(CatalogItemContext context, UserContext userCtx)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderItem(ItemType itemType)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent()
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage()
w3wp!library!6!08/06/2007-13:03:06:: Call to GetPermissionsAction(http://DEV-ad-v2).
w3wp!library!6!08/06/2007-13:03:06:: Call to GetSystemPropertiesAction().
w3wp!library!6!08/06/2007-13:03:07:: Call to GetPermissionsAction(http://DEV-ad-v2/Test Reports/Report1.rdl).
w3wp!session!6!08/06/2007-13:03:10:: i INFO: LoadSnapshot: Item with session: dpeedqvwmpr3z155qsu54m55, reportPath: http://DEV-ad-v2/Test Reports/Report1.rdl, userName: SHAREPOINTsystem not found in the database
w3wp!library!6!08/06/2007-13:03:10:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'dpeedqvwmpr3z155qsu54m55' cannot be found, ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'dpeedqvwmpr3z155qsu54m55' cannot be found
w3wp!webserver!6!08/06/2007-13:03:10:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'dpeedqvwmpr3z155qsu54m55' cannot be found
at Microsoft.ReportingServices.WebServer.HttpClientRequest.InitForRequest(CatalogItemContext context, UserContext userCtx)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderItem(ItemType itemType)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent()
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage()
w3wp!library!6!08/06/2007-13:03:17:: Call to GetPermissionsAction(http://DEV-ad-v2).
w3wp!library!6!08/06/2007-13:03:17:: Call to GetSystemPropertiesAction().
w3wp!library!6!08/06/2007-13:03:17:: Call to GetPermissionsAction(http://DEV-ad-v2/Test Reports/Report1.rdl).
w3wp!library!6!8/6/2007-13:03:17:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams
w3wp!session!6!08/06/2007-13:03:21:: i INFO: LoadSnapshot: Item with session: gn34sn55qxkdwi55k2fm4y55, reportPath: http://DEV-ad-v2/Test Reports/Report1.rdl, userName: SHAREPOINTsystem not found in the database
w3wp!library!6!08/06/2007-13:03:21:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'gn34sn55qxkdwi55k2fm4y55' cannot be found, ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'gn34sn55qxkdwi55k2fm4y55' cannot be found
w3wp!webserver!6!08/06/2007-13:03:21:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'gn34sn55qxkdwi55k2fm4y55' cannot be found
at Microsoft.ReportingServices.WebServer.HttpClientRequest.InitForRequest(CatalogItemContext context, UserContext userCtx)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderItem(ItemType itemType)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent()
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage()
w3wp!library!6!08/06/2007-13:03:53:: Call to ListParentsAction(http://DEV-ad-v2/mySites).
w3wp!library!6!08/06/2007-13:03:53:: Call to ListParentsAction(http://DEV-ad-v2/mySites).
w3wp!library!6!08/06/2007-13:03:54:: Call to ListChildrenAction(http://DEV-ad-v2/mySites, False).
w3wp!webserver!6!08/06/2007-13:03:55:: i INFO: Processed folder 'http://DEV-ad-v2/mySites'
w3wp!library!6!08/06/2007-13:04:12:: Call to GetPermissionsAction(http://DEV-ad-v2).
w3wp!library!6!08/06/2007-13:04:12:: Call to GetSystemPropertiesAction().
w3wp!library!6!08/06/2007-13:04:12:: Call to GetPermissionsAction(http://DEV-ad-v2/Test Reports/Report1.rdl).
w3wp!session!6!08/06/2007-13:04:23:: i INFO: LoadSnapshot: Item with session: s5oz5evzesse5cugbxxu1wy3, reportPath: http://DEV-ad-v2/Test Reports/Report1.rdl, userName: SHAREPOINTsystem not found in the database
w3wp!library!6!08/06/2007-13:04:23:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 's5oz5evzesse5cugbxxu1wy3' cannot be found, ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 's5oz5evzesse5cugbxxu1wy3' cannot be found
w3wp!webserver!6!08/06/2007-13:04:23:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 's5oz5evzesse5cugbxxu1wy3' cannot be found
at Microsoft.ReportingServices.WebServer.HttpClientRequest.InitForRequest(CatalogItemContext context, UserContext userCtx)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderItem(ItemType itemType)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent()
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage()
w3wp!library!6!08/06/2007-13:09:54:: Call to GetPermissionsAction(http://DEV-ad-v2).
