Can someone tell me if there's a way to export data from one database to another without losing the primary key information that has been set in the source database?
Please respond to URL. Thanks!
CC
Hi,
i am using the enterprise manager of our sql server 2000. i want to
export some (not all) tables from one DB to another one with all the
data inside these tables AND the primary keys. if i do i only receive
the tables with the data but all primary keys and indexes will be lost.
how to do it?
thanks, tobi
I am really new to SQL Server so be patient i guess. I have installed sql server 2005 on my home computer but at first i wasnt able to connect to the server at school where i had started creating tables already. Instead of going up to the school i opted to do it from home and start over. Well I am wondering if there is a way to copy all the tables that i have created on my home computer and just import them into the database on the server at school. Hope this isnt confusing. Anyways, this forum always has helped me in the past, so i am confident someone will be able to point me in the right direction. Thanks in advance.
View 3 Replies View RelatedHello, How can I copy a table from one database to another database with SQL Server Management Studio.Thanks,Curt.
View 5 Replies View RelatedI€™m trying to copy data from production to my local machine using the SQL Server 2005 import and export wizard. It works fine if I select a small number of tables but throws errors
When there€™s a lot of tables. Have you ever experienced problems using it? Is there a better way to transfer the data?
the data source is SQL Server 2000 and the target is 2005. I have the optimize for many tables and transaction options selected
Here€™s the errors I get
Execute the transfer with the TransferProvider. (Error)
Messages
· ERROR : errorCode=-1073451000 description=The package contains two objects with the duplicate name of "output column "ErrorCode" (49)" and "output column "ErrorCode" (14)".
helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
· ERROR : errorCode=-1073451000 description=The package contains two objects with the duplicate name of "output column "ErrorCode" (31)" and "input column "ErrorCode" (52)".
helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
· ERROR : errorCode=-1073451000 description=The package contains two objects with the duplicate name of "output column "ErrorCode" (49)" and "output column "ErrorCode" (14)".
helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
· ERROR : errorCode=-1073451000 description=The package contains two objects with the duplicate name of "output column "ErrorCode" (31)" and "input column "ErrorCode" (52)".
helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
· ERROR : errorCode=-1073451000 description=The package contains two objects with the duplicate name of "output column "ErrorCode" (49)" and "output column "ErrorCode" (14)".
helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
· ERROR : errorCode=-1073451000 description=The package contains two objects with the duplicate name of "output column "ErrorCode" (31)" and "input column "ErrorCode" (52)".
helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
· ERROR : errorCode=-1073451000 description=The package contains two objects with the duplicate name of "output column "ErrorCode" (49)" and "output column "ErrorCode" (14)".
helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC} (Microsoft.SqlServer.DtsTransferProvider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
Hi all,
I use the following 3 sets of sql code in SQL Server Management Studio Express (SSMSE) to import the csv data/files to 3 dbo.Tables via CREATE TABLE & BUKL INSERT operations:
-- ImportCSVprojects.sql --
USE ChemDatabase
GO
CREATE TABLE Projects
(
ProjectID int,
ProjectName nvarchar(25),
LabName nvarchar(25)
);
BULK INSERT dbo.Projects
FROM 'c:myfileProjects.csv'
WITH
(
FIELDTERMINATOR = ',',
ROWTERMINATOR = ''
)
GO
=======================================
-- ImportCSVsamples.sql --
USE ChemDatabase
GO
CREATE TABLE Samples
(
SampleID int,
SampleName nvarchar(25),
Matrix nvarchar(25),
SampleType nvarchar(25),
ChemGroup nvarchar(25),
ProjectID int
);
BULK INSERT dbo.Samples
FROM 'c:myfileSamples.csv'
WITH
(
FIELDTERMINATOR = ',',
ROWTERMINATOR = ''
)
GO
=========================================
-- ImportCSVtestResult.sql --
USE ChemDatabase
GO
CREATE TABLE TestResults
(
AnalyteID int,
AnalyteName nvarchar(25),
Result decimal(9,3),
UnitForConc nvarchar(25),
SampleID int
);
BULK INSERT dbo.TestResults
FROM 'c:myfileLabTests.csv'
WITH
(
FIELDTERMINATOR = ',',
ROWTERMINATOR = ''
)
GO
========================================
The 3 csv files were successfully imported into the ChemDatabase of my SSMSE.
2 questions to ask:
(1) How can I designate the Primary and Foreign Keys to these 3 dbo Tables?
Should I do this "designate" thing after the 3 dbo Tables are done or during the "Importing" period?
