Greetings All,
I need to export/import the ASP.NET Membership data which is installed in my database via aspnet_regsql.exe. Does anyone have the Cliff notes on how to do this?
Thanks in advance.
A view named "Viw_Labour_Cost_By_Service_Order_No" has been created and can be run successfully on the server.
I want to import the data which draws from the view to a table using SQL Server Import and Export Wizard.
However, when I run the wizard on the server, it gives me the following error message and stop on the step Setting Source Connection
Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Error)
Messages
Error 0xc020801c: Source - Viw_Labour_Cost_By_Service_Order_No [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0014019. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
(SQL Server Import and Export Wizard)
Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)
- Setting Destination Connection (Stopped)
- Validating (Stopped)
- Prepare for Execute (Stopped)
- Pre-execute (Stopped)
- Executing (Stopped)
- Copying to [NAV_CSG].[dbo].[Report_Labour_Cost_By_Service_Order_No] (Stopped)
- Post-execute (Stopped)
Does anyone encounter this problem before and know what is happening?
Thanks for kindly reply.
Best regards,
Calvin Lam
I am attempting to import data from Microsoft Access databases to SQL Server 2000 using the DTS Import/Export Wizard. I have a few errors.
Error at Destination for Row number 1. Errors encountered so far in this task: 1.
Insert error column 152 ('ViewMentalTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 150 ('VRptTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 147 ('ViewAppTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 144 ('VPreTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 15 ('Time', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
Could you please look into this and guide me
Thanks in advance
venkatesh
imtesh@gmail.com
Hi all,
It looks like these options are only available in the SQL Server Management Studio? I installed SQL Server Management Express Studio and I can't even find the DTSWizard.exe on my machine.
Can you please help how I can import data from excel or where can I download the SQL Server Management Studio?
Your prompt response is greatly appreciated.
Thanks!!
Tram
Hi
I am using CSV (comma delimeted file) for exporting data from sql server table to CSV and then import to sql server from the CSV.
Now I have a problem, I could sucessfully export the data to CSV, but one of the field which has whole html for each product is giving me problem, It wouldnt save in one cell as for other data items in a record are. If I remove that field, the rest of records are exported okay, but with this one, it do export, but the data wouldnt go to one cell of the excel file and hence wouldnt work in importing to sql. I guess some tags in the string is creating problem plus also what should I do if the string already have comma as data, and we use comma as delimiting character.
Any kind of help greatly appreciated
EDIT:
Below is a sample of html thats already saved in one field but wouldnt come to one excel cell when exported to CSV...
<P><TABLE class=content cellSpacing=0 cellPadding=2 width="100%" border=0><TBODY><TR vAlign=top><TD><STRONG>Product</STRONG></TD><TD>XXXX</TD></TR><TR vAlign=top><TD width="46%"><STRONG>XXXX</STRONG></TD><TD width="54%">XXXX </TD></TR><TR vAlign=top><TD><STRONG>XXXX</STRONG></TD><TD>XXXX</TD></TR><TR vAlign=top><TD><STRONG>XXXX</STRONG></TD><TD>up to 4MB/s</TD></TR><TR vAlign=top><TD><STRONG>XXXX</STRONG></TD><TD>XXXXX<TR vAlign=top><TD><STRONG>XXXX</STRONG></TD><TD>XXXX</TD></TR></TBODY></TABLE><TABLE class=content cellSpacing=0 cellPadding=2 width="100%" border=0><TBODY><TR vAlign=top><TD><STRONG>XXXXX</STRONG></TD><TD>XXXXX</TD></TR><TR vAlign=top><TD><STRONG>XXXX</STRONG></TD><TD>XXXX</TD></TR><TR vAlign=top><TD><STRONG>XXXX</STRONG></TD><TD>XXXXX</TD></TR></TBODY></TABLE><A href="http://www.xxx.xxx" target=_blank><BR><BR>xXXX</A><BR><BR>Â </P>
Regards
Mykhan
Hi every body
I have 2 databases called Tax and News
There is a table in database Tax called table table1(id, Title,Content)
There is a table in database News called table table2(id, Headline,Body)
How can I copy(append) data from table1 to table2 with mapping Title -> Headline and Content -> Body
Any answers would be appreciated.
