Is there a way to extend the number of rows that will be returned so that Reporting services doesn't display such a large number of pages for the users to page through? It would be easier for them to "wheel mouse" through a long page on the screen.
Anyone out there have any thoughts on how this might be accomplished?
Thanks!
Travis
I want to select data from a table with 5.000.000 rows. It's very slowly. Do you now, how I can select only a XY number of rows? I can't use TOP in select query. User see only 20-30 rows on his page, but he can use page_up, page_down. Is possible to something as lazy load?
View 2 Replies View RelatedIs it possible to get the number of Rows returned by a stored procedure in a profiler ?
if yes, what parameters shud I be looking for?
THanks
Harshal
I have a report that calls a stored procedure. I want to display the number of records that the stored procedure returned. I can't seem to find an expression that will do this. Is there an expression that will display the record count for a dataset?
Thanks,
Rob
hello,
i have a stored procedure SELECT CommentID, UserName, CommentingDate
FROM Comm
WHERE PictureID = @PictureID
ORDER BY CommentingDate DESC
witch shows me the users who commented a Picture with PictureID = x
I need to add two rows at that stored procedure, one to show the number of total comments at that picutre (like counting the number of rows returned) and the second to show count the DISTINCT users who commented that picture
I tryied with COUNT but i have to use GROUP BY and i don't think this is good...
I hope you understand... please help me,
thanks
Hi All,
i couldn't find how to set up the number of rows displaying on each page?
i wanna each page display 20 rows.
Thanks
Nick
hi,
i need SP that receive 2 integers ,@NUM_ROWS and @PAGE_NUMBER,
and return the rows in that page.
for example:
SP(4,2) will return 4 rows in page number 2 .
So if i have table with 9 rows i will get rows 5-8,
the first page is rows 1-4 the second page is 5-8 and the 3 page is row 9.
i have to assume that rows can be deleted form that table.
thanks
I am fairly new to reporting services and recently created a simple tabular report. There is one table which queries the database and I would like to change the table so there are more than 25 rows of data per page. How do I do this? Also it would be advantageous to know how to set the report to only create a new page for every different item in a column. E.g., if I have various data for each date, I would like to only create a new page when the date changes so that all data for a specific date is on one page etc etc.
View 13 Replies View RelatedHi,
I have requirement to display Total number of Rows in a Report in Page Header.
I have written the following code in Page header it shows RowCount for the Page only.
=Count(ReportItems!textboxInTableCell.Value)
Can anyone please help on this?
Regards
Raghav
Is there a way to control how many Detail Rows are displayed on one page in Table and Matrix controls?
View 1 Replies View RelatedHi,
Can anybody tell how to ristrict the number of rows per page in SSRS?
I have a table in my report.I know we have to use" =Int(RowNumber(Nothing)/25)" in group expression.But I already have 3 group expression in my table.Where to write??
Thanks.
i want to break 2 by 2 rows in reportceiling(rownumber(nothing)/2).i used this expression in row group. URL....but i want to use this expression in matrix and that matirx is with in list . so i am getting error . how to use rownumber in list.here i used list to break the page wise id
View 3 Replies View RelatedIs there any way to control this scenario, I know trick to put 10 on each row ,but I need to split them unevenly, 10 on first page and the rest on second page. is it possible ?
=Ceiling((RowNumber(Nothing)) / 10)
I have a conditional split in an SSIS package - one split is where if rows are returned according to a specific rule, then insert those rows into to a Recordset Destinationm which points to a variable of Object type.
How I can use this variable to email fellow users. For example, what I would like is if ANY rows are returned to the Object variable (1 or more), then I would like to execute an email SP that we have on our server.
Hi,I have a shopping cart and before each product is added to the cart it checks to see if the stock control is turned on if so then checks the quantity available.My problem is that when i run the query select [dbStatus] from InventoryControl where [ID]=1 to view the status it is returning the incorrect bit value for dbStatus.If "dbStatus" is 0 in the database it returns 0 which is correct, but if the "dbStatus" is 1 in the db it returns -1!! If i run the query in query analyser the correct values are returned. Any ideas???Thanks in Advance
View 2 Replies View RelatedGurus.I do not know if it is possible, but here is what I want to do.I want to allow user to page the SQL result, so he could decides toreturn from row 10 to row 20, or row 100 to 200, without returns thewhole resultset. Every time he sends another request, I do not mind tohit the database again, (I do not want to cache the result in themiddle tier server, scalability issue), and I know that I could achievethis with CURSOR, but unfortunately the FOR XML is not allowed in aCURSOR statement .(I know that I could achieve what I want to do by writing custom codein the middle tier, but I just want to see if there is a way to do thison the database side.)Any comments & suggestion is greatly appreciated.Thanks in advance.(I am using SQL2005)John
View 2 Replies View Relatedwhen I execute the line:
reader = comm.ExecuteReader();
Is there a way to get a count of the number of records returned (the query is a SELECT with no count in it)? I want to vary the display of the results set based on the number of records returned.
For example if no records are returned I want it to display nothing, if one, I want the header to be in the singular, but if more than one record is returned, I want it to display the header in plural form.
Here is my code snippet with further explanation of what I am trying to do:int Inumber = 0;foreach (string item in menuHeaders)
{string title = menuHeaders[Inumber];
sp.Value = menuHeaders[Inumber];
Inumber++;
conn.Open();reader = comm.ExecuteReader(CommandBehavior.CloseConnection);
//Get the culture property of the thread.CultureInfo cultureInfo = Thread.CurrentThread.CurrentCulture;
//Create TextInfo object.TextInfo textInfo = cultureInfo.TextInfo;
// WHAT I AM TRYING TO DO....... Here I would like to wrap this with an if statement, if Records returned by the reader are 0, skip while loop and header display
// If one, then display in singular and if 2 add an s to the title. Convert to title case and display.content.Text += "<H3>" + textInfo.ToTitleCase(title) + "</H3>";while (reader.Read())
{
content.Text += "<a href='" + reader["website"] + "'>" + reader["f_name"] + reader["l_name"] + "</a>"+ ", " +reader["organization"]+"<br />";
}
//Close the connection.
reader.Close();
conn.Close();
}
Dear Friends,
I want your help to know the best way to cache the data of a dropdownbox returned by a SQL Query.(SELECT FIELD FROM DBO.TABLE)
This data returned by database is used in more than one dropdown on multiple pages. I want to cache only the dropdown control, not the entire page. Which is the best way to do it? The data isn't refreshed often, probably once per month.
Could you tell me the best way?
THANKS
I would like to look at the way my data is stored in the page. I have done this for a long time on Sybase, but I am having trouble with the page number on MS SQLServer 2000. I have a 5 row table. When I select INDID and FIRST from SYSINDEXES, I get
indid first
------ --------------
1 0x370300000100
I have tried all manner of gyrations to put this in to the DBCC PAGE command. No matter how I do it, I get an error saying that page is not part of the database, or the format is wrong. From my searching and reading, I think that this actually a combination number, consisting of the file and page number, but I can't see how to separate it. Any assistance would be appreciated. A link to documentation on internals, such as system table details and page formats would be most helpful. I looked in Ken Henderson's book on architecture and internals, and could not find it.
Or is there a DBCC command that will tell me more about the table, and perhaps give me the page number in decimal? So far, I can only find the checkdb gives that info on errors only.
Thanks for looking at this with me.
Doug W
Hunt Valley, Md
I am doing some SELECT queries on my database through ASP, but for example, I only want to return the 50 most recent entries that match the criteria. Is there any easy way to limit the number of results returned?
View 1 Replies View RelatedIam using front page to dispalay my results.
At the bottom it shows me 1/10 i.e 1st page of 10 pages.
but what do i do if i want it to be shown as 1-10 out of 100 (if each page contains 10 results).
or it would be really good if i get count of both no. of recors as well as no. of pages.
1. how to show page number & total page number in report body?
2. how to show total records number?
Hi
I want to enter rows into a table having more number of columns
For example : I have one employee table having columns (name ,address,salary etc )
then, how can i enter 100 employees data at a time ?
Suppose i am having my data in .txt file (or ) in .xls
( SQL Server 2005)
Hi,
I'm using SqlDataSource control.
Is there a way to know how many records a query has returned?
In my ASP page, when I select an option from the drop down list, it has to get the records from the database stored procedure. There are around 60,000 records to be fetched. It throws an exception when I select this option. I think the application times out due to the large number of records. Could some tell me how to limit the number of rows to be returned to avoid this problem. Thanks.
Query
SELECT @SQLTier1Select = 'SELECT * FROM dbo.UDV_Tier1Accounts WHERE CUSTOMER IN (SELECT CUSTOMERNUMBER FROM dbo.UDF_GetUsersCustomers(' + CAST(@UserID AS VARCHAR(4)) + '))' + @Criteria + ' AND (number IN (SELECT DISTINCT ph1.number FROM Collect2000.dbo.payhistory ph1 LEFT JOIN Collect2000.dbo.payhistory ph2 ON ph1.UID = ph2.ReverseOfUID WHERE (((ph1.batchtype = ''PU'') OR (ph1.batchtype = ''PC'')) AND ph2.ReverseOfUID IS NULL)) OR code IN (SELECT DISTINCT StatusID FROM tbl_APR_Statuses WHERE SearchCategoryPaidPaymentsT1 = 1))'
Hi,
Any idea why when I run a SELECT stament in Query anaylser it returns 45 rows. But when I create the exact same SQL as a view in Enterprise manager it only returns 44 rows?