(2) How can I set up the relationships among these 3 dbo Tables?
Please help and advise.
Thanks in advance,
Scott Chang
How can I Export Database with foreing Key and primary key.
Operation is that
SQL2005 Management Studio/Database/Tasks/Export Data
Before Version is SQL2000 we can Selected Copy Object and data between server and then Use Default Options click checked and Select Copy Index, Copy Foreing Primary key vs vs
But this options is not found in the SQL2005 Management Studio/Database/Tasks/Export Data wizard or I can't found it.
How can I export foreing Key and primary key with SQL2005 Management Studio/Database/Tasks/Export Data wizard.
Best Regards,
Athena.
Hi!
I just used the SSIS Import and Export Wizard to copy 50+ tables from SS05 to SS2K.
I found that the wizard created a package that I could not figure out how to edit, e.g., to change whether or not it had to CREATE a table, or just use an existing one. (I created some problems by manually editing the receiving table names to be ones that already existed -- but the original names it had did not exist, so it knew it had to create them. What I should have done, and eventually ended up doing, was scroll through my list of tables in the "receiving" box; I just figured editing the name would be faster, not realizing what problems I would create for myself.)
Anyhow, now that I see the complex package that the wizard creates, with a LOOP over the 50+ tables, I would like to know how/where in the package it is storing the information about the tables to copy.
Basically the wizard creates the following Control Flow tab entries (in processing sequence order):
an Execute SQL Task: NonTransactableSql
an Execute SQL Task: START TRANSACTION
a Sequence Container: Transaction Scoping Sequence, which contains
an Execute SQL Task: AllowedToFailPrologueSql
an Execute SQL Task: PrologueSql
a Foreach Loop Container, which contains
a Transfer Task with an icon I did not notice in the Toolbox
an Execute Package Task: Execute Inner Package
an Execute SQL Task: EpilogueSql
an "on success" arrow to
an Execute SQL Task: COMMIT TRANSACTION
an Execute SQL Task: PostTransaction Sql
an "on failure" arrow to
an Execute SQL Task: ROLLBACK TRANSACTION
an Execute SQL Task: CompensatingSql
Where, and how, can I look within this package to see the details about the tables I am transferring? I see that one of the Connection Managers is "TableSchema.XML" -- but it points to a temporary file on my hard drive, that I presume is populated by the package. Where does it get its information?
This is certainly much more complex than the package I would have written, based on my limited knowledge of SSIS. I would have been inclined to create 50+ Data Flow tasks, one for each table.
So now I'm trying to understand why the Wizard created this more-complex package.
Any help will be appreciated, including references to non-Microsoft books/websites/etc.
Thanks in advance.
Dan
A view named "Viw_Labour_Cost_By_Service_Order_No" has been created and can be run successfully on the server.
I want to import the data which draws from the view to a table using SQL Server Import and Export Wizard.
However, when I run the wizard on the server, it gives me the following error message and stop on the step Setting Source Connection
Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Error)
Messages
Error 0xc020801c: Source - Viw_Labour_Cost_By_Service_Order_No [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0014019. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
(SQL Server Import and Export Wizard)
Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)
- Setting Destination Connection (Stopped)
- Validating (Stopped)
- Prepare for Execute (Stopped)
- Pre-execute (Stopped)
- Executing (Stopped)
- Copying to [NAV_CSG].[dbo].[Report_Labour_Cost_By_Service_Order_No] (Stopped)
- Post-execute (Stopped)
Does anyone encounter this problem before and know what is happening?
Thanks for kindly reply.
Best regards,
Calvin Lam
I am attempting to import data from Microsoft Access databases to SQL Server 2000 using the DTS Import/Export Wizard. I have a few errors.
Error at Destination for Row number 1. Errors encountered so far in this task: 1.
Insert error column 152 ('ViewMentalTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 150 ('VRptTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 147 ('ViewAppTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 144 ('VPreTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 15 ('Time', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
Could you please look into this and guide me
Thanks in advance
venkatesh
imtesh@gmail.com
I am trying to simplify a query given to me by one of my collegues written using the query designer of Access. Looking at the query there seem to be some syntax differences, so to see if this was the case I thought I would import the database to my SQL Server Developer edition.
I tried to start the wizard from within SQL Server Management Studio Express as shown in one of the articles on MSDN which did not work, but the manual method also suggested did work.
Trouble is that it gets most of the way through the import until it spews forth the following error messages:
- Prepare for Execute (Error)
Messages
Error 0xc0202009: {332B4EB1-AF51-4FFF-A3C9-3AEE594FCB11}: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Could not start session. Too many sessions already active.".
