External Data Connection Timeout (TCP/IP Error 10060)

Feb 29, 2008

Hi,

Im connecting to an AS400 to retrive data with SQL Server 2005. Until now i have not pulled large amounts of data from there. My queries run fine on my local machine in SQL Server 2005 Management Studio. I have run queries for up to an hour or more. The minute i put them in a SP and execute them they time out at 90 sec.

I have a linked server set up to the 400 with the connetion timeout set at 600 and the Query timeout at 600 through port 8471. Is there a port timeout on the server I need to change?

Thanks in advance for any help.

View 3 Replies

Service Broker Application Is Getting Error + Connection Attempt Failed With Error: '10060

Aug 17, 2007

hi ,
i am creating a service broker application between two different instance.when i am initiating a dialog from the source my message remain in the sys.transmission_queue.but its transmission_status column is empty.

i attached the profiler with both source and target by including all the service broker event.

in my source profiler i am getting the error like -- Connection attempt failed with error: '10061(No connection could be made because the target machine actively refused it.)'. with event Broker:connection

and in the target profiler error is --This message could not be delivered because the security context could not be retrieved. with event Broker:Message Undelivarible.

i have checked my port also using telnet with remotely and localy both working fine. i am using port no. 4001
and i have mentioned the port no. in the address of the route.

bt still getiing the error.

please help!!!!!!!!!!!

View 3 Replies View Related

SQLServer Error: 10060 - Please Help!

Jun 28, 2001

Hello All,

Here's a really wierd one for you all. I have two "virtual" SQL Servers running on a Clustered NT Server. I can connect to one server using its IP
address by configuring my client to talk using TCP/IP. However, when I try
to connect to the second server using its IP address after configuring my
client library accordingly. I get an error message like this:-

Unable to connect to server IP address
Server: Msg 11, Level 16, State 1
[Microst][ODBC SQL Server Driver][TCP/IP Sockets] General network error. check your network documentation.

Next, I tried to create an ODBC source and here's the message from the ODBC
Administrator.....

Connection failed:
SQLState:'01000'
SQL Server Error: 10060
[Microst][ODBC SQL Server Driver][TCP/IP Sockets] ConnectionOpen [connect()]
Connection failed:
SQLState: '08001'
SQL Server Error: 11
[Microst][ODBC SQL Server Driver][TCP/IP Sockets] General network error. check your network documentation.

Please someone help!
regards
Uday

View 3 Replies View Related

SQL Connection Timeout Error

Nov 18, 2004

hi, all
These days i met a problem regarding a SQL connection.

i try to create an ODBC to a SQL server, and everytime a prompt of timeout error appear. Detailly it is that...connection failure,SQLState:'HYT00'...
i am sure the logon username and password are right... and i can make it in some machines, but it is surprised that i got failure on the other machines(a error appear just like what i mention above)...i don't know how... i guess something wrong in those machines error showed.

Please help me.

Thx

View 1 Replies View Related

External Activation And Receive Timeout

Oct 31, 2006

I have a set of service broker services setup that rely on external activation to process messages. I'm using the GotDotNet ExternalActivator, and it launches console applications that do the actual retrieval from the queues. The console applications are written to run continuously to avoid the cost of starting up .NET based console apps over and over again.

I am observing very odd timing behavior. With the receive queues empty and the external activator configured to run a minimum and maximum of 5 instances, I observe in SQL Profiler that most of the receive operations finish in about the same amount of time as my WAITFOR command in my receive stored procedure. However, there is usually one receive command that consistently takes upwards of 30 seconds and often causes sql timeout exceptions to be thrown. I know that I could code around this, but I wasn't really expecting this behavior.

Does anyone have any thoughts on why it might be occurring? I would have expected to routinely see my receive operations taking 15 seconds, give or take, especially when the queue is empty. Also, I have observed this behaviour on both SQL 2k5 Express and Dev Editions, so I don't think it's a version thing.