Hi Everyone..
I want to import and export sql tables to dbase IV or any other format..But i want to run DTS Wizard from inside VB6.. IS it possible .. or if you guys know some other method to import and export tables in which i can provide the choice to transfer into any other format..please let guide me i'll be obliged..
Tahir
Hi,
I am trying Express Edition 2005 but could not found GUI init, can someone advsie that which SQL Server 2005 provides GUI and which one is more friendly to import/export data- thanks
AA
how to import/export data with sql express?
View 7 Replies View RelatedIm using the sql import/export features to transfer a database from one server to another. For some reason when I am transfering tables with primary keys when I look at the new database on the other server it doesnt seem to hold the primary key info. Can anyone tell me why and how i can preserve this info so I dont have to go back through and reset this info.
thanks
Hello everyone,
I'm having difficulties in Importing data using DTS with a SQL Query.
The Sql query :
SELECT *
FROM Organisations
where Organisations.OrganisationID = 1
I receive this Error Message :
Error Source : Microsoft OLE DB Provider for SQL Server
Error Description : Deferred prepare could not be completed.
SELECT permission denied on object 'Organisations', database 'souce_db', owner'dbo'.
Context : Error calling GetColumnInfo. Your Provider does not supprt all the interface/methods required by DTS.
Can anybody help me . Thanks
How to refresh table data on sqlserver without dts or backup/restore whole database.
In sqlserver, is there a way to import table(s) data (like import export in oracle) in a file and export to another unconnected server/db.
Please advice.
Hi,
I have two environements:
1) Development (Full access to SQl Server 2005)
2) Hosting SQL Server 2005, ONLY accees to the database MYDatabase, NO access to master
I would like to copy a table from my development to hosting. I would like to have an exact replica of the table in hosting. I DO NOT want to copy the whole database, just a table. I was able to do this without problems in SQL 2000/Enetrprise Manager.
I have tried to copy the table using the new import/export data wizard. I did enabled Identity Insert option. There are few problems:
1) The drop table and recreate option (under Mappings) is disabled, I can not check it. IS THIS a BUG? I have latest SP 3 aplplied
2) When I just run it I get the following errors. Also the problem is that it runs in trunsaction, I was hoping it would skip the duplicate records and just copy the ones I need. Seems it is all or nothing, very common problem in Windows based systems (same problem in Explorer when copying files)
3) I was hoping that such a simple task as mirroring a table would be easly achieved, please help
Messages
Information 0x402090df: Data Flow Task: The final commit for the data insertion has started.(SQL Server Import and Export Wizard)
Error 0xc0202009: Data Flow Task: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "The statement has been terminated.".An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Violation of PRIMARY KEY constraint 'PK_classifieds_HotelRoomTypes'. Cannot insert duplicate key in object 'dbo.classifieds_HotelRoomTypes'.".(SQL Server Import and Export Wizard)
Information 0x402090e0: Data Flow Task: The final commit for the data insertion has ended.(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - classifieds_HotelRoomTypes" (37) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.(SQL Server Import and Export Wizard)
Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0202009. There may be error messages posted before this with more information on why the thread has exited.(SQL Server Import and Export Wizard)
I have a database in 3rd normalized form and want to export data and import it in a copy of that database. Is there a way for the import/export wizard to unload and reload the data in the right order, so that parent tables are loaded before child tables? If the import export wizard can't do that, what other options are available?
View 2 Replies View RelatedI am new in MSSQL server. I need export users IP address from SCCM. I have a CSV file with lot of IP address. I need import those IP address and export same IP address and users samaccountname.
View 3 Replies View RelatedI needs export data on table to text file so I can process this data
with another database engine ie. Informix.
Can anybody help me to solve this problem ?
I'm noticed that in sql server 2005 express edition do not have import/export tools which is found in sql server 2000. Is it not supported only in this version or I have to upgrade my sql to other version to have this facility?
View 1 Replies View RelatedI'm just beginning to use SSIS (bracing for a steep learning curve due to lack of helpful documentation) and am starting out trying use the Import and Export Wizard. On the "Choose a Data Source" page there is a dropdown for the Data Source. I see a list of possible data providers, but not one of "Microsoft OLE DB Provider for ODBC drivers," which is the one I wanted to use because I'm trying to connect to an obscure database. So I figured that I need to use ".Net Framework Data Provider for Odbc." Unfortunately, regardless of what I enter for the Connection string or the Dsn or the Driver I invariably get an error, although it's somewhat dependent on that I have entered for those three items.
Either this (when I type in a DSN)
Cannot get the supported data types from the database connection "Dsn=Terrascan_Okanogan_WA".
or this (if I enter a full connection string and a driver)
The operation could not be completed.
------------------------------
ADDITIONAL INFORMATION:
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
of this (if I enter a DSN and a driver)
Cannot get the supported data types from the database connection "Dsn=Terrascan_Okanogan_WA;Driver={SmartWare Driver}".
------------------------------
ADDITIONAL INFORMATION:
Specified cast is not valid. (System.Data)
So I have a couple questions. First, why doesn't "Microsoft OLE DB Provider for ODBC drivers" appear in the list of data sources, and secondly, when using the ".Net Framework Data Provider for Odbc" data source what inputs are expected because whatever I'm doing doesn't seem to work?
I recently learned to use SSIS to import a database from a SQL 2005 server to a local SQL 2005 development server. It was working fine for a custom database, but now I'm trying to use it on the membership tables that ASP.NET creates to manage login, profile, and so on.
I created the package, specifying that I wanted to delete data in the destination, and turning on identity insert. I only need the data in a few of the tables, so I am not copying empty tables. When I run it, I get the error:
[Execute SQL Task] Error: Executing the query "TRUNCATE TABLE [aspnetdb].[dbo].[aspnet_Roles] " failed with the following error: "Cannot truncate table 'aspnetdb.dbo.aspnet_Roles' because it is being referenced by a FOREIGN KEY constraint.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
How can I safely allow it to overwrite the foreign key constraints? Is there a special procedure I need to use with membership (aspnetdb) data? I am just beginning with this, so this is probably an elementary question. Thanks for any links or explanations you might know of.
I am trying to import data from SQL 2000 to SQL 2005
The Data schemas are the same in both (tables, relationships, key and triggers).
Using the wizard I am trying to import data from SQL 2000 to SQL 2005. The issue I face is to manage the Idenity columns. I do not want the identity values from the SQL 2000 DB which may be at say 5000, instead I want to use the identity values from the SQL 2005 database which will problably start at 1
Is there a way to do this, should I use a custom query instead of a direct table dump. If using a custom query do I need to just specify a Select query or does it have to be a specific "INSERT INTO Table ..." type query
If I do import the data directly with Identity "ON" how can I advance the identity column value to current +1 on the SQL 2005 table.
Thanks
javahar
hello ,
I want to download data from an AS/400 to a SQL 2005 Database.
Within Sql server 2000 it was possible to do more than 1 transformation with just 1 source connenction and 1 destination.
In SSIS I have created:
- new solution
- data source
- Data source viewer ( I made named queries to format the data as i want it to be in Sql)
Although it is possible to view the named query data it does not seem to be possible to import the data in the data viewer into my sql 2005 database. (For each dataflow I have to define each query again)
I have added the data source in the connection manager.
Also I am searching to import more than 1 file in 1 package !
I can use however a Dts-2000 package but why then use SQL server 2005
Hope somebody can help me
Regard,
Ronny
Hi All,
Do you have any idea why I am not getting any ODBC in import / export Data Source list???
I am trying to link connection with Informix Server through ODBC, same ODBC is working good with ACCESS.
I am using SQL Express 2005
Using Windows Authentication
Thanks for your help in advance
AA
Not seeing the Review Data Type Mapping Screen in SQL Server Import and Export Wizard?
Is there only a certain version where that screen shows up?
