Exit DTS Package

Sep 7, 2006

Is there a way to exit an executed DTS package using Microsoft TSQL without causing an error or does this need to be in VB?

View 4 Replies


ADVERTISEMENT

Exit The Package Conditionally

Jan 4, 2007

I'm inside a "dataflow" and

i have a conditional spliter

 

one of the condition say "ok"

and the the other says "not ok"

 

when  my flow goes to the "not ok" condition

I want to Abort  the entire package execution

I want to make it sure that the package is terminated

and could not  triggers the next control in the control flow.

 

i want to kill/ abort the execution of all my SSIS processes

for the entire package within the current dataflow

 

 

View 3 Replies View Related

How To Exit A Package On Certain Conditions?

Feb 29, 2008

I have a package that runs. Inside the package I want to see if a specific table exists. If it does, I go to the next step inside the package. If it does not, I want to exit that package without errors or even warnings.

Any ideas?

Thanks.

View 6 Replies View Related

Scheduled SSIS/DTS Package Fails Periodically With Exit Code -1073741819

Oct 2, 2007

We have a vendor who has an SSIS package that executes a DTS package. We've asked that they migrate the DTS code completely to SSIS, but that is something that will not be done in the near future. The package is scheduled to run every 5 minutes through a SQL Server scheduled job. 95% of the time the package executes without an error, but occassionally the following error is reported.


Date 10/2/2007 7:35:00 AM
Log Job History (Pyxis - Data Load)

Step ID 1
Server DEVSQL1V5
Job Name Pyxis - Data Load
Step Name Run SSIS Package
Duration 00:00:03
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0


Message
Executed as user: Domain_NameSQLService. The return value was unknown. The process exit code was -1073741819. The step failed.



When I look at the DTS and SSIS package logs no errors are reported and each log indicates the package completed successfully.

Any ideas what this exit code is indicating or how to further troubleshoot the problem?