w3wp!library!6!08/06/2007-13:09:54:: Call to GetSystemPropertiesAction().
w3wp!library!6!08/06/2007-13:09:54:: Call to GetPermissionsAction(http://DEV-ad-v2/Test Reports/Report1.rdl).
w3wp!session!6!08/06/2007-13:09:57:: i INFO: LoadSnapshot: Item with session: ex2ubmetmr13vdffxciursfg, reportPath: http://DEV-ad-v2/Test Reports/Report1.rdl, userName: SHAREPOINTsystem not found in the database
w3wp!library!6!08/06/2007-13:09:57:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'ex2ubmetmr13vdffxciursfg' cannot be found, ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'ex2ubmetmr13vdffxciursfg' cannot be found
w3wp!webserver!6!08/06/2007-13:09:57:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'ex2ubmetmr13vdffxciursfg' cannot be found
at Microsoft.ReportingServices.WebServer.HttpClientRequest.InitForRequest(CatalogItemContext context, UserContext userCtx)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderItem(ItemType itemType)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent()
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage()
w3wp!library!6!8/6/2007-13:13:17:: i INFO: Cleaned 0 batch records, 0 policies, 2 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams
Thank you,
John
View 2 Replies
View Related
Sep 22, 2010
I am running a huge SSRS 2008 report and it gets rendered sometimes and sometimes it gives me an error,"The report execution has expired or cannot be found. (rsExecutionNotFound)”.
When I see SQL Server log after this issue comes I see following message there; "A significant part of sql server memory has been paged out. This may result in performance degradation. Duration: 300 seconds. Working set(KB): 97672, memory utilization 42%" .what is the issue and how to fix it.
View 21 Replies
View Related
Nov 19, 2007
Re: SSRS report viewer Execution ' ' cannot be found
(rsExecutionNotFound) Reserved.ReportViewerWebControl.axd
Every now and then, my users get this error while in the Reportviewer.
Usually, they have to close the window where the report was rendered
and pull it open again. Attempting to open the report again does not
work.
What is this?
I run the report viewer like this:
<rsweb:ReportViewer BackColor="Transparent" ZoomMode="Percent"
width="100%" ProcessingMode="Remote" ID="ReportViewer1"
runat="server">
<ServerReport ReportPath="/myfolder/myreport"
ReportServerUrl="http://myserverr/reportserver" />
</rsweb:ReportViewer>
In my web config:
<compilation debug="true" strict="false" explicit="true">
<assemblies>
<add assembly="System.Data.OracleClient, Version=2.0.0.0,
Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
<add assembly="Microsoft.ReportViewer.Common, Version=8.0.0.0,
Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
<add assembly="Microsoft.ReportViewer.WebForms, Version=8.0.0.0,
Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
</assemblies>
<buildProviders>
<add extension=".rdlc" type="Microsoft.Reporting.RdlBuildProvider,
Microsoft.ReportViewer.Common, Version=8.0.0.0, Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a"/>
</buildProviders>
</compilation>
<httpHandlers>
<add path="Reserved.ReportViewerWebControl.axd" verb="*"
type="Microsoft.Reporting.WebForms.HttpHandler,
Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a" validate="false"/>
</httpHandlers>
Thanks for any help or information.
View 1 Replies
View Related
May 1, 2007
I've got a package which reads a text file into a table and updates another. I set up configurations so that I could import it into the SSIS store on both my dev and live servers. Now, I'm getting this error. I tried removing the configs and am still getting it.
I've been through each step and everything looks okay. Does anyone have any idea (a) what's wrong, (b) how to localise the error or (c) get any additional information? Or do I just have to recreate the package from scratch?