The stored procedure I am using to do the receive is:

Create PROCEDURE [dbo].[P_RTD_MessageBase_Receive]

@receiving_queue_name varchar(255),

@receiving_time_out int

AS

Declare @receiveQuery nvarchar(300)

Set @receiveQuery = 'WAITFOR(RECEIVE * FROM [dbo].['+ @receiving_queue_name +']),

TIMEOUT ' + cast (@receiving_time_out as varchar)

Execute sp_executeSql @receiveQuery

View 6 Replies View Related

Timeout Error With High Speed Connection

May 1, 2001

Hello ,everybody
Please help with our case

1. Client complain ...aplication to slow
They configuration
10 NT connected to 1 SQL server
network speed 10 10 mgb.sec

2. We change network speed to 100 mgb.sec
Our application produce timeout error
3. We connected computer to SQL server using cable
Our application produce timeout error

4. We run aplication on same station with SQL server
The is no error

Query giving error normally runs 1300 -1500 mms with Analyzer
What should we check beside our application

Thanks

View 4 Replies View Related

Intermittent Connection Timeout / General Network Error

Nov 26, 2006

We have a SQL 2005
clustered server (Microsoft Cluster Services) that is queried from 4 IIS6
Windows Server 2003 frontends. Each frontend runs both classic ASP apps
connection with SQL Server ODBC and .NET2 apps connecting with
System.Data.SqlClient. Ocassionaly we get a string of errors/timeouts opening a
connection lasting maybe 2 minutes.

One the classic ASP
apps we log one of these two errors:

Microsoft OLE DB Provider for ODBC
Drivers (0x80004005)
[Microsoft][ODBC SQL Server
Driver][DBNETLIB]General network error. Check your network
documentation

or

Microsoft OLE DB Provider for
ODBC Drivers (0x80004005)
[Microsoft][ODBC SQL Server
Driver]Timeout expired
on the
ADODB.Connection.Open
On the .NET2 apps we
log
Message Timeout expired. The timeout
period elapsed prior to completion of the operation or the server is not
responding.

StackTrace at

System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection
owningObject)
at
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection
owningConnection)
at
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection
outerConnection, DbConnectionFactory connectionFactory)
at
System.Data.SqlClient.SqlConnection.Open()
at
System.Web.SessionState.SqlSessionStateStore.SqlStateConnection..ctor(SqlPartitionInfo
sqlPartitionInfo)

Source .Net SqlClient Data Provider

Any ideas for further debugging?

View 11 Replies View Related

Timeout Expired. The Timeout Period Elapsed Prior To Obtaining A Connection From The Pool

Jan 13, 2008

Server Error in '/' Application.

Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidOperationException: Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached.Source Error:

An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:

[InvalidOperationException: Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached.]
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +1188873
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +413
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
DataCaoZuo.Manage_ResultTB_Caozuo(String comstr) +145
Cls_UserManage.GetAllUserList() +18
Index.Page_Load(Object sender, EventArgs e) +83
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +15
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +34
System.Web.UI.Control.OnLoad(EventArgs e) +99
System.Web.UI.Control.LoadRecursive() +47
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1061

Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832

View 1 Replies View Related

Timeout Expired. The Timeout Period Elapsed Prior To Obtaining A Connection From The Pool.

Feb 5, 2004

Ok bear with me here :). I have a server that is getting about 1000000 hits per day with about 10,000 unique vistors. For the past 2 months I have been revamping my code trying to deal with the increase in traffic. I have 2 boxes, one for the website, and one for the SQL. They are connected through a secure backlink so that I dont have to worry about encrypting the data. So the problem started when I updated the MDAC components a few weeks ago. I started getting these freaking timeout errors, they are up to about 1000 errors per hour. I have been monitoring the connection pooling using the system monitor for about a week and have noticed that I am not maxing out the pooling but I am still dropping connections. I went into the web.config and turned my max connections to 1000. Unfortunately this didn't even put a dent in the problem. It doesn't matter if I have 12 or 212 open connections it still drops them. I am at my wits end with trying to debug this problem. I am wondering if anyone else has had similiar problems recently. Also on a side note I have checked all my connections to make sure that I am closing them. Not only do I close my datareaders but I also set them to nothing. In addition to closing and reseting my datareaders I am also disposing and reseting my connection objects as well as closing them. Any help would be greatly appreciated.

Thanks,
Daniel Christoffersen

View 3 Replies View Related

SSIS Connection Manager General TimeOut Vs Command Timeout

Oct 15, 2007

Hi All,

This is first time I am trying to ste timeout on SSIS package ,Can some one let me know which is the best way to set timeout for connection?
And what is the difference between General TimeOut and Command TimeOut?

