I have an existing (working) SP that when I try to drop into the reoirt wizard gives me errors. The procedure runs in SQL management Studio, works in an existing rdl, even returns data in the repor wizard but also returns errors and therefore I can't continue. My work around is to drop it into an existing rdl; then I lose the Report Wizard features of generating a slick, quick repport.
View 1 RepliesWhat I am looking to do is use a complicated stored procedure to getdata for me while in another stored procedure.Its like a view, but a view you can't pass parameters to.In essence I would like a sproc that would be like thisCreate Procedure NewSprocASSelect * from MAIN_SPROC 'a','b',.....WHERE .........Or Delcare Table @TEMP@Temp = MAIN_SPROC 'a','b',.....Any ideas how I could return rows of data from a sproc into anothersproc and then run a WHERE clause on that data?ThanksChris Auer
View 4 Replies View RelatedHi,
I'm encounter lately some weird behaviour of SSRS in BIDS as well as after deploying on Reporting Server.
I'm running basic classical SQL SSRS Reports with Oracle DB connection. My reports have header and footer pagination and well defined report layer configuration. All the reports are simple based on one table and some basic parameters passed to query.
In query builder from BIDS from data tab, the query is running fine without any other execution delays. Also the query is runnign fine in PL/Dev environment.
When I switch in "Preview" mode the report hangs in execution and just showing "Report is being generated" without any resuts. After a while is generating an execution error (after 20 min).
The behaviour is the same after deployment on Report Server .
I now...here it comes...the problem is intermitent...some times the report is working...but most of the times it hangs on execution.
I checked the report from top to bottom and nothing's wrong from design perspective.
On other reports I don't have this problem and I don't understand where to start to investigate.
Any suggestions...I'm stuck here.
Thanks
Hello, I am new to MS SQL. I primarily used MySql, but my employer has MS SQL so i am trying to learn this. I kind of assumed that this was going to be similar to MSACCESS. My question is this. In access its easy to make forms and generate reports. Is there an "add-on" that makes it just as easy in MS SQL?
I see Crystal reports mentioned, but don't think my company would spend more money on this project.
Any help/Advice is greatly appreciated.
thanks
I am working with a report generator that is based on SQL Server 2000 anduses ASP as the UI. Basically we have a set of reports that end users canexecute through a web browser. In general the model works fine, but we arerunning into some scaling issues.What I'm trying to determine is, what is the optimal configuration for thissystem. It is currently a 2.4G Pentium with a large RAID and 1G of RAM. Wehave been using the "fixed" memory configuration, allocating 864M to SQL.This is on a Windows 2003 server box.This works fine when a "small" query or two is executed, but the performancesuffers terribly when several users try to run reports in parallel. A singlequery might take 10 minutes to run if nothing else is happening on the box,but if additional users log on an run reports, it's almost impossible topredict when the queries will finish.I am also looking at the effect of database size on performance, runningtests against a database with 1 month, 3 months, and say 12 months of data,running the same query against 2 databases in parallel. With the originalconfiguration, the results were all over the place, with the 12 monthdatabase outperforming the smaller dbs, while other times there was littledifference. It seems that once the system starts paging, and paging heavily,it's over; the system never "recovers" and queries that previously ran in afew minutes now take hours.I added 3 G more memory to the system, and modified boot.ini to include the/3GB switch. Now when I run the same tests, the results are much moreconsistent, as the system rarely ever has to swap. Then again I've neverseen it go past 1.7G in Task manager, making me think that any more than say2.5G of memory is a waste?Things we are trying to determine are:- in the SQL Server memory configuration, is Fixed better than Dynamic? Wehave read that Dynamic is not good at returning memory to the OS once it'sbeen allocated- What else can we do to optimize the performance for this application? Itseems to me if the indexes are properly designed, the database sizeshouldn't have that much impact on performance, but this appears to be trueonly to a point. In comparing the execution plans between say a 12 month anda 3 month database, the plans are sometimes dramatically different. I assumethis is due to the optimizer deciding that going directly to the base tablesand not using an index will result in better performance, when in reality,this doesn't always appear to be true.- Are there other SQL Server switches I should be tweaking? Is there somenumber of simultaneous queries that this configuration should be limited to?- What about other versions of SQL Server (e.g. Enterprise, Data Center,etc) would these buy us anything?Thanks for any advice,-Gary
View 2 Replies View RelatedI have only been into SQL Server for a few months, and written severalstored procedures. Is there a good software product available that willgenerate the SQL code for a stored procedure based on a visual interface?Any help is appreciated.
