Because of aleatory problems some of our Analysis Services Tasks fails and sometimes success with not know reasons. You run the task and it fails, the next time it fails, the next time is success, and so on aleatorily.
The solution of this is to put those tasks in a loop (ore someting similar) that only ends if all of the Analysis Services Tasks succeeds. If not, those tasks starts again. Do you know what I mean? How can I build this? I have investigated with checkpoints, with For Loops ... but still I dont find the way to do it.
Does anybody can help me? I suppose it's not so difficult, but I'm stuck in finding the solution...
I have an ssis package with three tasks. I want to force the execution result of the package to success all the time. I execute the package from a .net application. I tried to place my tasks in the package inside a sequence container and created a new script task which would execute when the any of the tasks in the container failed. I am setting the result of the package to success in this script task. This is not correctly working for me. Even if one task in the package failed and the last script task went to success, the .net app is receiving a failure status. Is there any way to handle this in the ssis package than in the .net app. There might be an easy way, but I am unable to find it.
We are using SSIS to load some 100k records from flat file to Oracle Destination. We are using Oracle 10g client. But during the execution after some 5hrs or 6hr with 900k records upload we are getting the message Package execution completed. In the Execution results there is no message related to success or failure and the tasks in the Data Flow where yellow in color. What might be the problem? Any information regarding this case will be helpful for us.
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
I am writing a package that i want to have email me on two possible success scenarios.
essentially, this is the conditions:
IF @result = 0 BEGIN EXEC master..xp_cmdshell @copyfile, NO_OUTPUT PRINT 'Operation Successful' END ELSE BEGIN RAISERROR ('This operation failed. Error Code:01. The source and destination files are identical.', 0, 1) END
If the first condition is met, I want to fire off an email stating success. If the second condition is met (the RAISERROR) then i want to fire off a different email.
Now, the problem is, I am not sure how to flow it. Both conditions are successful, thus it always fires off the success email if i use an "On Success" flow.
How do i capture the RAISERROR before the email to tell it which email to send?
I created a SSIS package that imports a file then moves the file to a folder called processed. I created a job that runs the package. The pack works fine when I run it from the SQL Storage Area. When I run the job I get the following message:
Started: 9:58:15 AM DTExec: The package execution returned DTSER_SUCCESS (0). Started: 9:58:15 AM Finished: 9:58:21 AM Elapsed: 6.047 seconds. The package executed successfully. The step succeeded.
showing that the job supposedly completed successfully.
I know that the package the not run because the data did not get imported and the file did not move.
Can anyone explain the package may not run but we still get a job completion status of success?
I've created a simple package that contains only one task that is an execute sql task. When I run only this single task from Business Intelligence development studio it runs successfully. But when I run the whole package (also from Business intlligence studio), the package fails.
The data source I access is ODBC. I'm sure the real reason for the error is the bad ODBC driver of the data source but this can't be changed. So I need to know what is different from running only a task in a package to running the whole package. If I knew that I might be able to adjust some setting and make it work.
I'm debugging a SSIS package in Visual Studio and I have a task that failes but the overall package is reporting success. The deployed package in SQL2005 is doing the same thing.
Task failed: FactVisitApplicationInventory
SSIS package "PACE to PACE DW PROD.dtsx" finished: Success.
The program '[4652] PACE to PACE DW PROD.dtsx: DTS' has exited with code 0 (0x0).
I have set FailPackageOnFailure=True, FailParentOnFailure=True, and MaximumErrorCount=0 on this task and am executing just this single task in Studio and I can't get the Package to report a failure.
I created a package which passes some infornmations( through parameters) to its child package.
I need to do some processing in parent package based on execution status of child package.i.e.
if child fails then some operation and if child succeeds then other operation.
To determine the status of execution of child package I am using two differnt constraint ..one constraint is having value "Success" and other having value "Failure".
My problem is that when child packge is executed successfully the constraint with value = "Success" works properly but when child fails the constraint with value "Failure" does not work.
I have already created package which loads a text file to database.I wanted to execute that package based on the availability of the file using Visual Basic,Perl or VBSCRIPT whichever is easier.Please advise.Thanks
I wrote a stored procedure that calls a DTS package that imports a file into a SQL Server table, then executes some commands on that table. How can I tell that the DTS package has completed, so that I can continue with the next command? Here is my code:
-- Run the DTS package EXEC @Result = msdb..sp_start_job @job_name = 'MyJob' WAITFOR DELAY '00:00:02'
-- Call the table that the package created SELECT * FROM <imported_table> WHERE ...
I had to insert a WAITFOR statement to make this work. Any other suggestions as to how to know when to continue?
Is there a method to either: A) Kick of a DTS package directly from a stored procedure without shelling out to the DTSRun facility. B) Kick off a scheduled job containing a DTS task from a stored procedure?
I need help from you. I am working on SSIS packages for ETL purpose. The version of SQL Server i am using is SQL Server 2005.
In Brief , the working of current ETL is as follows.