Thanks, Dave

View 4 Replies View Related

Exit SP

Mar 30, 2007

hi all,

any keyword for exit SP? like the exit sub.. which stop the Sp from next statement if one condition occured?
like :
if NOT exists (select blabla)
exit SP execution
else
(blablaba)

~~~Focus on problem, not solution~~~

View 2 Replies View Related

Graceful Exit...

Nov 9, 2006



I need to exit from an entire package if a data pump task fails in a sequence container.

I thought I'd use a script task to do this but I'd be glad to learn of any way to do this.

Thanks!

Enantiodrom

View 4 Replies View Related

Force Exit

Sep 11, 2007

Hi,

I have a package that goes out and picks up a file off of a ftp server using the ftp task. How do I force the package to stop running if the file is not there?

View 5 Replies View Related

Exit Stored Procedure

Jul 12, 2006

Hello I have three stored procedures Sp1 calls Sp2 and Sp2 calls Sp3 as follows:
 
Exec Sp1
   Inserts, updates
   Exec Sp2
       Inserts, upadtes
       Exec Sp3
           If error Exit Exec Sp1
 
Can I end Sp1 if I catch an error in Sp3

View 1 Replies View Related

SQL Analyzer Hanging On Exit

Jul 1, 2004

Has anyone seen this?

When I exit out of Query Analyzer - it hangs and gives the following error message in Event logger
Hanging application isqlw.exe, version 2000.80.760.0, hang module hungapp, version 0.0.0.0, hang address 0x00000000.

View 1 Replies View Related

Can Insert Same Exit Value For Entry

Nov 24, 2011

i have data like...

userid startdate in_out
1 2011-11-20 9.30 1
1 2011-11-20 10.30 0
1 2011-11-20 12.30 0
1 2011-11-20 12.45 1
1 2011-11-20 6.30 0

See 1-Entry 0-exit for 2011-11-20 12.30 is exit but entry time of that exit is missing....

Can i insert same exit value for entry?

View 3 Replies View Related

SQL Stmt To Exit From A Job In The ELSE Block

Mar 5, 2008

Hi experts,

I have a job that has several steps.
One of the steps is of type T-SQL. I have an IF...ELSE block in it. If the if statement is true...perform an action.
Else exit from the job reporting failure.

I would like to know what sql stmts should i use to exit from the job (in the ELSE block)
I tried to use EXIT in the else stmt but it is not exiting from the job step.


Thanks in advance

View 4 Replies View Related

Exit Stored Procedures

Jul 12, 2006

Hello I have three stored procedures Sp1 calls Sp2 and Sp2 calls Sp3 as follows:

Exec Sp1
Inserts, updates
Exec Sp2
Inserts, upadtes
Exec Sp3
If error Exit Exec Sp1

Can I end Sp1 if I catch an error in Sp3

View 7 Replies View Related

Possible Setup.exe Exit Codes?

May 8, 2007

As part of our application deployment we have wrapped and automated the SQL Server Express install by launching the setup.exe with our parameters and waiting around for the process to exit.

I had been checking for a Exit Code != 0 to detect errors returned by setup.exe but this does not appear to be foolproof. Several customers' deployments have returned non-zero exit codes, but SQL Express seems to be successfully installed.

I have not found a reference of possible codes returned and their meaning that I could use to fine tune our checking. Does one exist? Or am I going about this the wrong way and should just check for the existence of our instance after setup is complete?


thank you for any input.

View 1 Replies View Related

The Process Exit Code Was 128

Apr 1, 2008

Folks,
I have a SSIS package that works 3 out of 4 times but it does fail occasionally with the following error.

The return value was unknown. The process exit code was 128. The step failed.
I have logging enabled ..but mysteriously the log has no information on the failure..

Any thoughts ?

thanks

View 6 Replies View Related

The Process Exit Code Was 128.

Mar 20, 2008

Hi,

I am running a Sql Server 2005 job and this job is having 25 steps. Each step is calling the .dtsx packae from D: drive location. While running the job i found this error

"The return value was unknown. The process exit code was 128. The step failed."


This error occurs not for any perticular step. It occurs randomally at any step.

I am running this job on
1. Windows 2003 server with SP2
2. Sql Server 2005 (Developer Edition) with SP2

Can any one please help me out resolving this issue.

Amit

View 2 Replies View Related

Exit For Loop In SSIS

Jan 24, 2008



Hi All,

I have a SSIS package which contains For Loop Container. when a task in the for loop container fails iam setting loop value to 0, even though iam not able to exit the loop. can some help me

Note: when ever the a task in the Loop fails the loop should stop and package should stop.

View 3 Replies View Related

Help -- How Do I Exit A Foreach Loop

Jun 8, 2006

I have a foreach loop that is processing files in a directory. One of the tasks is the execute sql task that calls a stored proc. If this stored proc returns a certain value then I need to exit the loop and not process any more files. But I have been unable to figure out how to make this happen.

Any help would be greatly appreciated.

Thanks!

GN

View 5 Replies View Related

How To Exit My Outer Cursor Correctly

Apr 19, 2002

Using nested cursors, I want to exit the outer cursor, all inner cursors
have been closed.

??Where do I add the...
----------
if @c1 > 1000
break
else
continue
----------

Do I add it at the beginning of my cursor????
--------- begin ----------
open cur
fetch next... from into....
while @@fetch_status = 0
begin
if @c1 > 1000
break
else
continue

open cur

fetch next.... from into....