Thanks,
Shilpa

View 4 Replies View Related

DB Engine :: Test Connection Failed Because Of Error In Initializing Provider / Login Timeout Expired

Jul 8, 2015

Have 6 SQL Server 2012 failover clusters environments on Windows 2012 R2 standard edition.Have intermittent connectivity issues when using Windows Authentication, with the error "test connection failed because of an error in initializing provider. login timeout expired" . Am checking by using a UDL file and have tried the below.

1) Have made port changes to use static 1433 port.
2) Have enabled shared memory and using Named Pipes and TCP/IP by using cliconfig.
3) Have turned off firewall.
4) Loopback is disabled
5) SQL Browser is running, have changed 'Built in Account setting' from 'Local Service' to 'Network Service'. but with no effect.

Still I am getting intermittent connectivity issues.

View 5 Replies View Related

Error: The External Metadata Column Collection Is Out Of Synchronization With The Data Source Columns

Apr 17, 2007

Hello,

I have a SSIS package with a Data Flow task. This task transfers the data from SQL Server 2000 to a table in SQL Server 2005.

I deployed and tested this package on the Test Server. Then put this package in a job and executed it - Works fine.

On the production server- If I execute the package through DTEXECUI, it works fine. But when I try executing it through a job- the job fails and it gives me following error:

Description: The external metadata column collection is out of synchronization with the data source columns. The "external metadata column "T_FieldName" (82)" needs to be removed from the external metadata column collection....

What I don't understand is, why are there no errors displayed when I execute the package through DTEXECUI.

Can anyone help me to resolve this issue.

Thanks.

View 3 Replies View Related

Timeout Expired. The Timeout Period Elapsed Prior To Obtaining A Connection From The Pool. This May Have Occurred Because All Pooled Connections Were In Use And Max Pool Size Was Reached.

Feb 11, 2004

What does this error message imply?

View 3 Replies View Related

Making Changes To A Table With Lots Of Data. Timeout Error?!

Oct 11, 2006

Hello,

I have a table that is fairly large, and I need to make a change to one of the columns in the table. Namely I need to change the datatype and rename that column. When I try to save the updated table, I keep getting a timeout error that says.

'eligibility (dbo)' table
- Unable to create index 'PK_eligibility'.
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.

Any ideas on how to make the table change more efficient or change the timeout period. I need to keep the existing data in the table. I am using sql server managment studio(2005) connected to a sql server 2000 database.

Thanks!

View 7 Replies View Related

Error : Timeout Expired. The Timeout Period Elapsed Prior To Completion Of The Operation Or The Server Is Not Responding.

Jul 3, 2007

Hi,
I am running a stored procedure that collects some records from two tables do some calculations with those records and insert those calculation result in a temp. table. I am calling this stored procedure in my aspx page and then later select all the records from temp table and show it in a table.
When I run this application on browser it give me Timeout expired error but whn I execute the stored procedure it runs properly but takes around 3:10 mins to execute in query analyzer. I did some google work and based on that I specified CommandTimeout = 300 for SP and Connection timeout=400 in web.config. But still it didnt worked. Sometimes it runs properly but sometimes its not.
Where I am doing mistake? and Wht should i do to resolve this? Plz. help.
Thanks in adv.
Regards,
Yogita

View 1 Replies View Related

Error: Timeout Expired. The Timeout Period Elapsed Prior To Completion Of The Operation Or The Server Is Not Responding.

Dec 26, 2007

Guys,
I am trying to attach a database object to the App_Data directory I got thie error
Error: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
This is what I did. I right click the App_Data folder and click Add New Item. Then I click the SQL Database. This is where I got the error.
What should I do? Please help

View 2 Replies View Related

Error : Timeout Expired. The Timeout Period Elapsed...