Thanks,
Alph
I am using SQLExecute() in C++ code.
My query is "select * from Revoked_users"?
How I will come to know the no. of rows returned by SQLExecute() ?
The code below returns 0 rows. The statement is intended as generic statement that would return all records between a particular start and end date and on each date only between a specific start and end time. It works perfectly if the end date is greater than the start date.
Unfortunately, if the start and end dates are equal (i.e, return all records on that one date and only between the specified start and end times) then no records are returned.
BTW, it is also looking for matching datetimes in two tables and there really is matching data in the two tables for that particular date and times.
Can anybody help resolve this?
SELECT DISTINCT t1.* FROM [DbName].[SchemaName].[TableName1] AS t1,
[DbName].[SchemaName].[TableName2] AS t2
WHERE t1.[DateTime] BETWEEN CAST('2006-11-22' AS DATETIME) AND CAST('2006-11-22' AS DATETIME)
AND t2.[DateTime] BETWEEN CAST('2006-11-22' AS DATETIME) AND CAST('2006-11-22' AS DATETIME) AND
CONVERT(DATETIME,CONVERT(varchar, t1.[DateTime],114)) BETWEEN
CONVERT(DATETIME, '10:20:00') AND CONVERT(DATETIME, '12:19:59') AND
CONVERT(DATETIME,CONVERT(varchar, t2.[DateTime],114)) BETWEEN
CONVERT(DATETIME, '10:20:00') AND CONVERT(DATETIME, '12:19:59') AND
t1.[DateTime] = t2.[DateTime]
ORDER BY t1.[DateTime];
I have a qry/dataset in a report. If the qry returns no data the report will
simply show a the headers/footers and no data in the detail section. However, I need to display all zeros if the detail section ie '0', if no data is returned. How can I do that?
I have SSRS 2005.
When querying a bit field, I am encountering a problem with MS SQLServer returning a larger number of records for a table than theactual number of records that exist within that table.For example, my customer table has 1 million unique records, so theresults of the following query are as such:select count(customer_nbr) from customer = 1,000,000There is bit field in the customer table that denotes whether acustomer has placed an order with us called. That flag is calledorder_flagIf I run the following query:select count(customer_nbr) from customer where order_flag = 1The result is 3,000,000 records.There is no logical way that this is possible, as my table onlycontains 1,000,000 unique records and the number of customers with anorder should be a subset of this.If a run the above query with a distinct before customer number, I getthe results I want:select count(distinct customer_nbr) from customer where order_flag = 1600,000 records.So while I can get to the answer I want, I have no idea why I amreturning incorrect values if I don't select distinct.Can anyone help? I checked microsoft support and message boards buthaven't seen anything.I should note that the bit field is indexed.I am not sure if that isthe problem or not.
View 1 Replies View RelatedHello and thank you taking a moment. I have created a simple login page where the user will pass credentials. I have a sqldatasource that will query a database to see if the user exists. What I would like to do is have the user click a button after entering their credentials. When the button is clicked I would like the SqlDatasource SelectCommand to fire and if there are rows returned then redirect the user to a new page.
I know I can do this with ADO and a datareader with the HasRows property. But what I would eventually like to do is cache the data and then bind the cached data to a control(like a dataview) on the page the user is redirected to. If anyone can tell me how to get the Select command to fire on a button click I would be eternally grateful. Any help will be greatly appreciated.
Thanks,
Jason
I have a large table with approx 250000 rows in sql 2000. I need toreturn this from an asp page but the query to return this amount ofdata causes the asp to time out before the query completes.Is there any way in ado (or another way useable from asp / vb) that Ican run the query and then fetch a number of rows at a time? I can thene.g. pass the first batch of rows back to the client and then call forthe second batch.Any thoughts appreciated.
View 1 Replies View RelatedHi,I have a select statment that correctly returns zero rows at times. Iwould like to be able to return the value 0 (a single row with thevalue 0) whenever the logic returns zero rows.something like thisIf no.of.rows.returned = 0 thenoutput 0elseoutput query resultsend ifCan anyone poing me in the right direction to do this?many thanks,yohan
View 6 Replies View Related