do some business nested inner cursors.....
set @c1 = @c1 + 1 -- increment the counter...
fetch next... from into....
end
close cur
deallocate cur
--------- end ----------
Will the 'break' take be to my end?

TIA

JeffP...
cross posted in ms.pub.sqlserver.programming

View 1 Replies View Related

Need To Alert All Users To Exit Sql Server

Aug 2, 2001

How do I configure the database so that it will send an alert to all users who are logged in and using SQL*Server, when I need them all to get out of the database ??? Or, what do I need to look up in the documentation ??? I have looked under SQL*Mail, but that doesn't look like it will work for what I am trying to do.
Any help you can give me will be greatly appreciated.
Thanks,
Nancy

View 3 Replies View Related

Stored Proc Error And Exit

Sep 15, 2000

I come from an Access/VB background where in an error trapping routine or testing for an error your statement "exit sub" ended the process. WHen using a stored procedure and you come across an error what is the best method to exit/end the stored proc?

View 3 Replies View Related

SQL Server Does Not Exit Or Access Denied

Sep 28, 2004

I am using sql server 2000 with service pack 3a

I have install same copy for database server at two windows 2000 server box with SP4.

I have been connected both server on LAN and replicate our required data from one to another. It's working fine.

In actual implementation both server would be connected via ISDN Dialup

Total distance between two server is maximum 40 KM.

I apply same method like lan on ISDN Dial up.

1. Given all permission equvallent to administrator to new user
2. Login by new user
3. Install database server at both end.
4. Dial by one place to another.
5. Ping each other by ip address.
6. By dialup place , I can ping new static IP address given by dial.
7. Dial in place I can ping both IP address newok card as well as new dialip IP
8. Search IP address (RAS Base)., Ping also to remote IP.

I didn’t ping physical network IP address. I can’t brows simply, I can’t ping domain name but I am able to ping remote IP.

I got error at the time of registration - 'Specify Sql server not found, Connection Open Connected()'

10. I try to user client network utility again get error as under-

Add 2nd server by client network utility at the another

Try to connect at got error-
Unable to connect to server test
Server msg 17 level 16 srare 1
ODBC Sql server driver [TCP/IP Socket] sql server doesn't exit

I didn't understand why I getting error in registraion of one server to another, while both can be registered to each other in LAN environment.

Let me help , I am trying to that for last 4day and night but not yet got any conclussion

Thank in advance for all of you

R.Mall

View 1 Replies View Related

Forcing Dbsqlexec To Exit Cleanly

Jul 23, 2005

I am developing a simple DB-Library program in C calling SQL Server 2000 onwindows 2003 and NT 4. I have some T-SQL code that checks for the existenceof a table and want to abort the program if the table doesn't exist. I issuea raiserror if the table doesn't exist and then call RETURN.I construct the string using sprintf and pass it dbfcnd and dbsqlexec. Sincethe commands work, there is no error to halt the execution of the program.Is there an easy, clean way to force dbsqlexec to fail? Do I need a storedprocedure to return an error code and then deal with that?Thanks for any advice,-Gary

View 3 Replies View Related

Sqlservr.exe Exit Code Of 259 (0x103) - What Does It Mean?

Mar 20, 2007

Can someone please explain what exit code 259 means as it appears in the debug output below?

When running a C# Stored Procedure within the VS 2005 IDE I receive the following Debug Output:

Auto-attach to process '[1152] [SQL] enterprise' on machine 'enterprise' succeeded.

Debugging script from project script file.

The thread 'enterprisesqlexpress [56]' (0x150) has exited with code 0 (0x0).

The thread 'enterprisesqlexpress [56]' (0x1314) has exited with code 0 (0x0).

The thread 'enterprisesqlexpress [56]' (0x1314) has exited with code 0 (0x0).

'sqlservr.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_32mscorlib2.0.0.0__b77a5c561934e089mscorlib.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.

'sqlservr.exe' (Managed): Loaded 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnSqlAccess.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.

'sqlservr.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_32System.Data2.0.0.0__b77a5c561934e089System.Data.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.

'sqlservr.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_MSILSystem2.0.0.0__b77a5c561934e089System.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.

'sqlservr.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_32System.Transactions2.0.0.0__b77a5c561934e089System.Transactions.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.

'sqlservr.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_MSILSystem.Security2.0.0.0__b03f5f7f11d50a3aSystem.Security.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.

Auto-attach to process '[1152] sqlservr.exe' on machine 'enterprise' succeeded.

'sqlservr.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_MSILSystem.Xml2.0.0.0__b77a5c561934e089System.Xml.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.

'sqlservr.exe' (Managed): Loaded 'SQL2005_Test', No symbols loaded.

'ENTERPRISE;.Net SqlClient Data Provider;4400' (Managed): Loaded 'C:WINDOWSassemblyGAC_MSILSystem.Configuration2.0.0.0__b03f5f7f11d50a3aSystem.Configuration.dll', No symbols loaded.