I am trying to import data from an MS Access application to SQL Server and all of the connections are good, but some of the data isn't and if I let it migrate using this tool it crashes on the bad data and there is no data that migrates. The Review Data Type Mapping screen will allow me to bypass the records in error and load the rest. however, I can;t do that if I cannot see the screen.
Greetings.
Our company is planning to upgrade to ESRI's brand new ArcSDE Personal edition and SQL Server Express 2005 platform to do GIS work for our clients. We are not in a position at this time to migrate to the full ArcGIS Server and SQL Server 2005 platform. We currently use a Microsoft Access 2003 relational database, and have no intention to move to Access 2007.
ArcSDE Personal cannot connect to SQL Server 2005, but it is able to connect and work with SQL Server Express 2005.
In SQL Management Studio Express, we were unable to find any feature that would allow us to import and export data to/from SQL Server Express. This is rather unusual, as we need to test how SQL Server Express will handle import and export data. In Microsoft Access we simply right click and choose import or export in the database window. Easy as pie. We ran the upsize wizard in Microsoft Access to migrate our data. But after that, our GIS team was pretty much stuck.
My question is, how does one import/export data to/from SQL Server Express? Do we need to install a missing component? Is scripting required? Or should we wait until we are able to acquire the SQL Server 2005?
D. Schmid, M.Sc.
North/South Consultants Inc.
Winnipeg, Canada
Where is a package visible when running the Data Import/Export wizard, choosing to save a package, and choosing "SQL Server" as the location? When I make an SSIS connection in Management Studio I do not see the package under the "MSDB" node.
View 4 Replies View RelatedI am trying to import an Excel file into SQL Server 2005 using the SSIS import/export wizard; however, Microsoft Excel doesn't show up in the list of the data sources. I am assuming that something else must be install from either Microsoft Office or SQL Server 2005. I am using Microsoft Office 2003 on a Window XP machine. Does anyone know what I need to do to correct this.
Thanks,
Tim
After some weeks evaluating tools and platforms for developing an application, I decided to move to SQL Server 2005 Express Edition. Everything was fine till last night, when after creating my tables, I needed to populate them. I tried to find the Import and Export Data Wizard that SQL Server 7.0 and 2000 used to have, but great was my surprise when I found - in this forum - a post that said that it's not available in the Express Edition.
I'll have to move back in time (what I hate) to remember the way BCP worked. Can somebody post some examples to not start from zero ? Does anybody know a third party visual tool that can import/export data from text files to a SQL Server DB via ODBC ?
What's the reason it was not included in the EE ?
THanks !
I have several versions of SQL Server and have been using SQL 2008 on a regular basis due to this issue. Our SQL 2014 when I do the Import Data process, it opens up the dialog window, hit next, and the data source is currently defaulting to ".NET Framework Data Provider for IBM i" - when it does this it immediately errors out with:
"An error occurred which the SQL Server Integration Services Wizard was not prepared to handle.
Additional Information:
> Exception has been thrown by the target of an invocation (mscrolib)
>> Failed to find or load the registered .NET Framework Data Provider (System.Data)"
It immediately crashes/closes the Import/Export wizard with me unable to change the data source to what I need it to be.
My 2008 defaults to SQL Server Native Client 10.0 and does allow me to change to that same option (at which point it errors) but it does not close the wizard.
I need a way to either:
> Default the starting Data Source to be something else
> Fix whatever error is causing it to crash - I am at a loss as to what the error is looking for
> Not have the wizard crash whenever it defaults to this source.
Any of the above solutions would work fine - but at the moment I am unable to use the Import/Export wizard at all in SQL 2014.
Should I be able to use a SQL Server Compact Edition sdf file as the data source for the SSIS Import and Export Wizard?
When I select the .net Framework Provider for compact Edition from the data source drop down, I get a message box with "An error occured which the SSIS Wizard was not prepared to handle. Exception has been thrown by the target of an invocation. (mscorlib) Specified method is not supported. (System.Data.SqlServerCe)"
We have a user with a sdf file that will no longer sync, so we wanted to get her data from sdf file tables into SQL Server tables quickly and easily. Since the SSIS wizard wouldn't work with the sdf data source, we copied SQL Server Mgmt Studio query results into an Excel spreadsheet via the Clipboard, them imported those records with SSIS. But we need a repeatable process in case this happens in the future.