Nov 10, 2006

Hi,I
get this error from our web application every once in a while. " Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding". I email
myself when an error occurs, and once every 2-3 days I get this timeout
error emails, like 5-10 emails in a span of few minutes. Then it goes
away. I have set the command timeout for 60 secs.
It
doesn't happen from the same stored procedure, actually I have seen it
timeout from really simple 1 or 2 line stored procedures, which shouldn't normally take 1 sec. Its like
sql server just shuts down for few minutes. We have some
backups and maintenance jobs scheduled, but they run only after
midnight. I have checked the
application event viewer, there are no warnings or
error messages for MSSQLSERVER. Can
any one tell me how to check whats going on during that short timespan
when timeout error occurs, and what causes it? I don't want to run sql
profiler continuously for 2-3 days, I am afraid it will slow down the
server more. Thanks.

View 3 Replies View Related

Error: System.Data.SqlClient.SqlException: Timeout Expired.

Apr 8, 2008

Hi,
I am getting an time out expired error while import dbf files to the database.. In this upload one file had 379 records.. and it inserts it into the few tables and then i get the above error..in my event viewer.
Error: System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
No Changes made to the Plan table.
Inserting records(s) in Plan table.
No Changes made to Plan table.
Updating changes to PlanStatementInfo.
Updated 1 record(s) in PlanStatementInfo.
Inserting new records into PlanStatementInfo.
No new records were added to PlanStatementInfo.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ApplicationBlocks.Data.SqlHelper.ExecuteNonQuery(SqlConnection connection, CommandType commandType, String commandText, SqlParameter[] commandParameters)
at Microsoft.ApplicationBlocks.Data.SqlHelper.ExecuteNonQuery(String connectionString, CommandType commandType, String commandText, SqlParameter[] commandParameters)
at Microsoft.ApplicationBlocks.Data.SqlHelper.ExecuteNonQuery(String connectionString, String spName, Object[] parameterValues)
at icc.BaseClasses.DL.DLImportPlan.Import(Int32 ClientId, Int32 PeriodId, Int32 UserId) in C:Documents and SettingsMy DocumentsPlanStatementsImportDLDLImportPlan.cs:line 116

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.cs:line 116 --this is where i am calling my sproc...
any help will will appreciated
Thanks,
Karen

View 4 Replies View Related

Timeout Expired Error Occuring While Fetching The Data With SQL Server 2000

Sep 12, 2005

Hello,I have one application which is having written in asp.net & plain asp.I am having one button on asp page,when i will click on that button, then itwill execute one other asp page.And after the execution of that second asp page, I redirect it to someASPX page with some values.On the ASPX page, it will connect to the Database, and insert the values.Thus, sometime, the following error is occuring :"Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding."Main thing is that i am testing it on my local machine, then also it is giving me this error ...Insert into statement is also not much complicated :just I inserted three values in one table.Is this occuring due to the mixer of asp & aspx??Plz give me some proper solution.I want it in efficient manner, because this application will be accessed by number of users at the same time.Plz help me.Thanks,Sandy

View 3 Replies View Related

How To Setup The Connection To An External SQL/DB2 Database

Jan 23, 2002

Hello,

How does one setup the connection to an external SQL/DB2 database? Any help would be appreciated.

Thanks,
Faustina
ifedif@mail.nih.gov

View 1 Replies View Related

System.Data.SqlClient.SqlException' Timeout Expired The Timeout Period Elapsed Prior To Completion Of The Operatio Or The Server Is Not Responding

May 19, 2008

Hi Everyone,
I have an ASP.Net webpage for uploading multiple files. The process is, when the client uploads files..using SQL queries I am inserting into a database1 and then calling a stored procedure to remove garbage data from database1 and insert this new data into a production database(Database2).
When the file size is aroung 6-7MB it executes fine....but when the size increases to 30 MB I can see the data in Database1 but only when the Stored procedure is called...after a minute or so, I get the following error in the analyser.
I a getting the following error:Error System.Data.SqlClient.SqlException Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
No Changes made to the ClientPlan table.
Inserting records(s) in ClientPlan table.
No Changes made to ClientPlan table.
Updating changes to PlanStatementInfo.
Updated 1 record(s) in PlanStatementInfo.
Inserting new records into PlanStatementInfo.
No new records were added to PlanStatementInfo.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ApplicationBlocks.Data.SqlHelper.ExecuteNonQuery(SqlConnection connection, CommandType commandType, String commandText, SqlParameter[] commandParameters)
at Microsoft.ApplicationBlocks.Data.SqlHelper.ExecuteNonQuery(String connectionString, CommandType commandType, String commandText, SqlParameter[] commandParameters)
at Microsoft.ApplicationBlocks.Data.SqlHelper.ExecuteNonQuery(String connectionString, String spName, Object[] parameterValues)
at icc.BaseClasses.DL.DLImportPlan.Import(Int32 ClientId, Int32 PeriodId, Int32 UserId) in CDocuments and SettingskroslundMy DocumentskareniccPlanStatementsiccImportDLDLImportPlan.csline 116

Please help me.