CurrencyCode Name ModifiedDate

------------ -------------------------------------------------- -----------------------

eee MyCurr4 3/20/2007 12:58:38 PM

(1 row(s) affected)

(1 row(s) returned)

Finished running sp_executesql.

The thread 'enterprisesqlexpress [56]' (0x1314) has exited with code 0 (0x0).

The program '[1152] [SQL] enterprise: enterprisesqlexpress' has exited with code 0 (0x0).

The program '[1152] sqlservr.exe: Managed' has exited with code 259 (0x103).



I would also appreciate hearing back from users as to why I only have two choices in my VS 2005 IDE Output window (Build and Debug). From what I've read, 'Database' should be another choice for 'Show output from:'.



My environment consists of the following:

Database:

Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)

I have verified the SQL Server connection has 'Allow SQL/CLR Debugging' enabled.

The Visual Studio 2005 IDE is:

8.0.50727.762 (SP.050727-7600)

Running Microsoft .Net Framework version 2.0.50727

View 4 Replies View Related

Process Exit Code:1073741819

Jul 13, 2006

   I have changed a SSIS package last week. Now, I met the problem that the package sometimes failed both in SQL agent and the BIDs.

  SQL agent  just give the detail: Process Exit Code -1073741819. The step failed.


   In BIDs,when I Check the log,there is even no error. But the last Infomation in the output windows is the package canceled. It just like somebody stop running package manually.

   The more strange thing is the package sometimes succeed with running the same data.

 

     Thanks for your help

 

View 18 Replies View Related

The Process Exit Code Was -1073741510

May 9, 2007

I did a few searches and found nothing. Any ideas what this error means?

View 2 Replies View Related

Process Exit Code Of Successful Command

Jul 5, 2000

I wish to have a batch file exit with a return code of 3 if it fails.
In the batch file I have the single command: Exit 3
On SQL Server the Process Exit Code of a successful command is set to 0.

Yet, when I run the job SQL Server says that it is successful.

View 1 Replies View Related

Problem With Process Exit Code (Cmdexec)

Mar 25, 2003

Can someone tell me how i can generate an exit code (Cmdexec). Ive tried running an .exe file in a job but when i do that the job hangs. When i check the history it says the exit code is somewhere in 27000. Now i'm wondering if it is possible for me to generate an exit code if the executable closes.
PS. When i run the file from a batch file it works great

View 1 Replies View Related

Exit Activex Script Without Giving An Error?

Feb 25, 2005

I am using ActiveX Script tasks to branch out on the different tasks that I have within the DTS. When I want a particular branch of tasks not to be executed, I give a "Main = DTSStepScriptResult_DontExecuteTask"

This seems to be working fine in terms of functionality, but there is an error that is displayed saying "Task reported failure on execution".

How do I get rid of this? I need to exit the task, and still just get one message box at the end of it all that happily reads "Succesfully completed tasks"

View 2 Replies View Related

Management Studio - Configure Save On Exit

Jun 14, 2007

Greetings,


I might have blown right by how to configure this...so here it goes...

In 2000 Query Analyzer I could configure whether I wanted to save any querys on exiting QA.

In SQL 2005 Management Studio where is the magical configuration bullet that will do the same thing for the query tabs????

Thanks...


bEH

View 5 Replies View Related

EXIT Installation Scripts That Have Multiple GO Statements

Oct 26, 2007

Hi All I'm Scripting various Upgrade scripts that set up roles / users / create databases etc and want to Exit the Script unconditionally if for example the user already exists etc. I can't Use RETURN because it just jumps to the Code following the next GO statement There is also some USE [Database] Statements Is there a way to do this or am I missing something fundamental here ? GW

View 5 Replies View Related

Integration Services :: Exit For Each Loop Container

Apr 22, 2015

Is there a way in a foreach loop container to exit if the foreach loop container has been executing for a certain amount of time?

View 3 Replies View Related

Execute Process Task How To Exit The Executable Program

Jan 21, 2008

Hello everybody,

Could anybody tell me how can I stop the executable program which I am using in Arguments field of Execute Process Task Editor window. My SSIS process based on three steps.

1. retrieve the file from FTP location
2. Process the file by using windows 32bit application
3. transfer the processed file back to FTP location

The problem occurs in step 2, it opens the win32 application for processing and it does process BUT after that it won't exit untill I close it manually, so it never reaches to step 3 if I don't close it.

Thanks in advance.
Zee.



View 2 Replies View Related

SQLAgent Job Failed. Process Exit Code Was -10737418

Apr 20, 2007

My overnight production job has been running for months. Duration is typically 40 minutes.

Last night it started and without doing anything, it stopped. There was nothing in the SSIS log.

SQLAgent task log reported

The return value was unknown. The process exit code was -10737418.



Usually, I can find something on Google when I enter the error code; not today.



Any ideas?

All suggestions welcomed.



IanO

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved