Hello E'body
I have an application with MSAccess as front end and SQLServer as backend. have quite a bit of tables. i wanted to write a stored procedure which exports a SQL Server table (both Structure & Data) to a new Access MDB file. i know with the use of DTS its possible but i need to code it down. i need to perform this at runtime. so can anybody help.
Its urgent.
Bye.
Lax
Hello. I want to ask about the possibility of copying both a tablestructure and it's contents from aSQL server table to a table within MS access. The problem cannot besolve with a permanent table structure at the target location.The names of the columns are essentially data with the application andso are subject to change. I am targeting a solution using SQL QueryManager.The approach I have tried (with failure) isSELECT *INTO <linkedserver table>FROM <local table>This should create and copy. However, I am not sure if this isachievable with this approach.Refer to the dialogue;-------------------------------------------------------USE MASTERGOEXEC sp_addlinkedserver@SERVER = 'Freddie',@PROVIDER = 'Microsoft.Jet.OLEDB.4.0',@SRVPRODUCT = 'OLE DB Provider for Jet',@DATASRC = 'C: empHMIS_Recipe.mdb'-- I am not sure if this is requiredEXEC sp_addlinkedsrvlogin 'Freddie', false, 'sa', 'Admin', NULLSELECT * FROM Freddie...FRED -- This is OKSELECT * INTO #Temp FROM Freddie...FRED -- This is OK-- This fails - Refer errorSELECT * INTO Freddie.FRED65from #tempServer: Msg 2760, Level 16, State 1, Line 1Specified owner name 'Freddie' either does not exist or you do not havepermission to use it.-- This also fails and I thought reflected the above select with naming- Refer errorSELECT * INTO Freddie...FRED65from #tempServer: Msg 117, Level 15, State 1, Line 2The object name 'Freddie...' contains more than the maximum number ofprefixes. The maximum is 2.EXEC sp_dropserver 'Freddie',@droplogins = 'droplogins'------------------------------------------------------------Thank you.Regards JC...
View 3 Replies View RelatedHello E'body,
I have to export a SQL Server Table (Structure+Data) to an access mdb file at run time. How can i do it? please help.
Lax.
I have an access application that gets used by people on the road.
They put data into a local table and occasionally log into our network and transfer a file to a temp table in SQL.
How is the best way to approach this?
Hi,
Want to export the data from SQL2K5 into MS Access 2003.
Anyone, can guide me how to proceed with this.
Regards,
Hi All
what is the best way (and how please) to export one table from sql 2005 table to access table with aspx 2.0 NET
thanks
daniel cohen
Hi,
is there a way of exporting a database structure and not the data in it?
Thanks.
I am looking a way to export SQL Server 2005 DB tables to Access file dynamically. Like if i have added or removed any tables from SQL DB then when i run SSIS package it should export that table with data to Access file. is there any easy way to do this. if it is not them please someone please tell me which controls should i look at and which technique i should use to do this.
View 4 Replies View RelatedBelow is my table structure. And I am inserting data from other temp table.
CREATE TABLE #revf (
[Cusip] [VARCHAR](50) NULL, [sponfID] [VARCHAR](max) NULL, GroupSeries [VARCHAR](max) NULL, [tran] [VARCHAR](max) NULL, [AddDate] [VARCHAR](max) NULL, [SetDate] [VARCHAR](max) NULL, [PoolNumber] [VARCHAR](max) NULL, [Aggregate] [VARCHAR](max) NULL, [Price] [VARCHAR](max) NULL, [NetAmount] [VARCHAR](max) NULL,
[Code] ....
Now in a next step I am deleting the records from #revf table. Please see the delete code below
DELETE
FROM #revf
WHERE fi_gnmaid IN (
SELECT DISTINCT r2.fi_gnmaid
FROM #revf r1, #revf r2
[Code] ...
I don't want to create this #rev table so that i can avoid the delete statement. But data should not affect. Can i rewrite the above as below:
SELECT [Cusip], [sponfID], GroupSeries, [tran], [AddDate], [SetDate], [PoolNumber], [Aggregate], [Price], [NetAmount], [Interest],
[Coupon], [TradeDate], [ReversalDate], [Description], [ImportDate], MAX([fi_gnmaid]) AS Fi_GNMAID, accounttype, [IgnoreFlag], [IgnoreReason], IncludeReversals, DatasetID, [DeloitteTaxComments], [ReconciliationID],
[Code] ....
If my above statement is wrong . Where i can improve here? And actually i am getting 4 rows difference.
