Exporting Data Into MS Access.
Mar 25, 2008
Hi,
Want to export the data from SQL2K5 into MS Access 2003.
Anyone, can guide me how to proceed with this.
Regards,
ADVERTISEMENT
Exporting Structure && Data To Access Table
Mar 11, 2004Hello E'body
I have an application with MSAccess as front end and SQLServer as backend. have quite a bit of tables. i wanted to write a stored procedure which exports a SQL Server table (both Structure & Data) to a new Access MDB file. i know with the use of DTS its possible but i need to code it down. i need to perform this at runtime. so can anybody help.
Its urgent.
Bye.
Lax
Dynamically Exporting Data To Access File
Jun 19, 2007I am looking a way to export SQL Server 2005 DB tables to Access file dynamically. Like if i have added or removed any tables from SQL DB then when i run SSIS package it should export that table with data to Access file. is there any easy way to do this. if it is not them please someone please tell me which controls should i look at and which technique i should use to do this.
View 4 Replies View Related'microsoft.ace.oledb.12.0' Access Denied When Exporting Data To Excel 2007
May 10, 2008I have a stored proc that runs and produces an Excel 2007 file. I can run it fine within SQL Server Management Studio.
Basically, this is a partial code in the stored proc:
-- export sql server table data to excel 2007
insert into OPENROWSET('microsoft.ace.oledb.12.0',
'Excel 12.0;Database=D: emp est2007.xlsx;',
'SELECT * FROM LicensesrRegion') select * from Licenses
BUT when I have an execute SQL task to run that stored proc in an SSIS package, I received the following error:
Ad hoc access to OLE DB provider 'microsoft.ace.oledb.12.0' has been denied. You must access this provider through a linked server.
Please advise.
PS: I have to run that stored proc in an SSIS package because the SSIS package does some prereq stuff ( create folder, copy template to new Excel output file) then finally calls the aforementioned stored proc.
Thank you in advance.
Thanks!
Driver Not Capable (-26) When Exporting The Data From Odbc Access Using Sql Server Managare 2000
May 9, 2008
Hi,
I am getting the error message as "DIAG [00000] [ODBC Access Driver 52.1.150.0] -26 Driver not capable (-26)" at the time of retrieving the catalog infromation by SqlTables methode. it is shown "?" as catalogname but this not supported by odbc access driver. can you please help out how can i resolve using C++ code in SqlTables methode.
Error message:
dtswiz 1390-e20 EXIT SQLTablesW with return code -1 (SQL_ERROR)
HSTMT 003C3108
WCHAR * 0x00D27EB8 [ -3] "? 0"
SWORD -3
WCHAR * 0x00000000 [ -3] <empty string>
SWORD -3
WCHAR * 0x00000000 [ -3] <empty string>
SWORD -3
WCHAR * 0x00164804 [ -3] "TABLE 0"
SWORD -3
DIAG [00000] [ODBC Access Driver 52.1.150.0] -26 Driver not capable (-26)
Best Regards,
Murthy
Exporting To Access
Sep 3, 2007I have several dbs I export to Access each month and have not had this problem before. When I try exporting now, I get the message "cannot convert between unicode and non-unicode string data types". I know I can change the data type from varchar to nvarchar to correct this but there are dozens and dozens of tables in these dbs and changing all of them is not an option. Any suggestions first to how to accomplish the export and second why this is suddenly happening. I run SQL Server 2005 Standard and keep my updates current on my OS's and applications.
Thanks,
Dave
Exporting Access Table To SQL 7.0
Mar 6, 2001I have an access application that gets used by people on the road.
They put data into a local table and occasionally log into our network and transfer a file to a temp table in SQL.
How is the best way to approach this?
Exporting To Access Very Slow
Feb 22, 2008Has anyone else exported data to Access? If so, is it a slow process in SQL Server 2005?
I am exporting 3,000 records to an Access database using a view and it has taken 20 minutes. I am using the Export Data wizard. Any tips on how to speed it up would be appreciated.
Exporting Primary Keys Into Access
Nov 7, 2004Hi There
I have an SQL database which I need to export into Access, I know how to this however the Primary Key's does not transfer over and more importantly once exported I cannot set the primary key to auto number as their is already information in the table.
I know I can just set up the table, with a primary key set to an autonumber and import the other fields but as the primary key's are foreign keys in other tables I need the rows in the access table to have the same ID number as in the SQL database.
Hope the above makes sense to someone and any help would be greatly appreciated.
Exporting To MS Access From Query Analyser
Jan 13, 2004Hi folks
I´ve a simple doubt (I hope) ... is it possible export the results from a simple query to a ms access file using just the query analyser??? I´m using SQL Server 2000 and MS Access XP
thanks for your help!!!