(SQL Server Import and Export Wizard)
Error 0xc020801c: Data Flow Task: The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009.
(SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task: component "Source 33 - ATable" (2065) failed the pre-execute phase and returned error code 0xC020801C.
(SQL Server Import and Export Wizard).
There does not seem to be any method of specifying a number of sessions, so I don't see how to get round the problem.
Does anyone know how I can get the import to work?
I'm trying to export data from a SQL Server 2005 database to a DB2 database through SSIS. However, I keep getting an error that says "Could not retrieve table list" with Invalid Conversion. SQLSTATE=07006. Does anybody have any ideas or what the problem could be?
-Kyle
When I export a table from my local SQL Server to my web-host's SQLServer, the primary key never seems to export. This happens whether Iuse the "Copy tables and views..." option or the "Copy objects anddata..." option. Anybody know why this happens?
View 3 Replies View RelatedCurrently, I'm exporting a database from production to local (test)machine. I've done this several times without problem, but during thelast few days, the primary keys have failed to export. Would anyoneknow what options might keep the keys from exporting?Thanks,Louis
View 3 Replies View RelatedI have two practice tables I have created and want to export the values of one into the source table. I want to know if I can export into a table and have the destination table automatically give a primary key value to a record? I haven't been able to figure this out even after fiddling with the "Enable identity insert" checkbox under the Column Mappings tab. I have created source tables with and without primary keys and neither works because of the fact that I need to have a value for a primary key in order to INSERT into the destination.
Do I have to copy the source records into a staging table and assign the PK values myself by hand? This can't be the answer.
ddave
Hi guys,
I need to import a database from Sybase database. Tell me the best way in solving this issue.
I had already tired using DTS package, which is not working properly, since i could not get Primary keys, foriegn keys. But i am able to get rows back. It is real pain in bud to write a script to create Primary keys and foreign keys.
Is there is any way to solve this issue.. If so, let me know ASAP.. since i have a deadline by this week end..
Please solve this issue....
Thanks folks..
urs
VJ
Can somebody tell me, if I want import dat from db2 on ibm mainframe, do I need a separate Odbc driver
View 2 Replies View RelatedI am trying to design an import/export utility but
keep coming up against the problem of row and column delimiters.
Our data has every possible combination of delimiters in the data itself
so of course this causes the import to fail.
Basically I need a way to export and import a given table to a text file.
Is there any way to solve this without continually worrying about delimiters.
Q: Whenever I do import or export one database to another in SQL7, it does transfer all objects and it fails at users/permission transfer. I tried different options but the same. The odd thing when you look at the error msg every time it fails at different user.
Thanks
newbie...
I have a development environment and a test environment...
I would like to create a batch file of sorts in which I can backup (I would export in oracle) the development environment, objects and data, and restore (import in oracle) forced restore over the test environment. The reason for this is that we are a fast paced development team and it is important for us to update the test environment on demand. This may happen two-three times a day and the dba (me) is not always available to perform this task.
thank you,
joe
Can anyone tell me how can i have import/ export to/from CSV files programmatically?
Regards
When I run select @@servername
I get result NULL
Actually I am trying to transfer data and tables from production server to devlopment server. When I try it I get a error 'You cannot copy objects when the source and destination databases are same'
Database Name is same but I have source & destination server is different. Is it because I have @@servername is NUll? I don't know how it became NULL. How I can change it?
Thanks in advance
Hello All,
I am trying to export data from a database in MS-SQL server and import the same to a database in DB2 UDb v7.2 on AIX5. While trying to do this, I am getting some errors "table name is undefined" and "drivers are not capable."
I selected the IBM DB2 ODBC DRIVER for the destination server. Am I doing any mistake....
This is being posted in both DB2 and MS-SQL sites.
Thanking you all....
...Ram
How to export records from sql server 2005 database to a notepad or to excel..?
and how to import records from SQL server 2005 to SQL server 2000.
pls anyboy can help me pls
with regards
shaji
What are the ways to export/import data in/out of SQL Server 2005? Iused to use DTS for 2000 to do such thing and now I can't even findthe wizard in 2005!
View 2 Replies View Related
Hi All,
How to export the tables from SQL server and import those tables in the oracle9i.
Plz any one give me the steps for this...
Thanks in Advance
Hey,
I've recently installed sqlServer 2005 express on my laptop so i can take some work away during christams.
What I want to do is copy a db from my work machine that is running sql2000, but i have discovered that import/export is not available in the express managment studio and that I can't connect to 2005 from enterprise manager on my work machine.