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at PartnerLinkFlatFileImporter: The connection "" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Error at PartnerLinkFlatFileImporter [Log provider "SSIS log provider for SQL Server"]: The connection manager "" is not found. A component failed to find the connection manager in the Connections collection.
(Microsoft.DataTransformationServices.VsIntegration)
------------------------------
BUTTONS:
OK
------------------------------
View 20 Replies
View Related
Aug 23, 2007
after moving off VS debugger and into management studio to exercise our SQLCLR sp, we notice that the 2nd execution gets an error suggesting that our static SqlCommand object is getting reused from the 1st execution (of the sp under mgt studio). If this is expected behavior, we have no problem limiting our statics to only completely reusable objects but would first like to know if this is expected? Is the fact that debugger doesnt show this behavior also expected?
View 4 Replies
View Related
Dec 7, 2005
Hi I am slowly getting to grips with SQL Server. As a part of this, I have been attempting to work on producing more efficient queries. This post is regarding what appears to be a discrepancy between the SQL Server execution plan and the actual time taken by a query to run. My brief is to produce an attendance system for an education establishment (I presume you know I'm not an A-Level student completing a project :p ). Circa 1.5m rows per annum, testing with ~3m rows currently. College_Year could strictly be inferred from the AttDateTime however it is included as a field because it a part of just about every PK this table is ever likely to be linked to. Indexes are not fully optimised yet. Table:CREATE TABLE [dbo].[AttendanceDets] ([College_Year] [smallint] NOT NULL ,[Group_Code] [char] (12) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,[Student_ID] [char] (8) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,[Session_Date] [datetime] NOT NULL ,[Start_Time] [datetime] NOT NULL ,[Att_Code] [char] (1) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ) ON [PRIMARY]GO CREATE CLUSTERED INDEX [IX_AltPK_Clust_AttendanceDets] ON [dbo].[AttendanceDets]([College_Year], [Group_Code], [Student_ID], [Session_Date], [Att_Code]) ON [PRIMARY]GO CREATE INDEX [All] ON [dbo].[AttendanceDets]([College_Year], [Group_Code], [Student_ID], [Session_Date], [Start_Time], [Att_Code]) ON [PRIMARY]GO CREATE INDEX [IX_AttendanceDets] ON [dbo].[AttendanceDets]([Att_Code]) ON [PRIMARY]GOALL inserts are via an overnight sproc - data comes from a third party system. Group_Code is 12 chars (no more no less), student_ID 8 chars (no more no less). I have created a simple sproc. I am using this as a benchmark against which I am testing my options. I appreciate that this sproc is an inefficient jack of all trades - it has been designed as such so I can compare its performance to more specific sprocs and possibly some dynamic SQL. Sproc:CREATE PROCEDURE [dbo].[CAMsp_Att] @College_Year AS SmallInt,@Student_ID AS VarChar(8) = '________', @Group_Code AS VarChar(12) = '____________', @Start_Date AS DateTime = '1950/01/01', @End_Date as DateTime = '2020/01/01', @Att_Code AS VarChar(1) = '_' AS IF @Start_Date = '1950/01/01'SET @Start_Date = CAST(CAST(@College_Year AS Char(4)) + '/08/31' AS DateTime) IF @End_Date = '2020/01/01'SET @End_Date = CAST(CAST(@College_Year +1 AS Char(4)) + '/07/31' AS DateTime) SELECT College_Year, Group_Code, Student_ID, Session_Date, Start_Time, Att_Code FROM dbo.AttendanceDets WHERE College_Year = @College_YearAND Group_Code LIKE @Group_CodeAND Student_ID LIKE @Student_IDAND Session_Date <= @End_DateAND Session_Date >=@Start_DateAND Att_Code LIKE @Att_CodeGOMy confusion lies with running the below script with Show Execution Plan:--SET SHOWPLAN_TEXT ON--Go DECLARE @Time as DateTime Set @Time = GetDate() select College_Year, group_code, Student_ID, Session_Date, Start_Time, Att_Code from attendanceDetswhere College_Year = 2005 AND group_code LIKE '____________' AND Student_ID LIKE '________'AND Session_Date <= '2005-11-16' AND Session_Date >= '2005-11-16' AND Att_Code LIKE '_' Print 'First query took: ' + CAST(DATEDIFF(ms, @Time, GETDATE()) AS VarCHar(5)) + ' milli-Seconds' Set @Time = GetDate() EXEC CAMsp_Att @College_Year = 2005, @Start_Date = '2005-11-16', @End_Date = '2005-11-16' Print 'Second query took: ' + CAST(DATEDIFF(ms, @Time, GETDATE()) AS VarCHar(5)) + ' milli-Seconds'GO --SET SHOWPLAN_TEXT OFF--GOThe execution plan for the first query appears miles more costly than the sproc yet it is effectively the same query with no parameters. However, my understanding is the cached plan substitutes literals for parameters anyway. In any case - the first query cost is listed as 99.52% of the batch, the sproc 0.48% (comparing the IO, cpu costs etc support this). BUT the text output is:(10639 row(s) affected) First query took: 596 milli-Seconds (10639 row(s) affected) Second query took: 2856 milli-SecondsI appreciate that logical and physical performance are not one and the same but can why is there such a huge discrepancy between the two? They are tested on a dedicated test server, and repeated running and switching the order of the queries elicits the same results. Sample data can be provided if requested but I assumed it would not shed much light. BTW - I know that additional indexes can bring the plans and execution time closer together - my question is more about the concept. If you've made it this far - many thanks.If you can enlighten me - infinite thanks.
View 10 Replies
View Related
Aug 3, 2007
Hello :
How to execute a procedure stored during execution of the report, that is before the poster the data.
Thnak you.
View 4 Replies
View Related
Nov 29, 2004
Here's my case, I have written a stored procedure which will perform the following:
1. Grab data from a table using cursor,
2. Process data,
3. Write the result into another table
If I execute the stored procedure directly (thru VS.NET, or Query Analyser), it will run, but when I tried to execute it via a scheduled job, it fails.
I used the same record, same parameters, and the same statements to call the stored procedure.
Any idea?
View 3 Replies
View Related
Jul 7, 2006
The benefit of the actual execution plan is that you can see the actual number of rows passing through each step - compared to the estimated number of rows.But what about the "cost percentages" ?I believe I've read somewhere that these percentages is still just an estimate and is not based on the real execution.Does anyone know this and preferable have a link to something that documents it?Thanks
View 1 Replies
View Related
Jul 20, 2005
We have a brand new sql 2k server. Its all up to date on service packs(both win2k and SQL).I went in to enterprise manager and added a new db. I can run sprocsand raw sql against the new db just fine from Query Analyzer.When I try to make a dts package that refers to my new db I get thefollowing error:Error desription: deferred prepare could not be completed.Could not locate entry in sysdatabases for database 'mydbname'. Noentry found with that name. Make sure that the name is enteredcorrectly.OK, so I look in sysdatabases and see 'mydbname'. Just in case im anidiot... I actually copied the db name from that table and paste it inmy dts window.My dts package is using an "execute SQL task" to call a stored proc.To be ecxact:USE mydbnameGOEXEC MyProcWhen I click on the parse button, is when I get that error message.I have deleted the db, restarted the server, and recreated the db witha slightly different name. I can replace mydbname with pubs ornorthwind and all is ok. It just doesnt like new db's.Any help would be greatly appreciated.Thanks,Dave
View 1 Replies
View Related
Oct 10, 2007
Greetings,
I've found a bug in SQL CE 3.0/3.1. This has been confirmed to be present by other users of this and the microsoft.public newsgroups, both in the Windows CE versions and the desktop x86 versions. I got this response:
Laxmi Narsimha Rao ORUGANTI MSFT wrote:
Can you please provide the simplified repro with full VS Solution you have thru our blog: http://blogs.msdn.com/sqlservercompact/contact.aspx. First contact us and then we will exchange directly thru mail.