I have a stored proc that runs and produces an Excel 2007 file. I can run it fine within SQL Server Management Studio.
Basically, this is a partial code in the stored proc:
-- export sql server table data to excel 2007
insert into OPENROWSET('microsoft.ace.oledb.12.0',
'Excel 12.0;Database=D: emp est2007.xlsx;',
'SELECT * FROM LicensesrRegion') select * from Licenses
BUT when I have an execute SQL task to run that stored proc in an SSIS package, I received the following error:
Ad hoc access to OLE DB provider 'microsoft.ace.oledb.12.0' has been denied. You must access this provider through a linked server.
Please advise.
PS: I have to run that stored proc in an SSIS package because the SSIS package does some prereq stuff ( create folder, copy template to new Excel output file) then finally calls the aforementioned stored proc.
Thank you in advance.
Thanks!
Hi,
I am getting the error message as "DIAG [00000] [ODBC Access Driver 52.1.150.0] -26 Driver not capable (-26)" at the time of retrieving the catalog infromation by SqlTables methode. it is shown "?" as catalogname but this not supported by odbc access driver. can you please help out how can i resolve using C++ code in SqlTables methode.
Error message:
dtswiz 1390-e20 EXIT SQLTablesW with return code -1 (SQL_ERROR)
HSTMT 003C3108
WCHAR * 0x00D27EB8 [ -3] "? 0"
SWORD -3
WCHAR * 0x00000000 [ -3] <empty string>
SWORD -3
WCHAR * 0x00000000 [ -3] <empty string>
SWORD -3
WCHAR * 0x00164804 [ -3] "TABLE 0"
SWORD -3
DIAG [00000] [ODBC Access Driver 52.1.150.0] -26 Driver not capable (-26)
Best Regards,
Murthy
We have SQL Enterprise Manager (8.0). Is there any way to Copy a Table from one database to another with only the Structure (design) - not all the Data?
I can't find any option in the Import Data Wizard that only copies the Table structure.
Any help is appreciated. Thanks
I have a table that looks like this:
ID Type
123 Phone
123 Meeting
123 Phone
and I would like the data to look like this
ID phone Meeting
123 2 1
How do I do this?
In order to export data to a 3rd party provider, I build five separate tables to store the data. Every table has a different layout, except for the first four columns. They are record type, SSN, employee id and another id number.
Basically, I have to sort that data by SSN then by record type. Each employee will have multiple records.
However, that data will need to be "merged" into one table to be exported.
I have created a table that defines the first four columns, but then has one large "filler" field that will contain the rest of the data. How can I copy data from five different tables with five different layouts into one table?
Any suggestions?
Thanks,
Steve Hanzelman
I have a large fact table spread across tens of partitions (appx. 1TB each). I found that the business does not need much of the columns in the table. So, as an optimization action, I decided to get rid of these un-needed columns.What is the efficient way to achieve this? Can I simply drop these columns from the table, or use a new table with the reduced structure?
View 2 Replies View RelatedI have a sql server 2008 backend with an Access 2007 frontend database. Each time I export a query I get the following error:
Code:
Microsoft Access was unable to append all the data to the table.
The contents of fields in 0 record(s) were deleted, and 1 record(s) were lost due to key violations.
*If data was deleted, the data you pasted or imported doesn't match the field data types or the FieldSize property in the destination table.
*If records were lost, either the records you pasted contain primary key values that already exist in the destination table, or they violate referential integrity rules for a relationship defined between tables. Do you want to proceed anyway?
I don't know what if anything is actually missing because of the amount of data is more thant 6000 records. It seems everything exported but I would have to comb through the data to be sure.
Hi all
I have a Table with Following structure ( a Tree Structure )
PK Parent Level Code
--- -------- ------- ------
1 0 0 100
2 1 1 101
3 1 1 102
4 2 2 103
5 3 2 104
6 4 3 105
The same as following Tree as you can see
1__
| 2__
| 4__
| 6
| __
3__
5
I need a query to return the following Result. I think it is possible only through Nested sub-Queries But i don't know how to do that
Could any one help me.?
PK Parent Level Value First-Parent' Code 2nd-Parent's Code 3rd-Parent's Code
---- -------- ------ ------- --------------------- ---------------------- -----------------------
1 0 0 100 NULL NULL NULL
2 1 1 101 100 NULL NULL
3 1 1 102 100 NULL NULL
4 2 2 103 101 100 NULL
5 3 2 104 102 100 NULL
6 4 3 105 103 101 100
Any help greatly would be appreciated.