We tried to reinitialize her merge replication subscription with SQL Server Mgmt studio, and with C# code, but none of that would work.
How many MS data provider options are available for SQL Server compact edition? I see ".Net Framework Data Provider for Microsoft SQL Server Compact Edition" in the SSIS data source drop down, but shouldn't I also see an OLE-DB Provider for SQL Server Compact Edition?
This is all on my XP workstation where I can successfully write C# code for SQL Server Compact data access with Assembly = System.Data.SqlServerCe = C:Program FilesMicrosoft Visual Studio 8Common7IDEPublicAssembliesSystem.Data.SqlServerCe.dll. So I think I have the proper tools installed.
Thanks.
I am trying to simplify a query given to me by one of my collegues written using the query designer of Access. Looking at the query there seem to be some syntax differences, so to see if this was the case I thought I would import the database to my SQL Server Developer edition.
I tried to start the wizard from within SQL Server Management Studio Express as shown in one of the articles on MSDN which did not work, but the manual method also suggested did work.
Trouble is that it gets most of the way through the import until it spews forth the following error messages:
- Prepare for Execute (Error)
Messages
Error 0xc0202009: {332B4EB1-AF51-4FFF-A3C9-3AEE594FCB11}: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Could not start session. Too many sessions already active.".
(SQL Server Import and Export Wizard)
Error 0xc020801c: Data Flow Task: The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009.
(SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task: component "Source 33 - ATable" (2065) failed the pre-execute phase and returned error code 0xC020801C.
(SQL Server Import and Export Wizard).
There does not seem to be any method of specifying a number of sessions, so I don't see how to get round the problem.
Does anyone know how I can get the import to work?
I'm trying to export data from a SQL Server 2005 database to a DB2 database through SSIS. However, I keep getting an error that says "Could not retrieve table list" with Invalid Conversion. SQLSTATE=07006. Does anybody have any ideas or what the problem could be?
-Kyle
[Source - chn_employee_vew_test_txt [1]] Error: Data conversion failed. The data conversion for column "Column 42" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
[Source - chn_employee_vew_test_txt [1]] Error: The "output column "Column 42" (136)" failed because truncation occurred, and the truncation row disposition on "output column "Column 42" (136)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
I using Locale (People's Republic of China) and code page of 936 (Simplied Chinese GBK) with header row delimiter {CR}{LF}.
I am using flat file import method.
Whenever the server process the Column 42 with value "11,Nanjing Rd.W, China" which contain 'comma' or '.' it will hit error importing with above message. When i manually change the column value to non comma or '.' (11 Nanjing Rd W China) in the flat file it is ok.
I am using SQL server 2005.
Please advise what need to be done to avoid this error ?
Thanks in advance and any idea or suggestion is very much appreciated as i have try to solve this issue for over a week but still not able to find any answer on it.
Please help.
regards,
kong
[Source - chn_employee_vew_test_txt [1]] Error: Data conversion failed. The data conversion for column "Column 42" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
[Source - chn_employee_vew_test_txt [1]] Error: The "output column "Column 42" (136)" failed because truncation occurred, and the truncation row disposition on "output column "Column 42" (136)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
I using Locale (People's Republic of China) and code page of 936 (Simplied Chinese GBK) with header row delimiter {CR}{LF}.
I am using flat file import method.
Whenever the server process the Column 42 with value "11,Nanjing Rd.W, China" which contain 'comma' or '.' it will hit error importing with above message. When i manually change the column value to non comma or '.' (11 Nanjing Rd W China) in the flat file it is ok.
I am using SQL server 2005.
Please advise what need to be done to avoid this error ?
Thanks in advance and any idea or suggestion is very much appreciated as i have try to solve this issue for over a week but still not able to find any answer on it.
Please help.
regards,
kong