In ODS database i have 2 tables i.e Table_A & Table_B which gets loaded from another 2 staging tables A & B. And using this 2 tables data will be loaded into a target table i.e Trg_A.
The ETL packages are executed by stored procedures by creating a job within the stored procedure.
The loading of the trg table is little tricky. Before that loading of Table_A is implemented in a single SSIS package. and loading of Table_B is been implemented in another SSIS package.
In the trg table there are two columns which will be getting updated as and when each table is loaded. so for the first time if i run the package which is resposible for loading Table_A, it loads values into Table_A and once done it will updates (col1) in the target table.
Once after the complete of the execution of Package1. Now i will kick off the second ssis package which loads the data into Table_B and updates the trg table's columns (col2).
Now the actual problem what i am facing is:
For loading Table_A and updating the col1 in Trg table i will be receving more than 5 excel file every month on weekly basis. I cannot even gather all the files and run using a For-Loop counter. So presently i am loading data excel file per week .
Similarly loading of table_B.
For a week if i am executing both the packages which loads the Table_A and updates the Trg(col1) and Table_B and updates Trg(col2), then i am getting a Deadlock Error and the entire ETL is getting messed up.
Now my requirement is , Eventhough the 2 packages are run in parallel , there could certain milli seconds time difference while start of the execution in Job Monitor. I need to implement a Queing Mechanism which takes care of running the packages in a sequential manner rather than in parallel. i .e i need to ensure only one SSIS package is running in Job Monitor. Only after successful execution of either one the package, then only the second package should start its execution.
If we can implement such a queing mechanism , then my problem is solvedl.
I need some suggestions on this regard in implementing the Queing mechanism in a programatic approach using SQL Server Job Related MetaData Tables. or else is there in server parameter or initialization parameters which can be set at Database level which suffice my requirement.
Any suggestions would be greatly appreciated. Looking for sincere comments on this regards.
I have a package that has 12 data pump tasks all executing in parallel.
It is transferring raw data from an AS400 DW to a MSSQLSvr Staging area.
Each pump task on completion assigns values to a set of global variables, then having done this passes these as parameters to a sproc which inserts them into a table.
This seems to work for 4 or 5 of the pump tasks but, the rest of the rows in the table are all the same because the remaining pump tasks are all executing before the sprocs.
Is there a way to make sure that the entire set of job steps completes, before starting another job set of steps while still keeping them running in parallel.
I had wondered if there was a way to use the PumpComplete phase of each pump step to fire off the sproc, but can't see how you execute the step.
I want to finsih the execution of a DTS package from an ActiveX task. If a condition is ok, the package would continue as normal. If not, I want to finish the package without any error. Just without executing the next tasks. Do you have any idea?
I need a user to pass an input to a package from a VB form, and then want to show progress/errors in the form.
I have been able to use Application. LoadFromSqlServer and I then set pkg.Variables.(MyVariable) to the required value before calling Execute.
Works fine so far.
I dont know how to show progress. The DTSExecResult just returns a Cryptic Success /Failure status message.
Is there a way to log the errors if any to my Windows form? I have seen samples on Console Apps(see below) but I would prefer to show it in my Windows form in a text Box or something, appending each error result to the text.
TIA
Kartik
Code Snippet
Class EventListener Inherits DefaultEvents
Public Overrides Function OnError(ByVal source As Microsoft.SqlServer.Dts.Runtime.DtsObject, _ ByVal errorCode As Integer, ByVal subComponent As String, ByVal description As String, _ ByVal helpFile As String, ByVal helpContext As Integer, _ ByVal idofInterfaceWithError As String) As Boolean
I have basic knowledge of SSIS and will appreciate if some can suggest a way (with example if possible), to solve this problem.
I have an SSIS package that requires execution of another package, lets say B. This I am able to do using the 'Execute package' task. Now, what I really want to do is, I wish to check if a perticular table 'A' has rows that satisfy a given condition. In other words, I wish to execute Package 'B' onle if Table 'A' has rows. How can I do this?
I tried to execute the package,which is importing the data from the Flat file(flat file from map network drive on other computer).But Packages are created and executed on Server.While i executing that package it shows error as "Package could not be found.".
hello to every body.. well i have a problem.. well i created a package the task of which is to update thedimensions and the fact tables from the tables of source.
i created a configuration file with all the parameters that are nedded (connections managers; parameters of packages).this config file will include all the paremeters need for the execution of other packages
In that package i call an other package (execution package task). this package normally will take the parameters of the parent package isn't it??(i put the parameters of this package to the config file of the parent package).
i must also note that for the second package called there is also a package...
i must also note that i have 2 DWHs (a and b) for testing.
the problem is that when i execute the parent package to DWH b , the sacond package called do not take the parameters of the parent package. instaed it looks to its XML configuration file(in a different location of the config file of the parent package) which contains the connection parameters to DWH a and it calls strored procedures from the DWH a (instead of calling at SP from DHW b).
I have a problem in getting the info about the execution of a DTS Package.