Kind Regards.
Hi
I am trying to export an table data to csv format. The problem here is the table columns are dynamic. The DTS exports only the columns available during the DTS design time and it ignores if any new columns are added after the design. I need solution for this asap.
Thanks
SqlJerin
Hi All,
I am woriking with a package wherein i need to export data from SS TABLE to excel sheet, however the no of cells exceed the 65536 which is the limit in excel, i tried using the pivot option in data flow transformation, however i am unable to do this, how do i go about doing this. Can someone tell me the correct procedure plzzzzz.
Regards,
Pratik
I have two identical table structure with at least 60 or more columns!!
Table A
ID numeric(18, 0) Primary Key,
RefID numeric(18, 0),
CoNum Varchar(15),
PrevCode Varchar(15),
DispCode VArchar(15),
EffDate Date,
Sal numeric(18, 0),
SDeposit numeric(18, 0) Etc....
I need to compare Data between two table and provide result like this!
RefId ID, CoNum, PrevCode, DispCode, EffDate, Sal, SDeposit
1, ,No Match, ,20,5200,0
So condition like. If table A Column Data does not Equal Table B Column data then
If datatype is Date then display Difference of Days.
if Datatype is Numeric then display Difference between value.( it display 0 if doesn't have difference)
if Datatype is Varchar then display No Match word.
Hello, can anyone tell me if it is possible to conditionally join tables? If so, how could it be done?
What I would like to do is create a query similar to the one below but include the rows in the Asset table where the corresponding Alert field is NULL.
SELECT A.AssetId, A.IndustryId, A.RegionId, A.RevenueId, AL.AlertId
FROM Alerts AS AL INNER JOIN
Assets AS A ON AL.IndustryId = A.IndustryId AND AL.RegionId = A.RegionId AND AL.RevenueId = A.RevenueId
WHERE AlertId = 1
The output I am after would be the first row in the Assets table. But since the RevenueId column is NULL, I get nothing. The only time the above query will work is if all three Id columns are populated. That is not always going to be the case. Please don't suggest changing table structures or adding data. That is not an option.
Below are the table structures and sample data.
CREATE TABLE [dbo].[Alerts](
[AlertId] [int] NOT NULL,
[IndustryId] [int] NULL,
[RegionId] [int] NULL,
[RevenueId] [int] NULL,
CONSTRAINT [PK_Alert] PRIMARY KEY CLUSTERED
(
[AlertId] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
CREATE TABLE [dbo].[Assets](
[AssetId] [int] NOT NULL,
[IndustryId] [int] NOT NULL,
[RegionId] [int] NOT NULL,
[RevenueId] [int] NOT NULL,
CONSTRAINT [PK_Assets] PRIMARY KEY CLUSTERED
(
[AssetId] ASC,
[IndustryId] ASC,
[RegionId] ASC,
[RevenueId] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
INSERT INTO Alerts (AlertId, IndustryId, RegionId, RevenueId)
VALUES (1, 2, 5, NULL)
INSERT INTO Alerts (AlertId, IndustryId, RegionId, RevenueId)
VALUES (2, 2, 5, 1)
INSERT INTO Alerts (AlertId, IndustryId, RegionId, RevenueId)
VALUES (3, 2, NULL, NULL)
INSERT INTO Alerts (AlertId, IndustryId, RegionId, RevenueId)
VALUES (4, NULL, 5, NULL)
INSERT INTO Alerts (AlertId, IndustryId, RegionId, RevenueId)
VALUES (5, 3, NULL, 4)
INSERT INTO Alerts (AlertId, IndustryId, RegionId, RevenueId)
VALUES (6, NULL, 4, NULL)
INSERT INTO Alerts (AlertId, IndustryId, RegionId, RevenueId)
VALUES (7, 3, 4, 1)
INSERT INTO Assets (AssetId, IndustryId, RegionId, RevenueId)
VALUES (1, 2, 4, 3)
INSERT INTO Assets (AssetId, IndustryId, RegionId, RevenueId)
VALUES (1, 2, 5, 1)
INSERT INTO Assets (AssetId, IndustryId, RegionId, RevenueId)
VALUES (2, 2, 5, 5)
INSERT INTO Assets (AssetId, IndustryId, RegionId, RevenueId)
VALUES (2, 3, 4, 5)
INSERT INTO Assets (AssetId, IndustryId, RegionId, RevenueId)
VALUES (3, 2, 4, 1)
INSERT INTO Assets (AssetId, IndustryId, RegionId, RevenueId)
VALUES (4, 2, 5, 4)
INSERT INTO Assets (AssetId, IndustryId, RegionId, RevenueId)
VALUES (5, 3, 5, 1)
INSERT INTO Assets (AssetId, IndustryId, RegionId, RevenueId)
VALUES (5, 2, 4, 5)
INSERT INTO Assets (AssetId, IndustryId, RegionId, RevenueId)
VALUES (5, 3, 1, 1)
INSERT INTO Assets (AssetId, IndustryId, RegionId, RevenueId)
VALUES (6, 3, 2, 4)
Thanks.