How can I copy a db Managment Studio Express???
Any advice would be much appreciated.
Tim
I'm working on an ASP.Net project where I want to test code on a localmachine using a local database as a back-end, and then export it tothe production machine where it uses the hosting provider's SQL Serverdatabase on the back-end. Is there a way to export tables from oneSQL Server database to another in such a way that if a table alreadyexists in the destination database, it will be updated to reflect thechanges to the local table, without existing data in the destinationtable being lost? e.g. suppose I change some tables in my localdatabase by adding new fields. Can I "export" these changes to thedestination database so that the new fields will be added to thedestination tables (and filled in with default values), without losingdata in the destination tables?If I run the DTS Import/Export Wizard that comes with SQL Server andchoose "Copy table(s) and view(s) from the source database" and choosethe tables I want to copy, there is apparently no option *not* to copythe data, and since I don't want to copy the data, that choice doesn'twork. If instead of "Copy table(s) and view(s) from the sourcedatabase", I choose "Copy objects and data between SQL Serverdatabases", then on the following options I can uncheck the "CopyData" box to prevent data being copied. But for the "CreateDestination Objects" choices, I have to uncheck "Drop destinationobjects first" since I don't want to lose the existing data. But whenI uncheck that and try to do the copy, I get collisions between theproperties of the local table and the existing destination table,e.g.:"Table 'wbuser' already has a primary key defined on it."Is there no way to do what I want using the DTS Import/Export Wizard?Can it be done some other way?-Bennett
View 3 Replies View RelatedHi
I am using CSV (comma delimeted file) for exporting data from sql server table to CSV and then import to sql server from the CSV.
Now I have a problem, I could sucessfully export the data to CSV, but one of the field which has whole html for each product is giving me problem, It wouldnt save in one cell as for other data items in a record are. If I remove that field, the rest of records are exported okay, but with this one, it do export, but the data wouldnt go to one cell of the excel file and hence wouldnt work in importing to sql. I guess some tags in the string is creating problem plus also what should I do if the string already have comma as data, and we use comma as delimiting character.
Any kind of help greatly appreciated
EDIT:
Below is a sample of html thats already saved in one field but wouldnt come to one excel cell when exported to CSV...
<P><TABLE class=content cellSpacing=0 cellPadding=2 width="100%" border=0><TBODY><TR vAlign=top><TD><STRONG>Product</STRONG></TD><TD>XXXX</TD></TR><TR vAlign=top><TD width="46%"><STRONG>XXXX</STRONG></TD><TD width="54%">XXXX </TD></TR><TR vAlign=top><TD><STRONG>XXXX</STRONG></TD><TD>XXXX</TD></TR><TR vAlign=top><TD><STRONG>XXXX</STRONG></TD><TD>up to 4MB/s</TD></TR><TR vAlign=top><TD><STRONG>XXXX</STRONG></TD><TD>XXXXX<TR vAlign=top><TD><STRONG>XXXX</STRONG></TD><TD>XXXX</TD></TR></TBODY></TABLE><TABLE class=content cellSpacing=0 cellPadding=2 width="100%" border=0><TBODY><TR vAlign=top><TD><STRONG>XXXXX</STRONG></TD><TD>XXXXX</TD></TR><TR vAlign=top><TD><STRONG>XXXX</STRONG></TD><TD>XXXX</TD></TR><TR vAlign=top><TD><STRONG>XXXX</STRONG></TD><TD>XXXXX</TD></TR></TBODY></TABLE><A href="http://www.xxx.xxx" target=_blank><BR><BR>xXXX</A><BR><BR>Ă‚ </P>
Regards
Mykhan
Hi frnz ,
i want to know how to import a CSV File and export CSV File From database SQLSERVER-2005 Using ASP.NET With C#
IF any one knows Help me
Vinnu
Hi every body
I have 2 databases called Tax and News
There is a table in database Tax called table table1(id, Title,Content)
There is a table in database News called table table2(id, Headline,Body)
How can I copy(append) data from table1 to table2 with mapping Title -> Headline and Content -> Body
Any answers would be appreciated.
I've a question regarding the usage of Import/Export wizard of a database located on one remote server (Say A) to another (Say B).
It works fine but the problem is that Stored Procedures are not transferred between server A and B. Is there any solution for this problem?
Hi Everyone..
I want to import and export sql tables to dbase IV or any other format..But i want to run DTS Wizard from inside VB6.. IS it possible .. or if you guys know some other method to import and export tables in which i can provide the choice to transfer into any other format..please let guide me i'll be obliged..
Tahir