I have a SQL-2000 Client installation on my Desktop to connect to SQL-2000 Server Database system to do all of my work. i had a DTS package stored in my SQL Server2000 Local Packages. Now i have to schedule the DTS Package from my Desktop. And the DTS package is processing some files from a shared network folder. when i used to run the DTS package manually from my desktop my desktop login have access to that shared folder so there is no problem to run the package.
suppose i scheduled the DTS to execute on daily basis at 10:00 AM. Now my doubt is wher the DTS will be executed after scheduling, which starts DTS execution and is it required my Desktop to be up daily at 10:00 AM, and how the network shared folder is going to be accessed by the DTS, means where to specify the authentication to the shared folder.
Which is the best way to execute SSIS packages? I have no problem to use dtexec command but I want it to run every night. Is this going to be done through the SQL Server (SQL Server Agent under Jobs)? Is the type going to be Operating System (CmdExec) or Transact Sql? How exactly is the command written there?
I am running into some issue that i have found any good clue on this forum... although have seen a few threads dicussions. I have a master package which invokes a dozen of child packages.
1) If I only open master package inside IDE, I am keeping getting the following error when i run the master packages inside Visual Studio 2005 IDE.
The connection type "FLATFILE" specified for connection manager "XXXXX Flat File Destination Connection Manager" is not recognized as a valid connection manager type. This error is returned when an attempt is made to create a connection manager for an unknown connection type. Check the spelling in the connection type name
2) If I opened up all child packages inside IDE, the master package run fine most of time.
I just deployed my first interface and below is the error message
failure". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "TCP Provider: An existing connection was forcibly closed by the remote host. ". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user 'EUROPExxx123$'.". End Error Error: 2008-05-09 11:01:13.00 Code: 0xC020801C Source: Load New Data Into TransDat... The package execution fa... The step failed.
The interface is just to copy the data from 1 database to another based on a date. I suspect that i could have missed a step during the deployment, can someone tell me if the error is caused me forgetting to configure something during the step up of the job or is it network related
I have 10 or so packages with package scope variables. I would like to create a package that not only runs all the packages but also sets the variables within the packages being executed.
A) Whats the best way to run all the packages from one (package??)?
B) Whats the best way to set the variables in the child packages, without having to change them manually everytime I run it.
Hi all, I am Hazara. I am trying to call a SSIS package from a web service. But package.execute() method is returning 'failure'. Though I am able to execute the same package from a normal .Net project and it is working fine (using the same code that i have used in web service).
I have also tried to execute it through stored procedure for which firstly I created a .dll in c#(which is perfectly working) and then I registered this .dll in sqlserver-2005 using following command.
CREATE ASSEMBLY asmPackageExecuter FROM 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727PackageExecuter.dll' WITH PERMISSION_SET = UNSAFE GO Now on calling the method of .dll (which is responsible to execute the package) I am getting the DTSExecResult as 'success' but data is not getting transfered from one able to other as was expected from the package.
Please help me. I have searched it everywhere on net but didn't get any solution. I want to execute package only through web-service or stored-procedure
I have a package which updates a table which contains a large amount of rows, when this package is runnning the process consumes 100% CPU and other services are crashing (SSAS, SPS, SSRS).
Is there any parameter which could be set to avoid SSIS to consume 100% of the CPU during the execution of this package ?
I have a pacakage wich loads data from a .csv file into my database. When I run the package from Visual Studio there is a Progress/Execution Results tab where I see information about the progress. I would like to insert some of these messages into my database. I tried to handle the OnProgress event with an Execute SQL Task and insert the Progress descriptions, but that doesn't seem to give all the information I see on the above mentioned tab (moreover, I get different numbers of events running the package from VS and running it programmatically from c#, why is that?).
What I really would like to get are the messages from the Progress tab which look like these:
[Agreement File [11773]] Information: The processing of file "D:****files*********.csv" has started.
[Agreement File [11773]] Information: The total number of data rows processed for file "D:****files*********.csv" is 201.
[Agreement File [11773]] Information: The processing of file "D:****files*********.csv" has ended.
[DTS.Pipeline] Information: "component "OLE DB Destination" (12598)" wrote 200 rows.
I am trying to design package which would copy all tables and stored procedures from one server to another. It used to be simple task in SQL 2000, there was wizard. However the new wizard does not work...
I wrote SSIS package, but when I execute I get the following error: "Can not apply value null to property Login..."
Any idea? It seems to me that this new SQl2005 is not that simple to use like 2000. 2000 was a great product. I am considering to rollback to 2000. Very frustrated with the new one...
I have 5 different packages out of which one needs to be run on a weekday basis. I wanted to have some kind of condition or varaiable to be set in a different Package which would determine which out of 5 packages needs to be Run.
I am thinking of setting a variable and then passing a value that would determine the particular package but then I dont know how set that in "Execute Package Task".
Hello! I'm trying to execute DTS package using dtsrun utility from MSDOS Prompt and getting error message "Cannot Open user default database '<ID>'.Using master database instead".