And that's where it has ended (after I contacted the team via the blog - no response). Other forum users have suggested that I post here repeatedly until I get a response, so that's what I'm doing. Apologies.
TIA
ID
View 12 Replies
View Related
Mar 13, 2007
Been trying to get this one but need a little input.
SELECT a.Id,g.LabName......
FROM someTbl a,table g
WHERE a.id = @idAND (b.calLab = g.ID OR g.LabName = ???)
With the above, if b.calLab = 0 then there is no entry in table g.(I didn't develop the table or would have included NONE)
So, how to tell g.LabName to come back as 'None' if b.calLab = 0?
Thanks,
Zath
View 2 Replies
View Related
Apr 14, 2008
Hello,
I'm working on a function that will return the results in a SELECT statement. But it's not being called properly, and I can't understand why it isn't working. If anyone can help me out I'd greatly appreciate it.
Here's the function code:1 FUNCTION [dbo].[UDFproduct_Search]2 ( 3 @search_string varchar(255)4 )5 RETURNS TABLE 6 AS7 RETURN 8 (9 SELECT product_id10 FROM product11 WHERE product_item_number LIKE '%' + @search_string + '%' OR12 product_part_number LIKE '%' + @search_string + '%' OR13 product_name LIKE '%' + @search_string + '%' OR14 product_commodity LIKE '%' + @search_string + '%'15 )
This SELECT statement returns the expected value:SELECT * FROM UDFproduct_Search('CABINET')
This SELECT statement returns the expected value:1 SELECT * FROM where_used WHERE product_id 2 IN(SELECT product_id FROM product3 WHERE product_item_number LIKE '%' + 'CABINET' + '%' OR4 product_part_number LIKE '%' + 'CABINET' + '%' OR5 product_name LIKE '%' + 'CABINET' + '%' OR6 product_commodity LIKE '%' + 'CABINET' + '%')
This SELECT statement returns errors:SELECT * FROM where_used WHERE product_id IN(UDFproduct_Search('CABINET') Error:'UDFproduct_Search' is not a recognized built-in function name.
I've tried adding dbo to the function call, and in various locations, but I still get the error. Hope someone can point something out I missed.
Thanks.
View 4 Replies
View Related
Apr 4, 2004
hi... i am very new to SQL server.. previously was using MySQL...
now i am trying to connect my project to SQL Server..
but i wasnt able to...
i keep getting errors
System.Data.Odbc.OdbcException: ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified at System.Data.Odbc.OdbcConnection.Open() at icms.DB.q(String mySTR) in C:icmsDB.vb:line 30
below is my webconfig
i am not very sure about the value for the user.. because if it is MySQL i can get it from my control centre.. but what about SQL server ? where should i get my value ?
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<appSettings>
<add key="db" value="icms" />
<add key="db_user" value="sqladmin" />
<add key="db_server" value="server" />
<add key="db_pwd" value="*****" />
<add key="session_timeout" value="600" />
</appSettings>
<system.web>
<compilation defaultLanguage="vb" debug="true" />
<trace enabled="true"/>
<customErrors mode="RemoteOnly" />
</system.web>
</configuration>
======================
Dim myCMD As New SqlCommand
Public Sub New()
Dim db_server = AppSettings("db_server")
Dim db = AppSettings("db")
Dim db_user = AppSettings("db_user")
Dim db_pwd = AppSettings("db_pwd")
Dim DBConnection As String = "DRIVER={SQL Server};" & _ '<==== is my driver correct?
"SERVER=" & db_server & ";" & _
"DATABASE=" & db & ";" & _
"UID=" & db_user & ";" & _
"PASSWORD=" & db_pwd & ";" & _
"OPTION=3;"
myDB.ConnectionString = DBConnection
myCMD.Connection = myDB
End Sub
'Public Function q(ByVal mySTR As String) As OdbcDataReader 'SQL Query
Public Function q(ByVal myStr As String) As SqlDataReader
myCMD.CommandText = myStr
Try
myDB.Open()
q = myCMD.ExecuteReader(Data.CommandBehavior.CloseConnection)
Catch ex As Exception
Err(ex.ToString)
End Try
End Function
Public Sub c(ByVal mySTR As String)
' COMMAND ONLY
Try
myCMD.Connection.Open()
myCMD.CommandText = mySTR
myCMD.ExecuteNonQuery()
myCMD.Connection.Close()
Catch ex As Exception
Err(ex.ToString)
End Try
End Sub
View 4 Replies
View Related
Aug 2, 2004
Hi
I have inhereted this application and I am a newbee at asp.net.
Fisrt my apologies for posting such a large amount, I just wanted to
give you all the information that I possibly can.
I have the follwoing error "Specified SQL server not found".
Server Error in '/ppasa' Application.
--------------------------------------------------------------------------------
[Microsoft][ODBC SQL Server Driver][DBMSLPCN]Specified SQL server not found.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: [Microsoft][ODBC SQL Server Driver][DBMSLPCN]Specified SQL server not found.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[COMException (0x80004005): [Microsoft][ODBC SQL Server Driver][DBMSLPCN]Specified SQL server not found.]
ADODB.ConnectionClass.Open(String ConnectionString, String UserID, String Password, Int32 Options) +0
PPASA.PPASA.OpenCloseDB(Boolean Connect) in c:inetpubwwwrootPPASAPPASA.vb:9
PPASA.Login.btnSubmit_Click(Object sender, EventArgs e) in c:inetpubwwwrootPPASALogin.aspx.vb:38
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +108
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +57
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +18
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain() +1277
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
The process of my application works as follows.
1)Login.aspx submits the username and password. It is linked to Login.aspx.vb with the following statement
<%@ Page Language="vb" AutoEventWireup="false" Codebehind="Login.aspx.vb" Inherits="PPASA.Login"%>
2)In Login.aspx.vb (below) has a call to PPASA.vb with the following statement Call OpenCloseDB(True).
Public Class Login
Inherits System.Web.UI.Page
#Region " Web Form Designer Generated Code "
'This call is required by the Web Form Designer.
<System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
End Sub
Protected WithEvents Label1 As System.Web.UI.WebControls.Label
Protected WithEvents Image1 As System.Web.UI.WebControls.Image
Protected WithEvents Label2 As System.Web.UI.WebControls.Label
Protected WithEvents txtUsername As System.Web.UI.WebControls.TextBox
Protected WithEvents Label3 As System.Web.UI.WebControls.Label
Protected WithEvents txtPassword As System.Web.UI.WebControls.TextBox
Protected WithEvents btnSubmit As System.Web.UI.WebControls.Button
Protected WithEvents btnClear As System.Web.UI.WebControls.Button
'NOTE: The following placeholder declaration is required by the Web Form Designer.
'Do not delete or move it.
Private designerPlaceholderDeclaration As System.Object
Private Sub Page_Init(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Init
'CODEGEN: This method call is required by the Web Form Designer
'Do not modify it using the code editor.
InitializeComponent()
End Sub
#End Region
Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'Put user code to initialize the page here
End Sub
Private Sub btnSubmit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSubmit.Click
Dim rs As ADODB.Recordset
Call OpenCloseDB(True)
rs = cnn.Execute("SELECT ID FROM PPASA_User WHERE Name='" & UCase(txtUsername.Text) & "' AND Password='" & txtPassword.Text & "'")
If Not rs.BOF And Not rs.EOF Then
Call PopulateUserInfo(rs.Fields(0).Value)
Server.Transfer("PPASAMain.aspx")
Else
Call ClearLoginBoxes()
End If
Call OpenCloseDB(False)
End Sub
Public Sub PopulateUserInfo(ByVal MyID As Integer)
Dim rs As ADODB.Recordset
Call OpenCloseDB(True)
rs = cnn.Execute("SELECT ID,Name,Security FROM PPASA_User WHERE ID=" & MyID)
If Not rs.BOF And Not rs.EOF Then
rs.MoveFirst()
'CurrentUser.ID = rs.Fields(0).Value
'CurrentUser.Name = rs.Fields(1).Value
'CurrentUser.Security = rs.Fields(2).Value
Session.Add("ID", rs.Fields(0).Value)
Session.Add("Name", rs.Fields(1).Value)
Session.Add("Security", rs.Fields(2).Value)
Session.Add("DonorID", 0)
End If
Call OpenCloseDB(False)
End Sub
Private Sub ClearLoginBoxes()
txtUsername.Text = ""
txtPassword.Text = ""
End Sub
Private Sub btnClear_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnClear.Click
Call ClearLoginBoxes()
End Sub
End Class
3)PPASA.vb then creates the connection to the Database. PPASA.vb looks like this.
Module PPASA
Public cnn As New ADODB.Connection
Public Sub OpenCloseDB(ByVal Connect As Boolean)
If Connect = True Then
If cnn.State = 0 Then
cnn.Open("Description=PPASA;DRIVER=SQL Server;SERVER=THE-ONESERVERA;UID=sa;PWD=123;APP=Microsoft Data Access Components;DATABASE=PPASA")
End If
Else
If Connect = False Then
If cnn.State = 1 Then cnn.Close()
End If
End If
End Sub
Public Function CheckSecurity(ByVal Actual As Integer, ByVal Required As Integer) As Boolean
If Actual >= Required Then
CheckSecurity = True
Else
CheckSecurity = False
End If
End Function
End Module
4)After I submit Login.aspx the application boms and gives me the "Specified SQL server not found".
Extra Info:
The Sql server is up and running. I have tested it by connecting with 2 test connection files index.asp and index2 .aspx.
Here are the files. The files also return results from the pubs db.
index.asp
<%
Set conn = Server.CreateObject("ADODB.Connection")
strConn="DRIVER={SQL Server};SERVER=THE-ONESERVERA;UID=sa;PWD=123;DATABASE=pubs"
conn.open strConn
sql = "SELECT * from authors"
set rs = conn.Execute(sql)
if not rs.EOF then
while not rs.EOF
lastname = rs("au_lname")
firstname = rs("au_fname")
response.write "LASTNAME :: " & lastname & " \// FIRSTNAME :: " & firstname & "<br>"
rs.movenext
wend
end if
conn.Close()
Set conn = Nothing
%>
and index2.aspx
<%@ Page aspcompat=true %>
<%
Dim objConn
Dim strConn
Dim objRs
Dim objCmd
Dim objField
strConn="DRIVER={SQL Server};SERVER=THE-ONESERVERA;UID=sa;PWD=123;DATABASE=pubs"
objConn = Server.CreateObject("ADODB.Connection")
objCmd = Server.CreateObject("ADODB.Command")
objRs = Server.CreateObject("ADODB.RecordSet")
objCmd.CommandText = "SELECT * from authors"
objConn.open (strConn)
objCmd.ActiveConnection = objConn
objRs = objCmd.Execute
If Not objRs.EOF then
Do While Not objRs.EOF
response.write ("VALUES :: ")
For Each objField In objRs.Fields
Response.Write (" " & objField.value & " \// ")
Next
response.write ("<br>")
objRs.movenext
Loop
End if
objConn.Close()
%>
There are also the following files in the bin directory.
Interop.ADOR.dll
Interop.MSChart20Lib.dll
Interop.Scripting.dll
PPASA.dll
utCharting.dll
So my question is this, why do I get the error "Specified SQL server not found", when I dont get the error with the test connection files.?
Do I have to do anything with the .dll file in the bin directory, like register them or something?
How does the Login.aspx.vb file call the PPASA.vb file when I see no reference to PPASA.vb
in the Login.aspx.vb file?
I would appreciate any help or suggestions.