View 3 Replies View Related

Connection Manager Keeps External Metadata Information

Mar 2, 2007

We have a Main package and which is calling 2 more other packages.
The first package contains a connection and we are using a Dataflow task. The data flow task has OleDB Data source which is taking getting columns using a Stored Procedure. And the output we need to write in a Flat File.

The second Package also contains the same(The same Tasks, Database and Stored Procedure Calling)
The difference is in the stored procedure Parameters. Based on the different parameters Stored procedures returns the different Columns and Rows output.
When we are trying to Get the second package output in OleDb Data source it shows all the columns which is the output of the First Package because it stores External Meta Data.

So My understanding is the Connection to the same database keeps the External metadata information with the connection and because of that it is always getting the same output columns in Ole DB Data source task in the second Package also.

How to Get my correct output from the second package in this case?
Or If we dont want to store external Meta data with the Connection then is that possible? If yes then How?

Thanks in advance.

View 4 Replies View Related

Acknowledgement Won't Send: An Error Occurred While Receiving Data: '121(The Semaphore Timeout Period Has Expired.)'.

Aug 17, 2007

Any idea of what this means?

My acknowledgement messages are getting stuck in sys.transmission_queue. In profiler, the message generated by the target server (the one sending the ack) is:

This message could not be delivered because it is a duplicate.

The result of the function GET_TRANSMISSION_STATUS is

An error occurred while receiving data: '121(The semaphore timeout period has expired.)'.

Each time I send a new mesage I get one record in sys.conversation_endpoints and two in sys.transmission_queue. The two records in the transmission_queue are the same except one has a NULL for the message body and is_end_of_dialog=1

If I try to clean out the queues they re-populate (I guess becasue the initiator keeps re-trying the message?)

I have double checked my routes back to the initiator and they seem correct (see below). In fact, a second server is using an identical route and it is working OK.

The only thing tricky on this machine is added a second message queue for a differnet kind of message, and it is replying to a different service broker instance. In other words, on server A, database "Production" sends a message to server B, database "Destination" and Server A, database "Schedule" also sends a message to server B, database "Destination".

In the respective return routes I have double checked the guid for the broker_instance.

The broker_instance value in each return route is right out of server A's sys.databses view:

name service_broker_guid

-------------------------------------------------------------------------------------------------
Production 3BE812A8-5212-45D2-8664-521F83689585

Schedule 86113D85-A594-4EAB-8460-3E459EE8F055

The return routes look like this:

CREATE ROUTE [SendReplyProduction] AUTHORIZATION [mssqlssb]

WITH SERVICE_NAME = N'//mycompany.com/SSB/Services/ProductionChangeService' ,

BROKER_INSTANCE = N'3BE812A8-5212-45D2-8664-521F83689585' ,

ADDRESS = N'TCP://Server_A:4022'

The above route should send the reply to the "Production" database on Server A

CREATE ROUTE [SendReplySchedule] AUTHORIZATION [mssqlssb]

WITH SERVICE_NAME = N'//mycompany.com/SSB/Services/ScheduleChangeService' ,

BROKER_INSTANCE = N'86113D85-A594-4EAB-8460-3E459EE8F055' ,

ADDRESS = N'TCP://Server_A:4022'

The above route should send the reply to the "Schedule" database on Server A

Is this the correct way to do it? And can anyone tell me why I get the semaphore error?

For what it is worth, I am using Transport security only with windows authentication (both machines on the same domain and no certificates)

Thanks for any help!
John

View 1 Replies View Related

Power Pivot :: External Access To Data Sets In The Data Catalog?

Apr 23, 2015

I'm currently working on a BI architecture for a customer, and consider to propose the Power BI data catalog as a data distribution layer. The customer will use Power BI, but also has other BI tools.