i have to export the data from excel sheet to database table. for that i created linked server in sql 2000. after creating i get the SQLOLEDB error when i expand the linked server in enterprise manager.Can anyone help me in solving this issue.
View 5 Replies View RelatedHello,
I would like to create a stored procedure that opens a data connection for an excel file that I have saved. I would then like to export the excel data into an existing SQL table. Can anyone tell me the best way to go about this?
Thanks
Hi there!
This is a part of the XML file that I have:
<?xml version="1.0" encoding="Windows-1252" standalone="yes" ?>
- <NewDataSet>
- <xschema id="NewDataSet" xmlns="" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urnchemas-microsoft-com:xml-msdata">
- <xs:element name="NewDataSet" msdata:IsDataSet="true">
- <xs:complexType>
- <xs:choice maxOccurs="unbounded">
- <xs:element name="HdrStateProv">
- <xs:complexType>
- <xsequence>
<xs:element name="stateProvID" type="xs:int" minOccurs="0" />
<xs:element name="stateProvNme" type="xstring" minOccurs="0" />
<xs:element name="CountryID" type="xs:int" minOccurs="0" />
</xsequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xschema>
- <HdrStateProv>
<stateProvID>34</stateProvID>
<stateProvNme>Alabama</stateProvNme>
<CountryID>225</CountryID>
</HdrStateProv>
As you can see it just has all the 50 states and I have a datatable called HdrStateProv with three fields, stateProvID, stateProvNme, CountryID in my SQL Server Express. How would I import(map) this data there? I tried the sqlbulkimport KB article but does that not seem to work. Thanks for your time!
Hi,
I have to export the table data from my databse into text files as I nedd to put it in Informix database using a sheel script. Is there a way by which I can do this.
Is there any other way by which I can put the data from SQL Server to Informix.
Any takers,
Thanking you in advance.
Bye for now,
Himauhu
How to export data from MDS 2012 entity to SQL 2012 user database table ?
View 6 Replies View RelatedHi,
Question pls. I have an MS SQL local package where it exports data from SQL table to Excel file. My question is, how can erase all the records in my excel file before i export the new data from SQL table?
What i want is to delete the rows in the destination file before inserting new records.
Thanks a lot.
I am using Bulk Copy command for Exporting data table wise from database to csv files and it was working fine. Since last 3-4 days when exporting for some tables data in csv file is coming junk.
View 1 Replies View RelatedI have several dbs I export to Access each month and have not had this problem before. When I try exporting now, I get the message "cannot convert between unicode and non-unicode string data types". I know I can change the data type from varchar to nvarchar to correct this but there are dozens and dozens of tables in these dbs and changing all of them is not an option. Any suggestions first to how to accomplish the export and second why this is suddenly happening. I run SQL Server 2005 Standard and keep my updates current on my OS's and applications.
Thanks,
Dave
Has anyone else exported data to Access? If so, is it a slow process in SQL Server 2005?
I am exporting 3,000 records to an Access database using a view and it has taken 20 minutes. I am using the Export Data wizard. Any tips on how to speed it up would be appreciated.
hi all,
is there any query to move certain data from a sql data to access table through query. i am having a requirement where i have to fetch the records from a sql table that falls within a specified range to a ms access table. is this possible through a query.
thanks
I have two database(MYDB1 , MYDB2) on two different server's(SERVER1 , SERVER2) . I want to create an store procedure in MYDB1 on SERVER1 and get some data from a table of MYDB2 on SERVER2. How can i do this?
View 5 Replies View Relatedhow I can load the CSV file data into the sql server table. I know there are ways like bulk insert and other to load the csv file data into the table. But in my case the table doesn't exist and has to be created at the run time. With simple insert in temp table we do like select * into #temp from tablename and that creates the temp table. So. I need something like that which create the temp table and load the data into it. because the CSV file would have different number of columns and names so I can not create the table structure in advance. I have to create the table at run time.
View 3 Replies View Related