Thanks
View 1 Replies
View Related
Aug 3, 2004
I have 2 server 2003 boxes one has sql 2000 and the other has IIS. I can pull up my pages on the iis server but as soon as my app tries to access the sql server I get cannot find server. All my settings are correct in the web.config file. I do not have this problem with the same setup on server 2000 boxes. Also active dir is not set up on the 2000 or 2003 boxes. Can someone please help.
thanx
weisenbr
View 3 Replies
View Related
Sep 24, 2004
I am trying to connect to my SQL Server through my ASP.NET webpages. My problem is that, no matter what I do, it always says that the server is not found. I know the IP address of my server, and this IP address works from other computers within my network, just not mine.
I have no idea what it could be. If anyone knows, any help would be greatly appriciated.
Jags
View 5 Replies
View Related
Oct 17, 2005
Hi, i have just started working with asp.net and purchased a book which has MSDE with it for database access. Ihave followed all the instructions on how to install MSDE, however when i try to set up a database using Miscrosoft ASP.NET Web Matrix, i get the error message:Unable to connect to the database server.SQL server does not exist or access denied.ConnectionOpen(Connect()).This message occurs when i am creating a new database.does anyone have any ideas why this may be happening?I have MySQL installed on my computer, could this be interfering with the MSDE ?Thanks....
View 2 Replies
View Related
Dec 15, 2001
please help me!!!
I have trouble connecting...
and i get get this error when i try to connect to my server:
Specified SQL Server not found
what to do? what to do??
robert
View 1 Replies
View Related
Dec 21, 1999
Hi,
Sometimes when I try to connect to an existing server (sql 7.0) , I get the error message "specified sql server not found-check registration properties" and it refuses to connect to it.
Has anyone encountered this before? Do help.
View 2 Replies
View Related
Dec 21, 2001
I'm attempting a connection to my sql server (running off broadband) from a page I have hosting at my new ISP.. just a standard conn string in .asp..
cn.Open "PROVIDER=SQLOLEDB;DATA SOURCE=24.10.XX.XXX.UID=sa;PWD=mypwd;DATABASE=d_ap p;"
and i get "[Microsoft][ODBC SQL Server Driver][Named Pipes]Specified SQL server not found."
From my older host I have no problems connecting to my server... so I assumed it must be something at my new host, but I'm able to connect to other remote sql servers from my new isp (for example I can connect from my new ISP to the old ISP's SQL server w/o a problem), but for some reason I can't from the new host connect to mine.. is there a setting on mine that needs to change?
newhostwebsvr to oldhostsql works... oldhostwebsvr to mylocalsql works.. newhostwebsvr to mylocalsql doesn't work??
View 1 Replies
View Related
Apr 26, 2002
Hi there,
I access to server SQL by an application on web,I configured the ODBC box for using TCP/IP and the server use also the TCP/IP.
I have this message :
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC SQL Server Driver][Named Pipes]Specified SQL server not found.
/medecin/IdentificationAcces/membre_enregistrer.asp, line 108
I don't know why there is Named Pipes in message.
Please help me
thanks in advance
Jalal
View 1 Replies
View Related
Jan 18, 2004
hi
How Can I Find VNSAPI32.dll
Please help me
View 2 Replies
View Related
Jun 3, 2007
Hello !
Can somebody help me with the following error while deploying my cube:
The attribute key cannot be found : dbo_fact_table, Column: datetime Value 25/10/1901 4:18:00 pm...
The year 1901 is included in the time period of the time dimension.
The calendar includes the following dates :
1/1/1753 - 31/12/2007 (Time binding)
Why this referential integrity error occurs ??
Please help me because it is urgent and I cannot find a solution..
Thanks
View 1 Replies
View Related
Aug 3, 2007
Hi Team
Can someone please tell me how to fix this following error in SQL 2005
When trying to create a maintenance plan,
Method Not Found:'Void Microsoft.SqlServer.Management.DatabaseMaintenance.TaskUIYtils..ctro()'
(Mircosoft.SqlServer.MaintenancePlanTasksUI)
Any assistance would help
Thanks
View 1 Replies
View Related