Are data sets in the data catalog available to other clients than Power Query alone? E.g. are there OData feed endpoints available? If not, what would be the best way to give other tools access to the data?

View 3 Replies View Related

XML Data Source .. Expression? Variable? Connection? Error: Unable To Read The XML Data.

Feb 23, 2008

RE: XML Data source .. Expression? Variable? Connection? Error: unable to read the XML data.

I want my XML Data source to be an expression as i will be looping through a directory of xml files.

I don't see the expression property or the connection property??

I tried setting the XMLData property to @[User::filename], but that results in:

Information: 0x40043006 at Load XML Files, DTS.Pipeline: Prepare for Execute phase is beginning.
Error: 0xC02090D0 at Load XML Files, XML Source [108]: The component "XML Source" (108) was unable to read the XML data.
Error: 0xC0047019 at Load XML Files, DTS.Pipeline: component "XML Source" (108) failed the prepare phase and returned error code 0xC02090D0.
Information: 0x4004300B at Load XML Files, DTS.Pipeline: "component "OLE DB Destination" (341)" wrote 0 rows.
Task failed: Load XML Files
Information: 0xC002F30E at Bad, File System Task: File or directory "d:jcpxmlLoadjcp2.xml.bad" was deleted.
Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
The program '[3312] Package.dtsx: DTS' has exited with code 0 (0x0).

Thanks for any help or information.

View 3 Replies View Related

SQL Connection Timeout ?????

Mar 1, 2006

Greetings everyone,
I am working on an intranet application that executes a very intenstive stored procedure and, on average, takes approximately 30mins to complete execution. I set the connection timeout property of my connection string to 1900 (31 mins) and <httpRuntime executionTimeout=n> to 1900 as well. The application fails almost immedately giving me this error:
The error message:
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
The error stack trace:
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, TdsParserState state)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, TdsParserState state)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning()
at System.Data.SqlClient.TdsParser.ReadNetlib(Int32 bytesExpected)
at System.Data.SqlClient.TdsParser.ReadBuffer()
at System.Data.SqlClient.TdsParser.ReadByte()
at System.Data.SqlClient.TdsParser.ProcessDone(SqlCommand cmd, RunBehavior run)
at System.Data.SqlClient.TdsParser.Run(RunBehavior run, SqlCommand cmdHandler, SqlDataReader dataStream)
at System.Data.SqlClient.SqlDataReader.get_HasMoreRows()
at System.Data.SqlClient.SqlDataReader.Read()
at System.Data.Common.DbDataAdapter.FillLoadDataRow(SchemaMapping mapping)
at System.Data.Common.DbDataAdapter.FillFromReader(Object data, String srcTable, IDataReader dataReader, Int32 startRecord, Int32 maxRecords, DataColumn parentChapterColumn, Object parentChapterValue)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable, IDataReader dataReader, Int32 startRecord, Int32 maxRecords)
at System.Data.Common.DbDataAdapter.FillFromCommand(Object data, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable)
at SALEntry.DataAccess.getDataSet(String strConnection)
at SALEntry.sal_preXakt.btnSubmit_Click(Object sender, EventArgs e)
I tried to check the current activity log through Enterprise Manager but was unable to as I got an error saying that it was locked however once 31 mins expired, the lock was removed? Any ideas on how to resolve these issues?

View 2 Replies View Related

Connection Timeout

Jan 21, 2005

We recently moved our SQL Server to a faster machine. Everything is working great except every once in a while we get a connection timeout to the sql server. Everything else seems to be performing better but that initial connection is taking longer.

I realize this could be caused by a great deal of things, but if anybody has any suggestions I would appriciate it.

Thanks much.

View 1 Replies View Related

Connection Timeout

Apr 25, 2007

Hi, I have a client application that submits heavy processing query to an instance of Sql Server 2005 (Enteriprise Edition). After a few seconds the following exception is raised: "The time available has expired before the completion of the operation or the server is not responding". If I submit to the same application light processing queries the exception is not raised.
The client application is written in VB.net and uses ADO.net. (SqlConnection, SqlCommand,.. classes). The "Timeout connection" property is set to 1000.
Any suggestion?
Thank you.