Exporting To Excel Problems (URL Access)
Jul 26, 2006Hello,
I'm using SQL Server 2005 Reporting Services. I'm having an issues when exporting to Excel. I'm using URL Access to generate the report and display it in a browser window. I then choose Excel and click the Export link. Doing this opens a temporary browser window and then a dialog that asks if I want to save the report or open it. If I choose to open it, the report opens in Excel without problem. The problem is that the temporary browser window doesn't go away (close) automatically like it should. What makes this a little more strange is that this behavior only seem to occur on a Windows XP computer. If I run the report from a Windows 2000 or Windows Server 2003 computer, the temporary browser windows closes automatically (and the report is exported to Excel and opened).
Has anyone experienced this same issue?
Does anyone know how to "fix" this issue so that exporting to open right away always closes the temporary browser window?
Thanks.
Exporting Sql 2000 To Ms Access 2003
Sep 3, 2006i am trying to exporting sql 2000 to ms access 2003 with relationship also exported to access as well as the data.
help plz
Exporting Sql 2005 Table To Access
Jul 20, 2006Hi All
what is the best way (and how please) to export one table from sql 2005 table to access table with aspx 2.0 NET
thanks
daniel cohen
Export Wizard Disturb The Order Of Data While Exporting Data To Acess 2003 From SQL Server 2005
Feb 24, 2007
I am using the following query to export data from sql server to ms access in export data wizard:
SELECT * FROM myView where myID = 123
Order by varcharColumnName1,varcharColumnName2 ,intColumnName3
This query will fetch about 7, 00,000 records.
SQL server 2005 shows the correct order, but Data in access table shows Incorrect data.
Please give me the solutions.
Exporting Data - Unable To Append All Data To The Table
Jun 28, 2012I have a sql server 2008 backend with an Access 2007 frontend database. Each time I export a query I get the following error:
Code:
Microsoft Access was unable to append all the data to the table.
The contents of fields in 0 record(s) were deleted, and 1 record(s) were lost due to key violations.
*If data was deleted, the data you pasted or imported doesn't match the field data types or the FieldSize property in the destination table.
*If records were lost, either the records you pasted contain primary key values that already exist in the destination table, or they violate referential integrity rules for a relationship defined between tables. Do you want to proceed anyway?
I don't know what if anything is actually missing because of the amount of data is more thant 6000 records. It seems everything exported but I would have to comb through the data to be sure.
Exporting Data From A Merge Join From One Data Flow To Another
Mar 1, 2006Hi,
Does anyone know if it is possible to point data that underwent the "merge join" transformation (in one data flow) to the following data flow? I don't want to recreate all that merging, sorting and calling the same sources again in the following data flow if the data that I am using exists in the previous data flow. The merged data is simply too big to export to an excel file, so does anyone have any ideas? Thanks!
Data Access :: MS Access ADODB Connection To Stored Procedure - Cannot Retrieve Data
Sep 22, 2015I'm trying to re-write my database to de-couple the interface (MS Access) from the SQL Backend. Â As a result, I'm going to write a number of Stored Procedures to replace the MS Access code. Â My first attempt worked on a small sample, however, trying to move this on to a real table hasn't worked (I've amended the SP and code to try and get it to work on 2 fields, rather than the full 20 plus).It works in SQL Management console (supply a Client ID, it returns all the client details), but does not return anything (recordset closed) when trying to access via VBA code.The Stored procedure is:-
USE [VMSProd]
GO
/****** Object: StoredProcedure [Clients].[vms_Get_Specified_Client] Script Date: 22/09/2015 16:29:59 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[code]....
EXPORTING DATA
Mar 21, 2001hi all,
I am getting problem while importing data from excel file.
I am bale to do the same with flat files. But when i do with excel files
its throwing error : format error.
pls help me in this regard.
and How to export data into export files from query analyser..
Exporting Data
Feb 1, 2005Hello everybody,
I was wondering if there is a way to export and recode data at the same time with SQL.
For example I have gender information coded as 1 or 2 in my table and I need to upload the information to a different application that needs M or F. Is there a way to export to a new table and recode at the same time ?
I'm still pretty new to it.
Thank you.
-Seb
Exporting Data
Apr 20, 2004I would like to export data to a excel file using a stored procedure. I'm not sure how to go about this or if it is even possible. Can someone point me to a link to show me how to do this?
View 1 Replies View RelatedExporting Data
Jan 17, 2007Hi all,
I recently found out that there is no easy way to distribute a MSSQL 2005 database to MSSQL Server 2000. Most forums that I have read say to use the DTS facility to import the data into the SQL 2000, however this is not an option (for a variety of reason I won't go into).
The next best option in my mind is to script the entire database, including the data into one or a few script files then run them on the SQL 2000 server to recreate the database. Unfortunately, exporting the data, what I thought would be a fundamental feature, isn't part of SQL 2005.
So does anybody know of a good (free) scripting program that will allow me to export the entire database from a server? I've tried:
- Free program from the CodeProject.com (program dies when there's more than 5000 lines) http://www.codeproject.com/dotnet/ScriptDatabase.asp
-SQL Scripter www.sqlscripter.com (Doesn't script table which don't have primary keys, and produces a script for each object instead of just a single file)
I'd probably like a program which only creates a single script, as the database has over 200 tables and I don't want to have to go through this process everytime I need to distribute the DB (which will be often).
The only other option I can think of is a program which converts an SQL 2005 backup to a 2000 version.
Thanks for your help!
Exporting Data
Jul 5, 2007Guys,
I'm trying to export data from SQL. Can anyone help. I have commented my script below and have managed to create a table, insert using 'bulk insert' - now I want to export the data out. I'm getting an error message saying 'cannot use the output option when passing to a stored procedure'.
comment
-----------
drop table for re-runs !
-----------
drop table JET
go
comment
------------
create a table to match the .txt file importing
----------
create table JET
( [USER] char( 25),
[DESC] char (20),
SYSDATE datetime,
SYSVALUE MONEY ,
POSTDATE datetime,
POSTVALUE MONEY,
GLCODE CHAR (20)
)
comment
---------------
import using pipe delimited .txt file
--------------
bulk insert JET from 'D:Documents and SettingsmpeetSQL Test.txt'
with
(
fieldterminator = '|',
firstrow = 2
)
comment
-------
check results
-------
select *
from JET
NEW BATCH
bcp JET out 'D:Documents and SettingsmpeetSQL Testexport.txt'
I want extract the data to a .txt file would anyone know the syntax?
Cheers
Michael
Exporting Data
Sep 12, 2007I am using sql server 2005
I want export data from Excel to new SQL Server table,
select *
into mytable FROM OPENROWSET('Microsoft.Jet.OLEDB.4.0',
'Excel 8.0;Database=c:sample1.xls;HDR=YES',
'SELECT * FROM [Sheet1$]')
But i am getting following error message
OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)" returned message "The Microsoft Jet database engine could not find the object 'Sheet1$'. Make sure the object exists and that you spell its name and the path name correctly.".
Msg 7350, Level 16, State 2, Line 1
Cannot get the column information from OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)".
Exporting Data From SQL
Jan 17, 2008I'm very new to SQL - please bear with me.
1. I need to be able to export data from a database to an excel sheet (I have written the query and tested it works, so I don't need to know this stage :^)). What is the best way of doing this? Could you send me a link of a howto doc?
2. Once the data is export to excel, it then needs to be manipulated so that a final sheet is created. During the manipulation I need to add the values of certain columns to give me an end result.
Should I use excel to manipulate the data or can sql add the values of certain columns and then export to an excel sheet?
What's the best way please.
Many thanks
Exporting Complex Data To CSV
May 12, 2007I want to export data to CSV that is nested.
eg.Poll 1,val1,val2
Question1,Q1val1,Q1val2
AnswerQ1A1,Q1A1val1,Q1A1val2, TallyQ1A1
AnswerQ1A2,Q1A2val1,Q1A2val2, TallyQ1A2
Question2,Q2val1,Q2val2
AnswerQ2A1,Q2A1val1,Q2A1val2, TallyQ2A1
AnswerQ2A2,Q2A2val1,Q2A2val2, TallyQ2A2
AnswerQ2A3,Q2A3val1,Q2A3val2, TallyQ2A3
Best practices-wise, what should my data end up like?
Since it's nested surely it can't be simply a list of identically-formatted rows, one for each answer:
Poll1,val1,val2,Question1,Q1val1,Q1val2, AnswerQ1A1,Q1A1val1,Q1A1val2, TallyQ1A1,Poll1,val1,val2,Question1,Q1val1,Q1val2, AnswerQ1A2,Q1A2val1,Q1A2val2, TallyQ1A2,Poll1,val1,val2,Question2,Q2val1,Q2val2, AnswerQ2A1,Q2A1val1,Q2A1val2, TallyQ2A1,Poll1,val1,val2,Question2,Q2val1,Q2val2, AnswerQ2A2,Q2A2val1,Q2A2val2, TallyQ2A2
Do I end up with three separate tables?
Poll1,val1,val2
Question1,Q1val1,Q1val2, Question2,Q2val1,Q2val2
AnswerQ1A1,Q1A1val1,Q1A1val2, TallyQ1A1,AnswerQ1A2,Q1A2val1,Q1A2val2, TallyQ1A2,AnswerQ2A1,Q2A1val1,Q2A1val2, TallyQ2A1,AnswerQ2A2,Q2A2val1,Q2A2val2, TallyQ2A2
If that's so, do I simply concatenate them in the final file? Or do I have three separate files? And do I label them uniquely such as Poll1Main, Poll1Questions and Poll1Answers so that I can export several polls side-by-side without overwriting each other?
Exporting Data Into .CSV Format
Jan 17, 2008Hi
I am trying to export data from SQL which is ok and I can do that part. However from the result of the query I need to add the values of certain columns. Because I'm a newbie to SQL I'll explain and try and show images as best as I can as we go....
So far I have written a query
select Stockitem.code, Warehouseitem.ConfirmedQtyInStock, Warehouseitem.UnConfirmedQtyInStock, Warehouseitem.QuantityAllocatedStock, Warehouseitem.QuantityAllocatedBOM, Warehouseitem.QuantityAllocatedSOP, WarehouseItem.WarehouseIDfrom WarehouseItem INNER JOIN StockItem ONWarehouseItem.ItemID = Stockitem.itemidINNER JOIN BinItem ONBinitem.itemid = stockitem.itemidwhere WarehouseItem.WarehouseID = '3403' AND BinItem.BinName LIKE 'S%' AND BinItem.BinName <> 'S' OR BinItem.BinName LIKE 'T%' AND BinItem.BinName <> 'T'order by stockitem.code
This returns the following results....
Code ConfirmedQtyInStock UnConfirmedQtyInStock QuantityAllocatedStock QuantityAllocatedBOM QuantityAllocatedSOP WarehouseID
12345 96.00000 .00000 .00000 3.00000 13.00000 3403
Now I am trying to find out the amount of freestock available for everything with the WarehouseID 3403. Therefore in the example above to be able to workout how many '12345' (Code) we have in stock, the equation used to find out the free stock available is as follows....
Free Stock = (ConfirmedQtyInStock + UnConfirmedQtyInStock) – (QuantityAllocatedStock+ QuantityAllocatedBOM + QuantityAllocatedSOP)
Therefore if I manually use the equation above the amount of freestock available =
Free Stock = (96+0) - (0+3+13) = 80 (free stock).
Then once I have the equation to be able to output the 'freestock' quantity, I need to export the results into an excel spreadsheet with the following layout...
ColumnA
Code,FreeStock
12345,80
Hope I've explained this in a good manner, any help would be gratefully received.
Simba
Exporting Data, Urgent!!
Jul 24, 2001Hi All,
I need to export data from one database to another and I want to automate this process. The problem is I only have to select specific tables of data to be exported. Any help will be greatly appreciated
Thank you!!
Exporting Data From A Query To A Csv Or Xls Via T-sql
Jan 12, 2001Is there any way in SQL 7/2000 to export a query result to a csv or xls via t-sql?
Thanks a lot for your help,
Yelena
Importing && Exporting Data
Dec 21, 2004may i know where to find more detail like how to importing and exporting data in ms sql server.?
Hope can get the more detail about it and also teach me step by step. (hope can include the photo).
Exporting Data/1st Three Lines NOT CSV..
Oct 3, 2005I have a specific format that I need to export data to. The first three lines of the document MUST be in the form of:
ascii
,
klg, Eastern Daylight Time,1,1
PineGrove,0,2005/10/01,00:00,1,1.75,192
PineGrove,0,2005/10/01,00:05,1,1.75,192
Pinegrove,0,2005/10/01,00:10,1,1.75,192
If I set this up in DTS and do an export, it puts commas after ascii - which I cannot have.
I've also tried using two data sources and exporting twice (hoping to append), however, one just overwrites the other.
Anyone have any ideas?? :o
Thanks in advance,
Krista
Exporting Data+Structure
Mar 4, 2004Hello E'body,
I have to export a SQL Server Table (Structure+Data) to an access mdb file at run time. How can i do it? please help.
Lax.
Exporting Data From MSDE
Nov 1, 2006Does anybody know what "free" tool I can use to export data from an MSDE database? I want to import it back to SQL Server
View 5 Replies View RelatedExporting Data To Excel
Jul 15, 2007Hi,
I am Sree Raj. New to SQL Server.
I am trying to export data to excel and it is giving an error.
Here is the query and error:
INSERT INTO OPENROWSET('Microsoft.Jet.OLEDB.4.0', 'Excel 8.0;Database=C:SQL ServerEmp_Personal_Data.xls;', 'SELECT * FROM [Sheet1$]')
SELECT * FROM Emp_Info
error is:
Cannot get the column information from OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)"
Can anybody please help me what is this error about & how to fix this.
Thanks in advance
Sree Raj