View 1 Replies View Related
Hi,
I am using SSRS to generate a 4 page statement... So i have a plan whose no. of Participants is 3271 rows... so While we try to export them to a PDF we will have around 13084 pages... but we cannot export so many pages at one time (it craps out). so right now we are breaking it up by start part and stop part and creating a pdf..
Is there a way that SSRS can handle so many pages at one go without any problems... if so how ??
Regards
Karen
I need a simple anf functionally CRUD Stored Procedure Code/Scripts Generator.
Anyone have a solution?
Thanks in Advance.
I am getting the following error when I attempt to deploy my test report.
"Failed to Deploy Report, The user 'XXX/IUSR_XXX' has insufficient rights to perform this action."
Has anyone gotten this error before, I have tried every permission option I could with the IUSR account by adding it to each folder etc ...and still get no resolve. Anyone have a fix for this bug ?
Responses are much appreciated!!
Hi,
I have created and deployed a data source (which uses "Credentials supplied by the user running the report") and a model which uses this data source.
Also I have built a report using Report Builder and all works well.
Now I wish to use Visual Studio to build a report, so I'm trying to create a data source from my computer which the report should use and I want it to use the model on the remote server. In the Report Wizard I am using "Report Server Model" and the following connection string:
Server="http://<remoteserver>/reportserver";datasource="/Models/MyModel"
IHowever I can't make the credentials to work. I've tried them all with no luck. What username/password must I use? Because so far nothing of what I have tried works.
Any help is highly appretiated.
Kind Regards,
Robert
problem when add RDLC report wizard to add RDL report Unable to cast object of type 'System.Xml.Schema.XmlSchemaAny' to type 'System.Xml.Schema.XmlSchemaElement'.
[URL]
View 8 Replies View Related
I created a template with a Logo, Header data and Footer data. I then copied the report to the template directory.
and renamed it report.rdl (replacing the default report that was there).
C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesProjectItemsReportProject
When I create a report using the report wizard I get the following error:
Deserialization failed: The report definition element 'Report' contains more than one child element of type 'Language' at line 362, position 4. Line 362, position 4.
Edit code
The report works just fine when I created it and did a preview.
I was hoping to create a report template that I could substitute for the default report (report.rdl) so that when using the wizard the report would be created with logos, headers and footers already there.
If I put the original report back the report wizard works just fine.
Am I doing something wrong or is this not allowed.
Hallo
I've got a problem with the Report Model Wizard, when i run them i become following error:
Invalid SQL statement; expected 'DELETE', 'INSERT', 'PROCEDURE', 'SELECT', or 'UPDATE'.
The datasource is a Access DB, when i do the same procedure with one of our other db (mssql) it works, but i need the report model to the Access DB.
Any Ideas?
Hi,
I am trying to use the report wizard and I get to the last screen where it asks for a name for the report file. The 'Next' button is not unprotected although the 'Finish' button is.
As far as I can tell I have setup the Matrix style report up correctly. If I use the 'Finish' button, Visual Studio just crashes.
The help does not give any clue and I have not found any answers in the forum.
Any ideas what the problem might be?
Hi,
Is there a way to start the report wizard from within an existing report design, I have only been able to use the report wizard when i create a new report, I would like to start the wizard with an existing report?
thanks
Hello Everyone and thanks for your help in advance. I am new to SQL Server 2005 and am trying to understand the Stored Procedure Wizard. In SQL 2000, it seems that the wizard does a lot more fo the actual generation of the sproc. Also, I haven't figured out how to change the wizard to create an update, insert, or delete sproc. I'm hoping that I'm simply not understanding how to effectively use it, but it really seems like the wizard has taken a step back. Can someone give me some insight or articles on how to effectively use this? Any help would be greatly appreciated.
View 3 Replies View RelatedHI,I have created a wizard control to collect user informations.First step : Personal informationsStep Two : Educational informationsAfter user completed and click finish button I want to add Personal informations to 'Personal' table in my sql server database.And also Educational information in to 'Educational' table.Using Stored Procedure (here it is)CREATE PROCEDURE dbo.StoredProcedure1 @Fname varchar(10), @Lname varchar(10), @Email varchar(50), @Tel varchar(20)AS INSERT INTO Personal (Fname, Lname, Email, Tel) VALUES (@Fname, @Lname, @Email, @Tel) RETURN So Now I want to add another stored procedure for Educational table.How do I do this.Should I modify this.But Educational info should goes to 'Educational' table not to 'Personal' How do I chieve this. Thanks
View 1 Replies View Relatedhas anyone ever used the Create Procedure wizard in SQL server 2000?? is that effective
View 3 Replies View RelatedSQL 2000 had a Stored Procedure Wizard and I was wondering where it is in SQL 2005 or if it even exists any more. If it is gone was an alternative created?
View 6 Replies View RelatedHello Everyone and thanks for your help in advance. I am new to SQL Server 2005 and am trying to understand the Stored Procedure Wizard. In SQL 2000, it seems that the wizard does a lot more of the actual generation of the sproc. Also, I haven't figured out how to change the wizard to create an update, insert, or delete sproc. I'm hoping that I'm simply not understanding how to effectively use it, but it really seems like the wizard has taken a step back. Can someone give me some insight or articles on how to effectively use this? Any help would be greatly appreciated.
View 3 Replies View RelatedHello:
How do I go about bringing a report down from the report server to modify it? What kind of security access will I need? The report is in production and it was created by someone who recently left the company.
Thanks in advance for your assistenance.
I am attempting to create a new report model. When I try to update statistics from the data source view I get the following error - Data is Null. This method or property cannot be called on Null values. I tried changing the generation rules so that attributes are only created for non-empty columns but that didn't help. Any assistance is appreciated. Thanks.
Hi
Bear with me I am creating my first report using sql server 2005 report wizard.
I have a query that s runs OK and returns name/addresses of companies for me to write a statement report.
My question is , how can only the 'FILLED' address column get displayed onto report and empty address fields are rejected i.e.
Address 1: 12 WoodStock Road
Address 2:
Address 3: Oxford
Address 4:
Address 5: OX10 0AB
therefore the report (page) should only display Address 1, Address 3 and Address 5
I tried to solve by trying to write an expression in 'Edit Experssion' without any joy.
Thanks in advance
anyone know where the stored procedure wizard went in sql 2005?
in 2000 it was so easy to check the type of SP you wanted and then it automatically wrote all the fields and value tsql for that - literally took 1 minute to create an insert update delete stored proc on any table.
i don't see that in sql 2005
let me know, if you know.
thanks - Jeff
Hi,
I'm totally new to SSRS2005 and I was wondering if I could extend the existing report items. For instance, I'd like to add a few extra properties to the textbox report item. I tried wrting a custom Textbox control that inherits from System.Windows.Forms.Textbox. When I imported the dll in VS, the new textbox showed up in the toolbox, but it was grayed out.
Any idea what I'm missing here?
Thanks,
Phil
Hi
View 3 Replies View RelatedIs it possible to add new data to an existing report. I already updated the SQL query, but the new data does not appear within the report. How can I modify the rows, columns and data fields???
Thanks in advance!
Hi,
I need to export a report created in SQL Server 2005 Reporting Services to one allready existing Excel workbook document. The report is deployed, so it is the deployed report I want to export. As I can see, the option are just to export to different formats, but not to a specific document
Is there an option in Reporting services that can allow me that ? Thanks.
All,
I want to retrive the column names from an existing report. The report is deployed on the report server and i want to write a code which will list all the column names of the reports along with the properties.
Is there any way i can do this. If so , please let me know. A code sample should help.
Regards..
Girija Shankar
I was using the SQL 2000 stored procedure wizard to create storedprocedures. I can create insert, delete and update SPs however I amnot able to create the select SP. The wizard does not offer the optionof selecting "select" type SP. thank you for your replyscompraj
View 1 Replies View RelatedHi there.
We have a report that has been working fine for almost a year and just recently we found a bug that when we print, the 1st 3 pages each have a single line from the table header and then the details of the table print.
The report table does have 2 subreports in detail rows. We have diligently checked to make sure that the sizes fit in both the main report and the subreports and we know that the report version did not change.
After a little digging we discovered that we recently patched RS to be version 9.2.3042. When we run the report on another RS server that is running 9.00.1406.00, it works fine. Do you know if this could be the cause? If so, is there another patch that addresses the issue?
Any help would be appreciated.
Thanks, Mike
Hi,
This seems simple but can't find. Say in my report I have 3 fields(A,B and C).
In field C I want to give a calcultion based on fields A and B. Say field C value = A+B
How do you do this? In expressions I couldn't see existing report fields, it only shows dataset columns.
Sonny