View 1 Replies View Related

Connection Timeout

Nov 16, 2006

In one of my applications I want to set a connection timeout to 1 second when connecting to the SQL Server. .NET's SqlConnection already has connectiontimeout property as readonly and set to 15 seconds. So I cant use it. And if I use adodb.dll and its ADODB.Connection, this time I can set the objects connectiontimeout property. However, it just doesn't work. It still waits along time even though I set the connectiontimeout to 1 second. The same goes when you try the same thing in Delphi.

Anyone has any idea about this problem?

View 3 Replies View Related

Connection Timeout - Need Help

Jun 9, 2006

Hello,

My app uses sql express on the client work station and has been installed by our application installer as a part of the prerequisites. The sql express install in standard and we've not changed any settings or brought in any tweaks.

All is well in our dev center. However, some of our clients are experiencing a problem when the app starts up. After the PC has been restarted, running the application causes it to crash with a connection time out. However, running it a second time will work with absolutely no issues.

Overall - after a restart, the first sql express connection will time out. I had a post on this earlier here -> http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=93279&SiteID=1

MS Lee had suggested -- > "As for the first connection failing and subsequent connections succeeding, one potential cause is the cached last connect information. If you're connecting to a named instance and not specifying a port, then the client will determine the port by querying SQL Browser on the server"

I'm not using a remote sql express. It is running on the local machine. My connection string looks like -->

"Integrated Security=True;User Instance=True;Data Source=.SQLExpress;AttachDBFilename=<%USERS_LOCAL_FOLDER%>;"

What may be the problem ? Any help/advise will be great. I'll need to sort this out ASAP.

Thanks,

Avinash

System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.

at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)

at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)

at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error)

at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj)

at System.Data.SqlClient.TdsParserStateObject.ReadPacket(Int32 bytesExpected)

at System.Data.SqlClient.TdsParserStateObject.ReadBuffer()

at System.Data.SqlClient.TdsParserStateObject.ReadByte()

at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)

at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)

at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)

at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)

at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)

at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)

at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)

at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)

at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)

at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)

at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)

at System.Data.SqlClient.SqlConnection.Open()

at ***.**.Base.DataServices.DataFactory.SQLProvider.GetConnection(String connectionString) in c:DevNetSCAH***.**.Base.DataServicesDataFactorySQLProvider.cs:line 30

at ***.**.Base.DataServices.DalContext.OpenConnection() in c:DevNetSCAH***.**.Base.DataServicesDALContext.cs:line 166

at ***.**.Base.DataServices.DataManager.GetTable(String sql, String tableName, DataSet dataSet) in c:DevNetSCAH***.**.Base.DataServicesDataManager.cs:line 93

View 9 Replies View Related

Set The Data Source Of Data Flow From External Application (C#)

Jan 11, 2006

I am new to SSIS programming, so bear with me if my question seems naive to you gurus. I have a situation that needs to set the data source for a data flow from external .NET application ('external' means that the application will run on different process than the SSIS). I am trying to set the data source on which the data flow works from my C# application in a DataSet format. Ideal solution is not to save the DataSet to any file on harddisk (I know that will work, but has the overhead of writing, reading and managing the temp file). What I want to achive is that the business logic of picking data for SSIS Data Flow to process is controlled inside my C# application, the Data Flow just does what it does best - Transformation. Have any of you successfully done this before?. Thanks!

View 1 Replies View Related

SQL Server And ASP.net - Connection TimeOut

Aug 13, 2007

Every few days we have to restart SQL Server because our users are experiencing timeouts and very slow page loads. Does anyone have ideas on fixing this?

View 7 Replies View Related

Server Connection Timeout

Jul 2, 2015

I have been facing a ridiculous problem that I am able to connect SSMS but can't work properly in a particular server. It throws the following error message.

A transport-level error has occured when receiving results from the server. (provider: TCP Provider, error: 0 - The semaphore timeout period has expired.) (Microsoft SQL Server, Error:121)

There are total 13 SQL Servers in my work station. I can access and work on rest 12 servers via SSMS. I can remotely access that server and get reply from ping.I have restarted SQL Server & SQL Agent Services. Even I have restarted the server itself. But no result yet.

View 9 Replies View Related